Error installing web-determinations 10.1.0.27 on WLS 10.3.3
I have ammended the application.properties with the following
load.rulebase.from.classpath =true
rulebase.path =rulebasesThe web-determinations seems to deploy without error but when I start the application I get the following error
Message icon - Error [HTTP:101216]Servlet: "WebDeterminationsServlet" failed to preload on startup in Web application: "web-determinations.war". com.oracle.determinations.web.platform.exceptions.WebDeterminationsException: Could not initialise Velocity Templating Engine at com.oracle.determinations.web.platform.templatingengine.VelocityTemplatingEngine.<init>(VelocityTemplatingEngine.java:97) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:176) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.<init>(WebDeterminationsServletContext.java:104) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.init(WebDeterminationsServlet.java:51) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409) at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: java.lang.ClassNotFoundException: org.apache.velocity.runtime.log.Log4JLogChute at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:169) at org.apache.velocity.runtime.log.LogManager.createLogSystem(LogManager.java:123) at org.apache.velocity.runtime.RuntimeInstance.initializeLogger(RuntimeInstance.java:553) at org.apache.velocity.runtime.RuntimeInstance.init(RuntimeInstance.java:226) at org.apache.velocity.runtime.RuntimeInstance.init(RuntimeInstance.java:461) at org.apache.velocity.app.VelocityEngine.init(VelocityEngine.java:106) at com.oracle.determinations.web.platform.templatingengine.VelocityTemplatingEngine.<init>(VelocityTemplatingEngine.java:95) ... 45 more
has anyone installed this configuration, have I missed something?
cheers
James
JDT wrote:
Now if you want to add rules what you can do to make life easier is to install a directory in the classpath, e.g. set the classpath to /u01/oracle/opa. To do this edit the commEnv.sh (linux) and add the directory to the classpath.
On the OS create a new directory rulesbase and add your rules in there.
To see the rules you need stop and start the web-determination app in the weblogic console.
cheers
JamesI create a "rulebase" directory. This is the directory we set in the class path? Sorry for the stupid question.
Thanks.
-muktech
Edited by: muktech on May 25, 2010 2:30 PM
Edited by: muktech on May 25, 2010 2:31 PM
Similar Messages
-
Errors installing web service to use dreamweaver extension
Portal Version: 10g
OS/Vers. Where Portal is Installed:: Linux AS 2.1
Errors installing web service to use dreamweaver extension
Recently I download the dreamweaver extension for portal, but when I try to install it several errors are raised... in the installation guide the next message appear:
This installation for this feature is an easy 3 step procedure.
1. Installing the Portal web service
2. Configuring the web service to work with your portal (one time administrative process)
3. Installing the PortalTemplates extension for Dreamweaver MX
well but when I try to run the 1 step everything goes wrong...
in the guide say:
# Transfer this file to the OC4J_HOME/j2ee/home directory of the OC4J
(please make sure that the OC4J is up and running)
# Use the following command to install the web service
java -jar admin.jar ormi://<oc4j_host>:<oc4j_ormi_port>
<username> <password>
-deploy -file portalTemplate.ear -deploymentName portalTemplate
here it's where I have some questions,
1. the ormi referers to the rmi ok (I think that), well then I go tho the iasconsole and search for the ports and is show:
home RMI 3202
OC4J_Portal RMI 3203
OC4J_BI_Forms RMI 3204
then I use the home-> port 3202
java -jar admin.jar ormi://myhost.midtierinstall.com:3202
ias_admin ias_midtier_admin_password -deploy -file portalTemplate.ear -deploymentName portalTemplate
but the following messages appear :
Error: Unable to find java:ServerAdministrator : lookup error:javax.naming.AuthenticationException invalid username/passwod for default (ias_admin).... and the error continue... but the problem is that the password works when I use the enterprise manager in that midtier console...
I want to know if I'm doing something wrong or how I should use this command to install that web serviceThe ormi is the rmi port in the OC4J. This coold be found in oc4j_home/j2ee/home/config/rmi.xml file. The default port is 23791.
Hope this helps,
Ramya -
Error while deploying web-determinations in 10gR3 & weblogic 11g
Hi,
I am installing OPA 10.0.1 for configuring Siebel connector, for this on Linux I am deploying web-determinations & determination-server on 10gR3.
I was able to successfully deploy determination-server and I am facing error while deploying web-determinations
I am facing below error when accessing web-determinations URL after deploying in 10gR3 ( 10.1.3.3 ).
===================
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details
===================
No error is being logged in while application logs.
