Error Generated by DIO Port Read when using a compilied Operator Interface

When using a compilied version of an TestStand Operator interface, a Vi that reads the status of a port on a PCI-6602 board stops working. Within this VI a sub VI called Read DIO Port brings back an error -10007. But when I use the un compilied version of the operator interface there is no problem with the VI.
Why is this so?
Attachments:
Get_SIU_Switch_States.vi ‏58 KB

I have tried to simulate this issue and I have not been able to replicate your issue.
I know the -10007 occurs when you try and create/use a resource index that is not possible i.e if your referencing channel 9 and the device only has 8 channels.
Have you managed to overcome this issue yet?

Similar Messages

Why I get an error when running a sequence using the LabVIEW operator interface ?

I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
Thanks

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program

Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
Matthias

Hello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments

Programatically Loading Several Sequences Using LV Simple Operator Interface

I am playing around with the supplied LV(2009) Simple Operator Interface for running TestStand (4.2) and hoping that someone can point me in the right direction.  I know this may be too generic for a concise solution, but hopefully I can get some suggestions on the best approach for this. Here is a short description of what I am trying to accomplish.
I am testing 2 unique UUTs on a single test fixture that is controlled by a PCI-7831R DAQ. Each UUT will have a unique serial number and report generated. Therefore, I am using 2 unique sequence files created using TestStand. Basically, I want to be able to read in a barcode on the test fixture and have the operator interface load the 2 unique sequence files based on information contained in the barcode. The operator will then hit a button to start the sequence file executions.  I want the first sequence file to run and test the first UUT. Once the first sequence file is finished, I want the second sequence file to load and run on the second UUT.
I can use the simple operator interface to load both sequence files. I then have to select the combo box to select which one I want to run. This works fine, however, I am trying to automate this so that the operator doesn't have to open the files and continually use the combo box to select sequence files.
Any ideas or suggestions would be greatly appreciated.

I have figured out a solution (for my initial application at least) of programmatically loading the sequence files. When the operator interface first starts, there is a prompt where the user will scan a barcode that is loaded on the front of the fixture. For all of our product lines, we will have a unique format for the fixture barcode. Included in this barcode is a product specific software ID number. I create a folder with the same software ID number and store the sequence files there. I then parse the barcode and open all *.seq files in that folder. I have this working correctly now.
Once the sequence files are opened, the user must scan each UUT ID barcode before installing them on the fixture. The intent is to have both UUTs installed on the fixture at the same time so they can be tested serially.  If, however, they do not scan one of the UUTs, it will not be tested. Basically this is due to the fact that they may want to run only a single board. Once all of the UUT barcode scanning has been completed, I have another button that will execute the sequence files using the 'Single Pass' execution entry point. I agree that the 'Single Pass' and 'Test UUTs' points should be hidden from the user. Once the execute test(s) button is pressed, it will check each UUT barcode to make sure that it is valid. If both UUT's have valid barcodes, it will run the first UUT and then the second using the 2 sequence files that were previously loaded, otherwise, it will run only one or the other. The UUT(s) will then be removed and the process starts over again from the UUT ID barcode scanning. They will not have to scan the fixture barcode again since the correct sequence files have already been loaded.
Currently I have the UUT/Sequence File associations hard-coded in the UI. I will need to put my thinking cap on so that as we increase the product lines (several are already in the pipeline) we can use the same UI without any modifications. Scalability is King!

No error generated if batch process load file uses wrong naming convention

Another interesting one...
When using the batch processing functionality of FDM, which can be executed by either:
- FDM Workbench (manually)
- Hyperion FDM Task Manager (scheduled)
- upsShell.exe (scheduled and executed from a batch script)
..., one has to name the data file (to be loaded) using a specific file naming convention (i.e. "A~LOCATION~CATEGORY~PERIOD~RA.csv" format, for example). However, if one does not name the file correctly and then tries to process the file using batch processing functionality using any of the above three methods, FDM happily moves the file out of the OpenBatch folder and into a new folder, but the file is not loaded as it does not know where to map it to (as expected). However, there are no errors in Outbox\Logs\<username>.err to inform the user, so one is non the wiser that anything has gone wrong!
When using FDM Workbench, an error is displayed on the screen (POV - "Batch Completed With Errors, ( 1 ) Files Contained Errors"), but this is the only indication of any error. And normally, one would be scheduling the load using upsShell.exe or Hyperion FDM Task Manager anyway...
Has anyone else noticed this, or am I doing something wrong here? :-)

