Error in the implementation

I wrote the followring method:
public void sendMail( )  {
    //@@begin sendMail()
       String host =" "; // Specify the host
     // Get the From Address
     String from = wdContext.currentContextElement().getFromAddress();
     // Get the To Address
     String to = wdContext.currentContextElement().getToAddress();
     // Initialize Session
     Properties props = System.getProperties();
     props.put("mail.smtp.host", host);
*     Session session = Session.getDefaultInstance(props, null);*
     // Create new MimeMessage
*     MimeMessage message = new MimeMessage(session);*
     try {
          // Set the From Address
*          message.setFrom(new InternetAddress(from));*
          // Set the To Address
          message.addRecipient(message.RecipientType.TO,
          new InternetAddress(to));
          // Set the Subject
          message.setSubject("Test Mail");
          // Set the Text
          message.setText(wdContext.currentContextElement().getTextMessage());
          // Send message
          Transport.send(message);
          messageMgr.reportSuccess("Mail Sent Successfully");
          } catch (AddressException e) {
          messageMgr.reportException(e.toString(),false);
          } catch (MessagingException e) {
          messageMgr.reportException(e.toString(),false);
    //@@end
The problem is that it complains on: Session, MimeMessage, InternetAddress, AddressException and MessagingException. Why is it doing that Should I have done something before?

As I said earlier, please add 3 jar files, viz., smtp.jar, activation.jar, mail.jar
Please use below mentioned code:
String strMailDetail[] = new String[10];
StringBuffer strMailBody;
try
strMailBody = new StringBuffer();
Properties props;
Session session;
Provider p;
String strSMTPIPAddress =  // Enter SMTP Server address here
java.util.Date todayDate = new java.util.Date();
// Get System Properties
props = System.getProperties();
// Setup SMTP Mail Server
props.put("mail.smtp.host", strSMTPIPAddress);
// Get session without Authenticator
session = Session.getDefaultInstance(props, null);
p = session.getProvider("smtp");
Message message = new MimeMessage(session);
message.setFrom("email_ID");
message.addRecipient(Message.RecipientType.TO, "email_ID");
message.addRecipient(Message.RecipientType.CC, "email_ID");
MimeBodyPart mbp = new MimeBodyPart();
mbp.setText(strMailBody.toString());
Multipart mt = new MimeMultipart();
message.setContent(mt);
message.setSentDate(new java.util.Date());
//Send message
Transport.send(message);
catch (Exception e)
wdComponentAPI.getMessageManager().reportException(e+" in Send Mail method", false);

Similar Messages

  • Error in the implementation of Business Package

    Hi
       I have uploaded a business package for SALES. but once i take the preview of the iviews i am getting the following error.
    Messages:
    Error loading template 0TPL_IVIEW_PUR_C01_Q0013_V01
    I have created a SAP_BW system for that.
    Anyone who has worked on this please help me.
    Rajeev.

    Hi Rajeev,
    First, you can active this template in the SAP BW systems.
    In the system SAP BW across of the follow steps:
    1.- Run the transaction RSA1
    2.- Look by type of object and you should find "Web template"
    3.- Across of the option "Search", Could look the template 0TPL_IVIEW_PUR_C01_Q0013_V01
    4.- Finally, this template you have that active
    After, can you test in the portal.
    I hope that with this change the Business package work
    Regards
    Dayana
    Message was edited by: Dayana Valero

  • Error in the implementation of Business Package EBP30

    HI
    I am doing the implemantation of BP EBP30.My Portal version is EP6.0 SP9.0. I have created a SAP BW system.All the connections are working fine(Connection test ,WAS connection and ITs connection)
    Following is the error that i am geting
    <b>What has happened?
    The URL http://servername:port/sap/bc/gui/sap/its/webgui/commpr02/! was not called due to an error.
    Note
    The following error text was processed in the system BWD : System error
    The error occurred on the application server cgnsap04_BWD_00 and in the work process 0 .
    The termination type was: ABORT_MESSAGE_STATE
    The ABAP call stack was:
    Function: ICF_ATTACH_ITS_PLUGIN of program SAPLHTTP_RUNTIME
    Form: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    </b>
    DO help me.Points will be awarded to helpful answers
    Regards
    Rajeev.

    Well for a start I would log on to the EBP system (BWD - server cgnsap04) and run transaction code ST22.  In there you will find a short dump with the error ABORT_MESSAGE_STATE.
    See if there is anything in there that gives you a hint and also search SAP notes.
    I would also check that all of the relevant services in SICF have been activated - it should say which in the installation guide.
    Paul

  • Error while activating the Implementation class of a BADI ?

    Hello,
    I am trying to activate a BADIi but its implementation class(ZCL_IM_DSD_ADD_CUST_IN_DNL) is not getting activated and giving the following object error on activation.
    CPUB     ZCL_IM_DSD_ADD_CUST_IN_DNL
    and it says that  "INCLUDE report "ZCL_IM_DSD_ADD_CUST_IN_DNL====CL" not found , where "DSD_ADD_CUST_IN_DNL" is the Impl. name of the definition "/DSD/ME_BAPI"  implementing the interface "/DSD/IF_EX_ME_BAPI".
    what am i missing here. Big time help will be extremely appreciated ..
    Thanks a ton.

