How to suppress Result rows in a Query in Web Application Designer

Hi
I am trying to post a query in Web Application Designer. I am able to run the query in WAD but the Results rows appear. I choose Suppress Result Rows always in All Characteristics option in the query in BEx Explorer but still i see result rows in the WAD. Can anyone please let me know how to suppress Result rows so that they dont appear in Web Application Designer.
Thanks,
Padma

To get the enhanced menu-
1. Open the template in WAD.
2. Go to Web Item properties.
3. Go to Entries in Context Menu.
4. Find the "Enhanced Menu" property. Set it to "display" if you want it to be visible in template result.
5. Next time when you execute your template you will be able to access it by right clicking.
or
If you just want to supress results without adding enhanced menu in the context menu, simply set "Calculate result as" to "No Display".

Similar Messages

How to Suppress result rows for ALL Characteristic within BEX Analyzer

HI,
We Currently upgrade from BEX 3.5 to BEX 7.
In BEX 3.5 Analyzer there was an option by right clicking on a Characteristic and then going to "All Characteristic" and then "Suppress all Result Rows."
In BEX 7 Analyzer it seems that you can only suppress result rows one characteristic at a time. Is there a way in BEX 7 Analyzer to suppress ALL characteristic at once. The same as BEX 3.5.
Thanks!
Edited by: Raylene Tucker on Feb 8, 2010 12:07 PM
Edited by: Raylene Tucker on Feb 8, 2010 12:09 PM

Hi,
in 7x Analyzer, surpressing the results & Filtering is specific to characteristic. and this feature is more advanced and useful than the at a time surpress,
even i fyou go to the Query Properties, it will allow you to surpress by characteristic only instead of at a time.
Hopes it is clear
Regards
ReddY A

URL link in rows/colomns of a report web application designer.

Hi,
I would like to create a URL link in a report which jumps to documents on livelink.
For example:
1. bw    30.000    www. google.nl
2. sap   40.000    www. sap.com
3. basis 50.000   www. nu.nl
etc.
etc.
Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
Thanks for your help en replies.
Rishma.
Edited by: R. Debi on Oct 7, 2010 11:20 AM

I used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document. SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
Thanks a lot,
Rishma

Presenting/Selecting the "result rows" in a query

Hi,
Here is a description of my problem:
I have a query which returns values for materials grouped by purchasing groups:
Group 1 Material A KyeFigure
Group 1 Material B KyeFigure
Result: KyeFigure
Group 2 Material C KyeFigure
Group 2 Material D KyeFigure
Result: KyeFigure
I'm using a Web application designer chart to present the values graphically. I would like only to present the result rows in the chart, not item values. But since the chart picks all KFs presented in the table (items as well) this is not the case. I've tried to find a way in the chart-settings without any luck - it seems not possible. The documentation states that you're supposed to design your table the way you want it to show in the chart. However, I'm not allowed to redesign the cube or the report. It is not possible to drill up characteristics either (this affects the calculation).
My question is: Is there a way to extract the result rows into a new table and then base my chart on that one or simply somehow present only the result rows in a chart?
Best Regards
/Daniel

Hi Daniel,
You can create the query view in BEx Analyzer. After you execute the query, use filters, drill downs etc to get to the exact "view" of data that you would like you chart to present. Save this query view. Then in your web template assign this query view as the data provider.
Hope this helps...

How to change default for Suppress Results Rows

Hi,
Does any one know a way to change the default value for the "Suppress Results Rows" from "Never" to "Always" under characteristic properties in a BEX query?
Every time we build a new query we have to go to each characteristic and change most of them to "Always". Want this to be a system wide change that would affect all new queries or existing queries that are being modified by adding new characteristics.
Thanks,
Mike

Hi Mike,
This property is controlled by domain RRXNOSUMS. You can change the default value to point from "Blank" to "U", I suppose. Haven't tried this though and I am not sure if it is okay to play around with the SAP settings. But if it works for you, do post back.
Hope this helps...

Simple but strange behaviour of "suppress result rows"

Hi,
In one of the Query, for all the characteristics, the result rows are suppressed but strangely when i execute it on web i see the result row is getting dispalyed for one char.
But when i go back and check my query designer,for every char i see suppress result row is set to Always...but i don't know why it is not reflecting on the web
Now can any one please suggest how to suppress this on web permanently..
Note:on the Web we can select the char and right click and change this feature in properties but it is a one time actitivity,Becuase when we try to execute the report once gain the result row again appreaing!!!
when we execute the same report in BEx analyzert eh result rows is NOT shown up but only in web it is apprearing
Is there any permanent way????????

Hi Swapna,
If you get the same behaviour after reopening the Web Template, you can use command "SET_RESULT_VISIBILITY" to suppress the result rows of that characteristic at Web Template level.
Check this link for more details.
http://help.sap.com/saphelp_nw70/helpdata/en/43/d828d988ef05f6e10000000a11466f/frameset.htm
Regards,
Rk.

Result Rows in BEx query

Hi Gurus,
I am using five fields A, B, C, D and E (in the same order of appearance as columns from left to right of the report) and finally the Amount (based on a condition). I am getting a weird issue while executing a query. In my report, I wanted to have an additional row for "Result" for each of the above mentioned five fields.
There is no suppression of result rows (that is I have selected "never" for "Suppress Result Rows" for all characteristics/ fields).
I checked this several times and ensured that for each of the above mentioned fields, there is no suppression. I am getting "result" rows only for D and E columns (characteristics).
My question is: Apart from getting final result ("overall result" at the bottom of the report) how do I get a result rows for B and C also?
Thanks for the Help....

