Error in XPath 2.0 expression

Hi everybody,
I am using XMLSPY to test a XPath expression:
<xsl:value-of select="fn:tokenize('a b c', '\s')"></xsl:value-of>
But I get the error:
"This file is not valid:
Error in XPath 2.0 expression"
Any ideas?
Thanks, regards
Mario

http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
Using substring in the XPATH expression for Receiver Determination

Similar Messages

Unknown Error in XPath?!

Hi.
I've been trying to use javax.xml.xpath.XPath to get a Node from a DOMSource. But with event the absolute simplest XPath expression //StaticComponent I get the following exception.
Here's the code I'm using:
XPath path = XPathFactory.newInstance().newXPath();
Node newnode = (NodeList) path.evaluate("//StaticComponent", source, XPathConstants.NODESET);(source is defined elsewhere in the program, and I am SURE that it is properly defined, because I use it for something else in the program too.)
The exception I get tells me NOTHING, and I can't why a simple expression won't evaluate. Has anybody run into this before?
javax.xml.transform.TransformerException: Unknown error in XPath.
     at com.sun.org.apache.xpath.internal.XPath.execute(XPath.java:363)
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.eval(XPathImpl.java:213)
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.evaluate(XPathImpl.java:275)
     at ca.nrc.imti.dmdc.wiseshopfloor.editor.EditorModel$2.tableChanged(EditorModel.java:408)
     at javax.swing.table.AbstractTableModel.fireTableChanged(AbstractTableModel.java:280)
     at javax.swing.table.AbstractTableModel.fireTableCellUpdated(AbstractTableModel.java:259)
     at javax.swing.JTable$1.setValueAt(JTable.java:417)
     at javax.swing.JTable.setValueAt(JTable.java:1783)
     at javax.swing.JTable.editingStopped(JTable.java:3129)
     at javax.swing.AbstractCellEditor.fireEditingStopped(AbstractCellEditor.java:124)
     at javax.swing.DefaultCellEditor$EditorDelegate.stopCellEditing(DefaultCellEditor.java:328)
     at javax.swing.DefaultCellEditor.stopCellEditing(DefaultCellEditor.java:213)
     at javax.swing.JTable$GenericEditor.stopCellEditing(JTable.java:3460)
     at javax.swing.plaf.basic.BasicTableUI$NavigationalAction.actionPerformed(BasicTableUI.java:154)
     at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1512)
     at javax.swing.JComponent.processKeyBinding(JComponent.java:2435)
     at javax.swing.JTable.processKeyBinding(JTable.java:3254)
     at javax.swing.JComponent.processKeyBindings(JComponent.java:2481)
     at javax.swing.JComponent.processKeyEvent(JComponent.java:2398)
     at java.awt.Component.processEvent(Component.java:4902)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3598)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1688)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:593)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:765)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:698)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:559)
     at java.awt.Component.dispatchEventImpl(Component.java:3468)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Caused by: java.lang.NullPointerException
     at com.sun.org.apache.xpath.internal.axes.DescendantIterator.setRoot(DescendantIterator.java:261)
     at com.sun.org.apache.xpath.internal.axes.NodeSequence.setRoot(NodeSequence.java:213)
     at com.sun.org.apache.xpath.internal.axes.LocPathIterator.execute(LocPathIterator.java:210)
     at com.sun.org.apache.xpath.internal.XPath.execute(XPath.java:335)
     ... 37 more
java.lang.NullPointerException
     at com.sun.org.apache.xpath.internal.axes.DescendantIterator.setRoot(DescendantIterator.java:261)
     at com.sun.org.apache.xpath.internal.axes.NodeSequence.setRoot(NodeSequence.java:213)
     at com.sun.org.apache.xpath.internal.axes.LocPathIterator.execute(LocPathIterator.java:210)
     at com.sun.org.apache.xpath.internal.XPath.execute(XPath.java:335)
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.eval(XPathImpl.java:213)
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.evaluate(XPathImpl.java:275)
     at ca.nrc.imti.dmdc.wiseshopfloor.editor.EditorModel$2.tableChanged(EditorModel.java:408)
     at javax.swing.table.AbstractTableModel.fireTableChanged(AbstractTableModel.java:280)
     at javax.swing.table.AbstractTableModel.fireTableCellUpdated(AbstractTableModel.java:259)
     at javax.swing.JTable$1.setValueAt(JTable.java:417)
     at javax.swing.JTable.setValueAt(JTable.java:1783)
     at javax.swing.JTable.editingStopped(JTable.java:3129)
     at javax.swing.AbstractCellEditor.fireEditingStopped(AbstractCellEditor.java:124)
     at javax.swing.DefaultCellEditor$EditorDelegate.stopCellEditing(DefaultCellEditor.java:328)
     at javax.swing.DefaultCellEditor.stopCellEditing(DefaultCellEditor.java:213)
     at javax.swing.JTable$GenericEditor.stopCellEditing(JTable.java:3460)
     at javax.swing.plaf.basic.BasicTableUI$NavigationalAction.actionPerformed(BasicTableUI.java:154)
     at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1512)
     at javax.swing.JComponent.processKeyBinding(JComponent.java:2435)
     at javax.swing.JTable.processKeyBinding(JTable.java:3254)