Yes, as per my original post the only feedback on any POV errors appears to be when using the FDM Workbench Batch Processing GUI.
Regarding the "Batch Process Report in FDM" you mentioned, are you referring to Analysis | Timeline accessible via FDM web client? Unfortunately this does not appear to provide much in the way of detail or errors, only general events that occurred. I cannot locate any batch process report, other than the log output I defined when calling upsShell.exe. However, this contains no POV errors...

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Error out from MB01 and MIGO when using BADI "INSPECTIONLOT_UPDATE"

Hi all:
We are currently implementing Quality Level with Dynamic Modification Rule using SAP Quality Management module.
We are trying to change stage level by modifying the field PRSTUFENAE of the table QDQL (Material Quality Level) using BADI: INSPECTIONLOT_UPDATE, new logic is successful for a goods receipt with a single lot if we use COMMIT WORK within BADI, but an error occurs from MB01 and MIGO when we are receiving multiple lots in same goods receipt.
Have anyone else got across something similar?
Thank you in advance,
Regards
Daniel Guillen

Hi Paul,
First of all, there is a How To Guide for RUNLOGIC implementation. It uses BAdI approach as well, but doesn't call WRITE_BACK that can change from version to version.
Second, you should be able to see that method GET_DELTA is being called under
IF D_CALC_DELTA eq abap_true and df_bw_delta eq abap_false.
D_CALC_DELTA is set to TRUE only in Method WRITE_BACK_INT; I hope you aren't using that one.
DF_BW_DELTA is taken from DM Package parameters. Can you check what you have there or put just a break-point in PACKAGE_LOGIC_1 to see what value those 2 variables have?
Hope this helps,
Gersh

Email entering inbox as read when using Outlook Connector

When using Outlook Connector (R 9.0.4.1) with Outlook 2003 all mail that is received has the header:
'This message has not been sent.
The message will be sent via Oracle Connector for Outlook.'
All mail that is received is also marked as read.
When Outlook connector is removed there is no problem.
I haven't found any settings within Outlook that would help.
Has anyone else experienced this problem, or have any ideas what is causing it?

Hi,
Don't know if you meant it literally, but OCFO only started supporting Outlook 2003 with 9.0.4.1.11, not 9.0.4.1. Perhaps this is part of the problem.
Regards,
Francois Perrault

Raw HTML data in reply box instead of formatted text when using forums or webmail interface

At work, we use an internal webmail service with SmarterMail Enterprise 5.5 to communicate. Since upgrading to FF6, the reply text area no longer shows formatted text, and instead just shows the raw HTML code of the message you're typing. The size of the message box area is also reduced to about half what it used to be.
Text formatting also does not function on several message board forums around the internet. Seen many others complain about the same.
This did not happen in Firefox 5, and does not happen now in Chrome or IE8. Something about FF6's handling of webmail interfaces and forums or the handling of an extension that affects a webmail interface or forum is off.
Any help?

AFAIK, no. Acrobat/Reader will only generate plain-text emails.

