Error: libAPPPurchase.a are required to have universal IOS libraries

Hi!
I got this message when I use AIR 17 in Adobe Flash CC 2014, when trying to make an ipa-file. Anyone know what it is actually saying?
Error: libAPPPurchase.a are required to have universal IOS libraries. Please contact ANE developer(s) to get the same.
/Ylva

First off, you'll need a Mac to install xcode and recompile the .a with 64-bit support. You'll need the original source code.
You'll need to set the build architectures to support 64-bit by setting the Architectures setting to $(ARCHS_STANDARD) (this supports armv7 and arm64).
Here's a screenshot from one of my projects:
Then you'll need to re-package the ANE.
Here's a series of articles on ANE development in general that helped me: http://www.adobe.com/devnet/air/articles/building-ane-ios-android-pt1.html
Good luck!

Similar Messages

JDeveloper Error: White spaces are required between publicId and systemId.

I'm using JDeveloper 10.1.3.1.0.
This error is occurring in a BPEL process project.
With one particular web service I have, adding a Partner Link to the BPEL generates the following compile error:
Error: White spaces are required between publicId and systemId.
I can add Partner links from other web services and the BPEL will compile fine. The main difference I can see is that this web service supports WS-Addressing.
I have found one other reference to a similar (but not exactly the same) problem elsewhere in these forums but the fix is not really applicable. All of the wsdl files pass the "Validate WSDL" operation, and I don't see anything wrong with them.
When the error occurs and I select "Go To Source" it points back to the first line of the bpel file.
Can anyone help me out on this?
This is the wsdl for the web service, wsademo.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:MIME="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:DIME="http://schemas.xmlsoap.org/ws/2002/04/dime/wsdl/"
xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<schema targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified"
attributeFormDefault="unqualified">
<import namespace="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<import namespace="http://www.w3.org/2003/05/soap-encoding"/>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademo">
<complexType>
<sequence>
<element name="in" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademo">
<part name="parameters" element="ns:wsademo"/>
</message>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademoHeader">
<part name="MessageID" element="wsa:MessageID"/>
<part name="RelatesTo" element="wsa:RelatesTo"/>
<part name="From" element="wsa:From"/>
<part name="ReplyTo" element="wsa:ReplyTo"/>
<part name="FaultTo" element="wsa:FaultTo"/>
<part name="To" element="wsa:To"/>
<part name="Action" element="wsa:Action"/>
</message>
<portType name="wsademoPort">
<operation name="wsademoResult">
<documentation>accepts a string value from a relayed response</documentation>
<input message="tns:wsademoResult"/>
</operation>
<operation name="wsademo">
<documentation>echos a string value and relays the response to the wsa replyTo address (if present)</documentation>
<input message="tns:wsademo"/>
<output message="tns:wsademoResult"/>
</operation>
</portType>
<binding name="wsademo" type="tns:wsademoPort">
<SOAP:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="wsademoResult">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademoResult"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
</operation>
<operation name="wsademo">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademo"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
<output>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</output>
</operation>
</binding>
<service name="wsademo">
<documentation>demonstrates WS-Addressing capabilities</documentation>
<port name="wsademo" binding="tns:wsademo">
<SOAP:address location="http://localhost:11001"/>
</port>
</service>
</definitions>
This is the wsdl that is generated by JDeveloper that contains the PartnerLinks and refernce back to the original wsdl file, wsademoRef.wsdl:
<definitions
name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>
<import namespace="http://localhost:11001/wsademo.wsdl" location="wsademo.wsdl"/>
<plnk:partnerLinkType name="wsademoPort_PL">
<plnk:role name="wsademoPort_Role">
<plnk:portType name="tns:wsademoPort"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
And finally the is the BPEL, WSAtest3.bpel:
<?xml version="1.0" encoding="UTF-8"?>

<process name="WsaTest3" targetNamespace="http://xmlns.oracle.com/WsaTest3"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://localhost:11001/wsademo.wsdl"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns2="http://localhost:80/Service.wsdl"
xmlns:client="http://xmlns.oracle.com/WsaTest3"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:WsaTest3"
myRole="WsaTest3Provider"/>
<partnerLink name="wsademo" partnerLinkType="ns1:wsademoPort_PL"
myRole="wsademoPort_Role" partnerRole="wsademoPort_Role"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:WsaTest3RequestMessage"/>

