802.1X with IP Phone is posible with Nortel??

Hello,
My Scenary is that I have configured 802.1X in Cisco Swithches C3750/C3560/C2960, I configured 802.1x in the all Switches, but i have 100 IP Phone Nortel with 2 ports one port connected to Switch and the other port connected to PC. I know that IP Phone Cisco work in the enviroment 802.1X, this feature i can configurate enable Radius (Cisco IOS/PIX 6.0) and in the group i have setup in the tab "[009\001] cisco-av-pairbut" put "device-traffic-class=voice" and in the tab IP Assignment i put "Assigned from AAA Client pool" in the case of Nortel how i do? is similar?? i have to setup in the "[009\001] cisco-av-pairbut" the same way??? and i've seen a configuration with cisco in the link:
http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a00808abf2d.shtml#MDA
and the other configuration with Avaya and Radius non cisco.
Please help me with this issue.
Best Regards
Alvaro

From the backend perspective, you can treat Nortel and cisco phones identically in this regard.
The doc reference from before should work for any type of phone.
Hope this helps,

Similar Messages

I lost the USB cable that came with my phone (wt19i Live With Walkman)

I lost the USB cable that came with my phone (wt19i Live With Walkman). However, the charging power adapter still here.
I don't have any other cable.
My phone's USB port use Micro-B connector.
If I buy a high quality USB cable with Micro-B connector, will it be compatible for both charging and data transfer?
Is it necessary to buy the original Sony Ericsson USB cable? If yes, which model should I buy?

http://www.sonymobile.com/gb/support/contact-us/
Contact them and they should be able to help you
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

HT201328 after clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

After clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

Hi Tonma,
Sounds like your device is in recovery mode. Follow the instructions in this article:
http://support.apple.com/kb/ht1808
Cheers,
GB

Is possible to connect a Remote Ressource with Windows Phone 8.1 ?

I am trying to connect the my mobile with Windows Phone 8.1 with a remote ressource (and not remote PC). The address is something like "https://xxx.xxxx.xx/...". This connection is possible wiith Androïd and Mac. Here I don't fond it.

Hi,
Current versions of Microsoft Remote Desktop Preview for Windows Phone 8.1 do not support connecting to Remote Resources. I will help to forward your concern to the product group.
Best Regards.
Jeremy Wu
TechNet Community Support

Wireless VoIP roaming - getting an 802.11g phone to roam with CCX / CCKM

Hello,
Our group is facing a pretty difficult issue at the moment, we are trying to deploy a wireless Avaya VoIP phone at one of our sites in Australia.
The site in question is located in Western Australia, which is on the other side of the continent to where our 5508 WLC is (in Sydney), so there is a latency of abouy 60-80ms between the sites. When testing the phone at the Sydney location, we're able to authenticate the phone via a number of methods (802.11x, 802.11x FT) and the phone can roam fine. When testing at the WA location, the 802.11x authentication method drops the call when roaming, and the 802.11x FT authentication method has about 2 seconds of dead air during roaming / reassociation.
The avaya phone supports a few different methods of "fast handoff" - CCKM and OKC - and we've only got the OKC (802.11 version of fast transition) method to work, not CCKM. The phone reports error messages when trying to connect to the network with CCKM enabled - specifically "No CCKM AP's" and "No CCX AP's".
So I have some questions...
1) Is a 60ms latency between sites a dealbreaker for wireless voice usually?
2) The voice engineer is convinced that CCX is disabled on the WLAN. My understanding of CCX (according to online Cisco docco) is that it can't be switched off. Is this the case? I know CCKM can be disabled (in the Layer 2 Authentication options) but can CCX or CCKM be enabled / disabled anywhere else?
3) The voice engineer has a point on one front - if we do a command "show ap ccx rm [APName] status", the command outputs "Beacon Request ..... Disabled." This seems to be related to CCX Location awareness - but even after switching this on in the WLC (both globally and for the WLAN), I cannot get this to enable.
3) We have had some minimal success getting the phone to connect with only CCKM Authentication enabled. The phone could not roam. When we did this, I looked at the Client information in the WLC of this device and the CCX Version read "Not Supported." Does this perhaps mean some kind of CCX compatibility problem?
4) Is there much of a difference between OKC (Fast Transition) and CCKM in terms of roaming time? I.e. are we better off trying to install a WLC at the location rather than getting this work remotely.
We're a bit lost on this. Anyone that's had experience in getting Wireless VoIP phones to roam on a wireless campus before, particularly where the WLC is remote, I'd love to hear from you.
Thanks,
Dave

Hi, thanks Steve. Aironet IE is enabled.
The encryption is news to me. We intially tried WPA2/AES & WPA/TKIP together but had no success at all. We then moved to WPA/TKIP, and we were able to get the phone to connect to the WLAN using the CCKM settings, but it doesn't roam at all & the WLC reported the Clients CCX version was "Not Supported".
I think the phone has CCX version 4. Are you certain that the phone will only support WPA & WPA2 with CCX v5? Just that this sounds a little strange, the phone's documentation claims to support CCKM, but if you're right then there's no way we can secure our phone conversations? In previous testing, we did actually temporarily drop all authentication / encryption and the roaming worked perfectly.
Thanks for your help...