     at javax.swing.JComponent.processKeyBindings(JComponent.java:2481)
     at javax.swing.JComponent.processKeyEvent(JComponent.java:2398)
     at java.awt.Component.processEvent(Component.java:4902)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3598)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1688)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:593)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:765)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:698)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:559)
     at java.awt.Component.dispatchEventImpl(Component.java:3468)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
--------------- linked to ------------------
javax.xml.xpath.XPathExpressionException
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.evaluate(XPathImpl.java:289)
     at ca.nrc.imti.dmdc.wiseshopfloor.editor.EditorModel$2.tableChanged(EditorModel.java:408)
     at javax.swing.table.AbstractTableModel.fireTableChanged(AbstractTableModel.java:280)
     at javax.swing.table.AbstractTableModel.fireTableCellUpdated(AbstractTableModel.java:259)
     at javax.swing.JTable$1.setValueAt(JTable.java:417)
     at javax.swing.JTable.setValueAt(JTable.java:1783)
     at javax.swing.JTable.editingStopped(JTable.java:3129)
     at javax.swing.AbstractCellEditor.fireEditingStopped(AbstractCellEditor.java:124)
     at javax.swing.DefaultCellEditor$EditorDelegate.stopCellEditing(DefaultCellEditor.java:328)
     at javax.swing.DefaultCellEditor.stopCellEditing(DefaultCellEditor.java:213)
     at javax.swing.JTable$GenericEditor.stopCellEditing(JTable.java:3460)
     at javax.swing.plaf.basic.BasicTableUI$NavigationalAction.actionPerformed(BasicTableUI.java:154)
     at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1512)
     at javax.swing.JComponent.processKeyBinding(JComponent.java:2435)
     at javax.swing.JTable.processKeyBinding(JTable.java:3254)
     at javax.swing.JComponent.processKeyBindings(JComponent.java:2481)
     at javax.swing.JComponent.processKeyEvent(JComponent.java:2398)
     at java.awt.Component.processEvent(Component.java:4902)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3598)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1688)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:593)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:765)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:698)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:559)
     at java.awt.Component.dispatchEventImpl(Component.java:3468)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Caused by: javax.xml.transform.TransformerException: Unknown error in XPath.
     at com.sun.org.apache.xpath.internal.XPath.execute(XPath.java:363)
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.eval(XPathImpl.java:213)
     at com.sun.org.apache.xpath.internal.jaxp.XPathImpl.evaluate(XPathImpl.java:275)
     ... 35 more
Caused by: java.lang.NullPointerException
     at com.sun.org.apache.xpath.internal.axes.DescendantIterator.setRoot(DescendantIterator.java:261)
     at com.sun.org.apache.xpath.internal.axes.NodeSequence.setRoot(NodeSequence.java:213)
     at com.sun.org.apache.xpath.internal.axes.LocPathIterator.execute(LocPathIterator.java:210)
     at com.sun.org.apache.xpath.internal.XPath.execute(XPath.java:335)
     ... 37 more
java.lang.NullPointerException
     at ca.nrc.imti.dmdc.wiseshopfloor.editor.EditorModel$2.tableChanged(EditorModel.java:414)
     at javax.swing.table.AbstractTableModel.fireTableChanged(AbstractTableModel.java:280)
     at javax.swing.table.AbstractTableModel.fireTableCellUpdated(AbstractTableModel.java:259)
     at javax.swing.JTable$1.setValueAt(JTable.java:417)
     at javax.swing.JTable.setValueAt(JTable.java:1783)
     at javax.swing.JTable.editingStopped(JTable.java:3129)
     at javax.swing.AbstractCellEditor.fireEditingStopped(AbstractCellEditor.java:124)
     at javax.swing.DefaultCellEditor$EditorDelegate.stopCellEditing(DefaultCellEditor.java:328)
     at javax.swing.DefaultCellEditor.stopCellEditing(DefaultCellEditor.java:213)
     at javax.swing.JTable$GenericEditor.stopCellEditing(JTable.java:3460)
     at javax.swing.plaf.basic.BasicTableUI$NavigationalAction.actionPerformed(BasicTableUI.java:154)
     at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1512)
     at javax.swing.JComponent.processKeyBinding(JComponent.java:2435)
     at javax.swing.JTable.processKeyBinding(JTable.java:3254)
     at javax.swing.JComponent.processKeyBindings(JComponent.java:2481)
     at javax.swing.JComponent.processKeyEvent(JComponent.java:2398)
     at java.awt.Component.processEvent(Component.java:4902)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3598)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1688)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:593)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:765)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:698)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:559)
     at java.awt.Component.dispatchEventImpl(Component.java:3468)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3439)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)

