Error: Installation package not supported by this processor type

How do I complete installation of Premier Elements 10? When near completion after an hour of downloading, I got the message"Installation package not supported by this processor type. Contact product vendor." On chat, Fariz suggested I download a trial version of Premier. After an hour with that effort, also no success. I have two folders on desktop for Premier, but neither seems openable.

What Computer/Operating system are you on? Could you check that it meets the system requirements listed at: http://www.adobe.com/products/premiere-elements/tech-specs.html

Similar Messages

MBAM Client 2.5 Error 1633 (package not supported by this processor type)

initial testing of MBAM 2.5 client was successful. Full deployment to 2600+ computers has failed on over 300+ with the error:
0x661 (1633) This installation package is not supported by this processor type. Contact your product vendor.
Of the 300+ in error, all are Lenovo and random models and processors. (i.e. no pattern) All with W7 x86 or x64.
Suggestions on where to start with this one?

I´m not sure, did I get you right, but I think the error you see is straight forward. Maybe you are pushing x64 client to x86 CPU or W7x86 By accident? If you have multiple architecture enviroment, perhaps you should push only x86 client. What
system do you utilize for mass distribution? ConfMgr has build-in requirement rules for Application Deployment you could use here.

I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.

I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
I am using Windows 8.

Hi,
Which version of Photoshop Elements are you trying to install?
Are you installing from DVD or a download?
If DVD, make sure you are using the Windows one, not the MAC one.
What device are you trying to install on?
Does your system meet the required spec?
Are you on Windows 8 or Windows 8.1?
Brian

Installation package is not supported by this processor type error while installing SqlSysClrTypes.msi in windows 7

Hi Team,
I am trying to restore/design few SSRS reports in my PPS Dashboard Designer 2013. On my process I got the error "Failed to load the appropriate report editor" and to rectify it I tried installing the SqlSysClrTypes.msi on my machine (32 bit). But
while installing, got the error "The Installation package is not supported by this processor type". kindly help me in getting link for downloading the correct version on the add-on.
Thanks,
-Arsath

Try below msi
http://download.microsoft.com/download/B/6/3/B63CAC7F-44BB-41FA-92A3-CBF71360F022/1033/x86/SQLSysClrTypes.msi
http://social.technet.microsoft.com/Forums/lync/en-US/dab8767e-92a0-4cee-aad8-1e216084acfa/getting-error-on-installation-of-sqlclrtypemsi-on-windows-server-2008-r2-64-bit-machine?forum=ocsclients
install the sqlsysclrtype.msi for sql server 2012
http://stackoverflow.com/questions/14991693/created-msi-but-get-installation-package-is-not-supported-by-this-processor-type
If this helped you resolve your issue, please mark it Answered

Can't install Premier Elements 10 on Win 7 32 bit, quad core 2.40ghz, install package not compatible with my processor type

Hello All, I am trying to install Premier Elements 10 on a Windows 7 Pro box 32bit running an Intel Q6600 Core 2 Quad Core @ 2.40ghz, 2gb ram, I get the following error " This installation package is not supported by this processor type, Contact your product vendor."," What's wrong?

Interesting, I guess I need to call the Alienware folks and find out why they installed a substandard processor in such an expensive gaming box. I do have several other processors I can swap it out with, do you have a recommendation on a good processor that will get the job done? Learning is never a waste of time, but giving up is. Thanks for your insight,

Using wall charger for first time I get error message "charging not supported by this accessory." Been using since December and not seen this before.

Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.

Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

IPhone error "Charging is not supported with this accessory"

I keep getting error "Charging is not supported with this accessory" ever since the last update. I only get this message when iphone is locked and not plugged in to anything. When phone is locked the message keeps popping up every few seconds, consiquently I'm having to charge at least twice a day!
Error only occurs when not plugged in & iphone locked & doesn't make any difference if wifi on or off
Connectors have been cleaned
iphone has been restored
iphone has been re-booted
Nothing seems to work and after researching, all similar posts seem to be pertaining to actually plugging in to something and the fix was "clean connector" this is not my problem, error only happens if not plugged in. I'm assuming it's a bug from the last update but my girlfriends iphone is fine.
Would someone please help as the drain on my phone is rediculous now, it wasn't that good to start with but now the phone is pretty useless unless I'm near a plug! It's also very annoying having the screen constantly coming to life with this error message, especially at night.
Thanks in advance for any help.
Wayne.

I've not been able to find any new solutions so I thought I would try repeating everything I've tried again. I started by re-cleaning the connector as, logically my error only occurs when not plugged in to anything. To my amazement the problem is now resolved, I did take quite a while cleaning this time using toothpicks, cotton buds and nail varnish remover. So I geuss I should have cleaned it better in the first place! Doh! Anyway it's FIXED!!

