Error in uploading TIFF imge
Working on SAP 4.7. Trying to upload TIFF image using program RSTXLDMC. The tiff image is made using Microsoft Photo Editor 3.0.2.3
While uploading its gives Error message that Image is not Baseline 6.0 TIFF format.
what could be the reason. Kindly help.
The same image in BMP format can be uploaded using SE78.
thanks
anu
Dear Anupma,
It seems as if you are trying to upload graphics in you SAP Script. Try the following process -
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
Hope it will help you. If it solves your query then kindly reward the points and close the thread.
Regards.
Naveen
Similar Messages
-
Error while uploading tiff file using report "RSTXLDMC"
Hi Experts,
I am trying to upload .tif file into SAP usinf report "RSTXLDMC".
Getting below error.
Uploading TIFF Files to SAPscript Texts
Load File
c:\file.tif
The file contains 134,412 bytes
This is a TIFF file with MOTOROLA byte order
First IFD offset: 8
Reading IFD from offset 8 Number of Tags 13
ImageWidth: 5,120
ImageLength: 6,590
Compression: 2
Photometric Interpretation: 0
Number of StripOffsets: 5
RowsPerStrip: 1,636
Number of StripByteCounts: 5
XResolution: 600 / 1
YResolution: 600 / 1
ResolutionUnit: 2
This is a baseline TIFF 6.0 BILEVEL file
TIFF upload not possible, compression type 2 not supported
How to solve this ????
Please help.
Regards,
SVSDear Vijay,
I have one tiff 6.0 image which i am passing to program "RSTXLDMC".
I have not done any conversion or changes in the file.
Regards,
Sagar Sontakke -
ERROR WHILE UPLOADING TIFF FILE.
Dear Sir/Madam,
While i am trying to upload tiff file i got this error , i cannot understand where i made mistake , please guide me to solve this problem.
Load File
C:\Documents and Settings\dastagiri\Desktop\PARU.tiff
The file contains 2,798 bytes
This is a TIFF file with INTEL byte order
First IFD offset: 2,612
Reading IFD from offset 2,612 Number of Tags 15
ImageWidth: 176
ImageLength: 148
BitsPerSample levels: 3
BitsPerSample - level 1: 8
BitsPerSample - level 2: 8
BitsPerSample - level 3: 8
Compression: 5
Photometric Interpretation: 2
Number of StripOffsets: 7
SamplesPerPixel: 3
RowsPerStrip: 23
Number of StripByteCounts: 7
XResolution: 96 / 1
YResolution: 96 / 1
ResolutionUnit: 2
TIFF format error: No baseline TIFF 6.0 file
Thanks in Advance,
D@st@giri.Dear Vijay,
I have one tiff 6.0 image which i am passing to program "RSTXLDMC".
I have not done any conversion or changes in the file.
Regards,
Sagar Sontakke -
Error when uploading a tif file
Hi All,
I want to upload a file in tif format.i am having the file with tiff format.
when i upload through se78 /import and given the file name as c:\CCNA- Puerto Rico Region Logo.
But it is showing the following error.
Uploading TIFF Files to SAPscript Texts 1
Load File
c:\CCNA- Puerto Rico Region Logo
The file contains 8,678,690 bytes
This is a TIFF file with INTEL byte order
First IFD offset: 8,672,788
Reading IFD from offset 8,672,788 Number of Tags 22
ImageWidth: 2,226
ImageLength: 910
Error: BitsPerSample tag has length <> 1 or 3
Compression: 1
Photometric Interpretation: 5
Number of StripOffsets: 1
SamplesPerPixel: 4
RowsPerStrip: 910
Number of StripByteCounts: 1
XResolution: 5,000,000 / 10,000
YResolution: 5,000,000 / 10,000
ResolutionUnit: 2
TIFF format error: No baseline TIFF 6.0 file
Appreciated ur valuable suggestions.
Thanks,
AravindaHi,
Up loading tiff fife first activate rstxldmc program .
excute the program give ur logo name.
In se71 u can include that object , id, macrc or something (these are comes after excute the program give ur logo name) -
I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?
Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.
-
TIFF format error: No baseline TIFF 6.0 file
hi gurus, i need your help with uploading my logo which is in Tiff format into the system as a graphic element in . via program
RSTXLDMC. i created the Tiff using paint . Os windows 7
ploading TIFF Files to SAPscript Texts 1
oad File
c:\pcl logo.tif
The file contains 14.432 bytes
his is a TIFF file with INTEL byte order
First IFD offset: 14.170
Reading IFD from offset 14.170 Number of Tags 16
ImageWidth: 131
ImageLength: 106
error: BitsPerSample tag has length <> 1 or 3
Compression: 5
Photometric Interpretation: 2
Number of StripOffsets: 5
SamplesPerPixel: 4
RowsPerStrip: 23
Number of StripByteCounts: 5
XResolution: 95.987 / 1.000
YResolution: 95.987 / 1.000
ResolutionUnit: 2
TIFF format error: No baseline TIFF 6.0 fileThe website you mentioned ie 'www.zamzar.com' can be used to convert the tiff file into other format's.
So can you tell me how to use the tiff file with out getting this error. Please help me out with this.