The root cause seems to be a NullPointerException,
but the line given is a line of comment in my
src.zip. Intriguing. What's your line 261 of
com.sun.org.apache.xpath.internal.axes.DescendantItera
tor?As far as I can tell, my jaxp libraries did not come with any source files, in a zip, jar or otherwise. At least, if it did, I can't find them.

XML-23002: (Error) internal xpath error while calling template

Hi,
I have used call-template named Chemloop in my xslt in the following way as attached in the xsl file. But when I am testing this xsl file through the bpel transformation, getting the error XML-23002: (Error) internal xpath error. Using this xslt I am converting a flat file into a xml file. My xslt except the call template part is working fine. Please suggest me if I m doing anything wrong.
XSLT:
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper 
<mapSources>
<source type="WSDL">
<schema location="../ReadASNNAEbizAlcanFileAdapter.wsdl"/>
<rootElement name="SynchAdvancedShipmentNotice" namespace="http://oracle.com/EbizGateway/NA/SynchASN/V2"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="../ReadASNNAEbizAlcanFileAdapter.wsdl"/>
<rootElement name="ShipNotice" namespace=""/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="2.0"
xmlns:svcdoc="http://xmlns.oracle.com/Services/Documentation/V1"
xmlns:aia="http://www.oracle.com/XSL/Transform/java/oracle.apps.aia.core.xpath.AIAFunctions"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:alcebo="http://oracle.com/EbizGateway/NA/SynchASN/V2"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:alcabcs="http://xmlns.oracle.com/pcbpel/adapter/file/T2FJAN/CreateASNNAEBIZAlcanProvABCSImpl/ReadASNNAEbizAlcanFileAdapter"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl pc alcebo plnk wsdl jca xsd alcabcs aia bpws xp20 bpel bpm ora socket mhdr oraext dvm hwf med ids xdk xref ldap">
<xsl:template match="/">
<ShipNotice>
<Header>
<BOLNo>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D1DP1_1000/alcebo:BILL_OF_LADING_1000"/>
</BOLNo>
<TripNo>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D1DP1_1000/alcebo:TRIP_NAME_1000"/>
</TripNo>
<Action>
<xsl:text disable-output-escaping="no"></xsl:text>
</Action>
<Attr1>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr1>
<Attr2>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr2>
<Attr3>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr3>
<Attr4>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr4>
<Attr5>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr5>
</Header>
<Shipment>
<ShipDate>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D1DP1_1000/alcebo:DEPARTURE_DATE_1000"/>
</ShipDate>
<RouteCode>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT4_1010"/>
</RouteCode>
<xsl:choose>
<xsl:when test='/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT1_1010 = "R"'>
<RateRouteCode>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT3_1010"/>
</RateRouteCode>
</xsl:when>
<xsl:otherwise>
<RateRouteCode>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT1_1010"/>
</RateRouteCode>
</xsl:otherwise>
</xsl:choose>
<xsl:choose>
<xsl:when test='/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT1_1010 = "R"'>
<CarrierCode>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT3_1010"/>
</CarrierCode>
</xsl:when>
<xsl:otherwise>
<CarrierCode>
<xsl:value-of select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT1_1010"/>
</CarrierCode>
</xsl:otherwise>
</xsl:choose>
<TransportModeCode>
<xsl:value-of select="substring(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT2_1010,1.0,1.0)"/>
</TransportModeCode>
<TransportModeType>
<xsl:value-of select="normalize-space(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:RTIN1_1030/alcebo:ROUTING_INSTRUCTIONS1_1030)"/>
</TransportModeType>
<xsl:choose>
<xsl:when test='normalize-space(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:SHIP_METHOD_CODE_EXT1_1010) = "R"'>
<TrailerNo>
