Error in uploading transaction data

hai,
when i am uploading transaction data iam geting these error
"Request to transfer a file to the server is failed [error]: the request failed with http status 400: bad request"
can any one resolve this
thanks,
Rajesh

Hi,
If you are extracting data from BW infocbe then please check in ST22 or SLG1 for more detailed log about the issue.
hope it help...
regards,
Raju

Similar Messages

Upload transaction data for transactions like KSU2/KSU5,KB31N

We are trying to upload transaction data for transactions like KSU2/KSU5,KB31N etc using batch data processing within LSMW. We are facing couple of problems as mentioned: 
We have to upload data, which has a single header record with 200-300 line items record. How to define target structures to represent header & line items. Currently we are able to upload header data with 1-2 line items depending upon the recording. The present recording gives us option to load 1 line item per document. 
Can excel be used instead of text file for uploading data in LSMW? 
During processing of transaction, User clicks on button and checks a value. Based on this value the future course of action is determined. How can we do the BDC recording or do customization (Write a custom code) 
If errors occur during upload of data, will the processing stop at that line item or will it ignore the error record and continue processing of the remaining data. 
How can we write custom code to modify the data during BDC session and not before session? 
Immediate pointers to this would be very useful. Let me know if more information is required. 
 
Thanks, 
Mehfuze

hi ali,
as for your question related to excel upload via lsmw , please find the below links to be usefull
[Upload of excel file in LSMW]
[Upload excel by LSMW for FV60 ?]
[Upload Excel file through LSMW]
[How upload an excel file using an LSMW.]
regards,
koolspy.

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Upload transaction data first BW report don't have master data description

Hi All Expert,
Im newbie to BW.
When i do my task, i upload the transaction data first and then upload the master data (customer, vendor) secondly.
When i viewing my BW report, it didn't show up the Name of customer and vendor.
Izzit because the order of upload transaction data and master data is wrong so i got this problem?
How can i solve this problem? (because i try to reupload the master data again, the name field still blank)
Hope someone can advice or help me.
Thank you very much.

Check in the master data infoobject whether the texts are loaded or not. If not, load the master data texts from your source system.
Just right click on the master data infoobject and click on "Active master data".
If still it doesn't activate, go to Menu --> Tools --> Attribute change run.

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

Error in uploading the data using BDC

Hi All,
I developed a BDC to upload the data for Infotype-0195.When I am trying to upload the flatfile using Functional Module option I am getting the error Invalid Date Format.
Can anyone please help me out giving the solution..........
Thanks in advance,
Deepika