I also tried deploying in weblogic 11g (10.3.1) and I have below error ,
===================
[HTTP:101216]Servlet: "WebDeterminationsServlet" failed to preload on startup in Web application: "web-determinations.war". com.oracle.determinations.interview.engine.exceptions.EngineConfigurationException: No rulebase directory specified at com.oracle.determinations.interview.engine.local.FileRulebaseService.<init>(FileRulebaseService.java:49) at com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:91) at com.oracle.determinations.interview.engine.local.LocalInterviewEngine.<init>(LocalInterviewEngine.java:34) at com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:163) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.<init>(WebDeterminationsServletContext.java:91) at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.init(WebDeterminationsServlet.java:51) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:521) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1913) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1887) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1805) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3041) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1374) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:452) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:629) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:206) at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:40) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:140) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:106) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
=====================
Pls let us know any configuration needs to be done.
Pls advise.Hey Suni,
It appears that there is a section missing out of the current installation guide for Web Determinations. The reason you're getting that error is because you are deploying to application to WebLogic which doesn't expand the war by default so you need to configure the rulebase loader. Before you add proceed with the steps in the install guide you need to:
# Unpack the web-determinations.war file
# Copy the rulebases you wish to install to <webroot>/WEB-INF/classes/rulebases
# Edit the following setting in the application.properties file (<webroot>/WEB-INF/classes/configuration):
load.rulebase.from.classpath =true
rulebase.path =rulebases# Repack the war file
# Proceed with the installation steps as set out in the installation guide
I'll have the installation guide fixed and updated as soon as possible.
Thanks,
Kristy -
I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Error while installing web dispatcher NW04S SR2
Hi there,
Get this error when installing web dispatcher.... step after selecting the kernel source...
Pls help??
ERROR 2007-01-29 14:25:23
MUT-03011 Execution of the command "C:\WINDOWS\TEMP\2\sapinst_exe.6196.1170073192\SAPCAR.exe -x -v -g -i -f D:\test/DBINDEP/SAPEXE.SAR, webdispinst.lst" finished with return code 29. Output: SAPCAR: no archives specified for extracting (error 29). There are no more files.I always setup SAP Web Dispatcher by running "sapwebdisp -bootstrap", although I haven't tried with SR2...
Cheers -
Getting connection error after installing Web Dispatcher for JAVA engine
Hi SAP Guru's,
I have installed Web Dispatcher instance on solution manager server machine for Production JAVA portal. I am getting below error when I am trying to access Production JAVA portal.
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Sat Feb 05 16:18:12 2011
Module: http_route.c
Line: 3139
Server: ERPSOL_WDP_04
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
Where as I have define all suitavle parameters in Web Dispatcher instance profile
SAPSYSTEMNAME = WDP
SAPGLOBALHOST = ERPSOL
SAPSYSTEM = 04
INSTANCE_NAME = W04
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = sapepjlg.pdilnoida.com
ms/http_port = 8102
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8105
Please help on this as I have to deliver this before go live.
Regards,
BijayHi Bijay,
Please check if services /public/icman, /public/icm_info are active & accessible in SICF(in case of Dual stack system) tx.
Regards,
Neeraj -
Getting error with Web Templates in BI 7.0
Hi Everyone,
We have upgraded BW3.5 to BW7.0. When we are executing any Web Template in browser we are getting this error-
RSBOLAP 018 Java system error:call FM RSWR_TEMPLATE_PROCESS_PROXY to ProgId CHWSXID01.....
For your information we have installed EP Usage and BI on the portal but Portal is not configured to the BI. Is it necessary to configure Portal to the BI?
After this when we are login to the portal we are getting this error-
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot find BI master system
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000013 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Hewlett-Packard Company - 1.4.2 1.4.2.14-070618-19:48-PA_RISC2.0W PA2.0W (aCC_AP)