<xsl:value-of select="concat(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:A1DL1_3600[1]/alcebo:DELIVERY_ATTRIBUTE1_3600,/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:A2DL2_3610[1]/alcebo:DELIVERY_ATTRIBUTE5_3610)"/>
</TrailerNo>
</xsl:when>
<xsl:otherwise>
<TrailerNo>
<xsl:value-of select="normalize-space(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:EQUIPMENT_NUMBER_1010)"/>
</TrailerNo>
</xsl:otherwise>
</xsl:choose>
<SealNo>
<xsl:value-of select="normalize-space(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D2DP2_1010[1]/alcebo:EQUIPMENT_SEAL_1010)"/>
</SealNo>
<Quantity>
<xsl:value-of select='sum(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:UnpackedOrder/alcebo:UnpackedItemDetail/alcebo:I3IT3_4520/alcebo:SHIPPED_QUANTITY_4520) + sum(format-number(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:UnpackedOrder/alcebo:P1PO1_4000/alcebo:FREIGHT_TERMS_CODE_EXT3_4000,"##############0.00"))'/>
</Quantity>
<QuantityUOM>
<xsl:value-of select="normalize-space(/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:D3DP3_1015[1]/alcebo:DELIVERY_TARE_WEIGHT_UOM_EXT1_1015)"/>
</QuantityUOM>
<Attr1>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr1>
<Attr2>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr2>
<Attr3>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr3>
<Attr4>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr4>
<Attr5>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr5>
<ShipmentItems>
<xsl:for-each select="/alcebo:SynchAdvancedShipmentNotice/alcebo:AdvanceShipmentNotice/alcebo:ASNShipmentLevel/alcebo:UnpackedOrder">
<ShipmentItem>
<ShipListNo>
<xsl:value-of select='concat(substring("0000",1.0,4.0 - string-length(string(position()))),string(position()))'/>
</ShipListNo>
<OrderNo>
<xsl:value-of select="normalize-space(alcebo:P1PO1_4000/alcebo:PURCHASE_ORDER_NUMBER_4000)"/>
</OrderNo>
<LineNo>
<xsl:value-of select="normalize-space(alcebo:UnpackedItemDetail/alcebo:I2IT2_4510[1]/alcebo:CUST_PO_LINE_NUM_4510)"/>
</LineNo>
<ItemNoXref>
<xsl:value-of select="normalize-space(alcebo:UnpackedItemDetail/alcebo:I1IT1_4500[1]/alcebo:BUYER_PART_NO_4500)"/>
</ItemNoXref>
<AlcoaPartNo>
<xsl:value-of select="normalize-space(alcebo:UnpackedItemDetail/alcebo:I1IT1_4500[1]/alcebo:SUPPLIER_PART_NUMBER_4500)"/>
</AlcoaPartNo>
<Quantity>
<xsl:value-of select="sum(alcebo:UnpackedItemDetail/alcebo:I3IT3_4520/alcebo:SHIPPED_QUANTITY_4520)"/>
</Quantity>
<QuantityUOM>
<xsl:value-of select="normalize-space(alcebo:UnpackedItemDetail/alcebo:I3IT3_4520[1]/alcebo:ORDER_QUANTITY_UOM_INT_4520)"/>
</QuantityUOM>
<TareWeight>
<xsl:value-of select='format-number(alcebo:P1PO1_4000/alcebo:FREIGHT_TERMS_CODE_EXT3_4000,"##############0.##")'/>
</TareWeight>
<TareWeightUOM>
<xsl:value-of select="normalize-space(alcebo:UnpackedItemDetail/alcebo:I3IT3_4520[1]/alcebo:ORDER_QUANTITY_UOM_INT_4520)"/>
</TareWeightUOM>
<Attr1>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr1>
<Attr2>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr2>
<Attr3>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr3>
<Attr4>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr4>
<Attr5>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr5>
<xsl:for-each select="alcebo:UnpackedItemDetail">
<Bundle>
<LotNo>
<xsl:value-of select="alcebo:DeliveryDetail/alcebo:LSDET_5500[1]/alcebo:LOT_NUMBER_5500"/>
</LotNo>
<SubLotNo>
<xsl:value-of select="alcebo:DeliveryDetail/alcebo:EX02_5591[1]/alcebo:DSNO_LEV06_EXT09_5591"/>
</SubLotNo>
<Quantity>
<xsl:value-of select="alcebo:I3IT3_4520[1]/alcebo:SHIPPED_QUANTITY_4520"/>
</Quantity>
<QuantityUOM>
<xsl:value-of select="alcebo:I3IT3_4520[1]/alcebo:ORDER_QUANTITY_UOM_INT_4520"/>
</QuantityUOM>
<Pieces>
<xsl:value-of select="alcebo:DeliveryDetail/alcebo:EX02_5591[1]/alcebo:DSNO_LEV06_EXT10_5591"/>
</Pieces>
<Attr1>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr1>
<Attr2>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr2>
<Attr3>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr3>
<Attr4>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr4>
<Attr5>
<xsl:text disable-output-escaping="no"></xsl:text>
</Attr5>