Hi Avinash,
I am passing the date field in the format MM/DD/YYYY but in the program i am converting to the format YYYYMMDD using concatenate and then passing the value to the FM but still I am getting the error.
For ur convenience I am sending the code
*-- Includes Declaration *
INCLUDE zixx_data_upload.
INCLUDE zixx_conversion_log.
INCLUDE bdcrecx1.
*-- SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK funcmod WITH FRAME TITLE text-t01.
PARAMETERS : p_fm TYPE c AS CHECKBOX.
PARAMETERS : p_ctumod TYPE ctu_mode DEFAULT '0',
 p_date TYPE c AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK funcmod.
TYPES Declaration.
Types decalration for flat file structure
*Declaration for internal table/wa for flat file structure
TYPES: BEGIN OF gt_data,
 pernr TYPE rp50g-pernr,
 begda(10) TYPE c,
 endda(10) TYPE c,
 gcase TYPE pb10_gcase,
 objps TYPE p0195-objps,
 ordcd TYPE p0195-ordcd,
 rulid TYPE p0195-rulid,
 ibaln(13) TYPE c,
 deduc(13) TYPE c,
 dedut TYPE p0195-dedut,
 li1no TYPE q0195-li1no,
 li1ex TYPE q0195-li1ex,
 nval1(13) TYPE c,
 nuni1 TYPE p0195-nuni1,
 li2no TYPE q0195-li1no,
 li2ex TYPE q0195-li2ex,
 nval2(13) TYPE c,
 nuni2 TYPE p0195-nuni2,
 addno TYPE q0195-addno,
 addex TYPE q0195-addex,
 addvl(13) TYPE c,
 addun TYPE p0195-addun,
 fstat TYPE p0195-fstat,
 exemp TYPE p0195-exemp,
 addde TYPE p0195-addde,
 levda(10) TYPE c,
 fild1 TYPE p0195-fild1,
 fild2 TYPE p0195-fild2,
 fild3 TYPE p0195-fild3,
 fild4 TYPE p0195-fild4,
 END OF gt_data,
 BEGIN OF gt_0194,
 pernr TYPE p0194-pernr,
 begda TYPE p0194-begda,
 endda TYPE p0194-endda,
 subty TYPE p0194-subty,
 lifnr TYPE p0194-lifnr,
 schid TYPE p0194-schid,
 rulnr TYPE p0194-rulnr,
 plain TYPE p0194-plain,
 orign TYPE p0194-orign,
 orcod TYPE p0194-orcod,
 ornam TYPE p0194-ornam,
 orstr TYPE p0194-orstr,
 orort TYPE p0194-orort,
 orreg TYPE p0194-orreg,
 orcnt TYPE p0194-orcnt,
 orplz TYPE p0194-orplz,
 lapdy TYPE p0194-lapdy,
 lapdt TYPE p0194-lapdt,
 gcase TYPE p0194-gcase,
 gprio TYPE p0194-gprio,
 gcate TYPE p0194-gcate,
 gstat TYPE p0194-gstat,
 rcvdd TYPE p0194-rcvdd,
 rlsdd TYPE p0194-rlsdd,
 scrul TYPE p0194-scrul,
 END OF gt_0194.
TYPES: BEGIN OF gt_data_d,
 pernr TYPE rp50g-pernr,
 begda(10) TYPE c,
 endda(10) TYPE c,
 gcase TYPE pb10_gcase,
 objps TYPE p0195-objps,
 ordcd TYPE p0195-ordcd,
 rulid TYPE p0195-rulid,
 ibaln(13) TYPE c,
 deduc(13) TYPE c,
 dedut TYPE p0195-dedut,
 li1no TYPE q0195-li1no,
 li1ex TYPE q0195-li1ex,
 nval1(13) TYPE c,
 nuni1 TYPE p0195-nuni1,
 li2no TYPE q0195-li1no,
 li2ex TYPE q0195-li2ex,
 nval2(13) TYPE c,
 nuni2 TYPE p0195-nuni2,
 addno TYPE q0195-addno,
 addex TYPE q0195-addex,
 addvl(13) TYPE c,
 addun TYPE p0195-addun,
 fstat TYPE p0195-fstat,
 exemp TYPE p0195-exemp,
 addde TYPE p0195-addde,
 fild1 TYPE p0195-fild1,
 fild2 TYPE p0195-fild2,
 fild3 TYPE p0195-fild3,
 fild4 TYPE p0195-fild4,
 END OF gt_data_d.
INTERNAL TABLE/WORK AREA Declaration.
*Declaration for internal table/wa for flat file structure
DATA: gi_data TYPE TABLE OF gt_data,
 gw_data TYPE gt_data,
 gi_0194 TYPE TABLE OF gt_0194,
 gw_0194 TYPE gt_0194,
*Declaration for BDCDATA
 gi_bdcdata TYPE STANDARD TABLE OF bdcdata,