    Hi,
    I had a quick qn,
    Normally, the implementation name should start with Z. Can you create using the name 'DSD_ADD_CUST_IN_DNL' ? or are you using any access key (SSCR)?
    For the infm, I have just tried to create one Z  implementation in my system and it works fine. Could you please delete the current implementation and try it once again ?
    Regards,
    Selva K.

  • I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?

    I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?     
    I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

    Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
    ..Step by Step to fix your Mac
    Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
    Most commonly used backup methods
    If you do need to do a wipe and install
    How to erase and install Snow Leopard 10.6
    For Snow Leopard Speed Freaks

  • Error:The Implementation options are either not available or invalid

    Hi,
    While opening projects in Project Module it give an error as below:
    The Implementation options are either not available or invalid
    Please guide me how to resolve it.
    Thanks
    Regard's
    Haresh

    Hi
    Implementation Options are part of the set up required for implementing Oracle Projects.
    You must complete this setup before continuing with PJM processes.
    Dina

  • Problem Create ANE,ArgumentError: Error #3500: The extension context does not have a method with the name

    I little confuse about build ANE, I already follow all the direction, but the error always #3500 when I try to call the ANE.
    I create ANE using java android.
    The tools I use : Flash Builder running on Win-64 win.7. I think I must straight to the point, here what i made it first step by step;
    1. I create the JAVA application first, with package senigo.extension.android then I create 3 file, Sample.java, SampleContext.java, PassTextFunction.java
    Sample.Java Source Code
    package senigo.extension.android;
    import android.util.Log;
    import com.adobe.fre.FREContext;
    import com.adobe.fre.FREExtension;
    public class Sample implements FREExtension {
      @Override
      public FREContext createContext(String arg0) {
      // TODO Auto-generated method stub
      Log.i("Sample", "createContext");
      return new SampleContext();
      @Override
      public void dispose() {
      // TODO Auto-generated method stub
      Log.i("Sample", "Dispose");
      @Override
      public void initialize() {
      // TODO Auto-generated method stub
      Log.i("Sample", "Initialize");
    SampleContext.Java Source Code
    package senigo.extension.android;
    import java.util.HashMap;
    import java.util.Map;
    import android.util.Log;
    import com.adobe.fre.FREContext;
    import com.adobe.fre.FREFunction;
    public class SampleContext extends FREContext {
      public SampleContext()
      Log.i("SampleContext", "constructor");
      @Override
      public void dispose() {
      // TODO Auto-generated method stub
      Log.i("SampleContext", "dispose");
      @Override
      public Map<String, FREFunction> getFunctions() {
      // TODO Auto-generated method stub
      Log.i("SampleContext", "getFunctions");
      Map<String, FREFunction> functionMap = new HashMap<String, FREFunction>();
      functionMap.put("passText", new PassTextFunction());
      return functionMap;
    PassTextFunction.Java Source Code
    package senigo.extension.android;
    import com.adobe.fre.FREContext;
    import com.adobe.fre.FREExtension;
    import com.adobe.fre.FREFunction;
    import com.adobe.fre.FREObject;
    public class PassTextFunction implements FREFunction {
      @Override
      public FREObject call(FREContext arg0, FREObject[] arg1) {
      // TODO Auto-generated method stub
      FREObject result = null;
      try{
      result =  FREObject.newObject("Hello World");
      }catch(Exception e)
      return result;
    after all the file I create the jar file using click right on the tree view >> Export >> Jar File >> Sample.Jar (i already create jar file that just contain the src folder and after i frustrated, i create .jar file contain all the whole project folder but still didn't work out).
    Ok, After that I create project Flex Library Project, That's contain the actionscript to call the native and the extension.xml, here the code.
    Test.as Source Code, FYI : i already create public function and the static function the error still same #3500.
    package senigo.extension.android
      import flash.external.ExtensionContext;
      public class test
      private static var extContext:ExtensionContext = null;
      public function test()
      trace ("Test Constructor");
      if (!extContext)
      initExtension();
      public static function get passText():String
      trace ("Test Pass Text");
      if (!extContext)
      initExtension();
      return extContext.call("passText") as String;
      private static function initExtension():void
      trace ("Vibration Constructor: Create an extension context");
      extContext = ExtensionContext.createExtensionContext("senigo.extension.android", null);
    extension.xml source code
    FYI: in Flex when i put the Native Extension, they said must have Windows-x86 so I already create 3 ANE, that just contain Android-ARM , Contain Android-ARM and Default, Contain Android-ARM,Default and Windows-x86 but the error still same. I didn't got it where is the error.
    <extension xmlns="http://ns.adobe.com/air/extension/3.1">
      <id>senigo.extension.android</id>
      <versionNumber>1.0.0</versionNumber>
      <platforms>
      <platform name="Android-ARM">
      <applicationDeployment>
      <nativeLibrary>Sample.jar</nativeLibrary>
      <initializer>senigo.extension.android.Sample</initializer>
      <finalizer>senigo.extension.android.Sample</finalizer>
      </applicationDeployment>
      </platform>
      <!-- <platform name="Windows-x86">
      <applicationDeployment>
      <nativeLibrary>sample.jar</nativeLibrary>
      <initializer>senigo.extension.android.Sample</initializer>
      <finalizer>senigo.extension.android.Sample</finalizer>
      </applicationDeployment>
      </platform>
      -->
       <platform name="default">
    <applicationDeployment/>
    </platform>
      </platforms>
    </extension>
    After I create it, I copy the .swc file and extension file sample with the Sample.jar file.
    I extract the .swc file, copy the library.swf to folder Android-ARM,Default,Windows-86 and I create build.bat that contain the command like this
    adt -package  -storetype PKCS12 -keystore senigo.p12 -storepass l10nk1ng -target ane senigo.extension.android.ane extension.xml -swc AndroidLib.swc -platform Android-ARM -C ./Android-ARM/ . -platform default -C ./default/ .
    the I put the ane to Flex mobile project that I created:
    I run it but got error #3500, I really confuse?? what's wrong with my code? is there something I wrong or I Miss it?
    Please any one help me.. and when is already ane file can I debug it in Flex Mobile Project? I wanna looks the log.i code that i wrote but i confuse how to looking up in flash builder.
    at the end, I wanna said Sorry if my english not very goods, and thanks, because wanna see my problem and thank you very much if You can gave me a solution's