<xsl:call-template name="Chemloop">
<xsl:with-param name="i">1</xsl:with-param>
</xsl:call-template>
</Bundle>
</xsl:for-each>
</ShipmentItem>
</xsl:for-each>
</ShipmentItems>
</Shipment>
</ShipNotice>
</xsl:template>
<xsl:template name="Chemloop">
<xsl:param name="i"/>
<xsl:variable name="ChemRow"
select="concat(/alcebo:DeliveryDetail[position()]/alcebo:EX01_5590[1]/alcebo:DSNO_LEV06_EXT01_5590,/alcebo:DeliveryDetail[position()]/alcebo:EX01_5590[1]/alcebo:DSNO_LEV06_EXT02_5590,/alcebo:DeliveryDetail[position()]/alcebo:EX01_5590[1]/alcebo:DSNO_LEV06_EXT03_5590,/alcebo:DeliveryDetail[position()]/alcebo:EX01_5590[1]/alcebo:DSNO_LEV06_EXT04_5590)"/>
<xsl:variable name="ChemBlock"
select="substring($ChemRow,1+($i-1)*33,33)"/>
<xsl:if test="$ChemBlock!=' '">
<ChemicalAnalysis>
<ElementName>
<xsl:value-of select="substring($ChemBlock,1,5)"/>
</ElementName>
<RNDValue>
<xsl:value-of select="substring($ChemBlock,6,15)"/>
</RNDValue>
<ValueQualifier>
<xsl:value-of select="substring($ChemBlock,21,2)"/>
</ValueQualifier>
<NumDecimals>
<xsl:value-of select="substring($ChemBlock,23,3)"/>
</NumDecimals>
<DropNo>
<xsl:value-of select="substring($ChemBlock,26,8)"/>
</DropNo>
</ChemicalAnalysis>
</xsl:if>
<xsl:if test="($ChemBlock=' ') and $i=1">
<xsl:message terminate="yes">No Chemical data found</xsl:message>
</xsl:if>
<xsl:if test="$i <= 26">
<xsl:call-template name="Chemloop">
<xsl:with-param name="i">

<xsl:value-of select="$i + 1"/>
</xsl:with-param>
</xsl:call-template>
</xsl:if>
</xsl:template>
</xsl:stylesheet>

I can't get what are you trying to achieve by a construction like bellow...
/alcebo:DeliveryDetail[position()]
Remember XSLT is not a procedural language... a selector like /alcebo:DeliveryDetail[position() = $var] or just /alcebo:DeliveryDetail[$var] would make more sense...
Cheers,
Vlad

Syntax error (missing operator) in query expression works in sql

Hi guys,
I am having a problem with this query in Access 2007, it runs
fine in MSSQL.
I get this error when I run it.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression
'tbl_skuoption_rel.optn_rel_Option_ID = tbl_skuoptions.option_ID
INNER JOIN tbl_skus ON tbl_skuoption_rel.optn_rel_SKU_ID =
tbl_skus.SKU_ID INNER JOIN tbl_products AS p ON
tbl_skus.SKU_ProductID = p.product_ID'.

