Error in User defined function

I have created a user defined function to make a call to SAP using JCo.
But I am getting an error "package com.sap.mw.jco does not exist"
Do we need to install JCo on our server?
Thanks in advance

Hallo Vijaya Kumari,
if you use XI3.0 then you should check csn note 753294:
Symptom
A message mapping contains a user-defined function that uses a class
from the "com.sap.mw.jco", "sapxmltoolkit" or "com.sap.tc.Logging"
library. An error stating that the source code contains syntax errors
occurs when you test or activate the message mapping. When you use a
class from "com.sap.mw.jco", the system reports, for example, "package
com.sap.mw.jco does not exist".
This error only occurs in systems containing a Support Package lower
than 5.
Solution
Import Support Package 5 or higher.
You can use the following workaround as a short-term solution: Upload
the library that is referenced in the message mapping into the software
component of the message mapping as an "imported archive". Do not
activate the "imported archive" with the library since it is not needed
for the runtime. The only purpose of the archive is to allow the message
mapping to be compiled. To avoid version conflicts with newer libraries,
you should delete the archive again after you import Support Package 5
or higher.
In your case you will find the relevant jar file in the path
[sap_j2ee_engine_installaltion_path]\cluster\server0\bin\ext\com.sap.mw.jco\jrfc.jar
Regards Franz

Similar Messages

Getting "Unexpected end of formula" error in user-defined function

I created a user-defined function and registered it successfully in Discoverer Admin (10g), and it shows up in Discoverer Plus. However, when I call the function, I get this error:
"Error in formula -- unexpected end of formula"
If I hard-code in parameters, I can successfully run the function as such from Oracle SQL Developer:
SELECT PAYLINETOT('2324', '111', to_date('01-Sep-2010'), to_date('31-Oct-2010'))
FROM DUAL;
But I still get the same error if I enter this in the calculation dialog in Discoverer:
PAYLINETOT('2324', '111', to_date('01-Sep-2010'), to_date('31-Oct-2010'))
Any idea what's going on and how to get this to work?

Michael,
I tried your suggestion, and this time I got a different error message that said that the function had not been registered with the EUL. I thought I had registered it, but when I checked, the return data type was wrong. I corrected it, and the function is "valid" in Discoverer Admin. Yet, when I go back to Discoverer Plus and attempt to use the function (and yes, I logged out and logged back in), I get the same error message:
"Error in formula - unexpected end of formula - Error: Function PAYLINETOT has not been registered with the EUL."
Any idea where the disconnect is? Are these two separate errors? How could Discoverer Admin tell me that the function is registered and Discoverer Plus tell me otherwise? And yes, I've made sure that the "Available in Desktop/Plus" checkbox is checked.

Error in User defined function for dynamic file naming

Hi,
While creating User Defined function with this following code for dynamic fieldname
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
which options should i select for cache Value, Context, Queue
for Augument , what name shd i mention.
Regards,
Varun

Hi Varun,
I guess I have answered a similar question just a few minutes before on very similar post from you. Just pasting the same here .................
Are you trying to access the ASMA values from the SOAP header of the XI message for the source file name?
First of all you need to Set the Sender File Adapter for Set ASMA and then file name. So it will work fine when you actually run the scenario end to end.
But in the mapping tool when you test the mapping - there is not message header updated with the actual source filename - and whenever you try to read the FileName attribute in the message header from the UDF - it cannot find the object and returns a NullPointerException.
I would suuggest for your mapping tool testing to be successful, have a check in the java code for null values,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
If (ourSourceFileName != null)
Return ourSourceFileName;
Return "NoFileName.txt";
Let us know if this works.
Regards,
Suddha

Error in User defined function for jdbc lookup

I am getting th error as follows "Method TestJDBCAPI$ with 2 arguments not found in class com.sap.xi.tf._JLU_MM_" when i a m testing in message mapping

//write your code here
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
//Build the Query String
Query = "Select role from login where username = " + username[0] + " and password = " + password[0] ;
try{
//Determine a channel as created in the configuration
channel = LookupService.getChannel("JLU_BUSS","JLU_chan");
// Get a system accessor for a channel.As the call is being made to the database an database accessor is obtained.
accessor = LookupService.getDataBaseAccessor(channel);
// Execute the Query and get the values in the resultSet.
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();)
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("role"));
catch(Exception ex){
result.addValue(ex.getMessage());
Above is my udf.My logic is that for the given username and password it should select the corresponding role from the database.

