I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?
i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?
It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"
Similar Messages
-
Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005
Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.you can see this tutorial also in this website
salah.coms.ph -
Bootcamp requires that your computer is running Windows 7?
After installing Windows XP SP2 on a 30GB FAT32 partition I can't get past a message that says 'Bootcamp requires that your computer is running Windows 7'. I have ejected the Windows XP disc and insteted the Mac OS X install disc to install the Bootcamp drivers and then see this message. I have a new MacBook Pro 13" with the 2.3GHz dual-core Intel Core i5 and 320 GB harddrive. Am I doing something wrong? Or is XP excluded from Bootcamp?
Thanks in advance for any help.XP & Vista are no longer supported, you will have to install Win7, and when you do your partition will need to be larger (50G min) and formatted as NTFS
-
Windows XP Media Center Edition FAQ
What is a Media Center PC?
It is basically a regular PC, but designed to fit into your home entertainment system to replace your DVD player, Hi-Fi, TV set-top box, as well as allowing other functions as email, web browsing and more, all from the comfort of your armchair, or elsewhere
Many new Media Center PCs (MCPCs or Home Theatre PCs - HTPCs) are styled like hi-fi components to blend in under your TV, while many are regular PCs with extra multimedia functions.
What is Windows XP Media Center Edition?
Windows XP Media Center Edition (or XP MCE for short) is basically Windows XP Professional (Service Pack 2) without advanced networking support (but including Remote Desktop Connection) and extra applications to turn your PC into a fully fledged Home Theatre PC (HTPC). The main Microsoft Media Center appplication allows a full screen interface suitable for viewing on TVs (pictured below left) and controlled by an easy to use Microsoft remote control device (below right), so you can watch and record TV, view DVDs and listen to audio CDs and digital music files.
How do I get WinXP MCE?
At the time of writing, XP MCE is only available as an OEM pack which you can purchase from your nearest dealer or online reseller, or if pre-installed on a purchased system. MCE is currently only available as a 32bit (x86) version, but works on 64bit systems.
The Media Center application is also included with the Home Premium and Ultimate editions of Windows Vista.
How do I install WinXP MCE?
MCE installs the same way as any other version of Windows XP. However it cannot be installed as an upgrade, you must do a clean install. MCE comes on two disks; a WinXP XP SP2 disc, and the MCE extras disc. Boot from CD1 as you would normally when installing Windows. The setup screens will indicate Windows XP Professional, this is normal. During the graphic part of the install process, you will be prompted to insert CD2. This is obviously the second CD of the set which you should insert, as it contains the necessary extra Media Center enhancements. When it is done, Setup will ask you for the "Windows XP SP2 CD". It is actually just asking for the first disc again, so reinsert it and let it continue.
When install is complete, the system will reboot, and you will see the normal Windows XP desktop, though with a slightly different theme. To begin using the Media Center program straight away, click on Media Center in the Start Menu to begin the Media Center Setup wizard.
What graphics hardware is required for MCE to work correctly?
MCE works with DirectX 9.0c, so ideally your hardware at a minimum needs to be DirectX 9.0 compatible.
MCE requires a minimum of 64mb video RAM (shared or dedicated), 128mb recommended for the full visual "eye-candy" interface effects.
For Nvidia GPU chipsets, MCE drivers can be found here: nVidia Drivers. You'll need at least a Geforce FX5200 for MCE to work (however I have it running on an integrated Geforce 4 MX with no problems).
For ATI GPU chipsets, drivers for MCE can be found here: ATi Drivers. You'll need at least a 9250 for MCE to work, but I understand that the 9200 may also suffice.
Unfortunately, I understand that SiS and Via (S3) chipsets (as found on many mobos with integrated VGA) are NOT MCE compatible. Some Intel integrated VGA chipsets will work now, you should refer to Intel's website for updated drivers. I also understand that Via have introduced MCE compatible drivers for their Epia SP13000 ITX board, again refer to Via's website for correct drivers. However, it is recommended to use an add-in VGA card for best results, unless you have a new board which has integrated Geforce 6100 or ATI Xpress chipsets
What TV hardware works with MCE?
