Error:loading from external table to database table

hi,
Following error comes while inserting data from external to new_ext table
what might be the reason??
error and external table creation script is as follows
regards,
Avinash
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04020: found record longer than buffer size supported, 524288, in
/home/oracle/rgtr1.txt
ORA-06512: at " SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
ORA-06512: at "PRODNDBA.PROC_RGTR1", line 513
ORA-06512: at line 1
external table script is as follows:
DROP
TABLE EXT_TABLE_RGTR1 CASCADE CONSTRAINTS;
CREATE
TABLE EXT_TABLE_RGTR1
ID
VARCHAR2(10 BYTE),
PC
VARCHAR2(2 BYTE),
BU
VARCHAR2(4 BYTE),
CONSUMER_NO
VARCHAR2(12 BYTE),
CUR_READING1
NUMBER,
CUR_READING2
NUMBER,
ADJ_CONS1
NUMBER,
ADJ_CONS2
NUMBER,
TOT_EC
NUMBER,
TOT_FCA
NUMBER,
TOT_ED
NUMBER,
ADDLESS_AMT
NUMBER,
NETBILL_AMT
NUMBER,
ADJ_UNIT1
NUMBER,
ADJ_UNIT2
NUMBER,
TARIFF_CODE
NUMBER,
DUTY_CODE
NUMBER,
DISCONN_TAG
VARCHAR2(1 BYTE),
MIN_CHRG_IND
VARCHAR2(1 BYTE),
OC_CODE1
VARCHAR2(1 BYTE),
OC_CODE2
VARCHAR2(1 BYTE),
OC_AMT1
NUMBER,
OC_AMT2
NUMBER,
PREV_DPC
NUMBER,
CREDIT_AVG_BILL
NUMBER,
ADJ_TYPES
NUMBER,
ADJ_EC_FCA
NUMBER,
ADJ_ED
NUMBER,
ADJ_AMT1
NUMBER,
ADJ_AMT2
NUMBER,
ADJ_AMT3
NUMBER,
ADJ_AMT4
NUMBER,
ADJ_AMT5
NUMBER,
ADJ_AMT6
NUMBER,
ADJ_AMT7
NUMBER,
ADJ_AMT8
NUMBER,
MR_CYCLE
VARCHAR2(2 BYTE),
NOTICE
VARCHAR2(2 BYTE),
INSTAL_IND
VARCHAR2(1 BYTE),
LAST_RCPT_DT
VARCHAR2(6 BYTE),
MS1
NUMBER,
MS2
NUMBER,
ARR_PL_CR
NUMBER,
PREV_READ1
NUMBER,
PREV_READ2
NUMBER,
OLD_CONS_NUM
VARCHAR2(16 BYTE),
MTR_CODE1
VARCHAR2(2 BYTE),
MTR_CODE2
VARCHAR2(2 BYTE),
ABR_EC1
NUMBER,
ABR_FCA1
NUMBER,
REV_CAT
VARCHAR2(2 BYTE),
BILL_DT
DATE,
SD_PAID
NUMBER,
SD_ARRS
NUMBER,
SD_ADDL
NUMBER,
PR_RDNG_IND1
VARCHAR2(1 BYTE),
PR_RDNG_IND2
VARCHAR2(1 BYTE),
NAB_IND
VARCHAR2(1 BYTE),
CONN_LOAD
NUMBER,
OLDEST_OS_DT
VARCHAR2(4 BYTE),
ABR_RECAMT1
NUMBER,
METER_RENT
NUMBER,
EX_DUTY
NUMBER,
TDL_CHARGES
NUMBER,
ABR_MTH
VARCHAR2(4 BYTE),
READING_IND
VARCHAR2(1 BYTE),
FB_IND
VARCHAR2(1 BYTE),
ADJ_AMT
NUMBER,
MTR_NUM1
NUMBER,
MTR_NUM2
NUMBER,
AVG_UNITS1
NUMBER,
AVG_UNITS2
NUMBER,
MIN_BILL_AMT
NUMBER,
METER_COST_DEMANDED
NUMBER,
MF1
VARCHAR2(2 BYTE),