How to fix error charging is not supported with this accessory (iphone 3gs)

how to fix error charging is not supported with this accessory (iphone 3gs)?

This can mean there is some dirt, lint, or foreign material in the iPhone's dock connector port and it doesn't take much, or the dock connector port has damage with the pins or there is some moisture damage.

On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

Clean the iPhone charging port with a clean dry toothbrush.

Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

Welcome to Apple Support Communities
It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

MacOS10.5.8 error message Firefox not supported on this architecture????

Quit Firefox with 4 open web pages and then tried to open it about 20 minutes later. Error message "You cannot open the application Firefox.app because it is not supported on this architecture.

Firefox 4 and later versions aren't compatible with PPC, they are Intel only.<br />
http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
For older Macs that aren't supported in Firefox 4.0 & 5.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/ <br />
http://code.google.com/p/tenfourfox/
Or stick with Firefox 3.6. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

Installation says not support on this architecture

I am trying to install creative suite 5 design premium and it tells me that it can't open application because it's not supported on this architecture. I am running osx 10.5.8 on a Mac G5. I was told to uninstall my previous CS3 but it is still showing some programs in admin/preferences (just folders) so I tried to download the creative suite cleaner tool and it gives me the same message re: not supported on this architecture. It allowed me to install acrobat 9 pro with no problem. Can anyone tell me what I'm doing wrong and help figure this out? Thank you.

That's what I was afraid of. My hard drive crashed and had to get a new one. Unfortunately, they could not save my cs3 and I had purchased my computer from my previous employer and it was already loaded with cs3 and they have since gone out-of-business and I did not receive any installation disks or numbers for this program. I guess I'm just sol. Spent all my extra $ on new hard drive and CS5. Thank you for your help. It is appreciated very much.

My iPad has an error that says "charging not supported by this accessory"

I have an iPad 4 and one day I went to plug it in and the charger wouldnt connect. I went and bought both new peices of the charger, still doesn't charge. When i just leave it plugged in it pops up an error of " charging not supported by this accessory." Does any one have a remedy for this problem?

Yes, i have also tried connecting it to my computer, it also pops up the same error. When its plugged into the wall the whole screen turns black and a yellow triangle with the exclamation mark pops up. When i plug it into the computer with the apple cord a little blue box ( in the middle like the apple id password box) pops up.

Sudden issue: Charging is not supported with this accessory

Hello -
I've had a 32GB 3rd generation iPod Touch since right around the new year. It's worked nearly perfect since January until today, when I plugged it into my PC to charge. I got the error "Charging is not supported with this accessory".
This seems odd to me since it's charged just fine on this machine for the last five months. I tried using two different cords, tested it on my wife's Mac and a dock we have in the kitchen, which in both instances it worked just fine. I tested my wife's 2nd generation iPod touch on my computer and it worked just fine. It's just MY iPod that isn't charging at my computer all of a sudden. I can access it via iTunes, it just won't charge.
I also tried blowing out the connector pins with some compressed air. I have a USB hub which I usually plug this into and I tried it both plugging directly into my USB port AND the hub and neither worked. I also had two USB cords, both from Apple (one of which had never been used before) and it still won't charge at my computer.
The only thing I can think of is I recently updated my iTunes, but I don't know why that software would affect whether or not the iPod charges.
Any help would be greatly appreciated!
Thanks!
Jer

No, I appreciate your asking but we only have two iPod's, both are touches, and I had been using the same cord for both with no problem for the last five months. I did try both cords I had though to no avail. I wish it were that simple!
So many people have commented about this particular error but it seems like very few people have had it actually happen suddenly after months of use with no problem. So frustrating.
Luckily I can still charge it with the same cord on my wife's computer with no problem or the dock we have in the kitchen. I just want to know why it has suddenly decided to stop charging on my computer.
Thanks!

CS6 Dreamweaver "Not Supported on this type of mac"

Hello All,
I have a new Macbook Pro w/ retina display. I recently bought Dreamweaver CS6 to complement Photoshop and Illustrator CS6 versions. I am running OS X 10.8.1 and Dreamweaver seems to run fine as does Photoshop and Illustrator. After installing the newest Dreamweaver update, it no longer works and gives the error ...Not Supported on this type of mac. I have seen this thread posted with regard to older OS versions but am unsatisfied with any responses and perplexed as my mac is brand new.
GeoKevin

Geo, unfortunately, this is turning into a major problem although no one has figured out a solution. Keeping pressing Adobe support. I have a Mac but don't have this problem but you are not alone:
http://forums.adobe.com/message/4643443
http://forums.adobe.com/message/4644255
http://forums.adobe.com/message/4627683

Error: Installation package not supported by this processor type

Similar Messages

Maybe you are looking for