Need user define function for the message mapping structure

Hi All
I am new to XI.I need the java code for Udf for the following structure.
i have two input and one out put as error.
order_nos----
user define function-------error message
order_details----
num of orders---- i.e. 10
order_details------ i.e. whole order records details
1.i have to compare the 1st input with 2nd one means if the ist input contain 10 means there are 10 orders in 2nd input.if not then i have to give error message .
2.then i have to check the fields in 2nd input has no null values.if no values the output will be error message.
Edited by: Rohit Kumar on Dec 18, 2008 4:43 PM

Hi Sudhir
thanks for your continues help.i need some help so that i can fulfill my requirmrnt
this is my message mapping xml.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:methodCall_MT xmlns:ns0="http://www.dfdsf">
<num_orders>10</num_orders>
<test_mode />
- <order_x> ( which is order details)
<order_id>t78tyu8t</order_id>
<order_date />
<mfg_id />
<catalog_id />
<first_name />
<last_name />
<recipient />
<message />
<address1 />
<address2 />
<address3 />
<city />
<state />
<zip />
<country />
<country_code />
<phone />
<subtotal />
<tax />
<shipping />
<total />
<shopatron_total />
<fulfiller_total />
<shipment_id />
- <additional_info>
<in_store_pickup />
- <express_shipping>
<express_shipping_flag />
<express_shipping_text />
<express_shipping_arrival />
</express_shipping>
</additional_info>
- <discount>
<discount_description />
<discount_percentage />
<discount_total />
</discount>
<lang_id />
<currency_id />
<packing_list />
<num_items />
- <items>
<item_id />
<quantity />
<price />
<part_number />
<fulfiller_total />
<shopatron_total />
- <options>
<option_x />
</options>
</items>
</order_x>
</ns0:methodCall_MT>
this my mapping where under one element number elements are there.when i am excuting the code to check the null value its always giving the there is null val but i have filled evrything.its due to first its checking the order_x and which will be always null.uder this all data will be filled.please suggest what to change in the udf.the code given by u is working fine but its failing in this scenario because it getting the parent filed is null.

Error in conditional map using User Defined Function

All,
In my mapping I basically have a user defined function that returns the filename of my inbound file from the adapter-specific message attributes (file adapter). I know this is coded properly because if I simply assign this function to my destination field I can see the filename in the payload XML.
However if I conditionally check that returned value using if,then,else I get an error message stating:
"During the application mapping com/sap/xi/tf/_MaterialData2ZcustProdMastMulti_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
Essentially in my if I'm checking if the value returned by my user defined function is equal to the constant "SOMECONSTANT" then I'm setting my destination field to some other constant value. Otherwise it's equal to a different constant value.
Any thoughts?

Claus,
Thanks for the help. I actually had figured the problem out on my own. Sorry for not updating the thread sooner. What happened was this (as I suspected it wasn't related to my user defined function). For the newbies out there (of which I'm one) the problem was I was comparing strings in the graphical mapping tool using the Boolean "EQUALS" rather than the Text "EQUALSS".
Can you give yourself points for solving

How to resolve the error while using user defined function.