MF2
VARCHAR2(2 BYTE),
MR
VARCHAR2(2 BYTE),
ROUTE
VARCHAR2(4 BYTE),
SEQ
VARCHAR2(4 BYTE),
DISC_IND
VARCHAR2(1 BYTE),
FREEZE_CODE
VARCHAR2(1 BYTE),
MTH40
NUMBER,
CONCES_EC
NUMBER,
METER_COST_ARREARS
NUMBER,
METER_COST_PAID
NUMBER,
SANCTION_LOAD
NUMBER,
PENALTY_ON_CL
NUMBER,
CL_SLB
NUMBER,
UNTSLB
NUMBER,
CAPACIT_PENALTY
NUMBER,
ARREARS_OF_INT
NUMBER,
INT_ON_ARREARS
NUMBER,
FIXED_CHARGES
NUMBER,
ASSESSED_DPC
NUMBER,
FCA_UNT_OLD
NUMBER,
FCA_UNT_NEW
NUMBER,
DEFECT_RDN1
NUMBER,
DEFECT_RDN2
NUMBER,
CAP_CT_RENT
NUMBER,
CT_RENT
NUMBER,
ADV_BILL_IND
VARCHAR2(1 BYTE),
ADV_BILL_RD_IND
VARCHAR2(1 BYTE),
INST_IND
VARCHAR2(1 BYTE),
CONSCUR_STATUS
VARCHAR2(1 BYTE),
MTR_COST1
NUMBER,
MTR_COST2
NUMBER,
MTR_COST3
NUMBER,
LOOM_NOS
NUMBER,
CONS_OLD_TARIFF
NUMBER,
CONS_NEW_TARIFF
NUMBER,
PD_TD_DATE
VARCHAR2(6 BYTE),
ED5
VARCHAR2(10 BYTE),
ED6
VARCHAR2(10 BYTE),
ED8
VARCHAR2(10 BYTE),
B66_AMT1
NUMBER,
BILL_MTH
VARCHAR2(6 BYTE),
STD_MTH
NUMBER,
PREV_RD_MTH
VARCHAR2(4 BYTE),
ACCT_HD_TRF
VARCHAR2(2 BYTE),
ADM_CODE
NUMBER,
BILL_DUE_DATE
DATE,
EC_DUTY
NUMBER,
ABNOR_IND
VARCHAR2(1 BYTE),
TRF04_CONN_LOAD
NUMBER,
PROCESS_DT
DATE,
SUPPLY_DATE
VARCHAR2(6 BYTE),
BILL_DT_FROM
DATE,
RECEIPT_AMT
NUMBER,
LOCKED_CR_UNITS
NUMBER,
LOCKED_CHARGES
NUMBER,
LOCKED_ED
NUMBER,
LOCKED_FCA
NUMBER,
LOCKED_FC
NUMBER,
LOCKED_RLCHARGES
NUMBER,
LOCKED_CL
NUMBER,
LOCKED_ECEDFIX
NUMBER,
LOCKED_ACC_MONTH
NUMBER,
AVG_OLD_CONSMP
NUMBER(6),
AVG_SINCE
VARCHAR2(4 BYTE),
AVG_OCCURANCES
NUMBER(2),
AVG_MA_IND
VARCHAR2(1 BYTE),
MTR1_PHASE
NUMBER(1),
MTR_PHASE1
VARCHAR2(1 BYTE),
MTR2_PHASE
NUMBER(1),
IND_CAT
VARCHAR2(1 BYTE),
L61_TARIFF
NUMBER(2),
MTR_CHG_AMT1
NUMBER(12),
NO_OF_MONTHS
NUMBER,
MTR_CHG_AMT2
NUMBER(12),
B66_AMT
NUMBER(10),
ADJ_AMT11
NUMBER,
B66_ADJ_TYP
VARCHAR2(1 BYTE),
B60_AMT
NUMBER(10),
ADJ_AMT13
NUMBER,
B60_ADJ_TYP
VARCHAR2(1 BYTE),
CPF_NO
NUMBER(8),
ADJ1
NUMBER(9),
ADJ2
NUMBER(9),
ADJ3
NUMBER(9),
ADJ4
NUMBER(9),
ADJ5
NUMBER(9),
ADJ6
NUMBER(9),
ADJ7
NUMBER(9),
ADJ8
NUMBER(9),
ADJ11
NUMBER(9),
ADJ13
NUMBER(9),
DTC_CODE
VARCHAR2(7 BYTE),
TITLE
VARCHAR2(8 BYTE),
NAME
VARCHAR2(36 BYTE),
ADDRESS1
VARCHAR2(26 BYTE),
ADDRESS2
VARCHAR2(26 BYTE),
VILLAGE
VARCHAR2(14 BYTE),
PIN
VARCHAR2(6 BYTE),
LOCK_SINCE