Operating System HP-UX - PA_RISC2.0W - B.11.11
Deployed SCAs
SCA Version SP Patch Compiled Deployed
ADSSAP 7.00 13 0 2007-08-12 01:18:54 CEST 2007-11-17 02:43:53 CET
BASETABLES 7.00 13 0 2007-08-12 01:36:38 CEST 2007-11-17 01:22:45 CET
BI-BASE-S 7.00 13 0 2007-08-12 12:03:10 CEST 2007-12-08 09:58:16 CET
BI-IBC 7.00 13 0 2007-08-12 12:03:28 CEST 2007-12-08 09:58:26 CET
BI-REPPLAN 7.00 13 0 2007-08-09 07:49:39 CEST 2007-12-08 10:01:05 CET
BI-WDALV 7.00 13 0 2007-08-09 07:49:47 CEST 2007-12-08 09:58:55 CET
BIWEBAPP 7.00 13 0 2007-08-12 12:05:56 CEST 2007-12-08 09:43:55 CET
BI_MMR 7.00 13 0 2007-08-12 01:37:49 CEST 2007-11-17 02:44:46 CET
BI_UDI 7.00 13 0 2007-08-11 19:04:00 CEST 2007-11-17 02:46:49 CET
CAF 7.00 13 0 2007-08-09 09:23:15 CEST 2007-11-17 02:53:13 CET
CAF-KM 7.00 13 0 2007-08-09 07:54:22 CEST 2007-12-08 10:21:28 CET
CAF-UM 7.00 13 0 2007-08-09 09:23:24 CEST 2007-11-17 02:54:18 CET
CORE-TOOLS 7.00 13 0 2007-08-12 01:41:21 CEST 2007-11-17 01:19:15 CET
EP-PSERV 7.00 13 0 2007-09-06 14:03:50 CEST 2007-12-08 10:02:22 CET
EP-WDC 7.00 13 0 2007-08-12 12:41:08 CEST 2007-12-08 10:03:50 CET
EPBC 7.00 13 0 2007-08-12 12:37:44 CEST 2007-12-08 08:07:23 CET
EPBC2 7.00 13 0 2007-08-12 12:38:06 CEST 2007-12-08 10:03:56 CET
JLOGVIEW 7.00 13 0 2007-08-12 00:16:00 CEST 2007-11-17 01:19:52 CET
JSPM 7.00 13 0 2007-08-12 00:17:00 CEST 2007-12-06 16:41:39 CET
KM-KW_JIKS 7.00 13 0 2007-08-12 01:45:19 CEST 2007-11-17 02:54:37 CET
KMC-BC 7.00 13 0 2007-08-12 12:41:47 CEST 2007-12-08 10:05:28 CET
KMC-CM 7.00 13 0 2007-08-12 12:43:04 CEST 2007-12-08 10:06:52 CET
KMC-COLL 7.00 13 0 2007-08-12 12:43:35 CEST 2007-12-08 10:07:49 CET
LM-PORTAL 7.00 13 0 2007-08-09 07:58:38 CEST 2007-12-08 10:07:59 CET
LM-SERVICE 6.40 10 0 2004-12-23 01:42:43 CET 2007-11-17 01:18:14 CET
LM-TOOLS 7.00 13 0 2007-09-06 10:46:34 CEST 2007-11-17 03:05:32 CET
NET-PDK 7.00 13 0 2007-08-12 12:45:34 CEST 2007-12-08 09:51:51 CET
RTC 7.00 13 0 2007-08-12 12:48:07 CEST 2007-12-08 09:51:56 CET
RTC-STREAM 7.00 13 0 2007-08-12 12:48:07 CEST 2007-12-08 10:08:05 CET
SAP-EU 7.00 13 0 2007-08-09 08:01:01 CEST 2007-12-08 10:19:31 CET
SAP-JEE 7.00 13 0 2007-08-12 01:53:11 CEST 2007-11-17 01:24:19 CET
SAP-JEECOR 7.00 13 0 2007-09-07 08:23:34 CEST 2007-11-17 01:27:06 CET
SAP_JTECHF 7.00 13 0 2007-08-12 01:56:44 CEST 2007-11-17 01:28:18 CET
SAP_JTECHS 7.00 13 0 2007-08-12 01:59:51 CEST 2007-11-17 02:32:48 CET
UMEADMIN 7.00 13 0 2007-08-09 09:39:47 CEST 2007-11-17 03:06:23 CET
UWLJWF 7.00 13 0 2007-08-12 12:52:23 CEST 2007-12-08 10:08:51 CET
VCBASE 7.00 13 0 2007-08-12 12:52:34 CEST 2007-12-08 10:22:05 CET
VCFLEX 7.00 13 0 2007-08-12 12:53:39 CEST 2007-12-08 10:21:32 CET
VCFRAMEWORK 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:21:42 CET
VCKITBI 7.00 13 0 2007-08-12 12:23:20 CEST 2007-12-08 10:22:10 CET
VCKITGP 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:22:15 CET
VCKITXX 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:22:19 CET
WDEXTENSIONS 7.00 13 0 2007-08-09 08:05:30 CEST 2007-12-08 10:24:17 CET
Full Exception Chain
Log ID 00306EF4B9BB0076000000120000327700044245C894263C
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:259)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:172)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:65)
at com.sap.ip.bi.webapplications.runtime.impl.Page.constructPage(Page.java:942)
at com.sap.ip.bi.webapplications.runtime.impl.Page.<init>(Page.java:761)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.createPage(Controller.java:511)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:972)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:488)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:22)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Helpful answers will be rewarded....
Thanks and Regards,
PankajSingle Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers. -
Unable to install web server 7.0U2 on linux
hello,
i am trying to install web server 7.0U2 on amd64 Debian Linux. however, the installer seems to think that not enough disk space is available, even though there is 18GB free space on /.
this is the transcript of the installation:
harmony:/usr/home/river/sws64# ./setup
Welcome to the Sun Java System Web Server 7.0U2 (64-Bit) installation wizard.
You will be asked to specify preferences that determine how Sun Java System Web
Server 7.0U2 (64-Bit) is installed and configured.
The installation program pauses as questions are presented so you can read the
information and make your choice. When you are ready to continue, press Enter
(Return on some keyboards).
<Press ENTER to Continue>
Some questions require that you provide more detailed information. Some
questions also display default values in brackets []. For example, yes is the
default answer to the following question:
Are you sure? [yes]
To accept the default, press Enter.