Cube Solve Time when using MAX Aggregation Operator

Hello,
We have created a cube to implement the count distinct measure we need.
The cube contains only one measure (COUNT) and uses the MAX operator to aggregate across all other dimensions except for the one we want to count (which uses the SUM operator). We have set the precompute percent to 60% for the bottom partition and 0% for the top partition. The cube is compressed.
The problem is that the SOLVE step for a partition when performing a COMPLETE cube build, seems to be taking a very long time and is taking up huge amounts of TEMPORARY tablespace.
We have succesfully created another cube with the same dataset which uses the SUM operator across all dimensions.
This cube build was completed in a reasonable amount of time even though we had 5 stored measures and 80% aggregation for the top partition.
Is this behaviour expected when using MAX operator?
Thank you,
Vicky

Thank you, David.
As you said we are using mixed operators because we are doing a distinct count.
We will try setting the precompute percent to 35%,although I'm a bit worried about the query performance in this case.
Neelesh, I think that Atomic Refresh was set to TRUE during the last refresh but the cube was the only object in the build script.
No other cubes or dimensions were maintained in the same build so I don't think it could have affected the use of TEMP tablespace.
Generally we don't use Atomic Refresh.
Thank you,
Vicky

Gmail: Mails sent to myself are marked as READ when using IMAP -how to fix?

I just started using IMAP with my Gmail account and Apple Mail. But when I send an e-mail to myself (from my imap account to my imap account), the e-mail will of course go to my inbox but it will be marked as read.
I don't have the option to "mark as unread" in either Apple Mail rules or Gmail filters, they both only have "mark as read".
If I do it using Gmail webmail, then the e-mail is not marked as read, so I don't know if it's something Apple Mail is doing to my email? If I right-click it and "mark as unread", the message will be marked as unread both in my "inbox" and in my "sent mail". But I don't want to right click all my "to do mails" to make sure I see them.
(I'm aware this is not the best workflow, but I like it..)

Alas, I'm still having problems with Gmail. Now what happens is that I'm getting the "caution" triangle next to the account which indicates a problem. The error message when I click on that triangle is: "Unable to Connect There may be a problem with the mail server or network. Check the settings for account “Gmail” or try again. The server error encountered was: The connection to the server “imap.gmail.com” on port 587 timed out."
Also, something else is strange. When I look in the account settings window, my password is not there. It's blank. So I enter it. A few minutes later, when I check, my password is again no longer there.
Regarding your suggestions to move the mail folder, I really don't want to do that because I have about 20 mailboxes full of important saved messages. I can't afford to lose those. Surely there must be some other way?
Leopard is the worst OS upgrade in Apple's history, IMO. It's caused more problems for me than I could have imagined.

