Help Page Error: Using XPath expressions as list indexes and map keys
The help page says for maps to use the XPath expression
/process_data/mapvar[@id='/process_data/@stringvar']
But in reality for things to work you have to omit the quotations.
thanks a lot for your help..
there are total 162 records in the v$open_cursor for that user.
among that the open cursor is only 4 and open-recursive cursor is only 6 for that user.
in my session i am executing only the renaming of the constraints and nothing more.
When i have queried the v$open_cursor for cursor_type='OPEN' for all the users, then i got that it has exceeded the value of open_cursors parameter.
So how can i resolve that....
Similar Messages
-
Using xpath expressions in Document-Builder
Hi all
we have re-designed our (existing) DDX-templates with the Document Builder in LC Workbench. The DDX templates are used to assemble PDFs with LC Assembler-Service.
Now my question: Is it still possible to use XPath-expression in the DDX template? Please find our example below:
The XPath expression works only if we copy&paste the DDX source code directly to the Assembler-Service property view (picture below). But referring the DDX-template doens't interpret the xpath path at run time (2nd picture below). Any help on that will be appreciated!
Works (using DDX source code directly):
Doesn't work (using DDX template):Hi,
>
I tried to get a portion of an XML by using XPath Expressions as follows:
String xPathExpression =
"declare namespace xq='http://inti.notariado.org/indices' " +
"$this/xq:RULES/xq:RULE[@disabled]";
I think any XPath expressions which use [] are not supported in stand alone
version, but as this is not documented I could be wrong.
Regards
Arek -
i want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.
If you are talking about your Apple ID password, make sure it IS your apple ID.
In the past 24 hours, I have received two emails "How to reset your Apple ID password". I had not requested any change and I finally realized someone else is trying to reset the password. I have had this Apple ID since 2009 so I am not using someone else's ID.
Again, if you are not receiving the email to reset make sure you have the right ID - it might be going to the email linked to the account, and it might not be yours. -
Help! I used to upload photos via ios and it was always published up to my 5th photos, but on the 6th, it just go to ios photos album and was not published on my fb's timeline...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?
As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.
-
OWSM - Signing element using XPATH Expression
Hi,
We have a requirement to sign an element within outgoing body of xml message. We are trying to use the policy pipeline to sign.
Signed Content: XPATH
sign XPATH Expression: referencing the element required to be signed.
We get the error: WS-Security process failure:There are no parts of the message to sign
The error message indicates that the XPATH query is not correct. Does anyone know of a source of documentation for this where we can get examples. Tried google, forums...etc with no success. Any help would be really appreciated.
ThanksHi,
Managed to sort it, found the following link.
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b31008/toc.htm
Thanks -
Please Help - "page error" / a system error occurred
I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message Could not find the included template components/mix_documents2.cfm.
MissingFileName components/mix_documents2.cfm
StackTrace coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext Error - array
1 Error - struct
COLUMN 0
ID CFINCLUDE
LINE 15
RAW_TRACE at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE CFML
TagName CFINCLUDE
Type MissingIncludeWith LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using? -
Help in query using regular expression
HI,
I need a help to get the below output using regular expression query. Please help me.
SELECT REGEXP_SUBSTR ('PWRPKG(P/W+P/L+CC)', '[^+]+', 1, lvl) val, lvl
FROM DUAL,(SELECT LEVEL lvl FROM DUAL
CONNECT BY LEVEL <=(SELECT MAX ( LENGTH ('PWRPKG(P/W+P/L+CC)') - LENGTH (REPLACE ('PWRPKG(P/W+P/L+CC)','+',NULL))+ 1) FROM DUAL));
I need the output as
correct result:
==============
val lvl
P/W 1
P/L 2
CC 3
But i tried the above it is not coming the above result. Please help me where i did a mistake.
Thanks in advanceFrank gave you a solution in your other thread. You could simplify it if you are on 11g:
SQL> select * from table_x
2 /
TXT
TECHPKG(INTELLI CC+FRT SONAR)
PWRPKG(P/W+P/L+CC)
select txt,
regexp_substr(
txt,
'(.*\()*([^+)]+)',
1,
column_value,
null,
2
) element,
column_value element_number
from table_x,
table(
cast(
multiset(
select level
from dual
connect by level <= regexp_count(txt,'\+') + 1
as sys.OdciNumberList
order by rowid,
column_value
TXT ELEMENT ELEMENT_NUMBER
TECHPKG(INTELLI CC+FRT SONAR) INTELLI CC 1
TECHPKG(INTELLI CC+FRT SONAR) FRT SONAR 2
PWRPKG(P/W+P/L+CC) P/W 1
PWRPKG(P/W+P/L+CC) P/L 2
PWRPKG(P/W+P/L+CC) CC 3
SQL> SY. -
Using xpath-expressions inside Task Instructions
Hi all,
I have a process where I would like to build up the task Instructions in a string variable. However I cannot seem to resolve xpath values when I am putting my string as the task instruction.