To provide a different answer, type the information at the command prompt and
then press Enter.
<Press ENTER to Continue>
Sun Microsystems, Inc. ("Sun") SOFTWARE LICENSE AGREEMENT ("SLA") and
ENTITLEMENT for SOFTWARE
A. ENTITLEMENT for SOFTWARE. Capitalized terms not defined in this
Entitlement have the meanings ascribed to them in the SLA (attached below
as Section B). These terms will supersede any inconsistent or conflicting
terms in the SLA.
Licensee ("You"): The entity receiving the Software from Sun.
Effective Date: Date You receive the Software.
Software: Sun Software Portfolio, which may include the following: Solaris
10, Sun Java System Access Manager, Sun Java System Directory Server
Enterprise Edition, Sun Java System Identity Manager, Sun Java System
Identity Manager Resource Adapters: (a) Windows Gateway Script Resource
Adapter, (b) SQL Script Resource Adapter, (c) Unix Script Resource
Adapter, (d) Database Table Resource Adapter, (e) Host Mainframe Resource
Adapter, (f) JMS Resource Adapter, (g) Simulated Resource Adapter, and (h)
Resource Extension Facility (REF) kit, Sun Java System Federation Manager,
Sun Java Identity Auditor, Sun Java System Application Server Enterprise
Edition, Sun Java System Message Queue, Sun Java System Web Server, Sun
Java System Web Proxy Server, Sun Java System Portal Server, Service
Registry, Sun Java System Connector for Microsoft Outlook, Sun Java System
<--[6%]--[ENTER To Continue]--[n To Finish]-->n
Sun Java System Web Server 7.0 License
If you have read and accept all terms of the Software License Agreement,
answer 'yes' to continue with the installation.
If you do not accept all terms, answer 'no' to stop the installation without
installing the product. You cannot install the product without accepting the
agreement.
Have you read the Software License Agreement and do you accept all terms
[no] {"<" goes back, "!" exits}? yes
Sun Java System Web Server 7.0 components will be installed in the directory
listed below, referred to as the installation directory. To use the specified
directory, press Enter. To use a different directory, enter the full path of
the directory and press Enter.
Sun Java System Web Server 7.0 Installation Directory [sun/webserver7] {"<"
goes back, "!" exits}: /opt/webserver7
Select the Type of Installation
1. Express
2. Custom
3. Exit
What would you like to do [1] {"<" goes back, "!" exits}? 2
Component Selection
1. Server Core
2. Administration Command Line Interface
3. Sample Applications
4. Language Pack
Enter the comma-separated list [ 1,2,3,4,] {"<" goes back, "!" exits}: 1,2
Based on component dependencies for your selection...
The following components will be installed:
Server Core
Administration Command Line Interface
Java Configuration
Sun Java System Web Server 7.0 requires Java SE Development Kit (JDK). Provide
the path to a JDK 1.5.0_12 or greater.
1. Install Java SE Development Kit (JDK) 1.5.0_12
2. Reuse existing Java SE Development Kit (JDK) 1.5.0_12 or greater
3. Exit
What would you like to do [1] {"<" goes back, "!" exits}? 2
Enter the path to an existing, compatible Java SE Development Kit (JDK)
installation. [usr/home/river/sws64/WebServer/jdk] {"<" goes back, "!"
exits} /usr/lib/jvm/java-1.5.0-sun-1.5.0.14
Insufficient Disk space. Total product size is 89 MB. The installer requires
additional disk space of 89 MB. Free up some disk space and try again.
<Press ENTER to continue> {"<" goes back, "!" exits} !Hi,
I've tried to install web server 7.0U3 on Debian etch 64 today and ran into the same problem. The solution to that problem was to install those packages: ia32-libs libstdc++5 as discribed here in one of the comments -> http://blogs.sun.com/kkranz/entry/installing_sun_java_system_web
Cheers,
Alex -
"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
ChrisI know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
[Device]
Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
Installed INF =
Previous driver package =
! Warning 0xE0000235: DriverPackageGetPath failed.
Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
Using RegDeleteKeyEx
!!! ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels -
Installation Error: "install" can't be opened-"
After spending 4 hours downloaded CS Design Premium 5.5. From here:
http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
Double click and hope to begin when I get the following error, ' "install can't be opened because it is from an unidentified developer. Your security preferences allow installation of only apps from the Mac App Store and identified developers. "install" is on the disk image "DesignPremium_CS5_LS1.dmg". Safari downloaded this disk image on January 11, 2014 from prodesigntools.com"
So I go back to the web page and read the instructions that says download 'Adobe Download Assistant', in order to get my CSDP5.5 up and running....That ended up being a total waste.
If I change my preferences so I can download from 'anywhere', wouldn't that be opening up my computer to virus? An IT person at my company said that Mac's can get virus' just like PC's but Apple just doesn't care.
Can I download CSDP5.5 for my desktop from the App Store?