<variable name="outputVariable"
messageType="client:WsaTest3ResponseMessage"/>
<variable name="Invoke_1_wsademo_InputVariable" messageType="ns1:wsademo"/>
<variable name="Invoke_1_wsademo_OutputVariable"
messageType="ns1:wsademoResult"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="inputVariable" createInstance="yes"/>

<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:WsaTest3ProcessRequest/client:input"/>
<to variable="Invoke_1_wsademo_InputVariable" part="parameters"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="wsademo" portType="ns1:wsademoPort"
operation="wsademo" inputVariable="Invoke_1_wsademo_InputVariable"
outputVariable="Invoke_1_wsademo_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_wsademo_OutputVariable" part="parameters"/>
<to variable="outputVariable" part="payload"
query="/client:WsaTest3ProcessResponse/client:result"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="outputVariable"/>
</sequence>
</process>
-Wayne Stielau
Open Text Corporation
Irvine, CA

I have discovered two issues.
1. JDeveloper does not seem to like the SOAP 1.2 envelope and encoding namespaces. Is this a known limitation? Changed them to 1.1.
2. JDeveloper does not like the double definition of wsaDemoResult.
When these two items are changed, the bpel compiles clean. Now I've got to get the message header to populate correctly. There are no values assigned, only namespace definitions. This is the SOAP packet that is received at the web service.
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Header>
<MessageID xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<From xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<RelatesTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<Action xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<ReplyTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<To xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<FaultTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
</env:Header>
<env:Body>
<wsademo xmlns="http://localhost:11001/wsademo.wsdl">
<in xmlns="">hello</in>
</wsademo>
</env:Body>
</env:Envelope>

After upgrade to EMET v4.1 and reboot EMET_Agent didn't self-restarted but now double clicking its icon shows error "Admin privileges are required"

Hello all,
after on my Windows XP SP3 test client I upgraded to EMET v4.1 (from v4.0) and rebooted I noticed the following:
- EMET_Agent didn't self-restarted so I had to run it manually (and I noticed that after it started it also self-added an undocumented --NoRestart command line option),
- now that its icon is already in SysTray (Notification Area) the error "Admin privileges are required" appears whenever I double click on it or select 'Open EMET', so in case of need I can run EMET_GUI.exe only manually.
Is all this normal and expected or there can be any other possibly known way to avoid or definitely fix both effects ?
P.S. If to better show effects also providing any bitmap should be needed, then please just let me know.
Thanks in advance for any helpful reply or suggestion. Regards.
Rob

Hello everyone again,
I'm updating this post to ensure anyone interested may know how to definitely solve this issue.
After verifying that same annoying issue was also found with EMET 4.1 update 1 (valid for its 1st 4/30/2014 release, and verified also with
current and latest 5/29/2014 version) I recently made some little more investigation and after noticing its weird command line (reported by Process Explorer) simply as :
--NoRestart
I simply ensured to manually force same option to be properly set at startup, and that's it. :-D
So here you are quick updated versions of :
- EMET41NotificationFix.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"EMET Agent"="\"C:\\Program Files\\EMET 4.1\\EMET_Agent.exe\" --NoRestart"
- EMET41upd1NotificationFix.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"EMET 4.1 Update 1 Agent"="\"C:\\Program Files\\EMET 4.1\\EMET_Agent.exe\" --NoRestart"
I hope this helps (and if it does then please be kind and vote this post as useful... ;-) ) while to some forum moderator I'm asking to kindly mark this post as Answer.
P.S. It's just a pity that latest current version of EMET 4.1.1 (aka 4.1 update 1) cannot easily install over its 1st release (its setup suggest to 1st remove existing version), anyway I've found a tricky (hacked) way to overcome this limitation while also
avoiding reboot so in future I'll consider to share it publicly in a different discussion.
Regards
Rob

Deployment error (Manifest attributes are missing or have badly formatted)

I get the following error when I try to deploy a Project from NWDS.
=> deployment not executed : file:/C:/DOCUME1/E00001/LOCALS1/Temp/temp46289Zantac.com~ZantacP1.ear
com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
(I:\usr\sap\EPT\JC02\SDM\program\temp\temp46289Zantac.com~ZantacP1.ear)
Deployment exception : Got problems during deployment
What could be the problem?
Thanks.

