I will begin a project with J2me

I will begin a project with J2me at school.I just have some basic knowledge about J2se,and would you kind enough to give me some advice on how to get the first step?

start with basic understanding of Midlets, Lists , Forms , CommandListeners and Record Stores.

Similar Messages

Logic X playhead will not start at the beginning of project.

Logic X playhead will not start at the beginning of project. When I push play, it starts from a point from which I was working earlier. When I press play from beginning, it will only play from that other point. I've tried saving the project with the playhead at the beginning, after dragging it there, then closing and re-opening the project but it still starts playback at that undesired point!...even when I push the stop button twice, (go to beginning) it does not go!...Why does this happen?

It is behaving as though there is a marquee at that point but I did not have one... I placed one at a different point and it played from there (normal) but when I turned it off, it went back to my 'problem' point! And, after mousing around with a few marquees and playhead 'drags', it was "fixed"... But I never knew what the problem stemmed from... And...It tends to happen on occasion, in different projects.... I'll continue to monitor these glitch events, and keep you posted!

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

FB4 errors will not go away when opening project with FB3

I decided to download FB4 and I opened a project that I had been working on in FB3 and I got these errors:
The style 'backgroundGradientAlphas' is only supported by type 'mx.core.WindowedApplication' with the theme(s) 'halo'. I found out how to fix this in FB4, but I decided it would be too much trouble to try to convert this project, so I decided to go back to FB3 to finish it. So I opened the project with my FB3 and the errors are still there.
How can I get these to go away?

You don't have to convert the project, you can still use SDK 3.
1) Project properties > Flex Compiler
2) Under Flex SDK version, choose Flex 3.5
You can also import older SDKs in Window > Preferences > Flash Builder > Installed Flex SDKs.
I'm not sure how you would see compiler errors from FB4 in FB3 unless you were somehow sharing the same workspace in both. Sharing a workspace in that way is unsupported.
Jason San Jose
Software Engineer, Flash Builder

Whenconnecting to the internet thru safari, the requested page will begin to appear and then the screen will revert to the iPad home page. Have powered the ipad down and back yp with no change.

When I connect to the internet thru Safari, the requested page will begin to appear and then revert to the Ipad home page. I have powered of and back on and wi-fi signal is strong. any suggestions.

Safari crash regularly
https://discussions.apple.com/thread/2460899?tstart=30

Is SAPI working fine with J2ME..?

helllo..
i wana to do my final project in speech recogniton.. application for PDA's..
is the cureently SAPI.working fine with J2ME....Can i use it.. for PDA's application
Message was edited by:
M_Suhail

Hi, i am also doing JSAPI for my FYP for pocket PC..I have tried freeTTS, sphinx4. All the demo can work. But when i try to use the 'Hello' programe from sun page, it can't work. Some null error after i hit the RUN button. dun know why. Den some ppl say the JSAPI that is availabe from the freeTTS, is not able to support the javax.speech.reconigation. I have not try out cloudgarden. but that one is only able us to use for 30days. after which. have to buy. Den is that version able to be use for pocketPC, or rather is it name as j2me?
I have also found another one. pocketsphinx(free open source). ITs suppose to be for PPC. think u can try that out. but it's in C++ it hink. but i dun know how to use it. If u know, pls let mi know how.
I only need to have a Command reconigation. after the reconation, it will send a btye of data thru the serial port profile of bluetooth.. Anyone has the open source of the voice thingy., pls share with us.
tks
[email protected]

Learning PHP, should I wait for PHP 6 or begin right now with 5?

Easy question, I guess. I want to learn PHP, but since PHP 6 is close, perhaps I could wait, but if it will be easy to switch from 5 to 6, perhaps I could begin right now with 5 and then learn 6, what do you think?