Let me know.
Thanks!Change your Mac preferences.
-
Re: problem while installing WEB-enyterprise
Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
How to install WEB PL/SQL?
When I running "Install Web PL-SQL Generator",I got the following errors:
Someone help me, please!
No errors.
No errors.
Package wsglm...
Input truncated to 11 characters
No errors.
Package wsgjsl...
No errors.
Package wsgfl...
No errors.
Package wsgl...
Warning: Package created with compilation errors.
Errors for PACKAGE WSGL:
LINE/COL ERROR
62/22 PLS-00201: identifier 'OWA.VC_ARR' must be declared
62/22 PL/SQL: Declaration ignored
63/22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be declared
63/22 PL/SQL: Declaration ignored
Package body wsgjsl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGJSL:
LINE/COL ERROR
280/7 PL/SQL: Statement ignored
311/53 PLS-00905: object OWNER.WSGL is invalid
334/7 PL/SQL: Statement ignored
344/17 PLS-00905: object OWNER.WSGL is invalid
472/7 PL/SQL: Statement ignored
493/31 PLS-00905: object OWNER.WSGL is invalid
813/10 PL/SQL: Statement ignored
813/22 PLS-00905: object OWNER.WSGL is invalid
828/10 PL/SQL: Statement ignored
828/22 PLS-00905: object OWNER.WSGL is invalid
843/10 PL/SQL: Statement ignored
843/22 PLS-00905: object OWNER.WSGL is invalid
852/10 PL/SQL: Statement ignored
852/22 PLS-00905: object OWNER.WSGL is invalid
861/10 PL/SQL: Statement ignored
861/22 PLS-00905: object OWNER.WSGL is invalid
884/10 PL/SQL: Statement ignored
884/22 PLS-00905: object OWNER.WSGL is invalid
960/3 PL/SQL: Statement ignored
960/15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be declared
Package body wsgl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGL:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object OWNER.WSGL is invalid
1/14 PLS-00304: cannot compile body of 'WSGL' without its
specification
Package body wsgfl...
No errors.
No errors.
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT1:
LINE/COL ERROR
49/4 PLS-00201: identifier 'HTP.P' must be declared
49/4 PL/SQL: Statement ignored
51/7 PLS-00201: identifier 'HTP.P' must be declared
51/7 PL/SQL: Statement ignored
53/10 PLS-00201: identifier 'HTP.P' must be declared
53/10 PL/SQL: Statement ignored
60/4 PLS-00201: identifier 'HTP.P' must be declared
60/4 PL/SQL: Statement ignored
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT2:
LINE/COL ERROR
36/13 PLS-00201: identifier 'HTP.P' must be declared
36/13 PL/SQL: Statement ignored
42/10 PLS-00201: identifier 'HTP.P' must be declared
42/10 PL/SQL: Statement ignored
48/13 PLS-00201: identifier 'HTP.P' must be declared
48/13 PL/SQL: Statement ignored
53/16 PLS-00201: identifier 'HTP.P' must be declared
53/16 PL/SQL: Statement ignored
59/13 PLS-00201: identifier 'HTP.P' must be declared
59/13 PL/SQL: Statement ignored
64/10 PLS-00201: identifier 'HTP.P' must be declared
64/10 PL/SQL: Statement ignored
70/13 PLS-00201: identifier 'HTP.P' must be declared
70/13 PL/SQL: Statement ignored
87/28 PLS-00201: identifier 'HTP.BR' must be declared
87/28 PL/SQL: Statement ignored
92/25 PLS-00201: identifier 'HTP.P' must be declared
92/25 PL/SQL: Statement ignored
99/13 PLS-00201: identifier 'HTP.P' must be declared
99/13 PL/SQL: Statement ignored
The following synonyms already exist. Please check that they are valid:
OWA
OWA_UTIL
OWA_COOKIE
OWA_IMAGE
OWA_INIT
OWA_OPT_LOCK
OWA_PATTERN
OWA_SEC
OWA_TEXT
HTP
HTF
CG$ERRORS
WSGL
WSGJSL
WSGLM
WSGFL
Webserver Generator Compilation Report
NAME TY LINE COL TEXT
WSGJSL PB 311 53 PLS-00905: object OWNER.WSGL is invalid
280 7 PL/SQL: Statement ignored
344 17 PLS-00905: object OWNER.WSGL is invalid
334 7 PL/SQL: Statement ignored
493 31 PLS-00905: object OWNER.WSGL is invalid
472 7 PL/SQL: Statement ignored
813 22 PLS-00905: object OWNER.WSGL is invalid
813 10 PL/SQL: Statement ignored
828 22 PLS-00905: object OWNER.WSGL is invalid
828 10 PL/SQL: Statement ignored
843 22 PLS-00905: object OWNER.WSGL is invalid
843 10 PL/SQL: Statement ignored
852 22 PLS-00905: object OWNER.WSGL is invalid
852 10 PL/SQL: Statement ignored
861 22 PLS-00905: object OWNER.WSGL is invalid
861 10 PL/SQL: Statement ignored
884 22 PLS-00905: object OWNER.WSGL is invalid
884 10 PL/SQL: Statement ignored
960 15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be
declared
NAME TY LINE COL TEXT
WSGJSL PB 960 3 PL/SQL: Statement ignored
WSGL PA 62 22 PLS-00201: identifier 'OWA.VC_ARR' must be
CK declared
AG
E
62 22 PL/SQL: Declaration ignored
63 22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be
declared
63 22 PL/SQL: Declaration ignored
PB 1 14 PLS-00905: object OWNER.WSGL is invalid
1 14 PLS-00304: cannot compile body of 'WSGL' without
its specification
0 0 PL/SQL: Compilation unit analysis terminated
nullWhen I running "Install Web PL-SQL Generator",I got the following errors:
Someone help me, please!