 gw_bdcdata TYPE bdcdata,
*Declaration for BDCMSGCOLL
 gi_bdcmsgcoll TYPE TABLE OF bdcmsgcoll,
 gw_bdcmsgcoll TYPE bdcmsgcoll,
 gi_data_d TYPE TABLE OF gt_data_d,
 gw_data_d TYPE gt_data_d,
 gw_p0195 TYPE p0195,
 gw_p0194 TYPE pa0194.
DATA: gw_return TYPE bapireturn1,
*Declaration for Global Variables
 gv_count(5) TYPE c VALUE 0.
*Declaration for constants
CONSTANTS: gc_update VALUE 'L',
 gc_msgid(2) VALUE 'PG',
 gc_s_msgid(3) VALUE '102',
 gc_pa30 TYPE tstc-tcode VALUE 'PA30',
 gc_200(3) VALUE '200'.
*-- AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
nodata = ' '.
group = sy-uname.
*To change the screen attributes dynamically.
PERFORM upload_screen_output.
*-- START-OF-SELECTION *
START-OF-SELECTION.
IF p_date = 'X'.
*-- Routine to upload the file data
 PERFORM upload USING 'X' "HAS_SEPARATOR
 'ASC' "File Type
 space "ALT_SEPARATOR Alternate separator
 'X' "DISPLAY_ERROR
 'X' "ERROR_OCCURRED
 gi_data. "TABLE Table to upload into
 IF NOT gi_data IS INITIAL.
 SELECT pernr begda endda subty
 lifnr schid rulnr
 plain orign orcod
 ornam orstr orort
 orreg orcnt orplz
 lapdy lapdt gcase
 gprio gcate gstat
 rcvdd rlsdd scrul
 FROM pa0194
 INTO TABLE gi_0194
 FOR ALL ENTRIES IN gi_data
 WHERE pernr = gi_data-pernr
 AND gcase = gi_data-gcase.
*-- Routine to perform bdc
 IF sy-subrc IS INITIAL.
 IF p_fm NE 'X'.
 PERFORM bdc.
 ELSE.
 PERFORM function_module.
 ENDIF.
 ENDIF.
 ENDIF.
ELSE.
*-- Routine to upload the file data
 PERFORM upload USING 'X' "HAS_SEPARATOR
 'ASC' "File Type
 space "ALT_SEPARATOR Alternate separator
 'X' "DISPLAY_ERROR
 'X' "ERROR_OCCURRED
 gi_data_d. "TABLE Table to upload into
 IF NOT gi_data_d IS INITIAL.
 IF p_fm EQ 'X'.
 PERFORM function_module.
 ENDIF.
 ENDIF.
ENDIF.
*Perform to insert the filename in Z-Table and move the file from New
*to Processed in APP Server.
SORT gi_log BY msg_typ.
READ TABLE gi_log INTO gw_log WITH KEY msg_typ = 'E' BINARY SEARCH.
IF sy-subrc <> '0'.
 PERFORM file_moving USING gi_data.
ENDIF.
*-- END-OF-SELECTION *
END-OF-SELECTION.
*-- Routine to display conversion log
PERFORM log_display.
Subroutine Pool
*& Form BDC
 Routine to perform bdc
FORM bdc .
*Data declaration for collecting success and error records
DATA: lv_success(5) TYPE c VALUE 0,
 lv_begda TYPE string,
 lv_rlsdd TYPE string,
 lv_lapdt TYPE string,
 lv_endda TYPE string,
 lv_rcvdd TYPE string.
gv_count = 0.
PERFORM open_group.
SORT gi_0194 BY pernr gcase.
LOOP AT gi_data INTO gw_data.
 gv_count = gv_count + 1.
 READ TABLE gi_0194 INTO gw_0194 WITH KEY pernr = gw_data-pernr
 gcase = gw_data-gcase.
 IF sy-subrc = 0.
 LOOP AT gi_0194 INTO gw_0194 WHERE gcase = gw_data-grnum.
 MOVE gw_0194-begda TO lv_begda.
 MOVE gw_0194-endda TO lv_endda.
*FUNCTION MODULE TO CONVERT DATE FORMAT
 CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
 EXPORTING
 if_date = lv_begda
 IMPORTING
 ef_date = lv_begda.
 CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
 EXPORTING
 if_date = lv_endda
 IMPORTING
 ef_date = lv_endda.
 PERFORM bdc_dynpro USING 'SAPMP50A' '1000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=MOD'.
 PERFORM bdc_field USING 'RP50G-PERNR'