Failure to generate WSDL from web service when use xmlbean

Hi, I have a web service that uses xmlbean generated by schema. The schema from 3rd party is in a separate project since it's used by another web app and ejb project. In wlw103 I have included the schema project in this web service project's Java Build Path. The web service compiles, but when I tried to generate WSDL a Error window shows and says "The WSDL cannot be generated from the web service due to unexpected runtime errors".
The following is the detail. What do I need to do to make the xmlbean available for my web service? Thanks
com.bea.workshop.webservices.core.gen.WebServicesException: weblogic.wsee.tools.jws.build.CompileException: Error compiling web service: C:\workspace\ws\src\myPackage\testWS.java
     at com.bea.workshop.webservices.core.compiler.WebServiceCompilerImpl$3.invoke(WebServiceCompilerImpl.java:335)
     at com.bea.workshop.webservices.core.compiler.WebServiceCompilerImpl.accessCompiler(WebServiceCompilerImpl.java:390)
     at com.bea.workshop.webservices.core.compiler.WebServiceCompilerImpl.compile0(WebServiceCompilerImpl.java:330)
     at com.bea.workshop.webservices.core.compiler.WebServiceCompilerImpl.compile(WebServiceCompilerImpl.java:275)
     at com.bea.workshop.webservices.ui.actions.GenerateWsdlFromJwsAction.run(GenerateWsdlFromJwsAction.java:169)
     at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
Caused by: weblogic.wsee.tools.jws.build.CompileException: Error compiling web service: C:\workspace\ws\src\myPackage\testWS.java
     at weblogic.wsee.tools.jws.build.JwsCompiler.buildWebServices(JwsCompiler.java:526)
     at weblogic.wsee.tools.jws.build.JwsCompiler.compile(JwsCompiler.java:483)
     at com.bea.workshop.webservices.core.compiler.WebServiceCompilerImpl$3.invoke(WebServiceCompilerImpl.java:333)
     ... 46 more
Caused by: weblogic.wsee.tools.WsBuildException: weblogic.wsee.bind.buildtime.BindingException: ERROR ! could not add Xml Schema Type for XmlBean named '\[com.domain.UserDocument\]'. This is completely unexpected and might be caused by missing *.xsb and *.xsd files in the build environment. The building and running of this Service is likely to FAIL.
     at weblogic.wsee.tools.jws.jaxrpc.JAXRPCWebServiceInfo.createBindings(JAXRPCWebServiceInfo.java:227)
     at weblogic.wsee.tools.jws.wsdl.WsdlBuilder.processImpl(WsdlBuilder.java:43)
     at weblogic.wsee.tools.jws.jaxrpc.JAXRPCProcessor.process(JAXRPCProcessor.java:27)
     at weblogic.wsee.tools.jws.process.CompositeProcessor.process(CompositeProcessor.java:47)
     at weblogic.wsee.tools.jws.build.JwsCompiler.buildWebServices(JwsCompiler.java:522)
     ... 48 more
Caused by: weblogic.wsee.bind.buildtime.BindingException: ERROR ! could not add Xml Schema Type for XmlBean named '\[com.domain.UserDocument\]'. This is completely unexpected and might be caused by missing *.xsb and *.xsd files in the build environment. The building and running of this Service is likely to FAIL.
     at weblogic.wsee.bind.buildtime.internal.SoapAwareJava2Schema.bindAsExplodedTylar(SoapAwareJava2Schema.java:1414)
     at weblogic.wsee.bind.buildtime.internal.TylarJ2SBindingsBuilderImpl.createBuildtimeBindings(TylarJ2SBindingsBuilderImpl.java:216)
     at weblogic.wsee.tools.jws.jaxrpc.JAXRPCWebServiceInfo.createBindings(JAXRPCWebServiceInfo.java:223)
     ... 52 more

HI,
I hope this issue can resolved by adding this patch CR349256
Try to contact weblogic support to get more details about this patch.
Regards,
Kal.

USB port issues when using iphone5

I have recently upgraded to an iphone 5 but whn I connect to my imac (intel/2009) I get error message up saying the usb port is being disabled as the device is drawing too much power. This means i cannot charge the phone from the imac nor connect to itunes. Has oneone else had this issue? can anyone suggest how I can resolve it.
cheers

I'm not sure how the issue can be resolved but I'm having the exact same problem when I try and charge my iPhone5 on both my macbook pro at home and at work. I have no other usb devices in use when this happens and I cannot find a way to rectify it so you're definitely not alone.