MAB and 802.1x issues with IP-phone

I'm trying to use 802.1x to authenticate clients on my network with dynamic VLAN assignment from RADIUS. We have IP-Phones(powered by PoE) that only supports EAP-MD5, and we would rather use MAB(it also uses LLDP-MED for some settings) to authenticate the phones using the MAC-range from the phones vendor. The following scenario works perfect:
Connect the phone and let it boot up(takes a while) and authenticate with MAB.
Connect a computer in the phones data-port and let it authenticate with 802.1x(or fail and reach guest-vlan)
However, the following scenario doesn't work:
The computer is already connected to the phone
The phone is then connected to the switch
What happends now is that the computer is authenticated using 802.1x before the phone boots up and get's authenticated with MAB. When the phone is ready, it's authenticated with MAB and everything works. However, after a short period(let's say a minute), using `debug authentication all`, we see a "NEW LL MAC: phones mac" message(which is weird since the mac has already been MAB-authenticated), and then we are unable to contact the phone using ping. When I check `show mac address-table` it has now moved the mac from `Port Gi 0/12` to `Port Drop`. However, if I check `show mab interface Gi 0/12` or `show authentication sessions` it lists the phones-mac as `mab auth sucess `.
Can anyone explain why the first scenario works, and not the second?
The switch is a 3560E PoE 24p with IOS 12.2.58SE2. Sample of the switch-config:
network-policy profile 1
voice vlan 90
interface GigabitEthernet0/12
switchport mode access
network-policy 1
authentication control-direction in
authentication event fail retry 1 action authorize vlan 60
authentication event server dead action authorize vlan 60
authentication event no-response action authorize vlan 60
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication order mab dot1x
authentication priority mab dot1x
authentication port-control auto
authentication periodic
authentication violation replace
mab
dot1x pae authenticator
dot1x timeout tx-period 5
dot1x max-reauth-req 1
spanning-tree portfast
Btw, when we tried authenticating the phones using 802.1x too (EAP-MD5), there are NO problems in any of the scenarios. However, we want to use MAB instead of 802.1x to avoid the requirement of configuring the phones with a username and password. The RADIUS response was the same when using 802.1x as it is with MAB for the phones (including device-traffic-class=voice AV-pair).

Hey. Yes, as specified in the last sentence in my post, the phone is placed in the Voice Domain, and both RADIUS and LLDP-MED (network policy profile 1) specifies voice vlan as 90.
The weird thing is that everything works fine if both use 802.1x, and that there is only a problem when phone(using MAB) already has the computer connected to it, when the phone is turned on(connected to PoE-switch). It must be because the computer boots up and authenticates first I think.
The phones are Snom 821.

802.1x with alcatel phone with cisco acs 5.0

Hi All, can any one has done the implementation of 802.1x with alcatel phone where pc will be behind the phone and cisco switch ports are configured as trunk. Trunk native vlan is data vlan for pc and trunk carrying voice vlan.
when trunk mode is enabled I can not configure 802.1x on trunk interface. does any one help me to get rid of this situation..
Thanks

Hi,
Did you find any solution?. Did you tried with the command switchport voice vlan?.
Regards,
Mauricio

When I try to charge my iphone there is a message with an yellow triangle saying: recharging is not posible with this kid odf acessory. I want to know if the trouble is in the charger or in the phone.

When I try to charge my iphone a message appears saying: This recharging is not posible with this kind of acessory and an yellow triangle. I don't know if the troble is in the charger or in the cel phone. There is someone who can help me?

Hi marmello,
If you are having a charging alert message on your iPhone, you may find the following article helpful:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
- Brenden

Why does only the USB cable that came with my phon...

I recently acquired a Nokia Lumia Icon from Verizon. I have a Lenovo Yoga Pro 2 computer running Windows 8.1 with the Windows Phone App for Desktop (WPA4D) installed. I had a very difficult time getting my Icon to be seen by my computer when connecting it with one of the half dozen micro USB cables I have laying around. WPA4D would not recognize it. Then, I connected it using the USB cable that came with the phone, and WPA4D immediately recognized it. Then I unplugged it and went back to a different cable - it was again not recognized.
What is different about the USB cable that ships with the Nokia Lumia Icon? If I want to order more, like from Monoprice, what do I order to get the same thing? Why is Nokia (apparently) using some sort of proprietary cable??
Thanks,
Eric

It is not proprietary.The charging/data cable for my GPS works.
A lot of the cables are just for charging and that is all they are wired for and they don't even have the data pin. Full size USB cables are the same way.
If I needed an extra I would get it from Nokia.

When I save photos or videos from my iPhone 4S to my PC they are all sideways. Is there a way to prevent this from happening? All are taking with the phone in portrait mode.

When I save photos or videos from my iPhone 4S to my PC they are all sideways. Is there a way to prevent this from happening? All are taken with the phone in portrait mode.