 gw_data-pernr.
 PERFORM bdc_field USING 'RP50G-TIMR6'
 'X'.
 PERFORM bdc_field USING 'RP50G-CHOIC'
 '0194'.
 PERFORM bdc_field USING 'RP50G-SUBTY'
 gw_0194-subty.
 PERFORM bdc_dynpro USING 'MP019400' '2000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=GROR'.
 PERFORM bdc_field USING 'P0194-BEGDA'
 lv_begda.
 PERFORM bdc_field USING 'P0194-ENDDA'
 lv_endda.
 PERFORM bdc_field USING 'P0194-LIFNR'
 gw_0194-lifnr.
 PERFORM bdc_field USING 'P0194-SCHID'
 gw_0194-schid.
 PERFORM bdc_field USING 'P0194-RULNR'
 gw_0194-rulnr.
 PERFORM bdc_field USING 'P0194-pLAIN'
 gw_0194-plain.
 PERFORM bdc_field USING 'P0194-ORIGN'
 gw_0194-orign.
 PERFORM bdc_field USING 'P0194-ORCOD'
 gw_0194-orcod.
 PERFORM bdc_field USING 'P0194-ORNAM'
 gw_0194-ornam.
 PERFORM bdc_field USING 'P0194-ORSTR'
 gw_0194-orstr.
 PERFORM bdc_field USING 'P0194-ORORT'
 gw_0194-orort.
 PERFORM bdc_field USING 'P0194-ORREG'
 gw_0194-orreg.
 PERFORM bdc_field USING 'P0194-ORCNT'
 gw_0194-orcnt.
 PERFORM bdc_field USING 'P0194-ORPLZ'
 gw_0194-orplz.
 PERFORM bdc_field USING 'P0194-LAPDY'
 gw_0194-lapdy.
 IF gw_0194-lapdt IS NOT INITIAL.
 MOVE gw_0194-lapdt TO lv_lapdt.
 CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
 EXPORTING
 if_date = lv_lapdt
 IMPORTING
 ef_date = lv_lapdt.
 PERFORM bdc_field USING 'P0194-LAPDT'
 lv_lapdt.
 ENDIF.
 PERFORM bdc_field USING 'P0194-GCASE'
 gw_0194-gcase.
 PERFORM bdc_field USING 'P0194-GPRIO'
 gw_0194-gprio.
 PERFORM bdc_field USING 'P0194-GCATE'
 gw_0194-gcate.
 PERFORM bdc_field USING 'P0194-GSTAT'
 gw_0194-gstat.
 IF gw_0194-rcvdd IS NOT INITIAL.
 MOVE gw_0194-rcvdd TO lv_rcvdd.
 CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
 EXPORTING
 if_date = lv_rcvdd
 IMPORTING
 ef_date = lv_rcvdd.
 PERFORM bdc_field USING 'P0194-RCVDD'
 lv_rcvdd.
 ENDIF.
 IF gw_0194-rlsdd IS NOT INITIAL.
 MOVE gw_0194-rlsdd TO lv_rlsdd.
 CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
 EXPORTING
 if_date = lv_rlsdd
 IMPORTING
 ef_date = lv_rlsdd.
 PERFORM bdc_field USING 'P0194-RLSDD'
 lv_rlsdd.
 ENDIF.
 PERFORM bdc_field USING 'P0194-SCRUL'
 gw_0194-scrul.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'SPOP-TEXTLINE1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'SPOP-TEXTLINE1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_dynpro USING 'MP019500' '2000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=UPD'.
 PERFORM bdc_field USING 'P0195-BEGDA'
 gw_data-begda.
 PERFORM bdc_field USING 'P0195-ENDDA'
 gw_data-endda.
 PERFORM bdc_field USING 'P0195-ORDCD'
 gw_data-ordcd.
 PERFORM bdc_field USING 'P0195-RULID'
 gw_data-rulid.
 PERFORM bdc_field USING 'P0195-IBALN'
 gw_data-ibaln.
 PERFORM bdc_field USING 'P0195-DEDUC'
 gw_data-deduc.
 PERFORM bdc_field USING 'P0195-DEDUT'
 gw_data-dedut.
Begin of Insertion V2.0 by S.NATARAJAN
 IF ( ( gw_data-li1no = '1' AND gw_data-li1ex = '' ) OR
 ( gw_data-li1no = '' AND gw_data-li1ex = '' ) ).
 IF ( ( gw_data-li1no = '1' AND gw_data-li1ex = '' ) OR
 ( gw_data-li1no = '' AND gw_data-li1ex = '' ) OR
 ( gw_data-li1no = '' AND gw_data-li1ex = '2' ) ).
End of Insertion V2.0 by S.NATARAJAN
 PERFORM bdc_field USING 'Q0195-LI1NO'
 'X'.