VARCHAR2(4 BYTE),
FAULTY_SINCE
VARCHAR2(4 BYTE),
MTR_DIGIT1
VARCHAR2(1 BYTE),
MTR_DIGIT2
VARCHAR2(1 BYTE),
FCA_PAISE
NUMBER(9),
GTY_EXP_DT
VARCHAR2(6 BYTE),
REJ_READ_MTR1
NUMBER(6),
REJ_READ_MTR2
NUMBER(6),
REJ_ADJ_UNITS1
NUMBER(6),
REJ_CONSMP
NUMBER(6),
OWNER_CODE
NUMBER(1),
MTR_CAP_AMP
NUMBER(1),
MTR_A
VARCHAR2(1 BYTE),
MTR_C
VARCHAR2(1 BYTE),
MTR_D
VARCHAR2(1 BYTE),
MTR_E
VARCHAR2(1 BYTE),
CUT_OF_DT
DATE,
POLE
VARCHAR2(6 BYTE),
EDRATE
NUMBER(9),
AREA
VARCHAR2(1 BYTE),
MTR_BRAND1
VARCHAR2(2 BYTE),
MTR_BRAND2
VARCHAR2(2 BYTE),
LC1
NUMBER(3),
POWER_CUT_IND
VARCHAR2(1 BYTE),
SERVICE_DT
DATE,
ADJ_UNIT11
NUMBER,
ADJ_UNIT22
NUMBER,
RECEIPT_AMT1
NUMBER,
MTR1
NUMBER,
STRK_BLL_AMT
NUMBER,
DUTY_UNTS1
NUMBER,
DUTY_AMT1
NUMBER,
DUTY_UNTS2
NUMBER,
DUTY_AMT2
NUMBER,
DUTY_UNTS3
NUMBER,
DUTY_AMT3
NUMBER,
ADJ_UNIT_45
NUMBER,
ADV_BIL_EC
NUMBER,
NEW_DUTY_RATE
NUMBER,
NEW_DUTY_UNTS
NUMBER,
NEW_DUTY_AMT
NUMBER,
DPC_PAB
NUMBER,
MS9_SINCE
VARCHAR2(4 BYTE),
DISTRICT_CODE
NUMBER(2),
TAX_ON_SALE
NUMBER,
LOCKED_CHARGES_TSE
NUMBER
ORGANIZATION
EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DIR
ACCESS PARAMETERS
( records delimited by newline
badfile
'ext.bad'
logfile 'ext.log'
fields
ID POSITION
(1-4),
PC POSITION
(7-7),
BU POSITION
(8-11),
CONSUMER_NO POSITION
(18-29 ),
CUR_READING1 POSITION
(33-41 ),
CUR_READING2 POSITION
(42-50 ),
ADJ_CONS1 POSITION
(51-59 ),
ADJ_CONS2 POSITION
(60-68 ),
TOT_EC POSITION
(69-86),
TOT_FCA POSITION
(87-104 ),
TOT_ED POSITION
(105-122 ),
ADDLESS_AMT POSITION
(123-140 ),
NETBILL_AMT POSITION
(141-158 ),
ADJ_UNIT1 POSITION
(159-167 ),
ADJ_UNIT2 POSITION
(168-176 ),
TARIFF_CODE POSITION
(177-178 ),
DUTY_CODE POSITION
(179-180 ),
DISCONN_TAG POSITION
(181-181 ),
MIN_CHRG_IND POSITION
(182-182 ),
OC_CODE1 POSITION
(183-183 ),
OC_CODE2 POSITION
(184-184 ),
OC_AMT1 POSITION
(185-202 ),
OC_AMT2 POSITION
(203-220 ),
PREV_DPC POSITION
(221-238 ),
CREDIT_AVG_BILL POSITION
(239-256 ),
ADJ_TYPES POSITION
(257-264 ),
ADJ_EC_FCA POSITION
(265-282 ),
ADJ_ED POSITION
(283-300 ),
ADJ_AMT1 POSITION
(301-318 ),
ADJ_AMT2 POSITION
(319-336 ),
ADJ_AMT3 POSITION
(337-354 ),
ADJ_AMT4 POSITION
(355-372 ),
ADJ_AMT5 POSITION
(373-390 ),
ADJ_AMT6 POSITION
(391-408 ),
