Error: "Invalid string or buffer length" when using SQLColumns!

I am calling SQLColumns through the Oracle ODBC driver to get the column information of a table. The Client version is 9.0.1.0 and the ODBC driver version is 9.0.1.8. If I am querying a table that does not has a long table name, fine; if I am querying a long table name, failed and reporting:
[Oracle][ODBC]Invalid string or buffer length.
Tried with MS Oracle driver, no problem. Anybody can help?
Thanks in advance.

the name is very long, like 'aaaabbbbccccddddeeeeffffrrrrdddaaa'. Maybe more than 20 charactors. I haven't find the exact number, before which SQLcolumns works, after which SQLColumns stop working.

Similar Messages

ERROR reports.reportdefinition : com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length

I have developed Java web application which uses Crystal Report 2013 , java 1.6 , Windows 32 bit System, All the reports are loading fine in the Following environment
Development Environment
Windows7 Professional Service pack 1 -32 bit
Java - 1.6
Internet Explorer 11
Oracle Client 10g 32 bit ODBC driver
Testing Environment
Windows Server 2008 R2 Enterprise - 64 bit
java 1.6
Internet Explorer 9
Oracle Client 11g 62 bit ODBC driver
While loading reports in the 64 bit server the error occurs
ERROR reports.reportdefinition : com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
ERROR dataengine.datasource : Failed to read next recurring database record: database row set error.
com.crystaldecisions.reports.reportdefinition.datainterface.j: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
    at com.crystaldecisions.reports.reportdefinition.datainterface.q.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.m(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.l(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
    at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.ab(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.if(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.h(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.h(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.void(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.aE(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
    at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
    at com.erm.controller.ALMReportsController.queryDll(ALMReportsController.java:1681)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.springframework.web.servlet.mvc.multiaction.MultiActionController.invokeNamedMethod(MultiActionController.java:471)
    at org.springframework.web.servlet.mvc.multiaction.MultiActionController.handleRequestInternal(MultiActionController.java:408)
    at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
    at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
    at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:925)
    at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:856)
    at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:936)
    at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:838)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:643)
    at org.springframework.web.servlet.FrameworkServlet.service(FrameworkServlet.java:812)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at com.erm.authentication.HttpSecurityFilter.doFilter(HttpSecurityFilter.java:658)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:88)
    at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:861)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:606)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
    at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
    at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.l.bN(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.eg(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.e(Unknown Source)
    at com.crystaldecisions.reports.queryengine.b2.f(Unknown Source)
    at com.crystaldecisions.reports.queryengine.b2.dy(Unknown Source)
    ... 89 more
Caused by: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
    at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbc.SQLGetDataString(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcResultSet.getDataString(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcResultSet.getBigDecimal(Unknown Source)

A few things to note:
1) Crystal Report 2013 doe snot install any SDK. Thus the assumption is that you are using CR from teh following link:
SAP BusinessObjects - SAP Crystal Reports, Version For Eclipse Download
2) Since you are using a 64 bit connection (Oracle Client 11g 62 bit ODBC driver) you will have to make sure you are using 64 bit JVM. Otherwise, follow Dell's advice and use a 32 bit ODBC datasource.
3) On one test you are using Oracle Client 10g 32 bit ODBC driver and the other you are using Oracle Client 11g 64 bit ODBC driver. You might want to see if you can run your app using Client 11g 32 bit ODBC driver.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Keep getting an error message when trying to send some texts to valid numbers, "Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.

Does anyone know why I keep getting an error message, "Error invalid number. Please re-send using a valid 10 digit mobile number or valid short code. The numbers I'm texting to, are valid numbers.

Did you ever get resolution to this problem?
My coworker has the identical issue, including the number (+1 (1)(216)116-11) in the error reply.

Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code

Hey, so my friend got a Galaxy s6 edge yesterday and gave me his new number. When I tried texting it I received this immediately after:
Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. Hey
I can receive messages from this number as well as calls. I've become aggravated and am not sure what to do. Please help, thanks!