 PERFORM bdc_field USING 'P0195-NVAL1'
 gw_data-nval1.
 PERFORM bdc_field USING 'P0195-NUNI1'
 gw_data-nuni1.
Begin of Insertion V2.0 by S.NATARAJAN
 ELSEIF gw_data-li1no = '' AND gw_data-li1ex = '2' .
 ELSEIF ( gw_data-li1no = '' AND gw_data-li1ex = '1' ) .
End of Insertion V2.0 by S.NATARAJAN
 PERFORM bdc_field USING 'Q0195-LI1EX'
 'X'.
 PERFORM bdc_field USING 'P0195-NVAL1'
 gw_data-nval1.
 PERFORM bdc_field USING 'P0195-NUNI1'
 gw_data-nuni1.
 ENDIF.
Begin of Insertion V2.0 by S.NATARAJAN
 IF ( ( gw_data-li2no = '1' AND gw_data-li2ex = '' ) OR
 ( gw_data-li2no = '' AND gw_data-li2ex = '' ) ).
 IF ( ( gw_data-li2no = '1' AND gw_data-li2ex = '' ) OR
 ( gw_data-li2no = '' AND gw_data-li2ex = '' ) OR
 ( gw_data-li2no = '' AND gw_data-li2ex = '2' ) ).
 PERFORM bdc_field USING 'Q0195-LI2NO'
 'X'.
 PERFORM bdc_field USING 'P0195-NVAL2'
 gw_data-nval2.
 PERFORM bdc_field USING 'P0195-NUNI2'
 gw_data-nuni2.
Begin of Insertion V2.0 by S.NATARAJAN
 ELSEIF ( gw_data-li2no = '' AND gw_data-li2ex = '2' ).
 ELSEIF ( gw_data-li2no = '' AND gw_data-li2ex = '1' ).
End of Insertion V2.0 by S.NATARAJAN
 PERFORM bdc_field USING 'Q0195-LI2EX'
 'X'.
 PERFORM bdc_field USING 'P0195-NVAL2'
 gw_data-nval2.
 PERFORM bdc_field USING 'P0195-NUNI2'
 gw_data-nuni2.
 ENDIF.
Begin of Insertion V2.0 by S.NATARAJAN
 IF ( ( gw_data-addno = '1' AND gw_data-addex = '' ) OR
 ( gw_data-addno = '' AND gw_data-addex = '' ) ).
End of Insertion V2.0 by S.NATARAJAN
 IF ( ( gw_data-addno = '1' AND gw_data-addex = '' ) OR
 ( gw_data-addno = '' AND gw_data-addex = '' ) OR
 ( gw_data-addno = '' AND gw_data-addex = '2' ) ) .
 PERFORM bdc_field USING 'Q0195-ADDNO'
 'X'.
 PERFORM bdc_field USING 'P0195-ADDVL'
 gw_data-addvl.
 PERFORM bdc_field USING 'P0195-ADDUN'
 gw_data-addun.
Begin of Insertion V2.0 by S.NATARAJAN
*ELSEIF gw_data-addno = '' AND gw_data-addex = '2' .
 ELSEIF ( gw_data-addno = '' AND gw_data-addex = '1' ).
End of Insertion V2.0 by S.NATARAJAN
 PERFORM bdc_field USING 'Q0195-ADDEX'
 'X'.
 PERFORM bdc_field USING 'P0195-ADDVL'
 gw_data-addvl.
 PERFORM bdc_field USING 'P0195-ADDUN'
 gw_data-addun.
 ENDIF.
 PERFORM bdc_dynpro USING 'MP019500' '2000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=UPD'.
 PERFORM bdc_dynpro USING 'MP019400' '2000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/EBCK'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'SPOP-TEXTLINE1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'SPOP-TEXTLINE1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_dynpro USING 'MP019500' '2000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=UPD'.
 CALL TRANSACTION gc_pa30 USING gi_bdcdata
 MODE p_ctumod
 UPDATE gc_update
 MESSAGES INTO gi_bdcmsgcoll.
 PERFORM bdc_transaction USING gc_pa30.
 gi_bdcmsgcoll[] = messtab[].
 LOOP AT gi_bdcmsgcoll INTO gw_bdcmsgcoll.
 IF gw_bdcmsgcoll-msgnr NE gc_200.
 IF gw_bdcmsgcoll-msgid = gc_msgid.
 IF gw_bdcmsgcoll-msgnr EQ gc_s_msgid.
 ADD 1 TO lv_success.
 ENDIF.
 ENDIF.
 gw_log-msg_id = gw_bdcmsgcoll-msgid.
 gw_log-msg_num = gw_bdcmsgcoll-msgnr.
 gw_log-msg_key = gw_bdcmsgcoll-msgv1.
 gw_log-msg_typ = gw_bdcmsgcoll-msgtyp.