    Alex Rekish wrote:
    Why you comment Windows-x86 in your extension.xml ?
    I think that is a problem. You launch your application on Windows but ANE haven't got Windows-x86 implementation (also you don't include it while packaging). So your application use default implementation. But default implementation don't use any native code and cannot use ExtensionContext. And you got error.
    If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation.
    Thanks for you answer Alex Rekish, Sorry I didn't screen shoot all about the extension.xml. I comment it because the latest ANE that I build is contain Android-ARM and default. so I commented. but I already try it using just ANE that's just contain Android-ARM, with Android-ARM and windows-x86,and Android-ARM, and default, and Android-ARM,default,Windows-x86 the error still the same.
    here the screen shoot, I embeded the ane that's i contain Windows-x86
    in action script test.as I didn't change it anythings, I just play it on extension.xml to build the ane. is there any mistake over there? I interact with your answer that "If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation." I didn't need to user ExtensionContext? is means? in the actionscript? or in extension.xml? can you explained

  • Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

    Hi All,
    I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
    new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
    "Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
    Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
    Thanks

    Hi PMunshi,
    According to your description, you get the above error when processing the time dimension. Right?
    In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
    reason. Please change the setting in Proactive Caching into "MOLAP".
    Reference:
    How To Implement Proactive Caching in SQL Server Analysis Services SSAS
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
    TechNet Community Support

  • Dboraslib.dll - Error 126 : "The specified module could not be found."