ADFc: No view port found when using both Browser dialog and TF inline-popup

Hi,
Using JDev 11.1.1.2.
We have a table with data and two commandlinks. One navigates to a task-flow-call configured to "run as dialog" in a modal inline-popup. This opens a modal inline-popup that can be used to modify the data.
The second command link navigates to view (using the dialog: syntax) that opens a second browser window, displaying a jspx that retrieves an image from a servlet.
Both dialogs can be opened and closed multiple times if I use only one of them in a session, but once I have opened the browser dialog popup, opening the inline-popup gives an exception (see below).
The inline-popup actually shows, but instead of the taskflow inside it it shows "The website cannot display the page".
From debugging the source code, I see that the StateInstanceIdFromRequest (ControllerState:288) when opening the inline-popup is the ctrl-state from the main browser window address bar, r01nnp3js_9.
Then when the taskflow inside the inline-popup is opened, the StateInstanceIdFromRequest is r01nnp3js_13. If I open and close the inline-popup multiple times, this instanceid stays the same.
Until I open the browser dialog window with the second commandlink, the StateInstanceIdFromRequest for the view inside this dialog window is r01nnp3js_31, matching the ctrl-state from the dialog window address bar.
After closing the browser dialog window and clicking the first commandlink, the inline-popup shows but the StateInstanceIdFromRequest for the taskflow inside it is no longer r01nnp3js_13, but r01nnp3js_31!!
This is the InstanceID from the browser window that was closed!! This is incorrect and I think that the wrong StateInstance is looked up (ControllerState:304).
This results in an NPE (ControllerState:330) because the CurrentViewPort (looked up from mAllViewPorts with the wrong currentViewPortContextId) is null.
This is the stacktrace:<ControllerState><getViewPort> ADFc: No view port found with ID 'r01nnp3js_32'.
<ControllerState><getViewPort> ADFc: No view port found with ID 'r01nnp3js_32'.
08-jun 10:53:16 DEBUG     2/avravr001 (MnSessionContextFilter) ----- REQUEST START ----
08-jun 10:54:31 DEBUG     2/avravr001 (MnSessionContextFilter) ----- UNCAUGHT UNCHECKED EXCEPTION DURING REQUEST: NullPointerException, null ----
08-jun 10:54:31 DEBUG     2/avravr001 (MnSessionContextFilter) ----- REQUEST END ----
<8-jun-2010 10:54:31 uur CEST> <Error> <HTTP> <BEA-101017> <[ServletContext@12329770[app:KlantbeeldPME module:KlantbeeldPME path:/KlantbeeldPME spec-version:2.5 version:V2.0], request: weblogic.servlet.internal.ServletRequestImpl@f0f81e[
GET /KlantbeeldPME/faces/adf.dialog-request?_adf.ctrl-state=yg04i5vly_47&_rtrnId=1275987194538&__ADFvDlg__=true&_afrLoop=2956086037750&_afrWindowMode=0&_afrWindowId=_adfvdlg HTTP/1.1
Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, */*
Referer: http://127.0.0.1:7101/KlantbeeldPME/faces/adf.dialog-request?_adf.ctrl-state=yg04i5vly_47&_rtrnId=1275987194538&__ADFvDlg__=true
Accept-Language: nl
User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Accept-Encoding: gzip, deflate
Connection: Keep-Alive
Cookie: JSESSIONID=H5k3MTDDTCpbCqjPhf1pWyJ2tsl3JBC3PTDXpQVzh8Fx74BJdLk6!1966224151
]] Root cause of ServletException.
java.lang.NullPointerException
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:330)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:101)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     Truncated. see log file for complete stacktrace
>
<8-jun-2010 10:54:31 uur CEST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at 8-jun-2010 10:54:31 uur CEST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = 8-jun-2010 10:54:31 uur CEST SERVER = DefaultServer MESSAGE = [ServletContext@12329770[app:KlantbeeldPME module:KlantbeeldPME path:/KlantbeeldPME spec-version:2.5 version:V2.0], request: weblogic.servlet.internal.ServletRequestImpl@f0f81e[
GET /KlantbeeldPME/faces/adf.dialog-request?_adf.ctrl-state=yg04i5vly_47&_rtrnId=1275987194538&__ADFvDlg__=true&_afrLoop=2956086037750&_afrWindowMode=0&_afrWindowId=_adfvdlg HTTP/1.1
Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, */*
Referer: http://127.0.0.1:7101/KlantbeeldPME/faces/adf.dialog-request?_adf.ctrl-state=yg04i5vly_47&_rtrnId=1275987194538&__ADFvDlg__=true
Accept-Language: nl
User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Accept-Encoding: gzip, deflate
Connection: Keep-Alive
Cookie: JSESSIONID=H5k3MTDDTCpbCqjPhf1pWyJ2tsl3JBC3PTDXpQVzh8Fx74BJdLk6!1966224151
]] Root cause of ServletException.
java.lang.NullPointerException
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:330)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:101)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)What are my options here? How can I influence the ctrl-state of an inline-popup? Can a browser dialog window be disposed somehow and would that matter?
oracle.adfinternal.controller.state.ControllerState is an adfinternal class, what is the best way to hook into this and fix it?
Thanks and regards,
Gerben

Thanks Frank. I'm not sure how to do that, but I'll create a SR on the SID of my customer and refer to this thread.
regards,
Gerben

Error Generated by DIO Port Read when using a compilied Operator Interface

Similar Messages

Maybe you are looking for