Access may require parenthesis ( ) around the JOINs when
joining more than two tables

Syntax error (missing operator) in query expression

Hi all
I am creating a couple of pages where a dynamic list is created from an access database and then products from that list are displayed, the user then has the option of clicking more details, this then should pass the KITID over to the details page, However when i click on the details page i get the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'KitID = Kit 01'.
/classicclocks/Kieninger_gallery.asp, line 21
Here is the code from the page i am building, can anybody see anything obvious here
strKitID = Request.QueryString("KitID")
' If KitID does not exist then redirect to Gallery page
If strKitID = False Then
Response.Redirect("kit_gallerytest.asp")
End If
' SQL Query for specific KitID details only
Dim objRS
Set objRS = Server.CreateObject ("ADODB.Recordset")
' Open new objRS
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = " & strKitID & " ORDER BY KitID"
objRS.Open strSQL, MM_dbConn_STRING,,,adCmdTable
' Get all rows from table and asign values to array for use in form
Do While Not(objRS.EOF)
Images = True
fsImagesArray = objRS.GetRows()
    Const arrKitID = 0
    Const arrImgKitCatalogue = 1
    Const arrKitDescriptionShort = 2
Loop
' Close objConn and objRS
objRS.Close
strSQL = "SELECT * From tblMovements WHERE KitID = " & strKitID
objRS.Open strSQL, MM_dbConn_STRING
thanks
John

String values in a SQL where clause must be wrapped in quotes. Try this:
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = '" & strKitID & "' ORDER BY KitID"

Syntax error on token "class", invalid Expression

Hai,
i am new to java beans and i have written the following code which gives an error
Code jsp:
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>beancode</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body>

Name: <input type="text" name ="nname"> <br><br><br>
Address: <input type="text" name ="naddress"> <br><br><br>
     <input type = "submit" value="Submit">
<% useBean id="sampl"; class="beancode.class"; scope="page"; %>
<% setProperty name="sampl"; property="*"; %>
<%--</jsp:useBean> --%>
<table border="1">
          <tr><td>S.NO</td><td>NAME</td><td width="95">ADDRESS</td></tr>
<%
          int count =1;
          while (rs.next())
     String name = rs.getString("Name");
          String address = rs.getString("ADDRESS");
%>
          <tr>
               <td>
<%
                    out.print(count);
%>               </td>
               <td>
<%                     out.println(name);
%>                </td>
               <td>
<%                     out.print(address);
                    count++;
%>               </td>
          </tr>
<%          }
%>
     </table>

</body>
</html>
JAVA Class code:
import java.sql.*;
* @author
public class beancode
private String employid;
private Connection con = null;
// private ResultSet rs = null;
private PreparedStatement st = null;
String name, address;
/** Creates a new instance of beancode */
public beancode()
{ok
try
          Class.forName("com.mysql.jdbc.Driver");
          String url = "jdbc:mysql://localhost:3306/test";
          Connection con =DriverManager.getConnection(url,"root","shasi");
          Statement s = con.createStatement();
          ResultSet rs = s.executeQuery ("Select * FROM Test");
catch(Exception e)
          System.out.println(e.getMessage());
public void setemployid(String nname,String naddress)
          name = nname;
          address = naddress;
     public String getemployid()
          return(name);
     public String getemployadd()
          return(address);
public void insert()
try
String s1="insert into samp values('"+name+"','"+address+"')";
st = con.prepareStatement(s1);
st.executeUpdate();
st.clearParameters();
st.close();
catch(Exception m)
     public static void main(String args[])
               beancode b = new beancode();
               b.insert();
The error
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 18 in the jsp file: /bean.jsp
Generated servlet error:
Syntax error on token "class", invalid Expression
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:397)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
PLEASE HELP ME OUT
I AM WAITING PLEASE
Thanks,
Shasi

You can try to use the xml form of tag use bean and not <% like this:
<jsp:useBean id="sampl" class="beancode" scope="page" />
<jsp:setProperty name="sampl"; property="*" />
and in the class attribute specify the fully qualified class name without the extension

Binding assignment is not available:Error in the evaluation of expression

Hi All,
I have created Workflow to send an Email using Requested Start date concept of a Task.This is for sending a E-mail to the customer when contract end date-60 Days.
I have done all Bindings and I am getting The date and time from BOR which I am using to triger an Event.
I am getting these type of Errors:
Source (expression '&BUS2000137.TIME&') of binding assignment is not available
Source (expression '&BUS2000137.DATE&') of binding assignment is not available
Error in the evaluation of expression '<???>&BUS2000137.DATE&' for item '1'
Unable to determine the value of component ''
Error in the evaluation of expression '<???>&BUS2000137.TIME&' for item '1'
Unable to determine the value of component ''
Looking for Inputs.
Regard's,
Lokesh

