Error loading a flat file.

Hi,
I am getting the following error while loading a flat file (in Preview):
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCHBZFI_PREV_YR was found in a newe
Please help.

Hi,
Check whether the file is open? close the file and try to pull once again.
Fields are matching with the data source? check it once. it should be in sync with MData fields.
and may be the problem with data...I think some Extra permitted chars / lower case is there in flat file. this can be solved by RSKC

Similar Messages

  • Error loading from flat file

    Hello Everyone,
    I loaded an InfoObject from a flat file. This infoobject has 3 attributes. The order of the fields in the file is in sync with Communication structure. I am getting the following errors for data of one attribute.
    'Lowercase' indicator is checked for the ZDES attribute.
    Value 'IndCp' for characteristic ZDES contains invalid characters: RRSV 7
    ZDES: Data Record 1 (A123): Version 'IndCp' is not valid:        RSDMD 194
    'A123' is the value of the first records of the parent infoobject.
    We are on  BW 3.0B. SP 18.
    Thanks.

    Hi Sachin :
    SAP Note :681084
    Initial value '#' for attribute not saved 
    Symptom
    Transaction RSDMD, select infoObject. In the maintenance screen,
    select multiple records and click on change. Set the value of an attribute to initial ie '#'. The '#' value is taken as the value of the attribute. If we try to save the data with '#', the RSDMD 194 and RRSV 007 messages are thrown. For eg. "Value '#' for characteristic ZUS_ATTR1 contains invalid characters". The correction instructions number for
    this fix is 307536.
    The same symptom is found when the LIST->CHANGE ALL RECORDS option is
    selected. The error messages RSDMD 194 and RRSV 007 are thrown when we
    try to save the data with the '#' value. The correction instruction
    number for this fix is 610014.
    The same problem is noticed when a new entry is created using the
    RSD1 transaction with an '#' value. The correction instruction number
    for this fix is 335642.
    Check this Note.,
    Hope this helps,
    Sudh

  • Error when loading a flat file

    Hello,
    I am trying to load a flat file into our BW for the first time.  I keep getting the error:
    Error 1 when loading external data
    Message no. RSAR234
    I have search SDN and looked at the OSS notes and have tried several suggestions, but I still cannot get the file to load.  We are currently on version 3.5.
    My transfer structure and flat file do match.
    My transfer structure for IO_MAT_ATTR has a transfer method of PSA and is laid out as follows:
    IO_MAT                      Material Number          IO_MAT
    IO_MATNM     Material Name          IO_MATNM
    IO_MAT is: CHAR 15
    IO_MATNM is: CHAR 30
    My flat file is saved as a CSV and is as follows:
    MATONE,TEA
    MATTWO,COFFEE
    My file is saved on my local PC and is not open when I try to load it.  When I attempt to preview the file in my infopackage, I get the same error there as well.
    Any suggestions would be greatly appreciated.
    Thanks
    Charla

    Hi Charla,
    Error 1 means that the system is unable to access the file. Make sure that the path is correct and also check if the data separator is correctly defined in the "external tab" of the infopackage.
    I guess the settings in the "external tab" of the infopackage have some issues.
    Bye
    Dinesh

  • Error while loading CSV Flat file

    Hi,
    I am getting the following errors while loading a flat file into the DataSource:
    1. Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
    2. Error 'The argument '9,018.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSA record 1 value 9,018.00
    What can I do to correct this?
    Thanks

    I am taking the following (Headers) fields in this order in a CSV file :
    0LOGSYS     ,0MATERIAL,0UNIT,0BASE_UOM,0COMP_CODE,0PLANT,0FISCPER,0FISCVARNT,
    0CURRENCY,0PRICE_TYPE,ZTVSAKF,ZVOTVSKF,0PRICE_CTRL,ZPRICE_STKF,0PRICE_BASE,
    0VAL_CLASS,0CURTYPE,0VALUATION
    I have added all these fields in the DataSource as well. T-Code CUNIT has CS as a Unit. 
    I deleted and recreated the DataSource and am getting this error now:
    Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
    Error 'The argument '1,398.00' cannot be interpreted asa number' on assignment field /BIC/ZTVSAKF record 1 value 1,398.00
    Error 'The argument '8,10.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSKF record 1 value 8,10.00
    Error 'Unit 0 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field BASE_UOM record 1, value )
    Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
    Error 'The argument '5,50.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSAKF record 1 value 5,50.00
    Does it matter what order the columns are in?

