Error in the language of the taxes description (form)

Hi
Could anyone guide if for teh below aspect.
If there is an issue with respect to "Error in the language of the taxes description (form)"
where do you think the possible error would be . Please kindly guide be.
Thanks & Regards
Sujatha

Hi,
What's the error message number and when do you get it?
Regards,
Eli

Similar Messages

'Error at the end of form processing' - Adobeforms

Hi All,
I am facing an issue while opening travel request form in PDF with an error showing as 'Error at the end of form processing'.
I checked all configurations from R/3 and everything seems to be fine.
Appreciate for your valuable inputs for solving the issue.
Thanks & Regards,
Srujana.

Hi,
You provide some more details for the problem. It seems FP_JOB_CLOSE is returning some error. Check that once.
Thanks,
Nitin

ORA-012203 error ----after the installation of forms 10g

I have forms6i in C: and installed forms 10g in other drive....but now when i am trying to connnect forms6i application i get this error ORA-012203 Unable to connect to destination
i have even seen this thread but it did not help much
Re: Forms 6i - ora-012203 tns:unable to connect to the destination

Once you locate all of your TNSNAMES.ora files, identify one as your main file. Make sure all of your connections are located in this file and are correct.
Then go to every other TNSNAMES.ora file and replace everything in the file with ifile=<directory_path/filename>
For instance, mine is:
ifile=C:\DevSuiteHome_1\NETWORK\ADMIN\tnsnames.ora
Now you only have to maintain one file for your multiple tools
Edited by: ChrisBaker on Jan 4, 2010 5:59 AM
I used this to check whether this solution works or not......after i tried the abv sol ... i dont ger ora -012203 but i get ora 012154 -TNS:could not resolve the connect identifier specified... i have checked my tnsnames.ora n everything is right in it

Error running the report from Form

Hi,
I am try to run the report from the form by using these code of line
DECLARE
RPT_OBJECT REPORT_OBJECT;
RPT_RUN VARCHAR2(100);
BEGIN
RPT_OBJECT := FIND_REPORT_OBJECT('REPORT7');
SET_REPORT_OBJECT_PROPERTY(RPT_OBJECT, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RPT_OBJECT, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(RPT_OBJECT, REPORT_OTHER,'P_CITYCODE'||:CITYCODE||'PARAMFORM = YES');
RPT_RUN := RUN_REPORT_OBJECT(RPT_OBJECT);
END;
but i m not using any Form server and Report Server i m completly using Oracle9iDS
It gives the error rep-0110 file not found and
rep-1070 error while opening and saving the file
please give me the solution
Shehzad

Shehzad,
this means that Reports Server cannot access the Reports module. You can test this assumption by copying your Reports module into <Oracle Home>\reports\samples\demo. The demo directory is out of the box accessible fro Reports.
If this allows you to run the Report, then all you need to do is to specify the Reports_Path to include the reports modules.
btw.: An other reason can be that your Reports contains uncompiled PLSQL, so you may want to check this too.
Frank

Error in Assiging the Tax Group - FF716

I have created a new tax code for GL assignments for GST purposes on our ledger but when I try and post a GL Ledger entry using the tax code I receive the following error message "Error Assigning the tax group", Msg # FF716.
This tax code is for sales entries at zero percent for GL accounts where an output tax code is required. I have not been able to find an appropriate SAP note on the SAP Support Portal for this error number or a clue as to the linkages between the tax code and the assigned tax group.
This is the first tax code I have configured and have copied the config from existing tax codes that are currently functioning correctly.
Can anyone please help.

Hi,
Please apply the correction of note 1292730 and test the outcome.
I believe that the error FF716 is called due to a missing customizing or a customizing that is not correctly in place. Please can you check your tax customizing for your company code very carefully and take the LONG TEXT of the ERROR message into account going forward in resolving this issue.
For example a tax procedure is assigned to a country which does not use Jurisdiction codes, but in TCode OBCL a jurisdiction
is entered for the company code. Bottom line is, if no jurisdiction codes are used in the procedure then no assignment should be shown in OBCL.
I hope this helps.
Regards
Ravinagh Boni