No errors.
No errors.
Package wsglm...
Input truncated to 11 characters
No errors.
Package wsgjsl...
No errors.
Package wsgfl...
No errors.
Package wsgl...
Warning: Package created with compilation errors.
Errors for PACKAGE WSGL:
LINE/COL ERROR
62/22 PLS-00201: identifier 'OWA.VC_ARR' must be declared
62/22 PL/SQL: Declaration ignored
63/22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be declared
63/22 PL/SQL: Declaration ignored
Package body wsgjsl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGJSL:
LINE/COL ERROR
280/7 PL/SQL: Statement ignored
311/53 PLS-00905: object OWNER.WSGL is invalid
334/7 PL/SQL: Statement ignored
344/17 PLS-00905: object OWNER.WSGL is invalid
472/7 PL/SQL: Statement ignored
493/31 PLS-00905: object OWNER.WSGL is invalid
813/10 PL/SQL: Statement ignored
813/22 PLS-00905: object OWNER.WSGL is invalid
828/10 PL/SQL: Statement ignored
828/22 PLS-00905: object OWNER.WSGL is invalid
843/10 PL/SQL: Statement ignored
843/22 PLS-00905: object OWNER.WSGL is invalid
852/10 PL/SQL: Statement ignored
852/22 PLS-00905: object OWNER.WSGL is invalid
861/10 PL/SQL: Statement ignored
861/22 PLS-00905: object OWNER.WSGL is invalid
884/10 PL/SQL: Statement ignored
884/22 PLS-00905: object OWNER.WSGL is invalid
960/3 PL/SQL: Statement ignored
960/15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be declared
Package body wsgl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGL:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object OWNER.WSGL is invalid
1/14 PLS-00304: cannot compile body of 'WSGL' without its
specification
Package body wsgfl...
No errors.
No errors.
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT1:
LINE/COL ERROR
49/4 PLS-00201: identifier 'HTP.P' must be declared
49/4 PL/SQL: Statement ignored
51/7 PLS-00201: identifier 'HTP.P' must be declared
51/7 PL/SQL: Statement ignored
53/10 PLS-00201: identifier 'HTP.P' must be declared
53/10 PL/SQL: Statement ignored
60/4 PLS-00201: identifier 'HTP.P' must be declared
60/4 PL/SQL: Statement ignored
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT2:
LINE/COL ERROR
36/13 PLS-00201: identifier 'HTP.P' must be declared
36/13 PL/SQL: Statement ignored
42/10 PLS-00201: identifier 'HTP.P' must be declared
42/10 PL/SQL: Statement ignored
48/13 PLS-00201: identifier 'HTP.P' must be declared
48/13 PL/SQL: Statement ignored
53/16 PLS-00201: identifier 'HTP.P' must be declared
53/16 PL/SQL: Statement ignored
59/13 PLS-00201: identifier 'HTP.P' must be declared
59/13 PL/SQL: Statement ignored
64/10 PLS-00201: identifier 'HTP.P' must be declared
64/10 PL/SQL: Statement ignored
70/13 PLS-00201: identifier 'HTP.P' must be declared
70/13 PL/SQL: Statement ignored
87/28 PLS-00201: identifier 'HTP.BR' must be declared
87/28 PL/SQL: Statement ignored
92/25 PLS-00201: identifier 'HTP.P' must be declared
92/25 PL/SQL: Statement ignored
99/13 PLS-00201: identifier 'HTP.P' must be declared
99/13 PL/SQL: Statement ignored
The following synonyms already exist. Please check that they are valid:
OWA
OWA_UTIL
OWA_COOKIE
OWA_IMAGE
OWA_INIT
OWA_OPT_LOCK
OWA_PATTERN
OWA_SEC
OWA_TEXT
HTP
HTF
CG$ERRORS
WSGL
WSGJSL
WSGLM
WSGFL
Webserver Generator Compilation Report
NAME TY LINE COL TEXT
WSGJSL PB 311 53 PLS-00905: object OWNER.WSGL is invalid
280 7 PL/SQL: Statement ignored
344 17 PLS-00905: object OWNER.WSGL is invalid
334 7 PL/SQL: Statement ignored
493 31 PLS-00905: object OWNER.WSGL is invalid
472 7 PL/SQL: Statement ignored
813 22 PLS-00905: object OWNER.WSGL is invalid
813 10 PL/SQL: Statement ignored
828 22 PLS-00905: object OWNER.WSGL is invalid
828 10 PL/SQL: Statement ignored
843 22 PLS-00905: object OWNER.WSGL is invalid
843 10 PL/SQL: Statement ignored
852 22 PLS-00905: object OWNER.WSGL is invalid
852 10 PL/SQL: Statement ignored
861 22 PLS-00905: object OWNER.WSGL is invalid
861 10 PL/SQL: Statement ignored
884 22 PLS-00905: object OWNER.WSGL is invalid
884 10 PL/SQL: Statement ignored
960 15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be
declared