    Hi,
    After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
    The dev_disp trace file shows the following error:
    Please do help to resolve this problem.
    trc file: "dev_disp", trc level: 1, release: "640"
    Mon Aug 09 12:14:43 2004
    kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
    length of sys_adm_ext is 524 bytes
    ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    1
    intno      0
    make:      multithreaded, Unicode
    pid        2908
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
         shared lib "dw_xml.dll" version 1 successfully loaded
         shared lib "dw_xtc.dll" version 1 successfully loaded
         shared lib "dw_stl.dll" version 1 successfully loaded
         shared lib "dw_gui.dll" version 1 successfully loaded
    Mon Aug 09 12:14:48 2004
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3878]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2506872     (12472)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (372)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
    DpShMCreate: allocated sys_adm at 06440040
    DpShMCreate: allocated wp_adm at 06441B58
    DpShMCreate: allocated tm_adm_list at 06444478
    DpShMCreate: allocated tm_adm at 064444A0
    DpShMCreate: allocated wp_ca_adm at 066A8518
    DpShMCreate: allocated appc_ca_adm at 066AE2D8
    DpShMCreate: allocated comm_adm_list at 066B0218
    DpShMCreate: allocated comm_adm at 066B0230
    DpShMCreate: allocated vmc_adm_list at 066F6F00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 066F6F28
    DpShMCreate: allocated wall_adm at 066F6F30
    MBUF state OFF
    Mon Aug 09 12:14:49 2004
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
    <ES> 613 blocks reserved for free list.
    ES initialized.
    Mon Aug 09 12:14:52 2004
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3216
      argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1352
      argv[5] = -DLISTEN_PORT=1353
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=SXI
      argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
      argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
    ***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
    Mon Aug 09 12:14:54 2004
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 1
    Release check o.K.
    Mon Aug 09 12:15:33 2004
    ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
    ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
    ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-3224 (SIGUSR2)
    ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
    killing W1-3232 (SIGUSR2)
    ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
    killing W2-3240 (SIGUSR2)
    ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
    killing W3-3248 (SIGUSR2)
    ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
    killing W4-3256 (SIGUSR2)
    ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
    killing W5-3264 (SIGUSR2)
    ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
    killing W6-3272 (SIGUSR2)
    ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
    killing W7-3280 (SIGUSR2)
    ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:43 2004
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Mon Aug 09 06:45:43 2004
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3224 Ended         no      1   0             0                                                             
    1 DIA     3232 Ended         no      1   0             0                                                             
    2 UPD     3240 Ended         no      1   0             0                                                             
    3 ENQ     3248 Ended         no      1   0             0                                                             
    4 BTC     3256 Ended         no      1   0             0                                                             
    5 BTC     3264 Ended         no      1   0             0                                                             
    6 SPO     3272 Ended         no      1   0             0                                                             
    7 UP2     3280 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    since last update     total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:48 2004
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
    killing process (3216) (SOFT_KILL)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiSelClear: removed hdl 3 from selectset
    DpDelSocketInfo: del info for socket 3 (type=7)
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 456
    NiSelClear: removed hdl 4 from selectset
    DpDelSocketInfo: del info for socket 4 (type=9)
    NiBufClose: clear extensions for hdl 4
    NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 4 / socket 448
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (3172) (SOFT_KILL)
    Stop icman
    killing process (3196) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process lives  (PID:3172  HANDLE:472)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:49 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3172  HANDLE:472)
    [DpProcDied] Process died  (PID:3196  HANDLE:464)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:50 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:51 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:52 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:53 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:54 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:56 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:57 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:58 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:59 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:00 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:01 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:02 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:03 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:04 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:05 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:06 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3216  HANDLE:440)
    NiIMyHostName: hostname = 'cgnlpt036'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 5 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 5
    NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 5 / socket 368
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
    Good Bye .....

    Hi,
    Thanks for the reply.
    dboraslib.dll is properly installed - I checked the registry and physical location of the file.
    The problem was : Environment variable "Path" not being set properly for the "oracle jre".
    Solution:
    After setting the path, the dispatcher started to run properly without any problems.
    Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
    FYI - We are using WIN2K with SP4 and oracle DB 9.2
    Regards,
    Sridhar