The tax code entered is not defined in the country for this company code

HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
    The tax code entered is not defined in the country for this
    company code.
System Response
Procedure
    Check and, if necessary, correct the entry.
Procedure for System Administration
    If it is not an input error, check and possibly change the
    system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure
        is assigned to the relevant country. the Procedure
        field is in the detail screen.
    2. Create a new tax code if required.
Thanks & Regards
Aarman

You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA

The tax amount must not be greater than the tax base

Hi Experts,
User is trying to "Relase to Account" in t-code VF01 he is getting an error message The tax amount must not be greater than the tax base.
During Debuging i found the error is raised in Function module RV_ACCOUNTING_DOCUMENT_CREATE
Message raised is
Message Class : FF
Message number: 747
Mesage "The tax amount must not be greater than the tax base"
Request to through some lights on this issue.
Reagrds
Sree

Hi,
did you check SAPNET notes with "VF01" and the message class/number as search terms. There are some notes dealing with this case eg 872449, and 184985.
Best regards, Christian

PU19 Tax Reporter - Form 941 spool missing after 4.6c to ECC 6.0 upgrade

Hi Experts,
We recently underwent a technical upgrade from 4.6c to ECC 6.0.When we use PU19 tax reporter Form 941 as it is a federal tax return form in US .When i check in job spool is not coming.Please let me know if some note is release for spool and printout put.
Looking for your prompt response.
Thanks & Regards,
Ankur

Hello Ankur,
You need to get the Adobe Document Server running if you are going to
print PDF files from Tax Reporter. Please have you basis group check
that the Adobe Document Server is working correctly.
Please use transaction SFP to test the Adobe Document Server using the
Tax Reporter forms.
From Adobe Document Services Implementation Guide;
Installation Preparation
Install a SAP Web AS 6.40 J2EE Engine or higher
A SAP J2EE Engine on Windows is the basis for the Adobe Document
Services.
Therefore, before you begin with the installation, make sure that one of
the following prerequisites are met:
SAP Web AS J2EE engine on Windows is Installed
The following installation types are supported:
- SAP Web AS 6.40 ABAP + J2EE system (J2EE Add-In) or higher
- SAP Web AS 6.40 J2EE system or higher
For both variants the following installation options are supported:
- Central System (Central Instance and Database Instance on one host)
- Distributed System (Central Instance and Database Instance on separate
hosts)
- Dialog Instances
For information on Adobe and the ADS I would suggest looking at the
online documentation.
http://service.sap.com -> SAP Help Portal -> Search on ADOBE and you
will get the help information on configuration.
Also review SAP Note No. 944221
Regards,
Manny

PU19 Tax Reporter - Form 941spool missing after 4.6c to ECC 6.0 upgrade

Hi Experts,
We recently underwent a technical upgrade from 4.6c to ECC 6.0.When we use PU19 tax reporter Form 941 as it is a federal tax return form in US .When i check in job spool is not coming.Please let me know if some note is release for spool and printout put.
Looking for your prompt response.
Thanks & Regards,
Ankur

Hello Ankur,
You need to get the Adobe Document Server running if you are going to
print PDF files from Tax Reporter. Please have you basis group check
that the Adobe Document Server is working correctly.
Please use transaction SFP to test the Adobe Document Server using the
Tax Reporter forms.
From Adobe Document Services Implementation Guide;
Installation Preparation
Install a SAP Web AS 6.40 J2EE Engine or higher
A SAP J2EE Engine on Windows is the basis for the Adobe Document
Services.
Therefore, before you begin with the installation, make sure that one of
the following prerequisites are met:
SAP Web AS J2EE engine on Windows is Installed
The following installation types are supported:
- SAP Web AS 6.40 ABAP + J2EE system (J2EE Add-In) or higher
- SAP Web AS 6.40 J2EE system or higher
For both variants the following installation options are supported:
- Central System (Central Instance and Database Instance on one host)
- Distributed System (Central Instance and Database Instance on separate
hosts)
- Dialog Instances
For information on Adobe and the ADS I would suggest looking at the
online documentation.
http://service.sap.com -> SAP Help Portal -> Search on ADOBE and you
will get the help information on configuration.
Also review SAP Note No. 944221
Regards,
Manny