  • Errors when trying to load a flat file

    When I try and load a flat file (I have also manually created a test .csv file with one record) I am able to load to PSA, but when I try and load to the Object I get the following error message (below), how can I fix this? Thanks
    The test record is:
    1460;MAMO;UK - Banbury;MAMO;Other;FCJ
    Diagnosis                                                                               
    Data record 1 & with the key '1460MAMO &' is invalid in value 'Other &'   
        of the attribute/characteristic WINVCAT &.                                                                               
    System response                                                                               
    The system has recognized that the value mentioned above is invalid, and  
        has processed this general error message. A subsequent message may give   
        you more information on the error. This message refers to the same        
        value, even though it does not state this explicitly.                                                                               
    Procedure                                                                               
    If this message appears during a data load, maintain the attribute in     
        the PSA maintenance screens. If this message appears in the master data   
        maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

    Hi
    GO to Transaction RSKC and check whether & available or not,if it is not there please enter & value and execute.
    and also go to the psa and change record(delete the gap before & and save and reload it...
    Thanks
    Teja
    Message was edited by: Teja badugu

  • CUNIT error in data loading from flat file after r/3 extraction

    Hi all
    After R/3 business content extraction, if i load data from flat file to info cube, I am getting Conversion exit CUNIT error, what might be the reason, the data in the flat file 0unit column is accurate, and mapping rules are also correct, but still i am getting error with CUNIT.?

    check your unit if you are loading amount or quantities what mapping you have and what you are loading from flat files.
    BK

  • Loading of flat file (csv) into PSA – no data loaded

    Hi BW-gurus,
    We have an issue regarding loading a flat file (csv) into PSA using an infopackage u2013 (BI 7.0)
    The infopackage has been used for a while. Prior the consultants with SAP_ALL-profile have run the infopackage. Now we want a few super users to run the infopackage.
    We have created a role for the super users, including authorization objects:
    Data Warehousing objects: S_RS_ADMWB
    Activity: 03, 16, 23, 63, 66
    Data Warehousing Workbench obj: INFOAREA, INFOOBJECT, INFOPACKAG, MONITOR, SOURCESYS, WORKBENCH
    Data Warehousing Workbench u2013 datasource (version > BW 3.x): S_RS_DS
    Activity: All
    Datasource: All
    Subobject for New DataSource: All
    Sourcesystem: FILE
    Data Warehousing Workbench u2013 infosource (flex update): S_RS_ISOUR
    Activity: Display, Maintain, Request
    Application Component: All
    InfoSource: All
    InfoSource Subobject: All values
    As mentioned, the infopackage in question, has been used by consultants with SAP_ALL-profile for some time, and been working just fine.  When the super users with the new role are executing the infopackage, the records are found, but not loaded into PSA. The load seems to be stuck, but no error message occurs. The file we are trying to load contains only 15 records.
    Details monitor:
    Overall status: Missing messages or warnings (yellow)
    Requests (messages): Everything ok (green)
      ->  Data request arranged (green)
      ->  Confirmed with: OK (green)
    Extraction (messages): Errors occurred (yellow)
      ->  Data request received (green)
      -> Data selection scheduled (green)
      -> 15 Records sent (0 Records received) (yellow)
      -> Data selection ended (green)
    Transfer (IDocs and TRFC): Missing messages (yellow)
    Processing (data packet):  Warnings received (yellow)
      -> Data package 1 (? Records): Missing messages (yellow)
         -> Inbound processing (0 records): Missing messages (yellow)
         -> Update PSA (0 Records posted): Missing messages (yellow)
         -> Processing end: Missing messages (yellow)
    Have we forgotten something? Any assistance will be highly appreciated!
    Cheers,
    Anne Therese S. Johannessen

