Error in using applications on Symbian (nokia e7) ...

+ many applications likd tweetian, Dabr, fascinate, twimgo etc have not been working on nokia e7 since 1st january 2014. what shall i do? Have even deleted & dn reinstalled but all in vain

HMNJ,
Most of the applications that you have mentioned requires QT runtimes. In order to obtain or update the QT version on your Nokia E7, please proceed to this page. If that doesn't fix the issue, please provide feedback so I can see what I can advise next.
Good luck

Similar Messages

Error when using Application Designer to logon

Good day experts,
I have just installed PeopleSoft 8.51 on the server, and have just configured the PSADMIN. When I tried to logon using Application Designer in 3-tier mode, I got an error as follows
"An error occurred on the application server within Tuxedo while returning the service GetCertificate. Cancel the current operation and retry. If the problem persists, contact your system administrator"
I have retraced my steps and it was installed as per the installation guide, and I cannot find any cases that address this issue.
Can someone shine some lights on this error?
Thank you very much in advance. Any help is highly appreciated.
Thank you
Mark

I have solved this issue. What's happened was that I was using Oracle Tuxedo 11gR1 which is not supported by PT8.51. Uninstalled 11gR1 and installed 10gR3, and everything is working fine now.

Excel VBA: Getting error 1004 using APPLICATION.RUN to run a macro

I'm getting a 1004 error when my ADDIN tries to launch a macro already in a workbook .
The macro resides in a workbook (on disk before it was opened in this session) and the addin opened the workbook, updated some data fields in spreasheets in the workbook and now is trying to cause the macro, already in that workbook, to execute as though
the user had opened the workbook, made the changes, and clicked the button connected to that macro. What the addin copied into the workbook was data in cells that the macro uses for inputs to its calcualtions.
The error reads: "The macro may not be available in this workbook or all macros may be disabled"
The command in question is in an ADDIN and its code is effectively:
v2="Taxplan Template 1.17.xlsm!SUMMARIZEYEAR
Application.run v2
...etc
Immediately upon executing "Application.run " it jumps to the on error location.
Taxplan Template 1.17.xlsm is open and accessible (the addin has just copied data into it and the macro is to update a summary based on that updated data) and it contains the macro Summarizeyear which has no arguments and is not private.
If I set a breakpoint in the addin right before the "Application.run", stop the addin and manually run the macro it works fine. It begins like:
Sub SummarizeYear()
Sheets("Summary").Select
...etc
If I manually open the workbook Taxplan Template 1.17 I can run the macro SUMMARIZEYEAR without issue.
Macros are enabled in Excel.
Probably not pertinent but I've used the same style of code with .xls workbooks in the past without a hitch, this is the first instance where I used it with .xlsm format workbooks.
Excel 2007 SP3
Thanks

I'm getting a 1004 error when my ADDIN tries to launch a macro already in a workbook .
The macro resides in a workbook (on disk before it was opened in this session) and the addin opened the workbook, updated some data fields in spreasheets in the workbook and now is trying to cause the macro, already in that workbook, to execute as though
the user had opened the workbook, made the changes, and clicked the button connected to that macro. What the addin copied into the workbook was data in cells that the macro uses for inputs to its calcualtions.
The error reads: "The macro may not be available in this workbook or all macros may be disabled"
The command in question is in an ADDIN and its code is effectively:
v2="Taxplan Template 1.17.xlsm!SUMMARIZEYEAR
Application.run v2
...etc
Immediately upon executing "Application.run " it jumps to the on error location.
Taxplan Template 1.17.xlsm is open and accessible (the addin has just copied data into it and the macro is to update a summary based on that updated data) and it contains the macro Summarizeyear which has no arguments and is not private.
If I set a breakpoint in the addin right before the "Application.run", stop the addin and manually run the macro it works fine. It begins like:
Sub SummarizeYear()
Sheets("Summary").Select
...etc
If I manually open the workbook Taxplan Template 1.17 I can run the macro SUMMARIZEYEAR without issue.
Macros are enabled in Excel.
Probably not pertinent but I've used the same style of code with .xls workbooks in the past without a hitch, this is the first instance where I used it with .xlsm format workbooks.
Excel 2007 SP3
Thanks
This line is not quite correct,
v2="Taxplan Template 1.17.xlsm!SUMMARIZEYEAR
it is missing the closing double quote, also since your file name contains a space, I would also enclose it in single quotes.