NAME TY LINE COL TEXT
WSGJSL PB 960 3 PL/SQL: Statement ignored
WSGL PA 62 22 PLS-00201: identifier 'OWA.VC_ARR' must be
CK declared
AG
E
62 22 PL/SQL: Declaration ignored
63 22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be
declared
63 22 PL/SQL: Declaration ignored
PB 1 14 PLS-00905: object OWNER.WSGL is invalid
1 14 PLS-00304: cannot compile body of 'WSGL' without
its specification
0 0 PL/SQL: Compilation unit analysis terminated
null -
How can I install WEB PL/SQL Generator?
When I running "Install Web PL-SQL Generator",I got the following errors:
Someone help me, please!
No errors.
No errors.
Package wsglm...
Input truncated to 11 characters
No errors.
Package wsgjsl...
No errors.
Package wsgfl...
No errors.
Package wsgl...
Warning: Package created with compilation errors.
Errors for PACKAGE WSGL:
LINE/COL ERROR
62/22 PLS-00201: identifier 'OWA.VC_ARR' must be declared
62/22 PL/SQL: Declaration ignored
63/22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be declared
63/22 PL/SQL: Declaration ignored
Package body wsgjsl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGJSL:
LINE/COL ERROR
280/7 PL/SQL: Statement ignored
311/53 PLS-00905: object OWNER.WSGL is invalid
334/7 PL/SQL: Statement ignored
344/17 PLS-00905: object OWNER.WSGL is invalid
472/7 PL/SQL: Statement ignored
493/31 PLS-00905: object OWNER.WSGL is invalid
813/10 PL/SQL: Statement ignored
813/22 PLS-00905: object OWNER.WSGL is invalid
828/10 PL/SQL: Statement ignored
828/22 PLS-00905: object OWNER.WSGL is invalid
843/10 PL/SQL: Statement ignored
843/22 PLS-00905: object OWNER.WSGL is invalid
852/10 PL/SQL: Statement ignored
852/22 PLS-00905: object OWNER.WSGL is invalid
861/10 PL/SQL: Statement ignored
861/22 PLS-00905: object OWNER.WSGL is invalid
884/10 PL/SQL: Statement ignored
884/22 PLS-00905: object OWNER.WSGL is invalid
960/3 PL/SQL: Statement ignored
960/15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be declared
Package body wsgl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGL:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object OWNER.WSGL is invalid
1/14 PLS-00304: cannot compile body of 'WSGL' without its
specification
Package body wsgfl...
No errors.
No errors.
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT1:
LINE/COL ERROR
49/4 PLS-00201: identifier 'HTP.P' must be declared
49/4 PL/SQL: Statement ignored
51/7 PLS-00201: identifier 'HTP.P' must be declared
51/7 PL/SQL: Statement ignored
53/10 PLS-00201: identifier 'HTP.P' must be declared
53/10 PL/SQL: Statement ignored
60/4 PLS-00201: identifier 'HTP.P' must be declared
60/4 PL/SQL: Statement ignored
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT2:
LINE/COL ERROR
36/13 PLS-00201: identifier 'HTP.P' must be declared
36/13 PL/SQL: Statement ignored
42/10 PLS-00201: identifier 'HTP.P' must be declared
42/10 PL/SQL: Statement ignored
48/13 PLS-00201: identifier 'HTP.P' must be declared
48/13 PL/SQL: Statement ignored
53/16 PLS-00201: identifier 'HTP.P' must be declared
53/16 PL/SQL: Statement ignored
59/13 PLS-00201: identifier 'HTP.P' must be declared
59/13 PL/SQL: Statement ignored
64/10 PLS-00201: identifier 'HTP.P' must be declared
64/10 PL/SQL: Statement ignored
70/13 PLS-00201: identifier 'HTP.P' must be declared
70/13 PL/SQL: Statement ignored
87/28 PLS-00201: identifier 'HTP.BR' must be declared
87/28 PL/SQL: Statement ignored
92/25 PLS-00201: identifier 'HTP.P' must be declared
92/25 PL/SQL: Statement ignored
99/13 PLS-00201: identifier 'HTP.P' must be declared
99/13 PL/SQL: Statement ignored
The following synonyms already exist. Please check that they are valid:
OWA
OWA_UTIL
OWA_COOKIE
OWA_IMAGE
OWA_INIT
OWA_OPT_LOCK
OWA_PATTERN
OWA_SEC
OWA_TEXT
HTP
HTF
CG$ERRORS
WSGL
WSGJSL
WSGLM
WSGFL
Webserver Generator Compilation Report
NAME TY LINE COL TEXT
WSGJSL PB 311 53 PLS-00905: object OWNER.WSGL is invalid
280 7 PL/SQL: Statement ignored
344 17 PLS-00905: object OWNER.WSGL is invalid
334 7 PL/SQL: Statement ignored
493 31 PLS-00905: object OWNER.WSGL is invalid