  • Error deploying the composite on soa_server1: ORABPEL-01005

    Hi,
    I have a simple composite application with a file adapter. I can deploy it on my local SOA Suite configuration (admin server + soa_server1 etc...). The composite application works fine.
    When I deploy the same composite application on a remote "production" server I get an error:
    Error message from server:
    There was an error deploying the composite on soa_server1: Deployment Failed: Error occurred during deployment of component: BPELProcess1 to service engine: implementation.bpel, for composite: ProjectReadBankFile: ORABPEL-01005
    Localhost and target remote soa versions are: 11.1.1.5.0. Jdeveloper is also 11.1.1.5.0
    ######## traces ##########
    Buildfile: /home/user/Oracle/Middleware/jdeveloper/bin/ant-sca-compile.xml
    scac:
    [scac] Validating composite "/home/user/jdeveloper/mywork/BankBilling/ProjectReadBankFile/composite.xml"
    [scac] Setting BPELC option 'classpath' to /home/user/Oracle/Middleware/jdeveloper/jdev/extensions/oracle.sca.modeler.jar:/home/user/Oracle/Middleware/jdeveloper/soa/modules/oracle.soa.fabric_11.1.1/fabric-runtime.jar:/home/user/Oracle/Middleware/jdeveloper/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/user/Oracle/Middleware/oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar:/home/user/Oracle/Middleware/jdeveloper/soa/modules/oracle.soa.bpel_11.1.1/orabpel.jar:/home/user/Oracle/Middleware/jdeveloper/soa/modules/oracle.soa.mediator_11.1.1/mediator_client.jar:/home/user/Oracle/Middleware/oracle_common/modules/oracle.mds_11.1.1/mdsrt.jar::/home/user/jdeveloper/mywork/BankBilling/ProjectReadBankFile/SCA-INF/classes
    [scac] Composed "BPELProcess1" in 87.0 milliseconds [nodes 63=2+61, 724.4 nodes/sec]
    [scac] Compiled "BPELProcess1" in 2.018 seconds
    [scac] Gathered 6 files in 0.3 milliseconds
    [scac] Packaged "BPELProcess1" in 11.2 milliseconds
    BUILD SUCCESSFUL
    Total time: 8 seconds
    ################ traces deployment ###########
    [02:25:08 PM] ---- Deployment started. ----
    [02:25:08 PM] Target platform is (Weblogic 10.3).
    [02:25:09 PM] Running dependency analysis...
    [02:25:09 PM] Building...
    [02:25:18 PM] Deploying profile...
    [02:25:18 PM] Wrote Archive Module to /home/user/jdeveloper/mywork/BankBilling/ProjectReadBankFile/deploy/sca_ProjectReadBankFile_rev1.0.jar
    [02:25:18 PM] Deploying sca_ProjectReadBankFile_rev1.0.jar to partition "default" on server soa_server1 [http://www.nsn-soa.com:8001]
    [02:25:18 PM] Processing sar=/home/user/jdeveloper/mywork/BankBilling/ProjectReadBankFile/deploy/sca_ProjectReadBankFile_rev1.0.jar
    [02:25:18 PM] Adding sar file - /home/user/jdeveloper/mywork/BankBilling/ProjectReadBankFile/deploy/sca_ProjectReadBankFile_rev1.0.jar
    [02:25:18 PM] Preparing to send HTTP request for deployment
    [02:25:18 PM] Creating HTTP connection to host:www.real-soa.com, port:8001
    [02:25:18 PM] Sending internal deployment descriptor
    [02:25:18 PM] Sending archive - sca_ProjectReadBankFile_rev1.0.jar
    [02:25:19 PM] Received HTTP response from the server, response code=500
    [02:25:19 PM] Error deploying archive sca_ProjectReadBankFile_rev1.0.jar to partition "default" on server soa_server1 [http://www.real-soa.com:8001]
    [02:25:19 PM] HTTP error code returned [500]
    [02:25:19 PM] Error message from server:
    There was an error deploying the composite on soa_server1: Deployment Failed: Error occurred during deployment of component: BPELProcess1 to service engine: implementation.bpel, for composite: ProjectReadBankFile: ORABPEL-01005
    Failed to compile bpel generated classes.
    failure to compile the generated BPEL classes for BPEL process "BPELProcess1" of composite "default/ProjectReadBankFile!1.0*soa_6d88d63a-00ca-4021-bacf-096f54a4f045"
    The class path setting is incorrect.
    Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
    What could be wrong?
    PS this is the first time I get this deployment error when deploying on the target remote server.
    Other composite applications could be deployed with success.
    Best regards,
    Yves
    [02:25:19 PM] Check server log for more details.
    [02:25:19 PM] Error deploying archive sca_ProjectReadBankFile_rev1.0.jar to partition "default" on server soa_server1 [http://www.real-soa.com:8001]
    [02:25:19 PM] #### Deployment incomplete. ####
    [02:25:19 PM] Error deploying archive file:/home/user/jdeveloper/mywork/BankBilling/ProjectReadBankFile/deploy/sca_ProjectReadBankFile_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    Edited by: user5184649 on Jan 9, 2012 8:17 AM

    Hi ,
    Thanks ... but I don't use embedded JAVA. I only use :
    a) a file adapter to read a CSV file posted in a directory of the weblogic server.
    b) the file location is the same as on the localhost and has the same permissions rights
    The BPEL process only parses the CSV file when the process is triggered.
    BR Yves
    Edited by: user5184649 on Jan 10, 2012 5:35 AM
    Edited by: user5184649 on Jan 10, 2012 5:43 AM

  • Deployejb : Oracle 8.1.6 : Errors compiling the communication stubs

    Hi,
    I was able to deploy EJB using JDeveloper 3.1 in the Oracle 8i (1.1.6) DB.However, when I try it manually, it is giving errors.
    I was able to use deployejb tool succesfully with Oracle 8.1.5 DB.Is there some problem with Oracle 8.1.6 DB?
    This is output, I am getting :
    Reading Deployment Descriptor...done
    Verifying Deployment Descriptor...done
    Gathering users...done
    Generating Comm Stubs.....................................done
    Compiling Stubs...Errors compiling the communication stubs
    C:\sandeep\JDeveloper3.0\class\TEMP\EJBPackage\_OracleEJBHomeImplBase.java:24: i
    llegal combination of modifiers: abstract and strictfp
    abstract public class _OracleEJBHomeImplBase extends org.omg.CORBA.portable.Skel
    eton implements EJBPackage.OracleEJBHome {
    ^
    C:\sandeep\JDeveloper3.0\class\TEMP\EJBPackage\_OracleEJBRemoteImplBase.java:24:
    illegal combination of modifiers: abstract and strictfp
    abstract public class _OracleEJBRemoteImplBase extends org.omg.CORBA.portable.Sk
    eleton implements EJBPackage.OracleEJBRemote {
    ^
    2 errors
    Is this a problem with the classpath/path settings?
    Please advise!!
    TIA
    Sandeep
    null