MBeanServer Error when using Application Server Connection

I am using Version 10.1.3.3.04157 of JDeveloper and Oracle Application Server 10.1.3.1.0.
When I try to test my "Application Server Connection" the following error occurs:
"Error while getting remote MBeanServer for url: ormi://localhost:6003/default:
Error reading application-client descriptor: Error communicating with server: Disconnected; nested exception is:
javax.naming.CommunicationException: Disconnected [Root exception is java.io.EOFException: Disconnected]"
Thanks!

Did you get any solution?
I am facing same problem.

Error when using Application Loader

When I try to upload my app to with the application loader I get this message:
In iTunes Connect, Newsstand is enabled for your app version. The Info.plist must include UINewsstandApp=true and a CFBundleIcons.UINewsstandIcon dictionary must be specified.
I'm submitting Multi-folio.
Please help guys!

What settings would that be specifically?

Error while using Recruitment application in ESS Portal

Hi Experts,
We are facing two issues when we are using recruitment application.
By this applicaton,the concerned can raise a requirement to the recruitment dept.
Some users are uanble to use the application.
After filling the data,some users are getting the error as "Unable to send E mail notification and can not complete action.This activity could not be read.
And another error of the application is after completion of enrtering details some users are getting the error message as " HR Requisition request successfully created with ID XXXXXXXXXX .Request is assigned to NULL.
Kindly help me out for the resolution of the issues.
Regards,
Sairam.

Hi Andy,
Thanks for the reply.
We are not using e-recruitment.
We have developed a portal application called Recruitment application.
By this user can raise the requirements in his deprtament and time to be filled.
E mails were already there in in communications infotype.
Please advice me to resolve the problem.
Regards,
sairam.

Error while using external service from application service

Hello All,
I have exposed webservice from a CAF project that i am importing as external service in another CAF project. Now i am using application service to directly call the external service. following is the code in my application service:
Ns6_getCountryByCode__R inp = new Ns6_getCountryByCode__R();
               inp.setNs6_countryCode(countryCode);
               try {
                      HRServicesWSVi__DocumentLocal bn = this.getHRServicesWSVi__Document();
                      Ns6_getCountryByCode__RResponse result = bn.getCountryByCode__R(inp);
                      retValue.setCountryCode(result.getNs6_Response().getNs3_countryCode());
                      retValue.setCountryName(result.getNs6_Response().getNs3_countryName());
                 }catch(Exception e){
                      throw new ServiceException(e);
I am getting the following error
ERROR. Problem in server response: [Bad Request].:
What could be the problem ? Thanks in advance
Regards,
Ashutosh Rastogi

Hello,
It's always a good idea to check the log file. In many cases you find hints what the reason for the error could be. The log file can be found here: <root>usrsap<SID>JC30j2eeclusterserver0logdefaultTrace.<xy>.trc where <root> is probably c:, SID something like F33, F41, ... and <xy> a number 0, 1, .... -> the highest number is the last and therefore most youngest log file. Please check out this file.
Another very common (but trivial) error is that you forgot to specify the URL and the end point location of your Web Service in CAF's config tool. This tutorial explains this beginning on page 20 <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11669cea-0c01-0010-63b2-b98c35b1b370">Using a Web Service as External Service</a>.
Regards,
Jan

VS 2006Error:error It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level.

hi - i had to restore from an older version of my application and i am receiving this error on build"
"error It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. 37 L:\Documents\Visual Studio
2005\WebSites\gmi\gmi\web.config"

Hi,
The forum supports VS setup and installation. I think your issue is not about the topic.
About the error message "This error can be caused by a virtual directory not being configured as an application in IIS",
I found some threads about it, please refer to these links.
http://stackoverflow.com/questions/1938730/virtual-directory-not-being-configured-as-an-application-in-iis
http://www.codeproject.com/Questions/107384/virtual-directory-not-being-configured-as-an-appli
If these can't help you, please post your issue to ASP.NET forum for better support.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21:     </httpHandlers>
Line 22:     <authentication mode="Forms">
Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24:     </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