Svenstaro wrote:
LTSmash wrote:
PHP will stay the same barely-afloat, patched-together language that it is now. No offense, but that's what PHP is.
xD
Well I liked PHP syntax somehow when I readed some code, and also that it can be used for web and desktop apps, but if you've got a better suggestion instead of flaming you could of course say that
I actually didn't mean to flame, hence my "no offense" but people who are used to languages with more structure and design might be slightly bewildered. As I said, I use PHP myself for various projects, it's a love-hate thing really. Anyway, I found myself productive in replying here by stating that I would recommend PHP for whatever dynamic web page has to be made. It DOES get the job done easily, just it usually isn't pretty .
Don't worry about that, I was at a conference held by Lukas Smith ( PHP's Release Manager ) yesterday, and he himself told everyone that PHP is a "patchy" language were there are no defined rules, no real guidelines or anything, but that's also why it's so powerful ( still some guy who came to discover what was PHP were kinda scared xD ). It also prove once more that the community can do awesome work and that open-source is a really good way to go

Is there a way of working collaboratively on a flex project with a small project group?

Is there a way of working collaboratively on a flex project with a small project group?
I am part of a small group of developers who wish to work on a single flex project together. Is there a way to set up flex so that the project can be developed by multiple people at the same time. I have seen one thread out on the internet about working locally and then uploading to SVn but this is not an option in this case.
Any ideas.
Many thanks in advance
Dave

I would say that rushing into development without a source-control system will cost you more in the long-run. If your organisation is serious about developing software it then it needs to invest in the necesary infrastructure, so you should get that process kicked-off as soon as possible.
In the interim you could set-up a source control server on one developer's machine or commandeer a spare machine to use as a temporary source control server. Just make sure you have it backed-up regularly. Or you could use one of the online source control services; many will support private repositories for a small fee.

How do I create a NetBeans project with multiple JavaFX (FXML) dialogs?

I'm very new to Java and JavaFX, so forgive what is probably a question asked a thousand times, but I can't seem to find the answer.
I come from a Visual Studio (C# with WPF) background. I'm used to creating a Solution then adding a Project for each dialog/window that gets included in the Solution. Each dialog/window is a class derived from Window, and I simply create an instance of that class when I need to use the dialog.
What I need to do is have a main window (stage) that contains two lists of participants (a red team and a blue team).
Then I need a separate dialog for entering the information for the participant. So when a button on the main stage is pressed ("Add Red Participant"), I want to open the ParticipantDialog. When the "OK" or "Close" button on the Participant dialog is clicked, I want the dialog to be able to return a participant object to the main stage.
Then the main stage adds that participant to the appropriate list.
What I've gathered so far is that I will be creating an FXML file for the Participant dialog (and I assume an associated controller). Then when the "Add" button is pressed, I will call an FXMLLoader to load that FXML dialog. Something like this:
FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("ParticipantDialog.fxml"));
Scene scene = (Scene)fxmlLoader.load();
final Stage participantDialog = new Stage();
participantDialog.setScene(scene);
First question is: is that correct so far? Am I at least on the right track?
Next question is: how or where do I create the FXML and controller files for the participant dialog using NetBeans? Should I create a separate project to make the participant dialog and then copy those files over, or is there a way to make the files within the parent project? And if I make the participant dialog in a separate project, what's the easiest way to access it from my main stage?
I feel like I'm missing something simple here because this seems a lot harder than it should be.
Thanks in advance for any advice.

> is that correct so far?
Yes the sample code you have is fine to launch a new dialog when your Add button is pressed .
> I create the FXML and controller files for the participant dialog using NetBeans?
You can edit FXML text in NetBeans, but I think that is kind of tedious.
You might want to create the FXML using SceneBuilder.
You can use SceneBuilder in NetBeans.
You may want to get it working without FXML first.
For example, use the JavaFX scene graph API, then convert your program to use FXML once you are more comfortable with the JavaFX system.
The piecemeal approach cuts down on the amount of learning you need to do at one time.
> Should I create a separate project to make the participant dialog and then copy those files over.
No.
Just use a single NetBeans project.
You will have separate FXML files for your main stage and your participant dialog, but they will both be placed in the same NetBeans project.
> is there a way to make the files within the parent project?
In NetBeans 7.3.1, do the following:
File | New Project | JavaFX | JavaFX FXML Application
This will create a sample project with a sample fxml file.
Modify the sample project files to get what you want, changing the sample fxml to your main stage fxml and adding a new participant fxml to the same directory.

TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
Regards.

Not able to create a web project with jsf or jsp or struts or spring

Hi,
I am trying to create a dynamic web project with jsf or jstl or struts or spring or any of web options available for a web project, but I am not able to do it.
When I choose any of these options, the wizard asks me to "select an existing jstl/jsf/Spring 2.0 library, or click Add to add a new library." and since it doesn't show any existing libraries there, I clicked on add new library. When I click add, it opens a new dialog box where it has two options :
1. to use spring/jstl/jsf lib from bea web site - when I choose this option, it tries to connect to the bea web site and gives me error that "connect time out". I don't know why it is not able to connect to the internet. I am not able to see the help also. There it gives error "The requested URL could not be retrieved".
2. to use libraries from an existing spring installation - I provide the path of a directory where spring lib are, but then it gives me error that this is not a valid installation.
On another machine, I am able to see the help contents, but still not able to get these libraries from the bea site.
Please help.
Thanks in advance,
Sushma

Hi Sushma,
The issue you are facing has been addressed and will be part of the next release. For the current release, please follow the steps listed below.
Send an email to [email protected] with details on specific facets you are trying to enable on your project.
You will be provided with a url where you can download the required jars and details on how to manually add the jars to the workspace which will prevent the download on demand scenario.
Cheers
Raj

Is it possible to link data across different/multiple PWA sites leveraging Master Project with the Subprojects feature?

A couple different questions /similar scenarios
1) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at a third (or X) site (http://server/pwa3)
2) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at one of the original sites (http://server/pwa1 (for example))
OR is there a better way to do this/more preferred way to do this.
We found this (http://social.technet.microsoft.com/Forums/projectserver/en-US/2379c3f2-6c80-46d7-8eac-3bc2ccb2d908/master-projectsubproject-with-sites-in-pwa-2010?forum=projectserver2010general)
but its not what we're looking for
3a) Issue/Example -
We want to set up a site (http://server/pwa100) for just the president of the company - all the schedules of the subsites (/pwa99 + /pwa98) create a feed into an integrated master schedule/master project with subprojects(located
in /pwa100).
3b-1) We also want to set up sub sites (http://server/pwa99 and
http://server/pwa98) for each division VPs (and specific other people). These two sites would only allow specific user's project files to be viewed by each other...
Can their project files have linkages between the two project sites (/pwa99 and /pwa98)? Meaning if user1 logs in to /pwa99 can he see a project file (given that they have permission) from /pwa98 in the same instance?
3b-2) Can they see the project file in ProjPro and/or PWA ???
3c) is it possible to have:
+ /pwa100 (pres)
++/pwa99 & /pwa98 (two vps)
+++/pwa97 & /pwa96 & /pwa95 & /pwa-etc (minions)
each rolling up to the next level (level 3 rolls up to level 2 which can roll up to level 1)

kbwrecker,
I agree with Dale. Having multiple sites will make this difficult to set up.
Not knowing how your Custom Groups/Categories have been set up, have you looked into using the "Project Permissions" feature to share projects. These permissions are 'additive' to the category permissions, so you could start out with people looking at the
projects they are authorized to via categories, and then let them share/add people as needed basis. This will also satisfy the requirement of not-loading the projects with resources..
And finally, the department and categories need not align, except that when projects from one dept are shared t another dept resource, the visibility of custom fieds will be affected.
Hope I did not go off on a tangent there :)
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com
Meant to get back to this earlier - your answer is close (because its what we currently do..sort-of)
From my understanding of this issue the users are separated by department and can only see specific projects; however, when they try to share departments between users (so they can see their projects (dept a sees dept b projects)) this works - but there
is a bigger issue/main issue.
main issue: when dept B adds a new project dept. A cannot see the new project in dept B.
This can be eliviated by removing the user/s and re-adding them to the permission structure of the deptment but overall doing this several times based on user/s and projects being added it gets to be cumbersome and just plain annoying.
Any help/additional thoughts would be great

How to find out the projects with status "Invalid"?