    Thanks,I got it
    -- Sandeep
    null

  • SOA Suite Business Rules: Error caching the Decision Services metadata

    hi ofm users
    im currentntly trying
    SOA Suite 11.1.1.1.0
    on Oracle XE
    on Windows XP Pro
    what im trying is a simple use case of business rule component,
    my service is getWorkStatusByDay, that i implement using
    business rules component using decision table.
    my rule model is (conceptually):
    Day{
         String id;
         String code;//mon,tue,wed,...,sat,sun
    WorkStatus{
         String id;
         String code;//holiday, work
    WorkStatus getWorkStatusByDay(Day):
    is rule service that decides WorkStatus code by Day code,
    eg:
    if Day.code=mon,tue,wed,...,fri then we got WorkStatus.code=work
    if Day.code=sat,sun then we got WorkStatus.code=holiday
    i've successfully created the composite project, using
    rule component, mediator, and exposed it as a webservice
    compiled and deployed ok.
    but when i try to run the service using soapUI WS tester,
    i'm getting error in the console, see stacktrace below.
    im able to reproduce the error by deploying the project
    to another computer with a same spec as above.
    So is there any solution to this ? how to fix this issue,
    as this is a very basic sample scenario.
    Any information will be appreciated,
    as im looking forward to evaluating Oracle Business for a client project :)
    [2010-08-11T14:07:14.593+07:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IdVyLm30nnWFLzmJOA1CO^J500000D,0] [WEBSERVICE_PORT.name: getWorkStatusByDayPT_pt] [APP: soa-infra] [composite_name: TestRule] [component_name: mapWorkStatusByDay] [component_instance_id: c984b23f-0370-478b-99e1-83b651e2e35c] [J2EE_MODULE.name: fabric] [WEBSERVICE.name: getWorkStatusByDay] [J2EE_APP.name: soa-infra] [composite_instance_id: 40001] <.> Error caching the Decision Services metadata.[[
    Error caching the decision services metadata for path default/TestRule!1.0*91126208-425e-4d35-bca3-d2585ec941ea/mapWorkStatusByDay.
    Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
    ORABPEL-36109
    Error caching the Decision Services metadata.
    Error caching the decision services metadata for path default/TestRule!1.0*91126208-425e-4d35-bca3-d2585ec941ea/mapWorkStatusByDay.
    Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:359)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:1164)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:570)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.rules.rl.exceptions.ParseException: encountered 'rule' when expecting one of:
    <XML_IDENTIFIER> ...<IDENTIFIER> ...
    at line 10 column 49 in main
         at oracle.rules.rl.exceptions.ExceptionFactory.createParseException(ExceptionFactory.java:577)
         at oracle.rules.rl.analyze.RulesetParser.generateParseException(RulesetParser.java:25)
         at oracle.rules.rl.parse.RLParser.jj_consume_token(RLParser.java:5430)
         at oracle.rules.rl.parse.RLParser.Symbol(RLParser.java:697)
         at oracle.rules.rl.parse.RLParser.Qname(RLParser.java:672)
         at oracle.rules.rl.parse.RLParser.ClassName(RLParser.java:795)
         at oracle.rules.rl.parse.RLParser.Type(RLParser.java:729)
         at oracle.rules.rl.parse.RLParser.Parameter(RLParser.java:886)
         at oracle.rules.rl.parse.RLParser.Parameters(RLParser.java:860)
         at oracle.rules.rl.parse.RLParser.Function(RLParser.java:1005)
    [2010-08-11T14:07:14.718+07:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IdVyLm30nnWFLzmJOA1CO^J500000D,0] [WEBSERVICE_PORT.name: getWorkStatusByDayPT_pt] [APP: soa-infra] [composite_name: TestRule] [component_name: mapWorkStatusByDay] [component_instance_id: c984b23f-0370-478b-99e1-83b651e2e35c] [J2EE_MODULE.name: fabric] [WEBSERVICE.name: getWorkStatusByDay] [J2EE_APP.name: soa-infra] [composite_instance_id: 40001] <.> [[
    oracle.fabric.common.BusinessFaultException
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:359)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:1164)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:570)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    -----