In order to display TV output, MCE requires an MPEG2 stream to display. It cannot encode this itself, so requires a hardware based TV tuner / capture card, such as the Hauppage PVR MCE series, or the MSI Theater 550PRO (above left). The card receives analog video through the aerial connection, or svideo / composite inputs, encodes it into MPEG2 format, which MCE can display.
This type of analog card is required to connect a cable or satellite box (eg Telewest, NTL or Sky in UK). Using the Microsoft remote receiver, two supplied IR blasters affix to the set-top box, so MCE can automatically change channels when needed.
For best picture quality on digital TV though, you can use a software-based DVB-T card, such as the Hauppauge Nova-T or the Black Gold DVB-T (above right). Using a regular aerial, these receive high quality digital terrestrial (OTA) signals (eg the Freeview service in UK), which are broadcast in MPEG2 format, and therefore no encoding is required. In the USA, ATSC is the digital terrestrial standard used, as DVB is not available there.
Unfortunately UK users of DVB-T cards will currently not be able to make use of DVB subtitles, interactive text-based services such as Teletext and BBCi, or listen to the Digital Radio services available on Freeview. UK DVB Digital Audio services are now available with MCE Rollup 2.
Unlike with VGA cards, MCE requires that your TV hardware has special BDA (Broadcast Driver Architecture) drivers which are MCE compatible. Check your hardware manufacturers website for compatible drivers.
Unfortunately, analogue TV hardware that is software-driven (such as MSI TV@nywhere and Vox) won't work in MCE.
Windows Vista Media Center will introduce support for cable (DVB-C) and satellite (DVB-S)tuner cards
Do I need any other software to make MCE work?
As MCE is essentially based around Windows Media Player 10, you will be aware that WMP cannot play DVDs until you install a suitable DVD codec. This is also the case with MCE, as until you install this MPEG2 codec, MCE won't play ANY video (including TV). So you will also need to purchase additional MCE compatible DVD player software, such as Cyberlink PowerDVD 6, Intervideo WinDVD 6, or Nvidia's DVD Decoder MPEG codec. Results can be varied using different codecs, so it is best to try a trial version of such software to see which gives you the best results before purchasing. You may find that suitable DVD software may already be supplied with some VGA or TV tuner cards.
Anything else I need?
You will also require an internet connection (not imperative, but certainly very useful) in order for MCE to access the internet in order to find and download TV guide listings, and album and artist information when playing CDs, MP3s and WMAs.
Without guide information, you will have to manually schedule TV recordings, and no programme information will be available.
If you are planning on having your Media Center in your living room, the Microsoft Remote Controller will allow you to control all aspects of the MCE interface without the need for a keyboard or mouse connected.
If you are connecting your Media Center to your TV, then your video display device will need TV-out capabilities (S-Video or Composite). S-Video offers better picture quality over composite video, but you will need to ensure your TV supports S-Video input, otherwise you will just see black and white video.
If your TV supports RGB inputs, then you may be able to obtain a VGA > RGB adaptor, which offers even better picture quality (search with Google, there are lots of sites about this). Many modern LCD and plasma TVs also support direct VGA / DVI inputs. VGA > RGB/SCART is only compatible with ATI Radeon VGA cards.
Can I watch one channel while recording another?
Yes, but you will need two identical TV devices, eg 2x DVB-T cards. You cannot have one analogue card, and one digital, as MCE presumes both hardware devices receive same channels, and can pick and choose between them. (However in the USA, you may have two analogue tuners, and one HDTV tuner)
This is straightforward when using two identical DVB-T cards. MCE has a channel list and guide data, so for example you are watching BBC1 on one tuner, MCE uses the other tuner to record the other programme on ITV2. Both cards are receiving the same input.