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

BW error: "invalid call sequence for interface when recording changes"

I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.

I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks.

Is there a way to adjust the frame length when using a FFT

Is there a way to adjust the frame length when using a FFT?
Thanks,
David

I thought that to have a longer frame rate you just need to have a longer sample set.

TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Why its showing error : Invalid Object Name 'table name' when we try to insert data ?

Hi,
    When i try to insert data in the database with the following query
                con.Open();
                cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
                cmd.ExecuteNonQuery();
                MessageBox.Show("Insert success");
                con.Close();
    its showing following error Invalid Object Name 'good'

Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Error out from MB01 and MIGO when using BADI "INSPECTIONLOT_UPDATE"

Hi all:
We are currently implementing Quality Level with Dynamic Modification Rule using SAP Quality Management module.
We are trying to change stage level by modifying the field PRSTUFENAE of the table QDQL (Material Quality Level) using BADI: INSPECTIONLOT_UPDATE, new logic is successful for a goods receipt with a single lot if we use COMMIT WORK within BADI, but an error occurs from MB01 and MIGO when we are receiving multiple lots in same goods receipt.
Have anyone else got across something similar?
Thank you in advance,
Regards
Daniel Guillen

Hi Paul,
First of all, there is a How To Guide for RUNLOGIC implementation. It uses BAdI approach as well, but doesn't call WRITE_BACK that can change from version to version.
Second, you should be able to see that method GET_DELTA is being called under
IF D_CALC_DELTA eq abap_true and df_bw_delta eq abap_false.
D_CALC_DELTA is set to TRUE only in Method WRITE_BACK_INT; I hope you aren't using that one.
DF_BW_DELTA is taken from DM Package parameters. Can you check what you have there or put just a break-point in PACKAGE_LOGIC_1 to see what value those 2 variables have?
Hope this helps,
Gersh

Error Generated by DIO Port Read when using a compilied Operator Interface

When using a compilied version of an TestStand Operator interface, a Vi that reads the status of a port on a PCI-6602 board stops working. Within this VI a sub VI called Read DIO Port brings back an error -10007. But when I use the un compilied version of the operator interface there is no problem with the VI.
Why is this so?
Attachments:
Get_SIU_Switch_States.vi ‏58 KB

I have tried to simulate this issue and I have not been able to replicate your issue.
I know the -10007 occurs when you try and create/use a resource index that is not possible i.e if your referencing channel 9 and the device only has 8 channels.
Have you managed to overcome this issue yet?

Error adding buffer entry when using Asynchronous mode of JRA and JCO call

Enviroment: XMII 12.1.4 / CE EhP1 SP03
When I using SAP JRA Function Call or SAP JCO Funciton Call in transaction, it works well when I choose 'Process Type' as 'Synchronous processing' in 'Data Buffering Configuration' tab. But when I use 'Asynchronouse processing' it doesn't work.
I check the Netweaver logs, there some logs like following:
Error adding buffer entry (com.sap.xmii.dataqueue.DataBufferManager)
Couldn't add buffer entry (com.sap.xmii.dataqueue.DataBufferManager)
ManagedConnectionImpl.dissociateConnections(), dissociation of a non-cci transaction, H1, C1(com.sap.mw.jco.jra)
how could I solve this problem?

Solved after deploy 12.1 SP05 (xMII 12.1.5 build 91)

String length when using CHNAVERAGE

Hi all,
I want to average quite a number of non-waveform channels and ran into the problem, that the CHNAVERAGE function only accepts a 255byte long channel string. Working around it by using the "'[1]/Channel 1-'[1]/Channel X" syntax does not help, because channels are not in consecutive order.
Any Ideas???
Regards,
David
... using Diadem 10