EPN Assembly file
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="TestEvent">
               <wlevs:class>com.bea.wlevs.event.example.FunctionCEP.TestEvent</wlevs:class>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <wlevs:adapter id="InputAdapter"
          class="com.bea.wlevs.adapter.example.FunctionCEP.InputAdapter">
          <wlevs:listener ref="inputStream" />
     </wlevs:adapter>
     <wlevs:channel id="inputStream" event-type="TestEvent">
          <wlevs:listener ref="processor" />
     </wlevs:channel>
     <wlevs:processor id="processor">
          <wlevs:listener ref="outputStream" />
          <wlevs:function function-name="sum_fxn" exec-method="execute">
          <bean>com.bea.wlevs.example.FunctionCEP.TestFunction</bean>
          </wlevs:function>
     </wlevs:processor>
     <wlevs:channel id="outputStream" event-type="TestEvent">
          <wlevs:listener ref="bean" />
     </wlevs:channel>
     <bean id="bean" class="com.bea.wlevs.example.FunctionCEP.OutputBean">
     </bean>
</beans>
Event class
package com.bea.wlevs.event.example.FunctionCEP;
public class TestEvent {
     private int num_1;
     private int num_2;
     private int sum_num;
     public int getSum_num() {
          return sum_num;
     public void setSum_num(int sumNum) {
          sum_num = sumNum;
     public int getNum_1() {
          return num_1;
     public void setNum_1(int num_1) {
          this.num_1 = num_1;
     public int getNum_2() {
          return num_2;
     public void setNum_2(int num_2) {
          this.num_2 = num_2;
Adapter class
package com.bea.wlevs.adapter.example.FunctionCEP;
import com.bea.wlevs.ede.api.RunnableBean;
import com.bea.wlevs.ede.api.StreamSender;
import com.bea.wlevs.ede.api.StreamSource;
import com.bea.wlevs.event.example.FunctionCEP.TestEvent;
public class InputAdapter implements RunnableBean, StreamSource {
private StreamSender eventSender;
public InputAdapter() {
super();
public void run() {
     generateMessage();
private void generateMessage() {
     TestEvent event = new TestEvent();
     event.setNum_1(10);
     event.setNum_2(20);
     eventSender.sendInsertEvent(event);
public void setEventSender(StreamSender sender) {
eventSender = sender;
public synchronized void suspend() {
Output Bean class
package com.bea.wlevs.example.FunctionCEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.FunctionCEP.TestEvent;
import com.bea.wlevs.util.Service;
public class OutputBean implements StreamSink {
     public void onInsertEvent(Object event) {
          System.out.println("In Output Bean");
          TestEvent event1 = new TestEvent();
          System.out.println("Num_1 is :: " + event1.getNum_1());
          System.out.println("Num_2 is :: " +event1.getNum_2());
          System.out.println("Sum of the numbers is :: " +event1.getSum_num());
Function Class
package com.bea.wlevs.example.FunctionCEP;
public class TestFunction {
     public Object execute(int num_1, int num_2)
          return (num_1 + num_2);
config.xml file
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
     <processor>
          <name>processor</name>
               <rules>
               <view id="v1" schema="num_1 num_2">
                    <![CDATA[
                         select num_1, num_2 from inputStream
                    ]]>
               </view>
               <view id="v2" schema="num_1 num_2">
               <![CDATA[
               select sum_fxn(num_1,num_2), num_2 from inputStream // I am getting error when i am trying to call this function
               ]]>
               </view>
               <query id="q1">
                    <![CDATA[
                         select from v2[now] as num_2*     // Showing error while accessing the view also               ]]>
               </query>
          </rules>
     </processor>
</wlevs:config>
Error I am getting is :
Invalid statement: "select >>sum_fxn<<(num_1,num_2),age from inputStream"
Description: Invalid call to function or constructor: sum_fxn
Cause: Probable causes are: Function name sum_fxn(int,int) provided is invalid, or arguments are of
the wrong type., or Error while handling member access to complex type. Constructor sum_fxn of type
sum_fxn not found. or Probable causes are: Function name sum_fxn(int,int) provided is invalid, or
arguments are of the wrong type., or Error while handling member access to complex type.
Constructor sum_fxn of type sum_fxn not found.
Action: Verify function or constructor for complex type exists, is not ambiguous, and has the correct
number of parameters.
I have made a user defined function in a java class and configured this function in the EPN assembly file under the processor tag.
But when i am trying to access the function in the config.xml file , it is giving me an error in the query.
Please provide urgent help that how to write the exact query.

Hi,
In the EPN Assembly file use
<bean class="com.bea.wlevs.example.FunctionCEP.TestFunction"/>
instead of
<bean>com.bea.wlevs.example.FunctionCEP.TestFunction</bean>
Best Regards,
Sandeep

Getting error while using user-defined function in transform activity

Hi
I designed one user-defined function to add 2 nos following the
link:http://docs.oracle.com/cd/E16764_01/integration.1111/e10224/bp_xslt_mpr.htm .
Under this i followed the portion creating user-defined function.
After deploying,i'm getting an error stating:"<summary>
An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload).
</summary>
<detail>
XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: oramds:/deployed-composites/PO/HelloWorld_rev1.0/xsl/Transformation_1.xsl<Line 6, Column 104>: XML-22045: (Error) Extension function error: Class not found '
Missing class: addition.add
can anybody help me in this regard
Thanks
Avinash