Cannot submit AIR build using Application Loader to itunes connect ERROR ITMS-90125

I'm using IntelliJ and windows 8
I have tried AIR 1.5, 1.6, 1.7.
using -useLegacyAOT=yes
Below is the error when I try to submit my app to Itunes Connect using Application Loader
ERROR ITMS-90125: "The binary is invalid. The encryption info in the LC_ENCRYPTION_INFO load command is either missing or invalid, or the binary is already encrypted. This binary does not seem to have been built with Apple's linker."
http://i.imgur.com/oNJQllN.png
Tried several things I read on forums but there's no reply for this exact error.
What do I need to do? Please help me.
Thank you.

@Marian Majewski-Sliwa
We looked into the info.plist file which you had shared but there appears to be no issue with the same.
If possible, could you please PM the packaged IPA file, all 3 ANEs which you have used in your project to help us investigate the issue further?
Thanks,
Abhinav

"Error for COM routine using application program (return code 40,020)"

Dear All,
Working on 4.1
We are getting the below error while loading the Data into planning book...
"Time Series has to be updated"
After this we updated the storage bucket profile and the fiscal year varient calender.
And after this we are trying to initialize the planning area..but getting the below error...
"Error for COM routine using application program (return code 40,020)"
So then we try to run the LCM CON check , but here also we are getting the below log...
"Inconsistent time series initialization horizons"
We teasted all the above in TEST system , but we are not facing any issue.
Plz plz help us to resolve the same.
Regards,
Rajesh Patil

Hello Rajesh,
COM error 40,020 generally indicates that no Time Series exists for
the characteristic combination that is being loaded or saved.
In certain cases it could be related to missing Time Series for aggregates.
Therefore, performing a consistency check for the relevant planning area by running the program
/SAPAPO/TS_LCM_CONS_CHECK is usually the first option. You could also check the relevant planning
object structure and any aggregates using the programs /SAPAPO/TS_PSTRU_TOOL and /SAPAPO/TS_PSTRU_CONS_CHECK.
Additionally, please make sure that the time series exists for the horizon for which data is to be loaded. Should all these not resolve the issue, the problem will be resolved by deinitializing & reinitializing the time series.
Please note that deinitializing of the the planning area will lead to data loss, so please take the backup of your data before you
deinitialize the planning area.
Hope this helps.
Regards,
Ade

Error for COM routine using application program (return code 40069)

Hi,
In our planning book, sometimes, when we change a value and save, we are getting a pop up with the message "Error for COM routine using application program (return code 40069)". When we click ok, the value in that cell is reset to the previous value.
I initially thought this is due to duplicate CVCs and ran the consistency checks, /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_PSTRU_CONS_CHECK. I found few and corrected them. Now even after correcting them, I am still getting this COM error.
I could not find any SAP notes on this.
I switched on the SQL trace in ST05 and executed the same operation to get the COM error.
I noticed this part of the trace that is unusual and I am guessing that is what the system is doing when I get the error.
Can somebody please explain me the meaning of this attached trace?
http://spreadsheets.google.com/pub?key=pMjKR_3qLaxblBDDPfRt6cw
what does the SIM_SIMSESSION_CONTROL do?
Does CALL USER.SAPTS_AGGMULT_TIMESERIES mean there are duplicate time series?
Thanks.

I may not be technical person but may be the following thread on SIMSESSION may help.
SIM Session
ST05 trace only gives DB level traces. It would not give you traces of things happening in Live Cache since there are stored DB procedures that are called for LC activity.
Did you do OSS search on "return code 40069" ? CHeck OSS note 863244. See if it is applicable.