ADJ_AMT7 POSITION
(409-426 ),
ADJ_AMT8 POSITION
(427-444 ),
MR_CYCLE POSITION
(445-446 ),
NOTICE POSITION
(447-448 ),
INSTAL_IND POSITION
(449-449 ),
LAST_RCPT_DT POSITION
(453-458 ),
MS1 POSITION
(459-459),
MS2 POSITION
(460-460),
ARR_PL_CR POSITION
(461-478 ),
PREV_READ1 POSITION
(479-487 ),
PREV_READ2 POSITION
(488-496 ),
OLD_CONS_NUM POSITION
(497-512 ),
MTR_CODE1 POSITION
(513-514 ),
MTR_CODE2 POSITION
(515-516 ),
ABR_EC1 POSITION
(517-534 ),
ABR_FCA1 POSITION
(535-552 ),
REV_CAT POSITION
(553-554 ),
BILL_DT POSITION
(555-560 ) DATE "DDMMYY",
SD_PAID POSITION
(561-569 ),
SD_ARRS POSITION
(570-578 ),
SD_ADDL POSITION
(579-587 ),
PR_RDNG_IND1 POSITION
(588-588 ),
PR_RDNG_IND2 POSITION
(589-589 ),
NAB_IND POSITION
(590-590 ),
CONN_LOAD POSITION
(592-600 ),
OLDEST_OS_DT POSITION
(601-604 ),
ABR_RECAMT1 POSITION
(605-622 ),
METER_RENT POSITION
(623-631 ),
EX_DUTY POSITION
(632-649 ),
TDL_CHARGES POSITION
(632-649 ),
ABR_MTH POSITION
(650-651 ),
READING_IND POSITION
(652-652 ),
FB_IND POSITION
(653-653 ),
ADJ_AMT POSITION
(654-671 ),
MTR_NUM1 POSITION
(672-681 ),
MTR_NUM2 POSITION
(682-691 ),
AVG_UNITS1 POSITION
(692-700 ),
AVG_UNITS2 POSITION
(701-709 ),
MIN_BILL_AMT POSITION
(710-727 ),
METER_COST_DEMANDED POSITION
(710-727 ),
MF1 POSITION
(728-729),
MF2 POSITION
(730-731),
MR POSITION
(732-733),
ROUTE POSITION
(734-737),
SEQ POSITION
(738-741),
DISC_IND POSITION
(742-742 ),
FREEZE_CODE POSITION
(743-743 ),
MTH40 POSITION
(744-752),
CONCES_EC POSITION
(753-770 ),
METER_COST_ARREARS POSITION
(753-770 ),
METER_COST_PAID POSITION
(771-788 ),
SANCTION_LOAD POSITION
(789-797 ),
PENALTY_ON_CL POSITION
(798-815 ),
CL_SLB POSITION
(816-817 ),
UNTSLB POSITION
(818-819 ),
CAPACIT_PENALTY POSITION
(820-837 ),
ARREARS_OF_INT POSITION
(838-855 ),
INT_ON_ARREARS POSITION
(856-873 ),
FIXED_CHARGES POSITION
(874-891 ),
ASSESSED_DPC POSITION
(892-909 ),
FCA_UNT_OLD POSITION
(910-927 ),
FCA_UNT_NEW POSITION
(928-945 ),
DEFECT_RDN1 POSITION
(982-990 ),
DEFECT_RDN2 POSITION
(991-999 ),
CAP_CT_RENT POSITION
(1000-1008 ),
CT_RENT POSITION
(1009-1017 ),
ADV_BILL_IND POSITION
(1018-1018 )
LOCATION
(EXT_DIR:'rgtr1.txt')
REJECT
LIMIT UNLIMITED
LOGGING
NOCACHE
NOPARALLEL;