Shot videos ONLY in landscape. For photos choose what's you like. Maybe you have to rotate photos on PC. What's your operating system?

HT4527 Followed all steps - phone not syncing with new itunes/new pc

I have followed the steps in this article for moving itunes to a new computer. I had no problems with loading my music, itunes folder and mobilesync backups to an external drive and copying them all to a new pc. (Windows 8). Installed itunes onto the new computer and plugged in my phone and restored with last backup. All went well with that. The computer is authorised with my account.
THE PROBLEM: Now when I plug in my iphone 5 to new itunes/ new windows 8 pc, it does not sync. It goes through 3 of 3 steps in about 2 seconds saying syncing, but not really syncing. I tested by adding a new app through the itunes and then synced phone. It didn't add it to the phone. Then I deleted it and added an app to the phone through the app store on the phone. When I synced the phone itunes failed to recognize a purchase on the phone that needed to be added to itunes.
So the itunes and phone are not actually in sync with each other and I don't know how to correct that. I have an ipad with retina display which needs to be added but I don't dare until I figure out what the problem is with syncing the devices to the new itunes/computer. It sees my phone when plugged in - I see my 4 pages of apps on the apps tab. I do not see my email accounts listed on the INFO tab. It just says "your contacts/calendars are being synced with your phone over the air." In the block where my accounts were listed on the old itunes/computer it is empty on this one. The phone is continuing to download email though.
Any help in getting the phone and new itunes in true sync again would be much appreciated!

Same problem with a mac. My computer will recognize the iPod on the desktop and itunes even opens up when I plug it in, but the iPod doesn't appear on the iTunes menu and won't let me sync.

Problems with IP Phones registration to CUCME on SG200-50P

Problems with IP Phones registration to CUCME on SG200-50P
System setup:
- Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
   with HWIC-4ESW
- Switches:
   - old - SLM224P
   - new - SG200-50P (SLM2048PT), OS v1.3.2.02
- IP Phones 7911 and 7931, OS v8.4.2
One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
Network diagram:
C2811---HWIC-4ESW---SWITCH---IPPhones
Problem description:
1. In the old setup with SLM224P everything works fine.
   Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
2. When switch is changed to new SG200-50G:
   - ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
   - ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
   - after reconnecting the old SLM224P situation backs to normal
Things that have been checked or tried without success:
- ports speed and duplex auto, correct detection - although not tested with manual settings
- CDP/LLDP on/off
- smartport mode auto and most static settings, also with disabled smartport
- power cycle / reset
- spanning tree and port security settings
- solutions from that post - https://supportforums.cisco.com/thread/2232161
None of the above methods worked.
The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
Please advice.
Thanks in advance.

1 - You have created the voice vlan?
Nope, flat network, one ip subnet (10 hosts and 10 phones)
2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
Yep, phones are connected to untagged access ports of the one and only vlan
3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
The switch was pretty much in default out-of-the-box config (beside management parameters).
4 - When rebooting the switch, you did ensure to save the start up to running config?
Yes, running to startup
5 - Have you manually set spanning tree PORT FAST for the phone ports?
No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles.

How do I change phone numbers associated with an iPad?

How do I change phone number associated with my iPad?

Obviously you must have an iPhone in order to associate the phone number with the FaceTime and Messages apps on your iPad. You haven't clearly stated what you want to do other than associate a phone number, so I assume these are the two apps that you want to associate the phone number with.
If you are unable to add the phone number in the settings in either or both of these apps, you may have to sign out of both apps on the Phone and the iPad - and then sign in again on both devices in order to use the phone number for FaceTime and Messages on the iPad.
This kb article explains how to do this in more detail.
http://support.apple.com/kb/HT5538

1.4 - Important sites will not work & why are the AIM / Facebook contacts integrated with my phone contacts?

Two issues I am having with my phone.
1 - Before upgrading to the 1.4 software patch, I was able to visit some sites that I use regularly, one being www.hotschedules.com. I bartend and use my phone to look at my weekly schedule but now it will not work. Just to test it, I used a buddies phone who had not upgraded to 1.4 and the site opened JUST FINE!
2 - I want to use facebook and AIM on my phone but for some (stupid?) reason, ALL of my facebook and aim contacts get listed in the SAME LIST as my phone contacts. I do NOT want to scroll through hundreds of contacts to find someone. Yes I know there are shortcuts but why even do this in the first place?

Hello eculley and welcome to the forums;
I attempted the website you mentioned, and it loaded fine on 1.4.1.1 on my Sprint Pre. We did identify some issues with websites on 1.4, and this should be resolved with 1.4.1. I know 1.4.1 is not available for Verizon yet, however it should be available soon.
As for Facebook contacts, they show in the Synergy contact list by design, so that you can see all of your contacts in one master list. If you do not want those contacts showing in your Contacts app, you can open Preferences & Accounts for contacts and remove any account you don't want to see contacts for.
Hope this helps!
TreoAide

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

802.1X with IP Phone is posible with Nortel??

Similar Messages

Maybe you are looking for