"Error for COM routine using application program (return code 1028514-)"

Hello Experts,
We have one issue in SAP SAP SCM 5.10.
When we are accessing the SNP Planing book, Now a days every often we are getting kicked out of the Planning book
with the error message "Error for COM routine using application program (return code 1028514-)"
How to rectify this,..Please advice /suggest
Regards,
Ramesh

Sorry, I copy the content as below:
Error -28514
Version Not Found
You attempted to access an OMS version, the liveCache infrastructure to store a Simulation Version, which does not exist (any longer).
On a productive system this error should only occur in exceptional situations because liveCache checks whether the simulation exists beforehand and returns an Error 17831 if this is not the case.
Reasons (=exceptional situation) for an error -28514 are:
a transactional simulation (Simulation Version) is older than liveCache parameter MaxRetentionTime (default: 8 hours). In this case, the OMS version (more precisely: the corresponding consistent view) can be deleted (asynchronously) by liveCache and an error -28514 will occur if the application tries to use the transactional simulation again.
a transactional simulation (Simulation Version) is older than liveCache parameter MinRetentionTime (default: 1 hour) and the data area usage exceeds 90%. In this case, the OMS version (more precisely: the corresponding consistent view) can be deleted (asynchronously) by liveCache and an error -28514 will occur if the application tries to use the simulation again.
If liveCache deletes an OMS version due to one of the reasons above, a corresponding notice can be found in liveCache's knlmsg file (cyclically overwritten!).
Error -28833
Error -28833 ("Consistent view has been cancelled") occurs instead of an error -28514, if the an OMS version is deleted while a parallel liveCache call is still using this OMS version.
Malfunction Test
If this error occurs during LCAPPS internal malfunction tests, it indicates that the preceeding provoked exception has not been handled correctly. During the handling of the provoked exception the OMS version is dropped automatically. As the malfunction test program catches the exception which would normally lead to a shortdump, it either has to recreate the current simulation in liveCache or to ensure that it is not used any more.
Error 17831 does not occur in this situation, because the keyed object representing the simulation (OMS version) is not deleted along with the version and can therefore still be accessed.
Best Regards,
Ada

Error for COM routine using application program (return code 40.301)

Hi All,
We are loading data in the DP book interactviely and then trying to Execute the Update Quantity button. The error message given is "Error for COM routine using application program (return code 40.301)".
We are on APO 5.0 and have the highest Support Pack of SAPKY50011.
I have searched in the SAP notes and one note 1050350 talks about a similar issue however the corrections mentioned are already there in our system and there the desired SP is SAPKY50010.
Can anyone tell what could be the reason for such error and how to resolve the same.
Thanks
Harsh

Hi Senthil / Vijaya,
Thanks for your prompt response.
Well first responding to Senthil
- Issue is not reproducable in Dev or Q systems.
- How to check the application logs during the time of errors
- Yes I have checked system locks they are clear
- We have run OM 17 and TS consistency checks but still the error persists.
I will go through the notes refered by you and see if it is of help.
Vijaya
- Yes you are Correct that for the related keyfigures the tick "No Negative stocks is there" also the tick for Fixed Values is also there. But the concern is that it was running fine earlier with the same settings.
To give you more inputs perhaps this is being run with the Sales Order History and the key figure which is in consideration is a Sales Override.If it is the negative values that are causing the problem they how can we avoid that figures?
Looking forward from hearing from you guys
Thanks,
Harsh

Error for COM routine using application program (return code 40,134)

Hi,
I am facing Error while loading P-book
Error for COM routine using application program (return code 40,134)
My system details are
SC2 system is SCM 7.0 and support pack SAPKY70002
i have checked following thing before posting it but dint helped.
1) SAP Notes 863244, 944254 -Not relevant to my system.
2) Checked Livecache performance.
3) Checked application logs during the time of error
4) Carry out livecache inconsistency check and check any errors.
let me know your expert views on this.
Regards.
Sandeep K.
Edited by: khaire sandeep on Jul 27, 2009 4:21 PM

Hi Sandeep,
If you have de-intialised the planning area and intialised agian the com routine errors will be washed out, but still it is surprising.
i guess this is something with the version that we are using in the planning area should have some issues.
i prefer you to run the re-oraganisation check for the vesion if not done earlier.
/SAPAPO/TSLCREORG - Check LiveCache Time Series Data
And please dont look at the issue only at planning area level, pls explore your circumstances at the whole planning areas and commom objects like Storage bucket profiles.
Yarala

Error in using applications on Symbian (nokia e7) ...

Similar Messages

Maybe you are looking for