Did you copy the jar file of your java classes to MIDDLEWARE_Home/user_projects/domains/soa_domain/lib?
http://georgie-soablog.blogspot.com/2010/06/soasuite-11g-implement-user-defined.html
hope this helps

Error while using user defined function in reports

Hi,
When I use the below user defined function in oracle reports I got the wrong number of arguments error
select test_function(id,a_number,v_date-14,b_number) from dual;
If I remove -14 from the argument it works. But iIneed to subtract 14 days from the date.
Thanks for your help.

select test_function(id,a_number,v_date-14,b_number) from dual;
you have to give the command like this to_date(v_date,'dd-mon-yyyy')-14
because the v_Date you choose in the parameter form is not having the corrent date format
the format dd-mon-yyyy is the format in which v_date is passed by the user.

User Defined Function Error - Can't find function

Hi All,
Version: 11.1.1.4
I created a user defined function and added it to one of my BPEL Processes. I can see the function in JDeveloper and can compile the project without issue. We placed the jar file out on the SOA Server following the oracle user defined function examples. After placing the file out on weblogic I was able to successfully deploy the project.
Oracle Deployment Steps:
To deploy user-defined functions to runtime:
1. Copy the user-defined function JAR files to BEA_Home/user_projects/domains/domain_name/lib or a subdirectory of lib. Where domain_name is the name of the Oracle WebLogic Server domain (for example, soainfra).
2. Restart the Oracle WebLogic Server.However, when I try to run the composite application I get the below error. I am not really sure why it can't find the Function? The jar is out on the server and the jar was added to the project?
Error:
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is pnl:GetManager(string(bpws:getVariableData('inputVariable','payload','/client:process/client:input'))). The XPath expression failed to execute; the reason was: Function 'GetManager' not found.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>Any suggestions would be greatly appreciated!
Thanks,
S
Edited by: Scarpacci on Apr 1, 2011 6:06 AM

try putting the jar location explicitly in weblogic server's classpath i.e. add BEA_Home/user_projects/domains/domain_name/lib to wls classpath and restart server.

User defined function error

Hi All,
I was trying to create user defined function for raising exception if any mapping error occur according to the blog
"Throwing Smart Exceptions in XI Graphical Mapping" by Alessandro Guarneri
i have create the jar file and imported the classes but my udf is not able to resolve the method defined in the class.
Please help me in how should i import the jar correctly?

try putting the jar location explicitly in weblogic server's classpath i.e. add BEA_Home/user_projects/domains/domain_name/lib to wls classpath and restart server.

Error in simple user defined function

Hi all,
I have seen one simple user defined function on scenario. Now it is working fine. Same code I have used another place. But it is giving some errors
D:/usr/sap/C08/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapc6fa0c70297511dbaf7e00c09f4504e7/source/com/sap/xi/tf/_ST_MM_.java:3: package javax.mail.internet does not exist
import com.sap.aii.mappingtool.tf3.;import com.sap.aii.mappingtool.tf3.rt.;import java.util.;import java.io.; import java.lang.reflect.;import javax.mail.internet.;import javax.mail.;import java.util.;import java.util.Date;import javax.activation.;import java.lang.reflect.;import javax.mail.event.*;
Like that it has shown 13 errors. I have given the package names in imports field what previous function has.

Hi,
Please see this from SAP help
<i>a. You can import Java packages to your methods from the Imports input field, by specifying them separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since all message mappings require these packages and therefore import them. You should be able to access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the package under Import. In other words, you do not have to import it as an archive into the Integration Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as archives and that are located in the same, or in an underlying software component version as the message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards
Vijaya

User defined function in PI 7.1 compilation error "Recompile with -Xlint"