 gw_log-rec_no = gv_count.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = gw_log-msg_id
 no = gw_log-msg_num
 v1 = gw_bdcmsgcoll-msgv1
 v2 = gw_bdcmsgcoll-msgv2
 v3 = gw_bdcmsgcoll-msgv3
 v4 = gw_bdcmsgcoll-msgv4
 IMPORTING
 msg = gw_log-msg_txt
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CONCATENATE gw_log-msg_txt 'for Personnel No -' ''''
 gw_data-pernr '''' 'Case -' '''' gw_data-gcase
 '''' INTO gw_log-msg_txt SEPARATED BY space.
 APPEND gw_log TO gi_log.
 REFRESH gi_bdcmsgcoll.
 ENDIF.
 ENDLOOP.
 CLEAR : lv_begda,lv_endda,
 lv_lapdt,lv_rlsdd.
 ELSE.
 gw_log-msg_id = 'CUST'.
 gw_log-msg_num = 'XXX'.
 gw_log-msg_key = 'USK'.
 gw_log-msg_typ = 'E'.
 gw_log-rec_no = gv_count.
 CONCATENATE 'Case -' '''' gw_data-gcase ''''
 'does not exists for Personnel No -'
 '''' gw_data-pernr ''''
 INTO gw_log-msg_txt SEPARATED BY space.
 APPEND gw_log TO gi_log.
 ENDIF.
 ENDLOOP.
 CLEAR : gw_0194, gw_data.
 REFRESH gi_bdcdata.
ENDLOOP.
FREE gi_data.
gv_tot_rec = gv_count.
gv_suc_rec = lv_success.
gv_err_rec = gv_count - lv_success.
gv_ifnam = p_upfile.
PERFORM close_group.
ENDFORM. " BDC
*& Form FUNCTION_MODULE
 text
FORM function_module .
IF p_date = 'X'.
 LOOP AT gi_data INTO gw_data.
 gv_count = gv_count + 1.
 SELECT SINGLE pernr begda endda subty grnum
 FROM pa0194
 INTO CORRESPONDING FIELDS OF gw_p0194
 WHERE pernr = gw_data-pernr
 AND gcase = gw_data-gcase.
 IF sy-subrc = 0.
 MOVE-CORRESPONDING gw_data TO gw_p0195.
 CONCATENATE gw_data-begda6(4) gw_data-begda3(2)
 gw_data-begda+0(2)
 INTO gw_p0195-begda.
 CONCATENATE gw_data-endda6(4) gw_data-endda3(2)
 gw_data-endda+0(2)
 INTO gw_p0195-endda.
 CONCATENATE gw_data-levda6(4) gw_data-levda3(2)
 gw_data-levda+0(2)
 INTO gw_p0195-levda.
 gw_p0195-grnum = gw_p0194-grnum.
 gw_p0195-nein1 = ' '.
 gw_p0195-nein2 = ' '.
 gw_p0195-addin = ' '.
 IF ( gw_data-li1no = '' AND gw_data-li1ex = '1' ) .
 gw_p0195-nein1 = '1'.
 ELSEIF ( gw_data-li1ex = '2' OR gw_data-li1ex = '' ).
 gw_p0195-nein1 = '2'.
 ENDIF.
 IF ( gw_data-li2no = '' AND gw_data-li2ex = '1' ) .
 gw_p0195-nein2 = '1'.
 ELSEIF ( gw_data-li2ex = '2' OR gw_data-li2ex = '' ).
 gw_p0195-nein2 = '2'.
 ENDIF.
 IF ( gw_data-addno = '' AND gw_data-addex = '1' ) .
 gw_p0195-addin = '1'.
 ELSEIF ( gw_data-addex = '2' OR gw_data-addex = '' ).
 gw_p0195-addin = '2'.
 ENDIF.
 CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
 EXPORTING
 number = gw_p0195-pernr
 IMPORTING
 return = gw_return.
 IF gw_return-type NE 'E'.
 CALL FUNCTION 'HR_INFOTYPE_OPERATION'
 EXPORTING
 infty = '0195'
 number = gw_p0195-pernr
 validityend = gw_p0195-endda
 validitybegin = gw_p0195-begda
 record = gw_p0195
 operation = 'INS'
 dialog_mode = p_ctumod "Mod-01
 tclas = 'A'
 nocommit = ' '
 IMPORTING
 return = gw_return.
 CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
 EXPORTING
 number = gw_p0195-pernr.
 ENDIF.
 IF gw_return IS NOT INITIAL.
 gw_log-msg_id = gw_return-id.
 gw_log-msg_num = gw_return-number.
 CONCATENATE gw_data-pernr gw_data-gcase INTO
 gw_log-msg_key SEPARATED BY '|'.
 gw_log-msg_typ = gw_return-type.
 gw_log-rec_no = gv_count.
 gw_log-msg_txt = gw_return-message.
 ELSE.
 gw_log-msg_id = 'CUST'.
 gw_log-msg_num = '000'.