I'm new to Oracle Projects -OP. We are on 12.0.4. This' my new job.
I have a task of "Remove projects with status 'Invalid' ".
Questions:
How to access the OP forms to verify the existent of the invalid projects?
What are the PA tables having the status info -- I mean those showing the status with 'Invalid'?
Thanks A lot.
an apps dba

I could not find a sample for the DELETE_PROJECT. I have coded the delete project by modifying the sample of the CREATE_PROJECT.
-- delete a project with the status INVALID shown in pa_project_statuses.project_status_name
--set serveroutput on size 20000
DECLARE
-- Variables needed for API standard parameters
l_api_version_number          NUMBER := 1.0;
l_commit               VARCHAR2(1) := 'F';
l_return_status          VARCHAR2(1);
l_init_msg_list          VARCHAR2(1) := 'F';
l_msg_count               NUMBER;
l_msg_index_out          NUMBER;
l_msg_data               VARCHAR2(2000);
l_data               VARCHAR2(2000);
l_pm_product_code          VARCHAR2(10);
l_responsibiity_id          NUMBER;
l_user_id               NUMBER;
l_pm_project_reference     PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
l_pa_project_id          PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
API_ERROR               EXCEPTION;
BEGIN
-- GET GLOBAL VALUES
select user_id, responsibility_id
    into l_user_id, l_responsibiity_id
    from pa_user_resp_v
   where user_name = 'J23N';          -- need to get from Apps
--SET GLOBAL VALUES
    pa_interface_utils_pub.set_global_info(
    p_api_version_number     => 1.0,
       p_responsibility_id     => l_responsibiity_id,
       p_user_id          => l_user_id,
    p_msg_count          => l_msg_count,
       p_msg_data          => l_msg_data,
       p_return_status          => l_return_status);
-- PRODUCT RELATED DATA
l_pm_product_code := 'R_INVALID';           -- can be user defined
-- PRODUCT DATA (PROJECT_IN_REC_TYPE)
   l_pm_project_reference.pm_project_reference := null;
   l_pa_project_id.pa_project_id := 1001;
--INIT_CREATE_PROJECT
--pa_project_pub.init_project;
dbms_output.put_line('Before delete_project');
--DELETE_PROJECT
pa_project_pub.delete_project(
     p_api_version_number => l_api_version_number,
     p_commit                    => l_commit,
     p_init_msg_list         => l_init_msg_list,
     p_msg_count                => l_msg_count,
     p_msg_data                  => l_msg_data,
     p_return_status         => l_return_status,
     p_pm_project_code       => l_pm_product_code,
p_pm_project_reference => l_pm_project_reference,
p_pa_project_id         => l_pa_project_id
-- Check for errors
if l_return_status != 'S'
then
    raise API_ERROR;
end if;
dbms_output.put_line('Deleted Project Id: ' || l_pa_project_id.pa_project_id);
--dbms_output.put_line('Deleted Project Number: ' || l_project_out.pa_project_number);
Commit;
--HANDLE EXCEPTIONS
-- Get the error message that were returned if it did not complete sucessfully
EXCEPTION
When API_ERROR then
    dbms_output.put_line('An API_ERROR occurred');
    if l_msg_count >= 1
    then
      for i in 1..l_msg_count loop
        pa_interface_utils_pub.get_messages(
          p_msg_data      => l_msg_data,
          p_encoded     => 'F',
          p_data           => l_data,
          p_msg_count      => l_msg_count,
          p_msg_index_out => l_msg_index_out);
        dbms_output.put_line('error message: ' || l_data);
      end loop;
      rollback;
    end if;
When OTHERS then
    dbms_output.put_line('An error occured, sqlcode = ' || sqlcode);
    if l_msg_count >= 1
      then
      for i in 1..l_msg_count loop
        pa_interface_utils_pub.get_messages(
          p_msg_count      => l_msg_count,
          p_encoded     => 'F',
          p_msg_data      => l_msg_data,
          p_data           => l_data,
          p_msg_index_out => l_msg_index_out);
        dbms_output.put_line('error message: ' || l_data);
      end loop;
      rollback;
    end if;
END;Can anyone with the experience of PA_PROJECT_PUB make comment on this Delete Project block? On the struncture level is it correct?
I run it and get
pa_project_pub.delete_project(
ERROR at line 48:
ORA-06550: line 48, column 3:
PLS-00306: wrong number or types of arguments in call to 'DELETE_PROJECT'
ORA-06550: line 48, column 3:
PL/SQL: Statement ignored
Please make your comment on the structure (the logic) of the delete project before providing the advice on the debug.
I would like to make sure the logic is correct first.
TIA