472 7 PL/SQL: Statement ignored
813 22 PLS-00905: object OWNER.WSGL is invalid
813 10 PL/SQL: Statement ignored
828 22 PLS-00905: object OWNER.WSGL is invalid
828 10 PL/SQL: Statement ignored
843 22 PLS-00905: object OWNER.WSGL is invalid
843 10 PL/SQL: Statement ignored
852 22 PLS-00905: object OWNER.WSGL is invalid
852 10 PL/SQL: Statement ignored
861 22 PLS-00905: object OWNER.WSGL is invalid
861 10 PL/SQL: Statement ignored
884 22 PLS-00905: object OWNER.WSGL is invalid
884 10 PL/SQL: Statement ignored
960 15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be
declared
NAME TY LINE COL TEXT
WSGJSL PB 960 3 PL/SQL: Statement ignored
WSGL PA 62 22 PLS-00201: identifier 'OWA.VC_ARR' must be
CK declared
AG
E
62 22 PL/SQL: Declaration ignored
63 22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be
declared
63 22 PL/SQL: Declaration ignored
PB 1 14 PLS-00905: object OWNER.WSGL is invalid
1 14 PLS-00304: cannot compile body of 'WSGL' without
its specification
0 0 PL/SQL: Compilation unit analysis terminated
nullHi,
Is necesary install XDB?
Because i have executed;
select * from dba_registry
where COMP_ID = 'XDB'
Oracle XML Database
Regards -
Error installing or uninstalling iTunes 8.1
I had iTunes 8.0 installed and running successfully for a while and went to upgrade to 8.1. Every time I try and upgrade it, completely re-install it, r even uninstall it, i get the error "The installer has encountered and unexpected error installing this package. This may indicate a problem with this package. The error code is 2324." I e-mailed apple support and got the worst feedback I have ever gotten from anyone. All they did was send me a link to the forums. Anybody know how to fix this?
If I use the control panel to uninstall ITunes it also asks for a CD-ROM.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Issue while installing web dispatcher
i am trying to install web dispatcher , i am facing a issue in SAP host agent.could you please help me resolve this issue.
SAP NetWeaver 7.0 including Enhancement Package 3 > Standalone Engines > Web Dispatcher > Web Dispatcher Installation( Last error reported by the step: Installation of SAP host agent using command "C:\Program Files\sapinst_instdir\NW703\STANDALONE\AS\WI\hostagent\saphostexec.exe" -upgrade failed with return value 1. Output was:
Upgrade service [OK] No upgrade necessary [ERROR] Open of service SAPHostExec failed ( The specified service does not exist as an installed service.
Above is error
Regards,
Manoj JHello Both,
issue has been resolved . i have started saphostagent via command saphostagent -install.
it started host control.
Thank you
could you please let me steps after installing sap web dispatcher in standalone system and how map it to HTTP request.
Regards,
Manoj J
Maybe you are looking for
-
I have the serial number but my disks were lost due to a car fire. I tried the serial number with Adobe 6 but it doesn't work. I would really appreciate any help.
-
Bluetoothdemo "can't load images"
Hi, i am currently trying this bluetoothdemo on SE k750 and SE c903 and everything seem to be ok except when i try to load the published image. i get "Can't load images". Any advices would be grateful. thanks.
-
802.1X with IP Phone is posible with Nortel??
Hello, My Scenary is that I have configured 802.1X in Cisco Swithches C3750/C3560/C2960, I configured 802.1x in the all Switches, but i have 100 IP Phone Nortel with 2 ports one port connected to Switch and the other port connected to PC. I know that
-
Oracle 10g AS configuration file tutorial
Is there any site from where I can get tutorial about oracle 10g AS configuration file? I have to modify the configuration file according to my application need.
-
Limitations of Web Application Designer
Hi WAD gurus, I have some pages which I made using DreamWeaver which have some check boxes, hyperlinks and some dropdowns. Now I imported them in WAD but the problem is I can't write any query based on check boxes/hyperlinks/dropdowns. Also, I want t