It gets a little more complicated if you want to do the same with a paid subscription service, such as NTL Cable or Sky Satellite in UK. As well as having two matching tuners (although I understand that some companies, including Hauppage, are releasing "dual-tuner" cards) you will also require two set-top boxes, with a subscription for each, as MCE needs to be able to change the channel on each set-top box seperately.
Good links....
Windows XP Media Center Edition 2005 homepage
The Green Button - very good MCE community forum
MCESoft - for all sorts of plug-ins and extras for MCE
XPMCE.com - Windows Media Center forums
ukShazam.com - Media Center help & more
Note: MSI is not responsible for the content of external links[/b]
Look out for me in the XPMCE forums if you need further help!
That's about it for now, hope you find it useful. As I think of (meaning "remember" ) other stuff I'll add it above. If you know something that I've missed out, please post below with as much info as you can, and I'll add it to the guide, with a credit to you!
If you need help to solve a problem or want to ask a question, then START your own thread, with as much info as you can, please do NOT post in this thread, this thread is only for tricks,tips and useful reference info.For some reason when using the "certified" MCE version of the Forceware drivers, after a short while all the buttons in the menus become "corrupted"
The simple solution: use regular XP/2000 version of Forceware drivers. They still work perfectly in MCE2005, and the graphical corruption doesn't appear.
nVidia Drivers
EDIT: this problem appears to have been corrected in the recent Rollup 2 Update -
AirPort requires that your computer is running Windows 7 SP1 or newer, AirPort requires that your computer is running Windows 7 SP1 or newer
There is a version for earlier releases..
But you should update your win7 to sp1 anyway. -
Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.
Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium -
Adobe photoshop lightroom requires that your computer is running windows 7 or later
when i try to install lightroom 5 on my pc i get this message "adobe photoshop lightroom requires that your computer is running windows 7 or later". i have a windows 7 pc. can anybody help me?
Install Service Pack 1 for Windows 7
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
http://windows.microsoft.com/en-au/windows7/install-windows-7-service-pack-1 -
I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?
What does the error message say? (Precise text, please.)
-
I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?
Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
-
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode. -
I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.
Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC
-
When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?
I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net. I get error 651. I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up. I would like a work around.
-
When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what. -
Running 10.6.8 and can't upgrade to Yosemite. Receive this error message "We could not complete your purchase. INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE"
i have the same problem too, you didnt find the answer yet???
-
I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?
iLife '09 is not available as a download - it is only available as a purchase
iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
Exactly what did you do? And exactly what does the error message say?
On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
LN
Maybe you are looking for
-
How do I keep BI Publisher running when I log out of the console in linux?
I am using the standalone version of BI Publisher and I want to keep it running even after I log out of the console. I have a script that starts it so I typed 'nohup start_bipub.sh &' but when I log out it shuts down anyway. I started my apache serve
-
Can anyone tell me why iTunes keeps unmounting CDs instead of scanning them
How old is this bug? And why do Apple not eliminate it?
-
Can I Install CC on More than 2 PCs?
Hi guys I run CC on a Laptop and Desktop. We're about to get a 2nd Desktop. Just so I don't banjax my account in some way, can I install CC on this 3rd machine (as a contingency) provided I'm only ever signed into CC on 2 machines at any one time? Re
-
Urgent: ALE setting for BAPI_PROFITCENTER_CREATE used in LSMW
Hi Experts I have previously posted this qurey but wasnt able to get it solve . I am working on a LSWM project ,which uses BAPI BAPI_PROFITCENTER_CREATE for upload of data,but I am facing a strange problem during the IDOC posting the error "No ALE sc
-
Call do not route to operator when users do not press any key
We have a new CUCM platform with Cisco Unity ver 9.1.2TT1.11900-2TT1. We configured system handlers and and all "caller input" options runs good but when callers do not press any key the call goes to "nowhere", instead of going to Operator (default b