Hi All,
I have a user defined function in PI 7.1 .,which is throwing the following error.
Do i need to add any import statements like "import java.lang.String" in the beginning.
It is unable to recognize the String methods used in the user defined function.
E:\usr\sap\PID\DVEBMGS30\j2ee\cluster\server0\.\temp\classpath_resolver\Map02580a102a0911deb2b20019990eddfd\source\com\sap\xi\tf\_MM_C_to_Goods_.java:276:
cannot find symbol
symbol : method trim()
location: class java.lang.Object
if(container.getParameter("AdjustmentQuantity").trim().startsWith("-")){ ^
Note: E:\usr\sap\PID\DVEBMGS30\j2ee\cluster\server0\.\temp\classpath_resolver\Map02580a102a0911deb2b20019990eddfd\source\com\sap\xi\tf\_MM_C_to_Goods_.java
uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: E:\usr\sap\PID\DVEBMGS30\j2ee\cluster\server0\.\temp\classpath_resolver\Map02580a102a0911deb2b20019990eddfd\source\com\sap\xi\tf\_MM_C_to_Goods_.java
uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
Any Help greatly appreciated..
Collins

container.getParameter() returns Object, not String.
try following:
String aq = (String) container.getParameter("AdjustmentQuantity");
if(aq.trim().startsWith("-"))
Regards
Stefan

Error Using imported .JAR in user-defined function

Hi All,
I am trying to use jar files provided to me in user defined function as follows:
DataEncryption temp = new DataEncryption();
String ret = new String();
ret = temp.getEncryptedData(a);
return ret;
All jar files working perfectly in java software, But when i am trying to test the mappings by using above user-defined function.
I am catching the error and put in target field then, I am getting following message in target field:
"An error occured in getEncryptedData method : java.lang.SecurityException: The provider SunJCE may not be signed by a trusted party"
Please help in finding the error.
Regards

Rohan
Check if the XI Server JRE is the same as the client machine on which you have compiled your JAR.
1.4 has had this issue and i remember seeing it in a few forums.The problem should not occure in 1.5

In Ref cursor, user defined functions give "invalid column" error in EJB.

Hello,
I have written PL/SQL stored procedures/functions in Oracle 8i. They return the result set as a ref cursor.
These procedures are accessed by EJB (weblogic) using Type 4 (100% Java) JDBC Driver.
My problem is - if I use a user defined function to fetch a value in the select statement of the reference cursor, the EJB gives an error msg - invalid column name.
If instead of using the function I get the value directly from the table, it works fine. Refer the code below :
//In the PL/SQL function -
//instead of writing :
Open rc for
Select empcode, empname
from emp ;
//If I write :
Open rc for
Select empcode, mypack.getempname(empcode)
from emp ;
//getempname(empcode) is a function in
//in a package named 'mypack'
//and returns name for empcode.
//The java code gives error
//error : invalid column name
//While both are working fine and
//returning currect result in SQL Navigator.
Help me solve this mystery ?
Thanks in advance.
Swati.
null

Hi:
When use inline Function to simplify the SQL statements, there is one thing that one should conside--Purity Level.
if you create standalone stored pl/sql function. Oracle implicitly determines the PURITY level during compilation of the stored objects or at execution of an anonymous pl/sql block.
if you implement Package inline Function( in your case),unlike standalone stored pl/sql functions, the PL?SQL Engine does not determine the purity level of package functions. Therefore, you must explicity assign the correct purity levels for the function to be called inline.
the code like:
create or replace package mypack is
function getempname(empcode emp%empid%type)
return varchar2;
PRAGMA RESTRICT_REFERENCES(getempname,WNDS,WNPS,RNPS);
end mypack;
I think it can solve your problem if you use enough "pure"to be called inline function. Or you can create the standalone function to do it.
good luck!
Yali
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Swati Agrawal ([email protected]):
Hello,
I have written PL/SQL stored procedures/functions in Oracle 8i. They return the result set as a ref cursor.
These procedures are accessed by EJB (weblogic) using Type 4 (100% Java) JDBC Driver.
My problem is - if I use a user defined function to fetch a value in the select statement of the reference cursor, the EJB gives an error msg - invalid column name.
If instead of using the function I get the value directly from the table, it works fine. Refer the code below :
//In the PL/SQL function -
//instead of writing :
Open rc for
Select empcode, empname
from emp ;
//If I write :
Open rc for
Select empcode, mypack.getempname(empcode)
from emp ;
//getempname(empcode) is a function in
//in a package named 'mypack'
//and returns name for empcode.
//The java code gives error
//error : invalid column name
//While both are working fine and
//returning currect result in SQL Navigator.
Help me solve this mystery ?
Thanks in advance.
Swati.
<HR></BLOCKQUOTE>
null

Error in User defined function

Similar Messages

Maybe you are looking for