    Hi,
    Try to use the transaction ST01 to trace the authorization of the upload with the SAP_ALL. 
    And the enhance your Profile for the super user.
    Best regards
    Matthias

  • Load a flat file into BW-BPS using SAP GUI

    Hi,
    We are using BW BPS 3.5 version, i implemented how to guide  " How to load a flat file into BW-BPS using SAP GUI" successfully without any errors.
    I inlcuded three infoobjects in the text file   costelemt, Posting period and amount. the same three infoobjects i inlcuded the file structure in the global data as specified in the how to document
    The flat file format is like this
    Costelmnt      Postingperiod         Amount   
    XXXXX             #      
    XXXXX             1                          100
    XXXXX             2                           800
    XXXXX             3                           700
    XXXXX             4                           500
    XXXXX             5                           300
    XXXXX             6                           200
    XXXXX             7                           270
    XXXXX             8                           120
    XXXXX             9                           145 
    XXXXX            10                           340
    XXXXX            11                           147
    XXXXX            12                           900 
    I successfully loaded above flat file in to BPS cube and it dispalyed in the layout also.
    But users are requesting to load  flatfile in the below format
    Costelmnt        Annual(PP=#)   Jan(PP=1)   Feb(PP=2) ........................................Dec(PP=12)  
    XXXXX              Blank                       100           800                                                   900
    Is it possible to load a flat file like this
    They wants load a single row instead of 13 rows for each costelement
    How to do this. Please suggest me if anybody accorss this requirment.
    In the infocube we have got only one Info object 0FISCPER3(Posting period) and one 0AMOUNT(Amount)
    do we need 13 Infobjects for each posting period and amount.
    Is there any possiblity we can implement any user exit which we use in BEX Quer's
    Please share your ideas on this.
    Thanks in advance
    Best regards
    SS

    Hi,
    There are 2 ways to do this.
    One is to change the structure of the cube to have 12 key figures for the 12 posting periods.
    Another way is to write an ABAP Function Module to fetch the values from each record based on the posting period and store it in the cube for the corresponding characteristic. This way, you dont have to change the structure of the cube.
    If this particular cube is not used anywhere else, I would suggest to change the structure itself.
    Hope this helps.

  • Unable to load the flat file  from client  work station

    Hi,
    I am trying load a flat file (.CSV file)from my desktop (Client work station) and getting the following error.
    An upload from the client workstation in the background is not possible
    Message no. RSM860
    Diagnosis
    You cannot load data from the client workstation in the background.
    Procedure
    Transfer your data to the application server and load it from there.
    I have recd a .XLS file and then I have converted to .CSV file , which I saved in my desktop and trying to load the same.
    Please help me how to go about this?...
    Thanks in advance.
    Christy.

    Hi All,
    Again, I have tried to load the flat file from clint work station with direct loading..I have got the following errors..
    Errors : 1
    Record                                                  990: Contents '50,000' from Field /BIC/ZPLQTY_B Not Convertible in Type QUAN -> Long Tex
    like this i recd so many errors.
    ERROR : 2
    Error in an arithmetic operation in record 259     
    Please help me how to load the flat file successfully.
    If I hv to save the flat file in Appl server..how to do that..Please provide step by step instruction..
    Thanks
    Christy

  • Difference b/w Loading a Flat File made from EXCEL and NOTEPAD

    Hi
    Is there any difference in Loading a flat file made from MS-Excel and Note Pad. Imean performance or errors etc....
    GSR

    S R G,
    Theres no much difference only that when loading from excel we store excel in CSV format.  In notepad we use seperators like comma aand write one row at a time, then next....
    Rest everything is same...
    thats y it is preferable to load from excel as it is easier to represent and create...