 CONCATENATE gw_data-pernr gw_data-gcase INTO
 gw_log-msg_key SEPARATED BY '|'.
 gw_log-msg_typ = 'S'.
 gw_log-rec_no = gv_count.
 gw_log-msg_txt = 'Record Created'(t02).
 ENDIF.
 ELSE.
 gw_log-msg_id = 'CUST'.
 gw_log-msg_num = 'XXX'.
 CONCATENATE gw_data-pernr gw_data-gcase INTO
 gw_log-msg_key SEPARATED BY '|'.
 gw_log-msg_typ = 'E'.
 gw_log-rec_no = gv_count.
 gw_log-msg_txt = 'Case does not exists for Personnel No'(t03).
 ENDIF.
 APPEND gw_log TO gi_log.
 CLEAR : gw_log,gw_return,gw_data,gw_p0194,gw_p0195.
 ENDLOOP.
ELSE.
 LOOP AT gi_data_d INTO gw_data_d.
 gv_count = gv_count + 1.
 SELECT SINGLE pernr begda endda subty grnum
 FROM pa0194
 INTO CORRESPONDING FIELDS OF gw_p0194
 WHERE pernr = gw_data_d-pernr
 AND gcase = gw_data_d-gcase.
 IF sy-subrc = 0.
 MOVE-CORRESPONDING gw_data_d TO gw_p0195.
 CONCATENATE gw_data_d-begda6(4) gw_data_d-begda3(2)
 gw_data_d-begda+0(2)
 INTO gw_p0195-begda.
 CONCATENATE gw_data_d-endda6(4) gw_data_d-endda3(2)
 gw_data_d-endda+0(2)
 INTO gw_p0195-endda.
 gw_p0195-grnum = gw_p0194-grnum.
 gw_p0195-nein1 = ' '.
 gw_p0195-nein2 = ' '.
 gw_p0195-addin = ' '.
 IF ( gw_data_d-li1no = '' AND gw_data_d-li1ex = '1' ) .
 gw_p0195-nein1 = '1'.
 ELSEIF ( gw_data_d-li1ex = '2' OR gw_data_d-li1ex = '' ).
 gw_p0195-nein1 = '2'.
 ENDIF.
 IF ( gw_data_d-li2no = '' AND gw_data_d-li2ex = '1' ) .
 gw_p0195-nein2 = '1'.
 ELSEIF ( gw_data_d-li2ex = '2' OR gw_data_d-li2ex = '' ).
 gw_p0195-nein2 = '2'.
 ENDIF.
 IF ( gw_data_d-addno = '' AND gw_data_d-addex = '1' ) .
 gw_p0195-addin = '1'.
 ELSEIF ( gw_data_d-addex = '2' OR gw_data_d-addex = '' ).
 gw_p0195-addin = '2'.
 ENDIF.
 CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
 EXPORTING
 number = gw_p0195-pernr
 IMPORTING
 return = gw_return.
 IF gw_return-type NE 'E'.
 CALL FUNCTION 'HR_INFOTYPE_OPERATION'
 EXPORTING
 infty = '0195'
 number = gw_p0195-pernr
 validityend = gw_p0195-endda
 validitybegin = gw_p0195-begda
 record = gw_p0195
 operation = 'INS'
 dialog_mode = p_ctumod "Mod-01
 tclas = 'A'
 nocommit = ' '
 IMPORTING
 return = gw_return.
 CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
 EXPORTING
 number = gw_p0195-pernr.
 ENDIF.
 IF gw_return IS NOT INITIAL.
 gw_log-msg_id = gw_return-id.
 gw_log-msg_num = gw_return-number.
 CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
 gw_log-msg_key SEPARATED BY '|'.
 gw_log-msg_typ = gw_return-type.
 gw_log-rec_no = gv_count.
 gw_log-msg_txt = gw_return-message.
 ELSE.
 gw_log-msg_id = 'CUST'.
 gw_log-msg_num = '000'.
 CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
 gw_log-msg_key SEPARATED BY '|'.
 gw_log-msg_typ = 'S'.
 gw_log-rec_no = gv_count.
 gw_log-msg_txt = 'Record Created'(t02).
 ENDIF.
 ELSE.
 gw_log-msg_id = 'CUST'.
 gw_log-msg_num = 'XXX'.
 CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
 gw_log-msg_key SEPARATED BY '|'.
 gw_log-msg_typ = 'E'.
 gw_log-rec_no = gv_count.
 gw_log-msg_txt = 'Case does not exists for Personnel No '(t03).
 ENDIF.
 APPEND gw_log TO gi_log.
 CLEAR : gw_log,gw_return,gw_data_d,gw_p0194,gw_p0195.
 ENDLOOP.
ENDIF.
ENDFORM.
Thanks.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