Hi Larry,
I guess there must an entry missing in the j2ee-components-generator.xml file in your j2ee engine.
Refer to this link,
http://help.sap.com/erp2005_ehp_04/helpdata/DE/32/50355d4efe8d45b8cd623b93e6382a/frameset.htm
Check under j2ee-components-generator.dtd
Hope this helps,
Thanks & Regards,
Meenkashi

White spaces are required between publicId and systemId

Hello,
I'm new to Java/XML and have been searching the XML forums for a viable answer trying to get around this error
"White spaces are required between publicId and systemId"
I'm a little unsure of this, however my understanding of this error is that "whitespace" must exist between my "tag entities". So I have modified my XML document to include white space between entities...below is a snippet of my XML doc
// Begin snippet...
<auth>
<userid>
12345
</userid>
<first>
first value
</first>
<second>
</second>
</auth>
//End snippetBelow is the fragment of code I use to set up and parse the XML parse
      SAXParserFactory spf = SAXParserFactory.newInstance();
      //spf.setNamespaceAware(true);
      SAXParser saxParser = spf.newSAXParser();
      XMLReader parser = saxParser.getXMLReader();
      urlConnection = url.openConnection();
      in = urlConnection.getInputStream();
      ins = new InputSource( in );
      // create a handler
      Handler handler = new Handler();
      handler.setBVSessionData( bvdata );
      // assign the handler to the parser
      parser.setContentHandler(handler);
      parser.parse( ins ); // SAXException is thrown here...what gives??
//...In addition, I'm able to read the XML file fine if I point the URL to the XML file locally on my PC, however when the XML doc is served by a web server over HTTP, then read by my app, the SAXException is thrown. Any insight or examples is greatly appreciated. Thanks in advance.

In case anybody is interested here is what I've been able to find...thanks to a little helpful book "XML and Java 2nd Edition" [Maruyama, Tamra, Uramoto, Murata, Clark]
Since I'm using a SAX parser the example doesn't really help. However the book references a DOM parser and uses a "getIsIgnorableWhitespace()" method which as my luck may have it is not available in SAX...
The book goes on to state there are two ways to tell an XML processor or an application if certain whitespace is significant:
1) "Define the significant whitespace in the content models in the DTD"
2) "Specify the xml:space="preserve" attribute in an XML document in order to indicate the intent that applications preservce all whitespace"
Can anybody elaborate on the above, especially #1 or even provide an example that would work with SAX. Thanks...

TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.

Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes.

Error: JavaFX runtime components are missing, and are required to run this

I tried to build the application using javafx ant build, generated jar file. But when I run the jar file, issue:
Error: JavaFX runtime components are missing, and are required to run this application.
The javafx-class-path: libs/h2.jar libs/jfxrt.jar libs/log4j.jar
Running the JAR file using:
java -jar app.jar
What could it be?

Which version of iTunes?
When you go to Programs control panel you can see as well as uninstall the current version.
I always uninstall Bonjour, MobileMe etc and itunes will ask if I want to reinstall those (no thanks).
itunes and many apps keep an installer cache so they can do a repair-reinstall without a full install again.
I'd install Microsoft Security Essentials 2.0 which is free and excellent.
Programs don't affect data. But if you don't have backups, you are likely past due.
If you have any doubts about the integrity of your system, if you have had to do a hard power down and likely do have issues, you should / could / might want to do chkdsk on your hard drive (hard drive properties tools scan for errors).

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

When i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

when i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I bought an iphone5 from saudi arabia,can i use it in india?is there any requirements i have to take?many one are saying i need to unlock it,please any one help me,i did'nt activate my phone yet.

i bought an iphone5 from saudi arabia,can i use it in india?is there any requirements i have to take?many one are saying i need to unlock it,please any one help me,i did'nt activate my phone yet.

If the phone is unlocked then you can use it in India.
If your phone is locked, then the only way to get the phone unlocked is to contact your phone company/carrier. The person that sold you the phone in Saudi should have told you whether it was locked or unlocked. Contact them to check and then contact the carrier to have it unlocked if it is locked.
Other than that there is not a lot that you can do - perhaps it was unwise to purchase a phone in Saudi - it won't have Facetime on it if you got it there.

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena

Error: libAPPPurchase.a are required to have universal IOS libraries

Similar Messages

Maybe you are looking for