KUP-04020: found record longer than buffer size supported, number, in string
Cause: a record in the data source was longer than the maximum data size supported. The number reported is the maximum supported size of a record.
Action: none
Examine your bad file and log files for details of the rows which failed from insertion.

Similar Messages

Import/insert data from XML into Oracle database tables?

Hi. (I am using JDeveloper 10.1.3.3.0 and Oracle 10g)
I have been able to export the data from one of my database tables by using a View Object and .writeXML.
Now, I want to take an xml file that is formatted in the same way as what is spit out by the writeXML and put that info in my database table. I followed online examples and have tried using .readXML like so:
Element element = XMLDoc.getDocumentElement();
vo.readXML(element, -1);
I know it is sort of working, because at first I got an error message that one of the required attributes was missing. So, I added that attribute to my xml file and ran my code. No errors. But, I checked my database, and the new records were not added.
Is there something I have done wrong? Or is there perhaps something I left out? I also noticed there were several versions of readXML like readFromXML. Which one should I use and how?
Thanks.

KUBA, I changed my code to match your example:
DocumentBuilder db = DocumentBuilderFactory.newInstance().newDocumentBuilder();
File xmlFile = new File("C:/myfilehere.xml");
Document doc = db.parse(xmlFile);
Element element = doc.getDocumentElement();
vo.readXML(element, -1);
vo.getDBTransaction().commit();
I still get no errors, but my database table has no new records.
Any ideas why?
Thanks.

Loading internal table to database table

Hi all,
I have created a ztable .also i created an internal table with the same structure as ztable.I have some data in internal table.how to load these data from internal table into database table.how thre insert statement will be.

Hi,
Check whether entries are there in the internal table. Also check for the structure.
MODIFY dbtab FROM TABLE itab.
UPDATE dbtab FROM TABLE itab.
just read this.
If you just want to write (INSERT) 1.5 million rows of an internal table into a database table, use:
INSERT <table name> FROM TABLE <itab>.
Transaction Log Size could be a problem, therefore writing in packages could help, but this depends on your row size, your database configuration and on the current changes to your database. May be it runs in one package, if the rows are small (few bytes) then one package will be the fastest but you'll not much faster than with reasonable packages (3-20 MBytes). On Oracle with rollback segments you will probably have no problems at 1.5 million rows.
<b>Rewrad points</b>
Regards

Custom Connection Manager only works in 32bit- 0xC0011008: Error loading from XML

I have a very basic / stripped connection manager with only one property (SSIS 2012). It works fine in design time (you can open the connection manager editor and change the value), but in runtime it only works in 32bit mode. The runtime-validate-method
does work, but if everything validates OK then in 64bit it throws an error when you run the package:
Exception deserializing the package "The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information
can be stored.". This occurs when CPackage::LoadFromXML fails.
The 2 VS projects are .Net 4 class library projects with the Build Platform on "Any CPU"
I only add references to:
Microsoft.SqlServer.ManagedDTS - C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.ManagedDTS\v4.0_11.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.ManagedDTS.dll
Microsoft.SqlServer.Dts.Design - C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.Dts.Design\v4.0_11.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.Dts.Design.dll
Compiled DLL's are available in GAC and SQL Server connections folder:
I made the sourcecode available via codeplex:
https://ssisconnectionmanager.codeplex.com/SourceControl/latest#myFirstConnectionManager/2012/myFirstConnectionManager/myFirstConnectionManager.cs
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

AppPrincipal (identity) related? Hint http://serverfault.com/questions/339747/the-package-failed-to-load-due-to-error-0xc0011008-error-loading-from-xml
Arthur My Blog
Hi Arthur,
Looks like something similar (same message, same 64bit issue), will try that tomorrow! But sounds weird that you should tell SSIS which identity to use...
Found the same thread in MSDN:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/47d185d3-c801-45cf-becd-3c2524d98353/the-package-failed-to-load-due-to-error-0xc0011008-error-loading-from-xml?forum=sqlintegrationservices
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Error loading from 0BAP_TABLE_14ROC

Hi experts, when I want to run a Statistic Report (for example : Process status) from BI administration cockpit on production environment I get this message : Error loading from 0BAP_TABLE_14ROC. On the others environments, everything is ok. Who can help ? Thanks a lot

Hello Guru's,
I am also getting the same error while running the webtemplates for BI admin cockpit. I am not getting any error while running queries.
Please advice what needed to be done.
Thanks
Aman