  • Capturing ECATT error messages in flat file

    Hi  Floks,
    i captured what i am uploaded data in test script . i want cature what i am getting error log  in test script that's i want to load in flat file .how can i fulfil this requirement let me get some idea on this .
    thanks,
    Suresh

    Perhaps function module ECATT_LOG_GET_MESSAGE_LIST might be useful. If you call the function module with the log key (apparently identical to the number of the test configuration) using IM_ALL_MESSAGES = 'X' then it returns for each eCATT statement (e.g. FUN) the collected messages.
    Regs
    Tushar

  • Error in InfoPackage: Error when uploading Flat Files

    Hello Experts,
    I encoutered this error in Info Package when uploading a flat file.
    When i try to click on the "Preview" button, this errors appear:
    "Error 8 when compiling the upload program: Row
      237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
    Please help to advise what is this error about and how to resolve this?

    hi Annie,
    run RSA1 and try again
    Error when compiling the upload program (Message no. RSAR233)
    other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
    A newer version of the data type error when loading
    Flat File Preview error message
    Error when loading from Flat File
    Error message when previewing data in InfoPackage
    hope this helps.

  • Loading several flat files

    I want to load several flat files each week with the same rules file. The files are for instance week12.txt, week13.txt etc. The files are all in the same directory, and need to be loaded each time. Is it possible to use a wildcard with ESSCMD, or MaxL to create a simple loadscript? Or does anybody know another way to load several files?

    If you are using a Win OS, you could use a VBS to write a script. Call the VBS in a DOS batch file, then execute the newly created script. Note, In this example, I didn't fully build the IMPORT command. Additionally, I would add some form of error handling and logging.Const sDataPath = "c:\Files"Dim fso, oFolder, oFiles, oFile, oScriptSet fso = CreateObject("Scripting.FileSystemObject")Set oFolder = fso.GetFolder(sDataPath)Set oFiles = oFolder.FilesSet oScript = fso.CreateTextFile("c:\script.scr" ,2, False)oScript.WriteLine "LOGIN " & CHR(34) & "ASPEN" & CHR(34) & " " & CHR(34) & "ADMIN" & CHR(34) & " " & CHR(34) & "PASSWORD" & CHR(34) & ";"oScript.WriteLine "SELECT " & CHR(34) & "SAMPLE" & CHR(34) & " " & CHR(34) & "SAMPLE" & CHR(34) & ";"For Each oFile In oFiles oScript.WriteLine " IMPORT 3 " & CHR(34) & oFile.Name & CHR(34) & ";"NextoScript.WriteLine "LOGOUT;"oScript.WriteLine "EXIT;"oScript.CloseSet oFolder = NothingSet oFiles = NothingSet oScript = NothingSet fso = Nothing

  • I can not load a flat file

    I'm from chile, sorry for my English writing
    could be supported with the following error please.
    Error
    RPE-01013: SQL Loader reported error condition, number 1.
    LRM-00112: multiple values not allowed for parameter 'control'
    SQL*Loader: Release 10.2.0.3.0 - Production on Thu Oct 14 12:02:55 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL*Loader-100: Syntax error on command-line
    This happens when I try to load a flat file (CSV)
    thank you very much for your help

    This seems to be an error coming from Oracle SQL*Loader "SQL Loader reported error condition, number 1.".
    How do you access your csv - file? Is the error occurring within OWB deployment?

  • 'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK.  Help, please!

    Hi Again!
    I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
    Here are the details:  I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it).  I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box!  Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue. 
    Here's how this problem began:  I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black.  I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam.  When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message.  The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites!  They didn't have a solution, either.  I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible.  Here are the sites that receive the error message:
    http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
    http://cbslocal.com/eagles
    http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
    http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
    http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
    Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere.  Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time!  I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
    Thanks for taking the time to read my post.
    All suggestions/solutions are gratefully accepted.
    Thanks in advance for your help!
    DogPal 

    File Not Found Error in Welcome Screen
    07-Nov-2013 10:25
    Tags: #dreamweaver_cs6_update
    Help please!
    Live preview also not working.
    I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
    "On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
    Thanks,
    Martin Bond
    [personal information removed by moderator]

Maybe you are looking for