How can I do this?
Thanks in advance
Sincerely
Kim ChristensenHi again Marcel - thanks for your quick reply
However I am not sure I und erstand your answer correctly.
I have a string variable (str_Inctructions) that I want to set as my Task Instruction.
So at a point in my process I create a set value with an expression like this:
str_Instructions = 'Here are some instructions for {$/process_data/myOtherVar$} please follow them.'
I then set str_Instructions as the Task Instructions (an xpath-expression). When I get the Task in Workspace I see the {$/process_data/myOthervariable$} instead of the value of myOtherVar.
So how can I get the value of myOtherVar? -
Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
How do I stop the "Better Privacy" help page coming up every time I open Firefox and while browsing?
The "Better Privacy" help page opens as a separate tab every time I open Firefox. I close it, but it keeps coming back, usually when I go to another site (by clicking a link or using a bookmark) and at seemingly random intervals while I'm browsing.
chrome://bprivacy/content/BetterPrivacy.html
I'm sure it's not malware, but it's driving me mad. Is there no way to block this annoyance?
I don't want to disable Better Privacy, but I'm often tempted to do so.
I'm using (Linux) Ubuntu 12.04, which comes with Firefox 18.0.2.Check the Home page setting:
*Edit > Preferences > General > Startup: Home page
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved -
Trying to use Airport Express (2012) in Hotel and it is not working
Hey folks, the title pretty much says it all. I picked up a new AE last week, and wanted to use while I travel to share out my hotels wired connection to my computers, iPhone and iPad. I am pretty good with networking, so I can't seem to figure out how to get around the double NAT error that I am getting from the Airport utility. It appears that the hotels network is blocking me from connecting. If I use my back up travel router (Zuni Connect) everything works fine. It appears the AE is not getting along with the hotel. Any ideas on how to get around this?
I traveled for years with an AirPort Express and have had virtually no problems connecting to the hotel networks if an Ethernet port is provided in the room.
Up until a few years ago, configuring the Express in Bridge Mode worked just fine, as hotels would allow several devices to connect without problems.
Unfortunately, hotels have become a lot smarter as they look for ways to generate more revenue. Many hotels now will only allow one connection if the Express is configured in Bridge Mode, so I started using the Express in router mode about 3 years ago to get around this.
Security wise, this is actually a bettter arrangement as Tesserax notes, because other users at the hotel cannot "see" your devices.
The Double NAT "error" can be ignored with an option in AirPort Utility if you wish, and the Express will display a nice, green light.
I have no trouble connecting 3-4 devices this way and the hotel only "sees" one device, so they only charge for one connection.
When the hotel only has wireless, that is when I bring out the second Express that I travel with, so I can use one Express to "join" the hotel network and provide an Ethernet signal to the second Express, which is configured as a router to allow multiple devices to connect. The hotel only "sees" one connection this way. -
Compilation errors using jhs 10.1.3.1 and jdeveloper 10.1.3.2
jdeveloper version: 10.1.3.2.0.4066
jheadstart version: 10.1.3.1.25
I have just installed both of the above and am receiving errors on compilation in both my viewcontroller and model projects.
I receive the following error on the view project as soon as jheadstart is enabled:
C:\myfilepath\ViewController\public_html\jheadstart\version.jsp
Error(25,34): identifier Version not found
which relates to this part of the jsp file in question:
<HTML>
<head>
<title>JHeadstart Version Information
</title>
</head>
<body>
<H1>JHeadstart Version Information</H1>
JHeadstart Runtime Version: <B><%= oracle.jheadstart.Version.VERSION %></B>
</body>
</html>
and the following error in the model project after I have generated the application:
C:\myfilepath\Model\src\test\jhs\model\common\AppModule.java
Error(5,8): JhsApplicationModule not found
which relates to this java file
package test.jhs.model.common;
import oracle.jbo.ApplicationModule;
import oracle.jheadstart.model.adfbc.v2.JhsApplicationModule;
// --- File generated by Oracle ADF Business Components Design Time.
public interface AppModule extends ApplicationModule, JhsApplicationModule {
Help.
(sorry, not sure why this message is ignoring my formatting - makes it a bit hard to read)Sean,
I just found out the same difference! Something must have gone wrong during the final production build. We have created a new build 10.1.3.1.26 with the correct jar file name, which can now be downloaded from cso.oracle.com.
I apologize for the inconvenience. Anybody that already downloaded 10.1.3.1 build 25, please download build 26, which is the new "official" 10.1.3.1 build number.