SSIS packages deployment error- The package failed to load due to error 0xC0011008 Error loading from XML

I am trying to deploy SSIS packages to file system using manifest file. These packages are upgraded from SSDT 2005 to SSDT 2010. Also I have changed the protection level from 'EncryptSensitiveWithPassword' to 'DontSaveSensitive' to upgrade it.
I coun't complete the deployment and the error details shown below.
TITLE: Package Installation Wizard
Package "Packagename.dtsx" could not be loaded. The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed
error information can be stored.". This occurs when CPackage::LoadFromXML fails.
Package ""Packagename.dtsx" could not be loaded. The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where
detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
ADDITIONAL INFORMATION:
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when
CPackage::LoadFromXML fails.
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when
CPackage::LoadFromXML fails.
BUTTONS:
OK
Please give a solution.
Sreekanth Mohan

Check this
blog post as it gives complete information about error.
It looks like its still using SQL 2005 DTEXEC.exe instead of latest version.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

The package failed to load due to error 0xC0011008 "Error loading from XML....." This occurs when CPackage::LoadFromXML fails

Source environment: Win 7 Enterprise SP1 64bit - SQL Server 2008 R2 SP1 Developer Edition (10.50.2550.0 )
Target environment: Win 2008 R2 Standard SP1 64bit - SQL Server 2008 R2 SP1 Standard Edition (10.50.2500.0
I want to deploy a package with the deployment manifest, but I'm getting an error (during deployment):
Package "D:\Program Files (x86)\Microsoft SQL Server\100\DTS\Packages\Migration\Students.dtsx" could not be loaded.
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can
be stored.". This occurs when CPackage::LoadFromXML fails.
I already remove a fuzzy lookup since this isn't part of the Standard edition, but still getting the error above.
Package Example:
If I just copy the package and try to run it I get this (0xC0010014):
Any suggestions?

Hi SSISJoost,
After installing some update such as MS09-62 (KB970896), the "DTS.dll" and "MsDtsSrvrUtil.dll" may be unregistered. In this issue, the error may occur if the two DLL files are not registered. Here, please register both the 32 bit and 64 bit versions of the
DTS.dll and MsDtsSrvrUtil.dll files, and check the issue again.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Apply check tables to database tables

how to apply check tables to database tables???
plz help

Hi
Check Table: means the Table that contains the Primary key in the Foreign key definition.
It has 2 important uses:
1. To validate the inputs in the foriegn key field (For Eg: MARC-MATNR) with the values existing in the check table - Primary key field (Eg: MARA-MATNR)
Here MARA is the Check table for the MARC-MATNR
2. To provide the input help(F4) for foreign key field
check table is the field level checking. we can use the Cardinality based on ur requirment.
see the example.
if ur using two tables like ekko and ekpo.
ekko tables having the fields ebeln , bukrs and lifnr.
here primery key is ebeln.
ebeln bukrs lifnr
101 1000 1000
102 1000 1000
103 2000 1001(this is entry for ekko).
we want to insert the entry based on ekko tables.so ekko table is the ckeck table.
ekpo table is the itam table.
ekpo tables having the fields ebeln , matnr , menge .
here forign key is ebeln.
ebeln matnr menge
101 m-1 10
101 m-2 2
101 m-4 18
102 m-8 7
103 m-5 8
in ekpo table we can't enter other than ekko-ebeln value.
so we can enter only based on ekko-ebeln table entries.

SQL Loader problem while loading records from txt file to database table.

I am getting following error while loading records from flat txt file into database table with the help of 'sqlldr' command. I have executed catldr.sql from RDBMS folder but it is still showing same error. I am setting DIRECT = TRUE while issuing sqlldr command. If I try with DIRECT = FALSE then it works fine. Database is Oracle 8i.
SQL*Loader-951: Error calling once/load initialization
ORA-24329: invalid character set identifier
F1 Please.