DVD authoring after editing project with FCP X

FCP X has extremely limited DVD authoring options within it. Can't put more than one short movie on a disc, only two menu templates to choose from, etc. So my question is what do I use to author a DVD after editing projects with FCP X? I know I need to use Compressor to set chapter points, etc., but what do I use to build the DVD menu and burn the DVD? I certainly hope I am not limited to iDVD only, which is not really a pro application, and I gather that DVD Studio Pro is no longer being sold. Amazingly, I asked this question at a One-to-One session at an Apple Store and the guy there suggested Adobe Encore ... I was totally shocked! Does anyone have an answer to all this?

Encore is very good, but you have to buy PPro to get it, you could look on eBay for a copy of DVDSP. It does look like Apple will not be offering a Pro Level DVD authoring package anymore, it's a shame as DVDSP works very well still and they could have just offered it as a standalone.

Multiple Quizzes in a project with Branching

Hello,
I am creating a project with branching - based on some
criteria, a user will take a path that will not bring them back to
a common quiz at the end. Each path should have its own quiz in the
end. How do I make only one of the quizzes' results to be counted
on the LMS?
For example, the course is about a certain process and based
on my role, at some point I will choose a path that teaches me how
to do my part of the process. At the end, I will be asked questions
for my part only and I want to see the scores on the LMS only for
that one quiz.
Thank you!

Hi.
I'm very interested in the branch-awareness feature.
Here's my scenario (in a nutshell).
People are attending ONE event out of 4 in different geographic locations. A, B, C, D.
Each event has several sessions that are elective. People can go to any combination of sessions they'd like within those available at the event. Let's say sessions X, Y, Z for simplicity's sake.
Each session has a series of questions to test retention. Let's say questions *1, *2, *3 for now.
All in ONE quiz file.
1. Learners access the quiz and its introduction page.
2. Choose the first event, in this case event C.
3. Land on the event C landing slide that contain links to first questions of each session.
4. Select session Z.
5. Land on first question of event C, session Z.
6. Answer (submit) questions Z1, Z2, Z3 from that session CZ.
7. Go to the event C main menu (upon submitting the Z3 question and "continue"). This is an alternate event C menu that contains a slight modification: now a "Those were all the sessions I attended, take me to the quiz results page] + links to other sessions branches for event C.
8. Depending on the choice on step 7, learner chooses another session's series of questions OR is taken to the final quiz results page. Score is computed at an 80% passing score ONLY counting the questions that HAVE been answered, not all the other questions in sessions not attended.
Does this make sense? Will it work on Captivate 6 via branch-aware quizzing?
Thanks.

I will begin a project with J2me

Similar Messages

Maybe you are looking for