Steven Davelaar,
JHeadstart Team. -
If using airport express to play iTunes music with airplay feature with cell network (hotspot on cell phone) does it use data allowance?
No
-
MS SQL Server 2014: Error inserting into Temp table with index and identity field
In this thread, I mentioned a problem with SQL Server 2014:
SQL Server 2014: Bug with IDENTITY INSERT ON
The question was answered, it is a bug. To keep you informed on this issue, I open this discussion.
Problem:
The code below works perfectly fine on MS SQL Server 2008 R2 and MS SQL Server 2012, but gives an error every second time the proc is executed on MS SQL Server 2014. If I do not define any index on the temp table, the problem disappears. Defining the index
after the insert, does not help.
SET NOCOUNT ON
GO
IF EXISTS (SELECT 1 FROM sys.procedures WHERE name = 'usp_Test') DROP PROC dbo.usp_Test;
GO
CREATE PROC dbo.usp_Test AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #Source(ID integer NOT NULL);
INSERT INTO #Source VALUES (1), (2), (3);
CREATE TABLE #Dest (ID integer IDENTITY(1,1) NOT NULL);
CREATE INDEX #IDX_Dest ON #Dest (ID);
PRINT 'Check if the insert might cause an identity crisis';
SELECT 'Source' AS SourceTable, * FROM #Source;
SELECT 'Destination' AS DestTable, * FROM #Dest;
SET IDENTITY_INSERT #Dest ON;
PRINT 'Do the insert';
INSERT INTO #Dest (ID) SELECT ID FROM #Source;
PRINT 'Insert ready';
SET IDENTITY_INSERT #Dest OFF;
SELECT * FROM #Dest;
DROP TABLE #Source;
DROP TABLE #Dest;
END;
GO
PRINT 'First execution of the proc, everything OK';
EXEC dbo.usp_Test;
PRINT '';
PRINT 'Second execution of the proc, the insert fails.';
PRINT 'Removing the index #IDX_Dest causes the error to disappear.';
EXEC dbo.usp_Test;
GO
DROP PROC dbo.usp_Test;
GOThere is some progress. Communication from a former Microsoft employee tells us this:
Shivendra Vishal
Engineer at Microsoft
I am no longer with MS, and I do not have code access, however from the public symbols, I could make out following:
sqlmin!SetidentI2I4+0x1f3:
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] ds:00000000`00000000=????????????????
ExceptionAddress: 000007fef4d865d3 (sqlmin!SetidentI2I4+0x00000000000001f3)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
This is a read AV and from registers it is clear that we were trying to move the value of location pointed by qword of register rax which is not valid:
rax=0000000000000000 rbx=0000000000000038 rcx=0000000000001030
rdx=0000000000000006 rsi=00000001f55def98 rdi=00000000106fd070
rip=000007fef4d865d3 rsp=00000000106fcf40 rbp=00000000106fcfe9
r8=0000000000000000 r9=00000001f55def60 r10=00000001f55defa0
r11=00000000106fcd20 r12=0000000000000000 r13=0000000000000002
r14=00000001f49c3860 r15=00000001f58c0040
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
The stack is:
# Child-SP RetAddr Call Site
00 00000000`106fcf40 000007fe`f30c1437 sqlmin!SetidentI2I4+0x1f3
01 00000000`106fd050 000007fe`f474e7ce sqlTsEs!CEsExec::GeneralEval4+0xe7
02 00000000`106fd120 000007fe`f470e6ef sqlmin!CQScanUpdateNew::GetRow+0x43d
03 00000000`106fd1d0 000007fe`f08ff517 sqlmin!CQueryScan::GetRow+0x81
04 00000000`106fd200 000007fe`f091cebe sqllang!CXStmtQuery::ErsqExecuteQuery+0x36d
05 00000000`106fd390 000007fe`f091ccb9 sqllang!CXStmtDML::XretDMLExecute+0x2ee
06 00000000`106fd480 000007fe`f08fa058 sqllang!CXStmtDML::XretExecute+0xad
07 00000000`106fd4b0 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
08 00000000`106fd5f0 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
09 00000000`106fd7e0 000007fe`f152cfaa sqllang!CSQLSource::Execute+0x86c
0a 00000000`106fd9b0 000007fe`f152c9e8 sqllang!CStmtExecProc::XretLocalExec+0x25a
0b 00000000`106fda30 000007fe`f152a1d8 sqllang!CStmtExecProc::XretExecExecute+0x4e8
0c 00000000`106fe1e0 000007fe`f08fa058 sqllang!CXStmtExecProc::XretExecute+0x38
0d 00000000`106fe220 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
0e 00000000`106fe360 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
0f 00000000`106fe550 000007fe`f0902267 sqllang!CSQLSource::Execute+0x86c
10 00000000`106fe720 000007fe`f0909087 sqllang!process_request+0xa57