    hi ofm users
    im currentntly trying
    SOA Suite 11.1.1.1.0
    on Oracle XE
    on Windows XP Pro
    what im trying is a simple use case of business rule component,
    my service is getWorkStatusByDay, that i implement using
    business rules component using decision table.
    my rule model is (conceptually):
    Day{
         String id;
         String code;//mon,tue,wed,...,sat,sun
    WorkStatus{
         String id;
         String code;//holiday, work
    WorkStatus getWorkStatusByDay(Day):
    is rule service that decides WorkStatus code by Day code,
    eg:
    if Day.code=mon,tue,wed,...,fri then we got WorkStatus.code=work
    if Day.code=sat,sun then we got WorkStatus.code=holiday
    i've successfully created the composite project, using
    rule component, mediator, and exposed it as a webservice
    compiled and deployed ok.
    but when i try to run the service using soapUI WS tester,
    i'm getting error in the console, see stacktrace below.
    im able to reproduce the error by deploying the project
    to another computer with a same spec as above.
    So is there any solution to this ? how to fix this issue,
    as this is a very basic sample scenario.
    Any information will be appreciated,
    as im looking forward to evaluating Oracle Business for a client project :)
    [2010-08-11T14:07:14.593+07:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IdVyLm30nnWFLzmJOA1CO^J500000D,0] [WEBSERVICE_PORT.name: getWorkStatusByDayPT_pt] [APP: soa-infra] [composite_name: TestRule] [component_name: mapWorkStatusByDay] [component_instance_id: c984b23f-0370-478b-99e1-83b651e2e35c] [J2EE_MODULE.name: fabric] [WEBSERVICE.name: getWorkStatusByDay] [J2EE_APP.name: soa-infra] [composite_instance_id: 40001] <.> Error caching the Decision Services metadata.[[
    Error caching the decision services metadata for path default/TestRule!1.0*91126208-425e-4d35-bca3-d2585ec941ea/mapWorkStatusByDay.
    Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
    ORABPEL-36109
    Error caching the Decision Services metadata.
    Error caching the decision services metadata for path default/TestRule!1.0*91126208-425e-4d35-bca3-d2585ec941ea/mapWorkStatusByDay.
    Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:359)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:1164)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:570)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.rules.rl.exceptions.ParseException: encountered 'rule' when expecting one of:
    <XML_IDENTIFIER> ...<IDENTIFIER> ...
    at line 10 column 49 in main
         at oracle.rules.rl.exceptions.ExceptionFactory.createParseException(ExceptionFactory.java:577)
         at oracle.rules.rl.analyze.RulesetParser.generateParseException(RulesetParser.java:25)
         at oracle.rules.rl.parse.RLParser.jj_consume_token(RLParser.java:5430)
         at oracle.rules.rl.parse.RLParser.Symbol(RLParser.java:697)
         at oracle.rules.rl.parse.RLParser.Qname(RLParser.java:672)
         at oracle.rules.rl.parse.RLParser.ClassName(RLParser.java:795)
         at oracle.rules.rl.parse.RLParser.Type(RLParser.java:729)
         at oracle.rules.rl.parse.RLParser.Parameter(RLParser.java:886)
         at oracle.rules.rl.parse.RLParser.Parameters(RLParser.java:860)
         at oracle.rules.rl.parse.RLParser.Function(RLParser.java:1005)
    [2010-08-11T14:07:14.718+07:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IdVyLm30nnWFLzmJOA1CO^J500000D,0] [WEBSERVICE_PORT.name: getWorkStatusByDayPT_pt] [APP: soa-infra] [composite_name: TestRule] [component_name: mapWorkStatusByDay] [component_instance_id: c984b23f-0370-478b-99e1-83b651e2e35c] [J2EE_MODULE.name: fabric] [WEBSERVICE.name: getWorkStatusByDay] [J2EE_APP.name: soa-infra] [composite_instance_id: 40001] <.> [[
    oracle.fabric.common.BusinessFaultException
         at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
         at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:359)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:1164)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:570)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    -----

  • Bad Character Errors after Unicode implementation???

    Hi,
    Uncode is implemented in BW Development system in my project. While prforming unit testing after implementing the unicode, we faced an issue of bad character in Sort field while loading data for 0VENDOR master data. Till now we used to correct this kind of error in PSA level and reload the data from PSA to Data target in production. I hope, this kind of error should be resolved after implementation of Unicode Conversion project. But, even after implementation of Unicode, we faced this problem.
    Can you please confirm me my understanding is correct - after implementation of Unicode, bad character errors will disappear?
    Best Regards,
    Venkata.

    HI again,
    I would like to correct my statement above. I did encounter an error during the import phase (ie. import abap) where it stopped at SAPDFACT.
    I changed the  "err" to "ok" in the tsk file to continue cuz I couldnt find any other alternative working. On browsing other forums I have come to conclude that is the problem for sure.
    Can you please help me figure how to resolve the issue please .. ??
    thank you!

  • Error on the RDBMS BEA EIS adapter in WLI 8.1

    Hi,
    I'm using the RDBMS WebLogic adapter for RDBMS EIS and I can create 'application
    views' which perform correct operations on the EIS such as "create new entry"
    in the database, "delete entries" (using SELECT and DELETE sql commands ) but
    I permanently get the error listed below when I use UPDATE queries in the Service
    I implement on the RDBMS adapter.
    Has anyone seen this before ? Sorry if the question was answered before but I
    don't find any error like this one in any BEA newsgroup.
    Best regards
    Yves
    java.rmi.ServerError: A error occurred the server; nested exception is:
         weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ cannot unmarshaling
    throwable ] - with nested exception:
    [java.io.NotSerializableException: com.metamata.parse.Token]
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:201)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
         at __v1_AppViewOpenNapServer.AppViewOpenNapServer_gp978f_EOImpl_811_WLStub.invokeService(Unknown
    Source)
         at com.bea.wlai.client.ApplicationView.invokeService(ApplicationView.java:842)
         at jsp_servlet.__testrslt._jspService(__testrslt.java:371)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:594)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:409)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:155)
         at jsp_servlet.__display._jspService(__display.java:659)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ cannot
    unmarshaling throwable ] - with nested exception:
    [java.io.NotSerializableException: com.metamata.parse.Token]
         at weblogic.rmi.internal.ServerRequest.unmarshalThrowable(ServerRequest.java:335)
         at weblogic.rmi.internal.ServerRequest.getThrowable(ServerRequest.java:59)
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:184)
         ... 24 more