Hello,
Direct path load, can only be used with SQL*Loader and Database have the same version.
Care to tell the database version and sql*loader version you are using.
-Sri

Error loading from database

I have a .wft file and two databases: Deploy and Production.
If I save the .wft file to Production it works fine but if I save it to Deploy I get when Uploading from database:
1300: Could not load.
1114: Could not load from database.
1115: Could not load all definitions referenced by 'CON_MAIL' item type.
1115: Could not load contents of 'CON_MAIL' item type.
1101: Could not load item types from database. FILTER=CON_MAIL
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT protect_level, custom_level, name, display_name, description, type, subtype, format, text_default, to_char(number_default), to_char(date_default, 'YYYY/MM/DD HH24:MI:SS') FROM wf_item_attributes_vl WHERE item_type = :type ORDER BY sequence
It did not create in deploy the row in the table wf_item_attributes and I think this is not a NLS_LANG problem because the same file worked in Production DB (they have the same environement).
Any solution? I could create process in Deploy until one month ago.
Thanks in advance JR

José,
Por tu nombre asumo que hablas español por lo que te escribo en ese idioma.
En nuestro caso, como el mensaje de error indicaba que el siguiente query generaba problemas, lo analizamos
SELECT protect_level, custom_level, name, display_name, description,
type, subtype, format, text_default, to_char(number_default),
to_char(date_default, 'YYYY/MM/DD HH24:MI:SS')
FROM wf_item_attributes_vl
WHERE item_type = :type
ORDER BY sequence
Encontramos que la vista wf_item_attributes_vl se basa en las tablas WF_ITEM_ATTRIBUTES y WF_ITEM_ATTRIBUTES_TL
El problema se generaba porque en la tabla WF_ITEM_ATTRIBUTES había un registro que no tenía su correspondiente en la tabla WF_ITEM_ATTRIBUTES_TL (considerar que la vista wf_item_attributes_vl filtra los datos de acuerdo al lenguaje de la sesión, usando userenv('LANG') )
Creando el registro faltante en la tabla WF_ITEM_ATTRIBUTES_TL, los datos del atributo aparecieron en la vista wf_item_attributes_vl, y el problema desapareció.
En nuestro caso el verdadero problema se originó por haber manipulado los datos de definición de atributos directamente desde las tablas y no a través de WF Builder
Saludos
SV

Data Load from XML file to Oracle Table

Hi,
I am trying to load data from XML file to Oracle table using DBMS_XMLStore utility.I have performed the prerequisites like creating the directory from APPS user, grant read/write to directory, placing the data file on folder on apps tier, created a procedure ‘insertXML’ to load the data based on metalink note (Note ID: 396573.1 How to Insert XML by passing a file Instead of using Embedded XML). I am running the procedure thru below anonymous block to insert the data in the table.
Anonymous block
declare
begin
insertXML('XMLDIR', 'results.xml', 'employee_results');
end;
I am getting below error after running the anonymous block.
Error :     ORA-22288: file or LOB operation FILEOPEN failed”
Cause :   The operation attempted on the file or LOB failed.
Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
I searched this error on metalink and found DOC ID 1556652.1 . I Ran the script provided in the document. PFA the script.
Also, attaching a document that list down the steps that I have followed.
Please check and let me know if I am missing something in the process. Please help to get this resolve.
Regards,
Sankalp

Thanks Bashar for your prompt response.
I ran the insert statement but encountered error,below are the error details. statement.
Error report -
SQL Error: ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 1
22288. 00000 - "file or LOB operation %s failed\n%s"
*Cause:    The operation attempted on the file or LOB failed.
*Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
INSERT statement I ran
INSERT INTO employee_results (USERNAME,FIRSTNAME,LASTNAME,STATUS)
    SELECT *
    FROM XMLTABLE('/Results/Users/User'
           PASSING XMLTYPE(BFILENAME('XMLDIR', 'results.xml'),
           NLS_CHARSET_ID('CHAR_CS'))
           COLUMNS USERNAME NUMBER(4)    PATH 'USERNAME',
                   FIRSTNAME VARCHAR2(10) PATH 'FIRSTNAME',
                   LASTNAME    NUMBER(7,2) PATH 'LASTNAME',
                   STATUS VARCHAR2(14) PATH 'STATUS'
Regards,
Sankalp

Save data from unbound datagridview to database table.