11 00000000`106feee0 000007fe`f2bf49d0 sqllang!process_commands+0x4a3
12 00000000`106ff200 000007fe`f2bf47b4 sqldk!SOS_Task::Param::Execute+0x21e
13 00000000`106ff800 000007fe`f2bf45b6 sqldk!SOS_Scheduler::RunTask+0xa8
14 00000000`106ff870 000007fe`f2c136ff sqldk!SOS_Scheduler::ProcessTasks+0x279
15 00000000`106ff8f0 000007fe`f2c138f0 sqldk!SchedulerManager::WorkerEntryPoint+0x24c
16 00000000`106ff990 000007fe`f2c13246 sqldk!SystemThread::RunWorker+0x8f
17 00000000`106ff9c0 000007fe`f2c13558 sqldk!SystemThreadDispatcher::ProcessWorker+0x3ab
18 00000000`106ffa70 00000000`775d59ed sqldk!SchedulerManager::ThreadEntryPoint+0x226
19 00000000`106ffb10 00000000`7780c541 kernel32!BaseThreadInitThunk+0xd
1a 00000000`106ffb40 00000000`00000000 ntdll!RtlUserThreadStart+0x21
Unassembling the function:
000007fe`f4d8658e 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d86591 4533e4 xor r12d,r12d
000007fe`f4d86594 410fb7d5 movzx edx,r13w
000007fe`f4d86598 4533c9 xor r9d,r9d
000007fe`f4d8659b 4533c0 xor r8d,r8d
000007fe`f4d8659e 488bc8 mov rcx,rax
000007fe`f4d865a1 4489642420 mov dword ptr [rsp+20h],r12d
000007fe`f4d865a6 41ff5230 call qword ptr [r10+30h]
000007fe`f4d865aa 8b5597 mov edx,dword ptr [rbp-69h]
000007fe`f4d865ad 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d865b0 4489642438 mov dword ptr [rsp+38h],r12d
000007fe`f4d865b5 4489642430 mov dword ptr [rsp+30h],r12d
000007fe`f4d865ba 458d442401 lea r8d,[r12+1]
000007fe`f4d865bf 4533c9 xor r9d,r9d
000007fe`f4d865c2 488bc8 mov rcx,rax
000007fe`f4d865c5 c644242801 mov byte ptr [rsp+28h],1
000007fe`f4d865ca 4488642420 mov byte ptr [rsp+20h],r12b
000007fe`f4d865cf 41ff5250 call qword ptr [r10+50h]
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] <=================== AV happened over here
000007fe`f4d865d6 488bc8 mov rcx,rax
000007fe`f4d865d9 4c8bf0 mov r14,rax
000007fe`f4d865dc ff5268 call qword ptr [rdx+68h]
000007fe`f4d865df 488d55e7 lea rdx,[rbp-19h]
000007fe`f4d865e3 4c8b00 mov r8,qword ptr [rax]
000007fe`f4d865e6 488bc8 mov rcx,rax
000007fe`f4d865e9 41ff5010 call qword ptr [r8+10h]
000007fe`f4d865ed f6450a04 test byte ptr [rbp+0Ah],4
I remember few issues with scan2ident function, I am not sure if they have fixed it however it appears that this is intoduced to SQL 2014 and we need help from MS to get this resolved as it needs code analysis.
It is not getting simulated for other versions of SQL apart from SQL 2014.
Also to add, interestingly, the value of rax is not visibly changed and it was successfully passed on to rcx, which has a valid value, so something should have changed the value of rax inside call to function using call qword ptr [r10+50h], and looking at this
it appears that it might be a list of functions and we are going at particular offset [50h]. So, bottom line is that the call to function qword ptr [r10+50h], should be changing something in rax, and debugging/analyzing this code might give us some more idea.
Maybe you are looking for
-
Logic for retreiving the values from a dynamic internal table
Hi all, I have an issue with the logic to fetch data from a dynamic internal table into fields. let me give you guys an example the sy-tfill = 9 (subject to vary). I need to populate the fields. Regards, Sukumar
-
The thing is, I DO have a credit card field info page in it, but I cannot download anything...not even anything for free...and when I fill the fields up with all the correct information it still claim my security code is wrong when it's right. Please
-
Photos sent from ipad to pc are upside on the pc
seems that the photos i send from my ipad via email to pc folks are upside in their emails. what is the problem kathy
-
Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence
Good morning everyone, I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM clien
-
Corrupted playlist -- any way to recover my music?
Well, Spotify has corrupted my current primary playlist. It seems scrambled with play list entries deleted at different places. The last couple entries don't even have an "added" date anymore and are not in the right "date added" order because of thi