SAP BPC 7.5 - Netweaver- File Upload -Transaction data along with comments

Hi,
We have a requirement to upload a file containing comments along with transaction data.
We are planning to store commnents in a Ztable from the flat file and read and post comments in the BADI
using UJC*Add_cmt.
Use a custom process chain to execute the above steps and link to a pakage.
Please let me know if there is a better process/how to doc and any code for the above.
Your early reponse is much appreciated.
Regards,
Venkata

Hi Venkata,
*MVAL function allows you to use multiple time period columns. I don't think this may help your scenario. I my opinion you may need to use two transformation files to bring the data from BW cube to BPC. BPC is an account base model, I don't think you can load the data in two columns in BW cube using one transformation file.
Thanks

Error while uploading master data attributes thru flat file

while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a new

This just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet. The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version.
The best way to correct this error is to reload RSA1. Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench.
Brian

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error while loading transaction data from an Infoprovider Mapping C_ACCT

Hi Gurus,
We are implementing BPC Consolidation for NetWeaver 7.5, and we're facing the following situation:
We have loaded master data from 0RC_ACCOUNT (group account) to our dimension C_ACCT without a problem, but when we run the loading package from an infoprovider 0FIGL_C10 (Transactional Data), the following error message appear:
Dimension: Member C_ACCT: 000 not valid
We already check data in source InfoProvider and there's no record with 000 account value.
Any suggestions?
Thanks in advance
Best Regards
Abraham Méndez

Rad,
See if SAP note# 492647 & 849501 is of some help in your scenario.

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

ERROR while uploading the data into ztable with background processing

Hi gurus,
i am trying to upload the data from excel file to internal table
its working fine ..
but........
if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
Regards,
Sri

Hi,
FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
refer below code
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string,
         l_index TYPE sy-tabix.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
Regards,
Prashant

Error in Uploading the data in Info Cube

Hi,
We are implementing SCM 5.0 APO and ECC 6.0 in UK/I client.
At the moment we are facing one problem in uploading the Excel file into Info Cube.which was working perfectly earlier.
Through analysis, we come to know that data flows thru PSA. but when we try to push that data from PSA manually system gives following error message;
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSR_X_MESSAGE
What happened?                                                                                |
|    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not
adquately responded to, the running ABAP program 'SAPLRRMS' has to be    terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Missing Handling of Application Exception                                                        Program                              RSABW_START_NEW
Trigger Location of Exception                                                                     Program                                 SAPLRRMS
Include                                 LRRMSU13                                              Row                                     78
Module type                             (FUNCTION)                                            Module Name                             RRMS_X_MESSAGE
if somebody can give advice on this! As we could upload the data earlier perfectly.
Thanks
Regards
Jignesh.

Hi Jignesh,
                  I this the first time you are loading into the cube? Is it the a fresh installation?
The error message doesn't help you much but I would try a couple of things
1. Replicate the datasources in source system, Activate the transfer and update rules and then try to load
2. Try loading only till the PSA and then try to simulate the update to cube. If you are using BI 7.0, then just load the info package, it will load to PSA and unless you run the DTP, it doesnot update the cube.
3. This can also be a GUI issue. Make sure that you have all the GUI files installed. Is it a dump with message "CX_RSR_X_MESSAGE"?
Check the Note 763203 - Termination during InfoCube realignment
Hope this helps. Please donot hesitate to ask more questions.

Error while loading transaction data

Dear Guru's
I am loading transaction data which got terminated giving processing overdue error .
While analysing i found there are lot of records in psa marked in red .
Please suggest how to resolve and to load valid records.
Regards
Karan

Hi,
While analysing i found there are lot of records in psa marked in red .
Correct the error records in PSA.Error will be in different ways (Ex Special chars, unit conversionu2026etc) so try to find the cause of the error and correct it.
Before this make the QM status (in target) and technical status (in monitor screen) of error request to red and delete the request from target. Then only you can change the records in PSA.
After correcting click on the tab Process manually in monitor screen or go to manage of the PSA (data source) click on schedule immediately. Error request will be updated again.
I am loading transaction data which got terminated giving processing overdue error.
Just wait for some time until it is loaded.
Still it is not resolved See the error criteria in monitor screen status tab.
Normally this type of message comes due to internal table space. Try to reduce the packet size and increase no of packets. Consult the basis persons to increase the table space and clean the logs.
Delete the request from the target and load again.
With regards,
Kishore.
Edited by: Siv Kishore on May 26, 2009 10:47 AM

Error in uploading transaction data

Similar Messages

Maybe you are looking for