Hi Adrash/Rick,
Object type ZBS2000137
Attributes
ZBS2000137.Time    Time to send mail --> Is nothing but OBJECT-TIME = SY-UZEIT
ZBS2000137.Date    60 days before contract end date --> Is nothing but OBJECT-DATE = LS_APPOINTMENT-DATE_FROM - 60.
Methods
ZBS2000137.Method1       Sending Mail
Events
ZBS2000137.Released      Contract Line Item Released
ie I want to excute the task with same DATE and TIME, the same I have mentioned in "
Requested Strat Tab with Expression as below
Refer.date/time EXP Expression
Date &BUS2000137.DATE&     60 days before contract end date
Time &BUS2000137.TIME&      Time to send mail
Note: If I am testing the Workflow from T-code: SWUS it is working fine.
Regard's,
Lokesh.

Help Page Error: Using XPath expressions as list indexes and map keys

The help page says for maps to use the XPath expression
/process_data/mapvar[@id='/process_data/@stringvar']
But in reality for things to work you have to omit the quotations.

thanks a lot for your help..
there are total 162 records in the v$open_cursor for that user.
among that the open cursor is only 4 and open-recursive cursor is only 6 for that user.
in my session i am executing only the renaming of the constraints and nothing more.
When i have queried the v$open_cursor for cursor_type='OPEN' for all the users, then i got that it has exceeded the value of open_cursors parameter.
So how can i resolve that....

Result is empty error in XPath

Hi,
I am getting the following error coming from an "Assign" activity that copies from a child element of one variable (child of message type = M1) to another variable (which is of type element same as that of that child of M1).
I am consistently getting the following error :
"Error in evaluate <from> expression. The result is empty for the XPath expression .
<<from element name>> "
Does anyone know why ?
Thanks

That message usually occurs when you point to a non-existing child. When you're using child nodes, you'll have to make sure you're pointing to the right node, for example by using [position() = bpws.getVariableData('idx'), or using an XSLT with a 'for each'.
Post the variable definition and the assign here, if you need more input.
Hth,
Mike

Inline display of error message for a regular expression validation

Hi All,
I am using ApexLib in my application.
I am using regular expression validation for some of the items.
Those validation will happen when the button is pressed and the message will be displayed as per the error.
But, I want the errors to be displayed immediately when the focus is away from that item.
as we do for required items.
could anybody help me to achieve it?
Thanks in advance
bye
Srikavi

Hi Srikavi,
to achieve a Validation of an item when leaving the field you'll have to use some javascript code (as ApexLib does internally).
What do you need:
- onChange - Event on your Item
- some Javascript code which is called in the onChange Event (you can put this code either in your page html header or, if it is used more often in your application, in a seperate js File)
- call the ApexLib method apexlib.error.showError to display your error
I actually never tried it myself, but i'm pretty sure that this will work (according to what i've seen in the ApexLib code).
Have fun and tell us how it went,
Peter
Edited by: peter_raganitsch on Sep 5, 2008 11:56 AM

Error Installing SQL SERVER 2012 Express

Hello Everyone, i have this problem:
When i try to install SQL SERVER Express 2012 on Windows 7 Ultimate 64b, appears the error "Can't fin registry key (MSDTC)", i try to follow the instructions of other forums, but the file "msdtc.exe" not found in the computer.
Then i try to copy from other computer but only i have Windows 8, and doesn't Work (The copy).
Also I install SQL Server 2012, but the services doesn't start, I think it's for the same error, then I uninstall the SQL server Again.
I search in the net, but nobody reports the file "msdtc.exe" not exits in the OS, then I think, Ii have the unique computer that don't have the file????
Please somebody answer my question, where i could find the file msdtc.exe for download?, this file will fix the problem?
Sorry for my english.
Thank you all.

Could you please check if you have any service call "Distributed Transaction Coordinator" in services.msc
similar issue:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/77f3fd5b-9290-4455-bf8c-0abd58166f91/msdtc-on-windows-7?forum=sqldatabaseengine

Constant Error While Setting Up Airport Express with Existing Network

I just bought an Airport Express for use with printer and existing wireless network (two original Airport Extremes). I can't get past the error msg below*. The AE shows in Airport Utility. I click on that and then "Continue". A window appears asking if I'm sure I want to "Switch" wireless networks. I assume I do since set up doesn't continue if I select "Don't Switch". But every time I try that it shows a spinning wheel and "Joining wireless network...", and un-joins existing wireless network (losing the two AEBS's), giving me the continued error msg. And on a few occasions Airport Utility can't see it, like now.
*Error Msg: "An error occurred joining the selected wireless network."
It's been a while since I've set up Apple's wireless devices but I thought it was easier now. The manual is ambiguous with "1) Open Airport Utility, 2) Follow the onscreen instructions...". If I could only get to that. Very frustrating for a device that's suppose to be so simple to set up.
Message was edited by: Sakahara