The error apperaring is:
Uploading TIFF Files to SAPscript Texts 1
Load File
c:\RA362S0900
The file contains 192,136 bytes
This is a TIFF file with INTEL byte order
First IFD offset: 191,410
Reading IFD from offset 191,410 Number of Tags 60
ImageWidth: 288
ImageLength: 189
BitsPerSample levels: 3
BitsPerSample - level 1: 8
BitsPerSample - level 2: 8
BitsPerSample - level 3: 8
Compression: 5
Photometric Interpretation: 2
Number of StripOffsets: 14
SamplesPerPixel: 3
RowsPerStrip: 14
Number of StripByteCounts: 14
XResolution: 96 / 1
YResolution: 96 / 1
ResolutionUnit: 2
TIFF format error: No baseline TIFF 6.0 file -
UPoad lgoo using RSTXLMDC ERROR showing TIFF format error: No baseline TIFF
Hi
I am geeting the below problem while uploading a tif format file using RSTXLDMC
Load File
h:\prim.tif
The file contains 13.930 bytes
This is a TIFF file with INTEL byte order
First IFD offset: 13.744
Reading IFD from offset 13.744 Number of Tags 15
ImageWidth: 559
ImageLength: 279
BitsPerSample levels: 1
BitsPerSample - level 1: 8
BitsPerSample - level 2: 0
BitsPerSample - level 3: 0
Compression: 5
Photometric Interpretation: 3
Number of StripOffsets: 14
SamplesPerPixel: 1
RowsPerStrip: 21
Number of StripByteCounts: 14
XResolution: 96 /
YResolution: 96 /
ResolutionUnit: 2
ColorMap size: 256
TIFF format error: No baseline TIFF 6.0 file
and I am not expecting the below code
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo windowHello,
The error message usually means that you try to upload a graphic with a
TIFF format, which is not supported. Please check the compression type
of the TIFF file with your graphic program. The SAP supports
uncompressed TIFF files and Packbits compressed TIFF files.
Read SAP note: 39031 tells about baseline.
Not every TIFF dataset can be uploaded, there are some preconditions.
Regards,
David -
Hi
I am trying to upload a new logo to the system and when i ran the program RSTXLDMC i got the following error and the logo was not uploaded in the system.
Tif format error - No baseline TIFF 6.0 format .
I am in ECC 6 system .could some one explain the errror and what other options i have to load the logo.
Thanks
AnjaliHi
I am seeing the similar post in SDN and some replies state the following.
Often this error occurs because the TIFF file you have has been saved with some form of compression. You need to open in a picture edit program and save as TIFF making sure options are set so there is no compression.
or check this link
Uploading TIFF files to SAP script Texts
Thanks
Viquar Iqbal -
Hi,
While uploading a tiff image using the program RSTXLDMC, I am getting the error
"TIFF format error: No baseline TIFF 6.0 file". Could anyone help me in solving this? I also tried using SE78. Iam getting a error there also.
Regards,
Jeyananthcheck below thread if it can help
Re: Images in smart forms
Regards,
Atish -
Issue while uploading .TIFF file into Standard text using RSTXLDMC
Hi All,
We are facing issues while uploading .TIFF file into standard text through program RSTXLDMC.
Getting the following error.
TIFF format error: No baseline TIFF 6.0 file.
The image is a colored one.
Please provide me solution if anyone has worked in this area.
Thanks in Advance,
Anand Raj Kuruba.Hi,
Often this error occurs because the TIFF file you have has been saved with some form of compression. You need to open in a picture edit program and save as TIFF making sure options are set so there is no compression.
Andrew -
Error while uploading Template
Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING Cp1252
Language Section* EN-US
Catalog Section Supplier* Title
FEDERAL INDUSTRIES Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PMHi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH -
Error while uploading BITMAP image in SAP through SE78.
Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav. -
Error while uploading a file using ke13 transactoin
Hi..
We have the following error when uploading a project plan by cost element excel upload using KE13 transaction...
There is a z program that calls this ke13 program while uploading. The excel file is split into x files and uploaded..
THe error is: Quantity Unit HR cannot be converted to & and error occured when generating data for planning processor...
Any idea if someone face similar situation..
Any clue would help us..
Thanks,
Kanthi.Hi,
Covert quantity to char and upload the data.
Regards
Amole -
Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
TarunHi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj. -
Error while uploading Transport request
Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
DeepakHi,
Check the versions of the two sap systems you are downloading and uploading the transport requests
Maybe you are looking for
-
Not all is there as before with software and all - please h
So I redid my computer meaning that I am in the process of reinstalling everythign from the OS down. Previously, with Mediasource for my Audigy 2 Platinum and my Muvo N200, I had all kinds of things that install and were helpful. Heck, I can not even
-
I have to upload a form in xml format. The file is in pdf format. I am using adobe reader 11. Please tell me how to export to xml format. There is no option for xml.
-
I've been asked to check if HASH JOIN is more suitable than NESTED LOOP(which CBO chose by default) for the following query. SELECT CM_DETAILS.TASK_ID FROM GEN_TYPE, CM_DETAILS WHERE ( ( ( ( ( CM_DETAILS.STAT_CODE < 8 ) AND ( GEN_TYPE.TASK_ID = CM_DE
-
Java Reports. Shrink the font size of the texfield.
Hello, I am working with Jasper Reports. I want User Comments to come it to report. Problem is if the Comments are bigger then it take more vertical space. But I want that its font size should reduce to fit into that area. I hope you understand Pleas
-
Guide for Customizing the Production Dimension
We are in the process of implementing Procure and spend for E-Business and We have already implemented SC and OM for JDE & Universal adapters. As part of our current project, We may have to customize the Product Dimension to use/add more flex fields.