    Hi Lakshman,
    I use the standard PointBase server provided with the BEA 8.1 platform.
    Here is an attachment which details all the tests and the error reported by the
    WLI8.1.
    The different SQL requests are detailled as well as the XML generated files.
    Thanks for your help.
    Best regards,
    Yves
    "Lakshman Varma" <[email protected]> wrote:
    >
    Hi Yves,
    This is Lakshman from BEA Adapter Support Team,now i am trying to simulate
    the
    problem which you were getting.
    Can you provide me some more information that will help me to resolve
    this problem.
    a)Which Data base you were using(version also)?
    b)The update statement which was throwing exception
    c)RDBMS Adapter log file which is located in your domain(latest logfile
    with the
    exception you were getting).
    and anything you feel that may help me to resolve this problem.
    Thanks And Regards
    Lakshman Varma
    BEA Adapter Support Engineer
    BEA Syatems
    "Yves Leaute" <[email protected]> wrote:
    Hi,
    I'm using the RDBMS WebLogic adapter for RDBMS EIS and I can create'application
    views' which perform correct operations on the EIS such as "create new
    entry"
    in the database, "delete entries" (using SELECT and DELETE sql commands
    ) but
    I permanently get the error listed below when I use UPDATE queries in
    the Service
    I implement on the RDBMS adapter.
    Has anyone seen this before ? Sorry if the question was answered before
    but I
    don't find any error like this one in any BEA newsgroup.
    Best regards
    Yves
    java.rmi.ServerError: A error occurred the server; nested exceptionis:
         weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ cannot
    unmarshaling
    throwable ] - with nested exception:
    [java.io.NotSerializableException: com.metamata.parse.Token]
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:201)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
         at __v1_AppViewOpenNapServer.AppViewOpenNapServer_gp978f_EOImpl_811_WLStub.invokeService(Unknown
    Source)
         at com.bea.wlai.client.ApplicationView.invokeService(ApplicationView.java:842)
         at jsp_servlet.__testrslt._jspService(__testrslt.java:371)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:594)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:409)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:155)
         at jsp_servlet.__display._jspService(__display.java:659)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[
    cannot
    unmarshaling throwable ] - with nested exception:
    [java.io.NotSerializableException: com.metamata.parse.Token]
         at weblogic.rmi.internal.ServerRequest.unmarshalThrowable(ServerRequest.java:335)
         at weblogic.rmi.internal.ServerRequest.getThrowable(ServerRequest.java:59)
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:184)
         ... 24 more
    [bea_report.txt]

  • Errors with the global conversion rule for the field 0SOURSYSTEM.

    Hello Gurus,
        We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
    Error in global conversion rule for InfoObject 0SOURSYSTEM
    Message no. RSAR263
    Diagnosis
    Errors with the global conversion rule for the field 0SOURSYSTEM.
    System Response
    The function module delivers the following error message:
    Field "" is unknown. It is neither in one of t
    Procedure
    Check the definition of the global conversion rule for an InfoObject
    What does this error mean? We are using BI 7.
    Thanks
    RKR

    I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
    I set data for CRM system and then tried to activate.. but still I'm getting same error.
    I;m getting this warning too...
    InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
    Message no. RSDODSO123
    Diagnosis
    Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
    System Response
    The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
    Does this matter???
    Thanks
    RKR
    Message was edited by:
            RKR M

Maybe you are looking for

  • Videos black and white

    Hi there. I have a iPod 80GB, and the original iPod AV cables with docking station. I have connected the cables to my home theatre system. Music fine, and I have a cable running from video out on dvd to tv (plasma). Get picture, but in black and whit

  • Very Urgent - ABAP Logic

    Hi Gurus, Dear All, this is my requirement I have a customized screen, all data is storing in zxyz table, in this table key fields are Screen Number and Personnal number. In the same screen last 5 fields will store in different zabc table, these fiel

  • Can't burn any CD/DVD ?

    Hello, this is my BIG problem : i have a P965 Neo motherboard + Dual Core E6600 + 2x 1GbDDR2 800 Corsair + 1x Seagate SATA II 320Gb + 1x ASUS DVDRW. I have BIOS v1.6, and Jmicron v17.08 installed. In Bios the IDE/RAID control is set to IDE. The IDE b

  • Blob's w/dynamic SQL

    Has anyone had any success using dynamic SQL to perform the inserts and updates with binary data? -jeff

  • certification experts Please Advice Which certification i should do ?

    hi everyone, first, thanks for being here to replay to me ;-) am planing to do oracle 9i/10g OCP DBA, i also have good experience on forms developer, PL/SQL and database administration also ;-) i have these options : 1- Oracle Application Server 10g