Addendum: Now that I've plugged it in near the printer again Airport Utility can see it but can't read it's configuration so that I can set up the printer. How is this helpful with setting up a printer in another room/level if you have to set it up near your computer first because the two Airport Extreme's you have already set up (one of them, to create the wireless network, 8 feet away from the Express, and the other, to extend the wireless network, on an upper level, to reach the iMac) to give your computer a wireless network? So Airport Utility can see all three airport devices, the network/internet works and is extended to my iMac, but it can't read the Express device to set up the printer. Isn't that the point of the extended wireless network? And yet I can read/set up the Extreme near the Express. Now I have to lug the printer up two levels to set up the printer.

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

XML parser error; when XPath elements starts with "_"

Hi,
I have a problem in extracting elements from XML which is starting with "_". please check the queries below executed on Oracle 10g.
Query 1:
SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/_B') FROM DUAL;
Error starting at line 1 in command:
SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/_B') FROM DUAL
Error report:
SQL Error: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/A/_B'
31011. 00000 - "XML parsing failed"
*Cause:    XML parser returned an error while trying to parse the document.
*Action:   Check if the document to be parsed is valid.
Query 2:
SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/E') FROM DUAL;
EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/E')
4
Oracle version:
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Please let me know if there is any workaround for this.*
Thanks,
Veerababu Kanumilli.

Hi MichaelS,
- I have executed the queries provided by you, but I am not able to get the result in 10g when I am trying to access elements with "_" in XPath.
select * from v$version where rownum = 1;
select extractvalue (xmltype ('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'), '/A/_B') "_B" from dual;
select extractvalue (xmltype ('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'), '/A/E') "E" from dual;
Output:
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
Error starting at line 4 in command:
select extractvalue (xmltype ('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'), '/A/_B') "_B" from dual
Error report:
SQL Error: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/A/_B'
31011. 00000 - "XML parsing failed"
*Cause:    XML parser returned an error while trying to parse the document.
*Action:   Check if the document to be parsed is valid.
E
4
Thanks,
Veerababu Kanumilli

MOF Syntax Error Installing SQL Server 2014 Express

I am trying to install SQL Server 2014 Express With Tools on a fully updated Win 8.1 system having already installed Visual Studio Community 2013 with Update 4. During the installation of SQL Server, I am getting a "MOF Syntax Error".
I found this http://support.microsoft.com/kb/2387686 on the web but I can't see that that applies to me as I would have thought that any suggested fixes from this article would have been already installed
or corrected in Win 8.1 or SQL Server 2014. Neither do I know what fix I should install anyway.
An entry on this forum suggested that running Winmgmt /salvagerepository command fixed the problem. I ran the command in the Command Prompt and a /verifyrepository said it was consistent. However, the error still occurred when I installed SQL Server.
Can anyone help with this?

Hi wagham,
From your description, you encounter the error when installing SQL Server 2014 Express on Windows 8.1. For further analysis, please help to post the summary and detail logs which locate under
%ProgramFiles%\Microsoft SQL Server\120\Setup Bootstrap\Log. For more details about viewing SQL Server setup log files, you can refer to this
article.
Additionally, based on my research, “MOF Syntax Error” could be caused by various reasons, such as insufficient account permissions, corrupted .NET Framework and so on. There are some proposals for you installing SQL Server 2014 Express as follows.
1. Make sure that the account you use to install SQL Server has admin rights. If you are using a domain administrator, please ensure that it is added to local administrator group.
2. Make sure that you right-click the SQL Server setup file (setup.exe) and choose “Run as administrator” to complete the installation.
3. Check that if the .NET Framework is corrupted on your system. You can verify the installation state of the .NET Framework via the
.NET Framework Setup Verification Tool. If the .NET Framework is corrupted, please
repair it using
.NET Framework Repair Tool, then reinstall SQL Server.
Here is a similar blog about “MOF Syntax Error” for your reference.
http://sqlservertimes2.com/?p=641
Thanks,
Lydia Zhang

Error in XPath 2.0 expression

Similar Messages

Maybe you are looking for