Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385.  The .NET framework version is 4.0.30319.  I've setup an application pool and copied the wwwroot directory. 
I've checked for nested web.config files and I've been reading a lot about converting the site to an application.  The older server running the application is still up and running and the configurations look identical.  If I convert the site to an
application the icon changes and doesn't look like it does on the old server.  I'm new and still learning the basics of programming and publishing applications.  Can someone point me in the right direction?  I've been on google for a few days
to no avail.  Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level.  This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21:     </httpHandlers>
Line 22:     <authentication mode="Forms">
Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24:     </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

Similar Messages

  • VS 2006Error:error It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level.

    hi - i had to restore from an older version of my application and i am receiving this error on build"
    "error It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level.  This error can be caused by a virtual directory not being configured as an application in IIS. 37  L:\Documents\Visual Studio
    2005\WebSites\gmi\gmi\web.config"

    Hi,
    The forum supports VS setup and installation. I think your issue is not about the topic.
    About the error message "This error can be caused by a virtual directory not being configured as an application in IIS",
    I found some threads about it, please refer to these links.
    http://stackoverflow.com/questions/1938730/virtual-directory-not-being-configured-as-an-application-in-iis
    http://www.codeproject.com/Questions/107384/virtual-directory-not-being-configured-as-an-appli
    If these can't help you, please post your issue to ASP.NET forum for better support.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I am getting an error message that indicates /system/library/extensions/OnUSBMassStorage.kext was installed improperly.  How do I fix this?

    I am getting an error message that indicates /system/library/extensions/OnUSBMassStorage.kext was installed improperly.  How do I fix this?

    First off, you are running an intel not a PPC.
    Second have you attached a USB external drive to your computer?  Remove all peripherals and see if the message goes away.  Then reattach each peripheral one by one to weed out the problematic one.

  • I cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to th

    II cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. Trying to instantiate UID U4691 but lastAllocatedUID is only: 4491 OK"
    I am very frustrated because Muse crashes when cannot download updatres.
    I have been redirected to this forum from the 'Adobe Chat Team'
    I am trying to complete a project for a client, this is the second time I have asked for help. Can anyone please help me I
    I am using Windows 7. I am not sure if a response will come. I am new to forums. Do I wait or will someone contact me?
    Deb Kelleher
    [email protected]

    Hi Deb,
    Please accept my apologies for the inconvenience so far.
    I am not sure if you already tried this, but in case not, try to update Muse via Creative cloud directly.
    Start creative cloud application manager, if you dont have it, you can download it from here,
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Login using your adobe id, once you are in, switch to Apps, and you should see the Update for Muse, click Update.
    Let me know if you get any error or warning.
    Thanks.

  • While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

    While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

    The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
    Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
    If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
    Good luck,
    Clinton

  • I'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

    i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

    In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application.  If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work. 
    So, fire up Internet Explorer
    Go here: http://get.adobe.com/flashplayer/
    Follow the prompts, and then re-launch the application after you've completed the installation in IE.  Hopefully that sorts it out for you.

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

    I can't open my Itunes keep receiving error message- The iTunes Library.itl file  cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

    Anyone can help to advice how to solve this issue ?

  • HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and  now im getting the error message as "PDP authentication failure" Im using Aircel carrier.

    HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and  now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
    Please let me know how to fix this issue

    update...
    I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
    Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
    I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
    At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
    Frustrated.

  • IPOD ERROR MESSAGE:   Connect to your computer. Use Itunes to restore.

    Whenever I turn my ipod on after its been off for a few hours the screen displays "Connect to your computer. Use Itunes to restore" and then goes blank. I turn the ipod back on again and it appears to work normally but the battery is showing close to zero even though it has been freshly charged!
    I have restored the ipod several times as it suggests but this does not get rid of the error message. Is my ipod screwed? I'm surprised there are very few posts on this topic too...
    I have a 30Gb ipod video running v1.2.1

    I just found this support document which explains the issue exactly.
    http://docs.info.apple.com/article.html?artnum=303915
    Looks like a visit to Regent St is needed.
    The reason why I am surprised about the lack of posts on this topic is that I can't believe my issue is so unique. Surely out of the millions of ipod users out there this exact same issue would have been reported more frequently.

  • Error message when compiling book "file is corrupt" referring to a photo.  Or "cannot find original photo".  Can you use photos that have been "edited" out of "Book Mode"?

    Error message when compiling book "file is corrupt" referring to a photo.  Or "cannot find original photo".  Can you use photos that have been "edited" out of "Book Mode"?

    I did copy it to my desktop, but it still won't let me open it.  I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go.  I was able to verify the disc, but that's about it.  My husband tried it on his iMac and we have the same issue.  It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking.  It just keeps saying the same message as I posted above.  I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes.  It's been too frustrating trying to open this folder on this cd she gave me.  She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
    Cheers
    Guy

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

Maybe you are looking for

  • Text select tool not working properly

    When I use the text select tool, it selects columns, not words in a row, which is what I want. It used to work correctly. I am using Acrobat Pro, version 9.0.0. I tried adding the ALT key, with no good result.

  • N97 and Home Media

    Anyone found where Home Media is in the N97 ? I'm need it to browse and access PC based media the way I did with my N95.  Thanks Nokia 808 Nokia CK-200

  • Quicktime wont play anything

    I recently downloaded a .mov file and it played fine, but now quicktime suddenly stopped playing it. I double click on the file and it takes a while for quicktime to even open and when it finally does it wont play the file. It opens and the movie fil

  • Photoshop CS6 keeps flickering!

    Hi, I have recently fired up Photoshop CS6, I've not owned it for that long, it was purchased with the intention to upload some design work to my website. This is the issue that I'm encountering, brushes in Photoshop CS6 make my screen flicker in the

  • Why i can not get the quantity via BAPI_MATERIAL_AVAILABILITY ?

    Hi Experts , I had wrote an abap/4 program to invoke BAPI_MATERIAL_AVAILABILITY this BAPI . But i found the result that the aty-quantity in every storage location is the same .. ... Is it something wrong with my Code or Something missing in SD custom