Forms Personalization issue - Default GRE on Tax Balances form

Hi -
Since we have only 1 GRE in our HRMS system, I am trying to populate ( basically default) the GRE name on the GRE field of the Tax Balances form.
I chose when new form instance and in the action i am setting the value of field TAXSEL.GRE = 'Name of GRE'
So, when I open the form, it looks like it is successfully able to populate the field with the name of the GRE, but then it opens up the find person window where you need to enter the name of the employee whose tax baalnce you want to view. When I enter the name of the employee, the GRE field automatically dis-appears. So it defeats the purpose of the personalization.
Has anyone tried this kind of personalization ? or any insights will be greatly appreciated.
Regards
Tushar

Dear Tushar,
try the following:
1 - Help --> Diagnostic --> Custom Code --> Show Custom Events.
2 - repeat the failing scenario
3 - see which event on wich item is making GRE field dis-appearing
4 - set your custom code on the event after the one identified in 3
hope this help
Giuseppe

UDF in Tax Code Form

Hi Everyone ,
I want to add a UDF in the Tax Code Form .
Table is OSTC .
But Unable to do the same.
Under Which Category i have to go for this.
Thanks
Ashish Ranjan

Hi Ashish........
In SAP under several tables you can not create UDF and OSTC is one of them.....
So unfortunately you can not create......
Regards,
Rahul

HT3702 Where do I submit a Tax Exempt form?

Where do I submit a Tax Exempt form for purchases I have made?

Complete and fax the tax exempt form documentation to 866-758--7712 with reference to your ordernumber

Error while trying to change the Column description in Table Control

Hi,
I have created a table control using the wizard in Module Pool.
When i try to change the column description of the table control or adjust any other element which is already available on the screen and not in table control. It gives me an error
Unable to transfer data. End Program?
Any help would be appreciated.
Thanks
Sarves S V K

Hi.,
Check these [Table Control Change Column Description|Add new columns in table control in custom screen program;
and [Add Columns in Table Control|Re: Table control columns]
else delete and create Table control Again..!!
hope this helps u.,
Thanks & Regards,
Kiran

Error Message FF747 -The tax amount must not be greater than the tax base

Hello,
We are attempting to post an import vendor invoice through transaction FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
We tried putting a very high percentage in the tax code also but it didn't help
We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
Best Regards
Amit Kulkarni

Hello
This may be a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like this to be posted along with the expense item

Error in SMW01:Allocation of the tax for country RO, sequence 1, value 0 no

Hi,
when materials are replicated we found a queue existing in SMQ1 and SMQ2.
When i have checked in SMW01 for the Log it showed me the error "Allocation of the tax for country RO, sequence 1, value 0 not possible"
Then i clicked on Show BDoc Message Ext.data It showed around 20 materials.I ahve checked the material in R3 there is no sales view for this material type itself.
i tried to replicate one of those material manually then it is replicated.
Can anyone guide me why system showed "Allocation of the tax for country RO, sequence 1, value 0 not possible" this message even there is no problem with material?
Is there any Trasaction to find the exact material which is creating problem?
kindly suggest me few points on this how to solve this kind of error in future
regards
subbu

Hello Subbu,
There is a txn:CRM_TAXCUST_VALIDATE which would help you to figure out any issues with Tax customizing.
Please exceute this txn and you would come to know the list of erroneous tax customizing.
Also,
in CRM table CRMC_TAX_MAP for country RO,check whether any records have been
maintained for Access Sequence (i.e LFDNR) 1.
                                                                                Please check the following customization in txn:SPRO.
CRM->Basic Functions->Taxes->Basic Settings->Tax Types and Tax Groups->
Assign Tax Groups to SAP ECC Tax Classifications (Product).
For example: If there are entries for Country RO for sequence 1 and
value 0 there must also be correpsonding entries in R/3 table MLAN and
vice versa.
Also,I kindly advice you to go through the documentaion of
"Assign Tax Groups to SAP ECC Tax Classifications (Product)" in CRM,
which is present in the above mentioned SPRO navigation.
Also,
*If you are not sure about the sequence of the taxes, you can check it
in SAP ECC, in Customizing for Sales and Distribution (SD), by choosing
Basic Functions -> Taxes -> Define Tax Determination Rules.
Hope this helps!
Best Regards,
Shanthala Kudva.

Error in the language of the taxes description (form)

Similar Messages

Maybe you are looking for