Hi DavidS!
There is not any longer a length restriction in DIAdem 10.1 or newer.
May be a workaround in DIAdem 10.0 is to use channel numbers instead of channel names which increases the maximum number of channels you can specify in a 256 byte long string. Alternatively you may rearange the channels in the portal and then call the ChnRenumber function to bring the channels in consecutive order.
I hope this helps,
Christian

How to encode sql string for SQL Server when using JDBC?

in code, dynamically generate sql stirng like:
String sqlstring = "select column from table where column=' " + var + " ' ";
Question is: if var include char ' , it will cause error becuase ' is reserved by SQL Server for string reference.
So how to encode string for dynamic sql string? for example, following sql(when var =" I'm tester"):
select column from table where column like ' I'm tester '
Edited by: KentZhou on Jun 17, 2009 3:10 PM

Use PreparedStatement. Use it all the way. It not only saves you from SQL injections, but also eases setting non-standard Java objects like Date and InputStream in a SQL statement.
Prepare here: [http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html].

Error in WEBI report and MDXTEST when using Dimensions in Prompt

Hi,
I am using BOXIR3.1 SP2, SAPBI 7.0
I m creating a webI report (Universe is on SAP BI Query.) which include following objcets in Query section of WebI pannel:
Business partner, Account Class, Total Arreas count.
The Condition pane of Webi Includes Prompt on object "Account Class".
When I run a report, I get List of values for Dimension Account Class, when I select one of available value eg: Commercial Customer,I get Following Error.
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] } ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[Commercial Customers] } ) ON ROWS FROM [ZFC_M07/Z_FC_M07_Q002] failed to execute with the error Value Commercial Customers for characteristic Z_FCACTBP__0UCACC_CLAS unknown. (WIS 10901)
I tried running same query in MDXTEST editor of BI. I got same error!!!
Then I tried changing the MDX Query as:
SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] }
ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[COM] } ) ON ROWS
FROM [ZFC_M07/Z_FC_M07_Q002]
Then it worked Fine!!! If you observe the change is in the value of Prompt Account Class [Z_FCACTBP__0UCACC_CLAS].[COM]
By default Dimension object in Universe shows text value, but when I changed the MDXQuery with Key value (This is one of the value of value is for [Z_FCACTBP__0UCACC_CLAS].[Level01] object in mDX test Editor.) It works fine.
I wonder How do i solve this problem!! List of values available in dimension cannot be changed at universe level.
Please let me know if any solution for this exists.
regads,
Nisha.

Hi Ingo,
I am creating the prompt on the dimension "Account Class" at WebI level.
The Technical name of this object is: [Z_FCACTBP__0UCACC_CLAS].[LEVEL01]
Also,
I confirmed that Index Awareness is applied on this dimension as [Z_FCACTBP__0UCACC_CLAS].[LEVEL01].[TECH_NAME].
This Dimension has detail object called "Account Class (Key) "and "Account Class (Medium name)".
MDXtest editor in SAP, shows me text as well as [ Level01] values:
Eg: Account Class InfoObject has values "Commercial Customer " (This is text value)and "[Z_FCACTBP__0UCACC_CLAS].[COM]".
COM Refers to Commercial Customer .
So In WebI when I use Dimension "Account Class" as prompt, I get Text value of this InfoObject which is "Commercial Customer ".
and MDXQuery Fails. But when I modify this query in mDXTEST Editor with value as "[Z_FCACTBP__0UCACC_CLAS].[COM]", It work fine.
I donu2019t understand the reason, since this problem is with almost 90% of Dimension object.
When I delete this object from universe, and refresh the universe then webI works fine.
But, if for some reason I refresh the universe again, the Dimension object as a prompt doesnu2019t work!!!
This error occurs every time I refresh the universe.
We are in UAT phase and soon to go Live!! We cannot afford to delete the object every time I refresh the universe.
Please let me know your inputs.
regards,
Nisha.
Edited by: Nisha Makhija on Oct 15, 2009 4:56 PM

Error: "Invalid string or buffer length" when using SQLColumns!

Similar Messages

Maybe you are looking for