Hi,
Are you running the report from the query or from the workbook? If you have changed the query and are stilll running the same workbook, sometimes these changes do not come through...Close the workbook and try to execute the query again. Does it still happen?

How to move result row for hierarchical character bellow corresponding rows

Hi expert,
in my query , I set a hierarchy for a character in row. but it result row is above rows, however I set all result row bellow corresponding rows in query property. also all other result rows display bellow corresponding rows. please tell me how to move result row for hierarchical character bellow corresponding rows.
Many Thanks,

Hi Yasinn,
you are right and you can make it even shorter:
LOOP AT ITAB.
Collect ITAB Into ITAB2.
EndLoop .
It will work much faster using field-symbols:
field-symbols:
<itab> like line of itab.
LOOP AT ITAB ASSIGNING <itab>.
Collect <itab> Into ITAB2.
EndLoop .
BTW: Kishore Babu Gummadi's suggestion about the field catalog does not make any sense, not regarding your question and not regarding a field catalog derived from DDIC fields: What is the DDIC defined output length of ekbe-wrbtr?
Regards,
Clemens

Result Row in the query output

Hi,
If I restrict a characteristic by hierarchy then I cant have the result row displayed. If the hierarchy active is removed then the result row gets displayed. All characteristics are marked to show the result row.
This characteristic is Account Number. If in the query definition I remove the restriction on account numbers and just select hierarchy active and the required hierarchy in the properties then I get the result row in the output. But now it also displays all the unassigned account numbers in a separate node Not Assigned Account Number (s).
I cant even restrict it in the output with hierarchy active selected. When I do select filter value in the output the options Include in Selection and exclude from Selection are grayed out and hence cant select it.
Please advice on this issue
Thank you,
sam

Hi Jaya,
I think you misunderstood my issue.
My problem is not that i do not want to see the field. But instead, i do not want to see only the results row in the query output.
I need to have the results to populate a calculation via sumct formula.
My question is, can sumct be populated if i hide/supress RESULT row ?
Regards,
Maili

How can update two rows in one query?

How can update two rows in one query?
Edited by: OracleM on May 4, 2009 12:16 AM

What do you mean with "two rows"? May be two columns??
If the where clause of UPDATE query matches two rows, then it will update two rows. If you want to update two columns, then add column names to your query
UPDATE your_table SET col1=value1, col2=value2 WHERE your_where_clause- - - - - - - - - - - - - - - - - - - - -
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to disable result rows in Web for all characteristics?

Hi @ all,
i want to disable the results of all Characteristics in the Web Application.
In the Query Designer I defined that the results should ever show. Later, in the Web Application, I want to disable the results for all characteristics in one step
Ist there a possibility to do that?
Thanx for your answers.
Heiko

yes - you can create a button./link that runs a URL command.
The command would use the SET_SUPPRESSION command in bw3.5
The command would be SET_RESULT_VISIBILITY in bw7.0.
for bw 3.5 - http://help.sap.com/saphelp_nw04/helpdata/en/86/27813b731fd60ee10000000a114084/frameset.htm
for bw 7.0 - http://help.sap.com/saphelp_nw70/helpdata/EN/43/d828d988ef05f6e10000000a11466f/frameset.htm

How to Hide some Rows in a List view Web Part using JavaScript ?

How to Hide some Rows in a List view Web Part using JavaScript ?

Here is the code that worked for me:
var Elements = document.querySelectorAll('div[id=WebPartWPQ3] table[class=ms-listviewtable]>tbody tr .ms-vb-lastCell.ms-cellstyle.ms-vb2')
for(var i=0, n = Elements.length; i < n; i++)
if(Elements[i].innerHTML=="India")
Elements[i].parentNode.setAttribute("style","display:none")
WebPartWPQ3 -> ID of webpart Div
ms-listviewtable -> class name of table in Div
ms-vb-lastCell.ms-cellstyle.ms-vb2 -> classname of td to get text

Web Application Designer ver 3 vs Standard Web base on Query designer

Hi All,
*. How to get the detail information regarding the standard template that have been created by SAP when we click the button 'Display Query on the Web'
The standard template quiet useful , however we trying to make the graph bigger.
*. In Web application designer, we put 1. Generic Navigation Block, Table and Chart. But we cant find how to make Generic Navigation block and table in same row as it is shown in standard template.
Please Advice.
Cheers,
Nies

Hi,
Please check the URL:
http://help.sap.com/saphelp_nw04/helpdata/en/1d/499d398b45160ae10000000a11402f/frameset.htm
Thanks,
Venkat

New to wad?can u tell me how web application designer works?

new to wad?can u tell me how web application designer works?

Hi,
It is very simple :
1) Create the query on a datatarget in teh query designer.
2) Open the WAD ,select new webtemplate .
3) Drag and drop required Web items
4) Specify the Quaey(created in step 1) as the Data provider for all selected web items (in step 3).
For detail explanation refer:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P

How to create a date range in Web Application Designer

I am using 3.1 version of Web App Designer. I need to create a report with date ranges. I can get one date to work but not two (I need a start date and end Date). My Query has 0CALMONTH with a variable for Interval. When I select it as a dropdown (??) in Web App Designer, I only get one date prompt in web app designer.
Any suggestions??
Thanks
Kristen

Hi Kristen,
I'm sorry i'm not coming to solve your problem,but for the trouble I have had,and I want to create a date picker in Web Application Designer,so if you have solved the problem ,please email to me? [email protected] ,thx very much!
best regards
zegion chan

How to suppress Result rows in a Query in Web Application Designer

Similar Messages

Maybe you are looking for