Hi, i have a unbound datagridview that contain 8 columns i added data in it using the following code:
Dim i As Integer = DataGridViewX1.Rows.Count - 1
Me.DataGridViewX1.Rows.Add()
With Me.DataGridViewX1.Rows(i)
.Cells("id").Value = Format(i, "0000")
.Cells("design").Value = TextBoxX1.Text
.Cells("than").Value = TextBoxX2.Text
.Cells("lace").Value = TextBoxX3.Text
.Cells("color").Value = ComboBoxEx1.Text
.Cells("barcode").Value = ComboBoxEx1.Text
.Cells("received").Value = TextBoxX4.Text
.Cells("description").Value = TextBoxX5.Text
End With
when i click on the add button the data is added to the datagridview. Now what i want is to save this data that i added in unbounded datagridview to my database table.
Plz Help Me...
Thank You.

From DataGridView to a MS Access?
Imports System
Imports System.Data
Imports System.Data.OleDb
Imports System.Windows.Forms
Public Class Form1
Inherits System.Windows.Forms.Form
Private bindingSource1 As New BindingSource()
Private dataAdapter As New OleDbDataAdapter()
<STAThreadAttribute()> _
Public Shared Sub Main()
Application.Run(New Form1())
End Sub
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim connectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\Users\Ryan\Desktop\Coding\Microsoft Access\Northwind_2012.mdb"
Dim selectCommand As String
Dim connection As New OleDbConnection(connectionString)
selectCommand = "Select * From MyExcelTable ORDER BY ID"
Me.dataAdapter = New OleDbDataAdapter(selectCommand, connection)
With DataGridView1
.AutoSizeRowsMode = DataGridViewAutoSizeRowsMode.AllCells
.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.ColumnHeader
.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.ColumnHeader
End With
Dim commandBuilder As New OleDbCommandBuilder(Me.dataAdapter)
Dim table As New DataTable()
table.Locale = System.Globalization.CultureInfo.InvariantCulture
Me.dataAdapter.Fill(table)
Me.bindingSource1.DataSource = table
Dim data As New DataSet()
data.Locale = System.Globalization.CultureInfo.InvariantCulture
DataGridView1.DataSource = Me.bindingSource1
Me.DataGridView1.AlternatingRowsDefaultCellStyle.BackColor = Color.Aqua
Me.DataGridView1.AutoResizeColumns( _
DataGridViewAutoSizeColumnsMode.AllCells)
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click, btnUpdate.Click
Dim table As New DataTable()
Me.bindingSource1 = Me.DataGridView1.DataSource
table = Me.bindingSource1.DataSource
Me.dataAdapter.Update(table)
End Sub
End Class
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How to extract data from text file to database table

Hi ,
I am trying to upload data in text file to database table using GUI_UPLOAD function .what would be the program for that.
thanks in advance.

Hi,
I don't think you have a standard sap program to upload data from file to database table...
Instead you can create a custom program like this..
DATA: T_FILEDATA(1000) OCCURS 0 WITH HEADER LINE.
DATA: T_ZTABLE LIKE ZTABLE OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'C:\TEST.TXT'
tables
    data_tab                      = T_FILEDATA
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FILEDATA.
T_ZTABLE = T_FILEDATA.
APPEND T_ZTABLE.
ENDLOOP.
MODIFY ZTABLE FROM TABLE T_ZTABLE.
COMMIT WORK..
Thanks,
Naren

Moving data from .xls spreadsheet to database table

Hi,
Does any one know a script or the procedure to move data from an .xls spreadsheet to a database table?
Thanks,
Ranjana

Hi,
check this out.. !!
Import data from Excel to Oracle Database and
Added link From Ask Tom.. your requirement you would be satisfied.. I supppose.. !!
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:908428873069
- Pavan Kumar N

Inserting records from internal table to database table

Hi all,
i want to insert records from internal table to zDatabase table, can u plz guide me which statement is better in performance to insert the records.
1) insert one by one record from internal table
loop at itab.
insert ztable from wa.
endloop.
2) insert total records at a time
INSERT <dbtabname> CLIENT SPECIFIED FROM TABLE itab.
or let me know if any other statement is there with high performance.
i internal table contains nearly 40000 records.
thanks.

Hi,
Insert the entire table at atime rather than a record so as to increase the performance.
you can use INSERT <dbtabname> CLIENT SPECIFIED FROM TABLE itab.
or
MODIFY ZPRODUCT FROM TABLE GI_AFPO.
Regards,
Raj.

Error:loading from external table to database table

Similar Messages

Maybe you are looking for