Error loading from database

I have a .wft file and two databases: Deploy and Production.
If I save the .wft file to Production it works fine but if I save it to Deploy I get when Uploading from database:
1300: Could not load.
1114: Could not load from database.
1115: Could not load all definitions referenced by 'CON_MAIL' item type.
1115: Could not load contents of 'CON_MAIL' item type.
1101: Could not load item types from database. FILTER=CON_MAIL
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT protect_level, custom_level, name, display_name, description, type, subtype, format, text_default, to_char(number_default), to_char(date_default, 'YYYY/MM/DD HH24:MI:SS') FROM wf_item_attributes_vl WHERE item_type = :type ORDER BY sequence
It did not create in deploy the row in the table wf_item_attributes and I think this is not a NLS_LANG problem because the same file worked in Production DB (they have the same environement).
Any solution? I could create process in Deploy until one month ago.
Thanks in advance JR

José,
Por tu nombre asumo que hablas español por lo que te escribo en ese idioma.
En nuestro caso, como el mensaje de error indicaba que el siguiente query generaba problemas, lo analizamos
SELECT protect_level, custom_level, name, display_name, description,
type, subtype, format, text_default, to_char(number_default),
to_char(date_default, 'YYYY/MM/DD HH24:MI:SS')
FROM wf_item_attributes_vl
WHERE item_type = :type
ORDER BY sequence
Encontramos que la vista wf_item_attributes_vl se basa en las tablas WF_ITEM_ATTRIBUTES y WF_ITEM_ATTRIBUTES_TL
El problema se generaba porque en la tabla WF_ITEM_ATTRIBUTES había un registro que no tenía su correspondiente en la tabla WF_ITEM_ATTRIBUTES_TL (considerar que la vista wf_item_attributes_vl filtra los datos de acuerdo al lenguaje de la sesión, usando userenv('LANG') )
Creando el registro faltante en la tabla WF_ITEM_ATTRIBUTES_TL, los datos del atributo aparecieron en la vista wf_item_attributes_vl, y el problema desapareció.
En nuestro caso el verdadero problema se originó por haber manipulado los datos de definición de atributos directamente desde las tablas y no a través de WF Builder
Saludos
SV

Similar Messages

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

Custom Connection Manager only works in 32bit- 0xC0011008: Error loading from XML

I have a very basic / stripped connection manager with only one property (SSIS 2012). It works fine in design time (you can open the connection manager editor and change the value), but in runtime it only works in 32bit mode. The runtime-validate-method
does work, but if everything validates OK then in 64bit it throws an error when you run the package:
Exception deserializing the package "The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information
can be stored.". This occurs when CPackage::LoadFromXML fails.
The 2 VS projects are .Net 4 class library projects with the Build Platform on "Any CPU"
I only add references to:
Microsoft.SqlServer.ManagedDTS - C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.ManagedDTS\v4.0_11.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.ManagedDTS.dll
Microsoft.SqlServer.Dts.Design - C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.Dts.Design\v4.0_11.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.Dts.Design.dll
Compiled DLL's are available in GAC and SQL Server connections folder:
I made the sourcecode available via codeplex:
https://ssisconnectionmanager.codeplex.com/SourceControl/latest#myFirstConnectionManager/2012/myFirstConnectionManager/myFirstConnectionManager.cs
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

AppPrincipal (identity) related? Hint http://serverfault.com/questions/339747/the-package-failed-to-load-due-to-error-0xc0011008-error-loading-from-xml
Arthur My Blog
Hi Arthur,
Looks like something similar (same message, same 64bit issue), will try that tomorrow! But sounds weird that you should tell SSIS which identity to use...
Found the same thread in MSDN:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/47d185d3-c801-45cf-becd-3c2524d98353/the-package-failed-to-load-due-to-error-0xc0011008-error-loading-from-xml?forum=sqlintegrationservices
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Error loading from 0BAP_TABLE_14ROC

Hi experts, when I want to run a Statistic Report (for example : Process status) from BI administration cockpit on production environment I get this message : Error loading from 0BAP_TABLE_14ROC. On the others environments, everything is ok. Who can help ? Thanks a lot

Hello Guru's,
I am also getting the same error while running the webtemplates for BI admin cockpit. I am not getting any error while running queries.
Please advice what needed to be done.
Thanks
Aman

SSIS packages deployment error- The package failed to load due to error 0xC0011008 Error loading from XML

I am trying to deploy SSIS packages to file system using manifest file. These packages are upgraded from SSDT 2005 to SSDT 2010. Also I have changed the protection level from 'EncryptSensitiveWithPassword' to 'DontSaveSensitive' to upgrade it.
I coun't complete the deployment and the error details shown below.
TITLE: Package Installation Wizard
Package "Packagename.dtsx" could not be loaded. The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed
error information can be stored.". This occurs when CPackage::LoadFromXML fails.
Package ""Packagename.dtsx" could not be loaded. The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where
detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
ADDITIONAL INFORMATION:
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when
CPackage::LoadFromXML fails.
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when
CPackage::LoadFromXML fails.
BUTTONS:
OK
Please give a solution.
Sreekanth Mohan

Check this
blog post as it gives complete information about error.
It looks like its still using SQL 2005 DTEXEC.exe instead of latest version.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

The package failed to load due to error 0xC0011008 "Error loading from XML....." This occurs when CPackage::LoadFromXML fails

Source environment: Win 7 Enterprise SP1 64bit - SQL Server 2008 R2 SP1 Developer Edition (10.50.2550.0 )
Target environment: Win 2008 R2 Standard SP1 64bit - SQL Server 2008 R2 SP1 Standard Edition (10.50.2500.0
I want to deploy a package with the deployment manifest, but I'm getting an error (during deployment):
Package "D:\Program Files (x86)\Microsoft SQL Server\100\DTS\Packages\Migration\Students.dtsx" could not be loaded.
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can
be stored.". This occurs when CPackage::LoadFromXML fails.
I already remove a fuzzy lookup since this isn't part of the Standard edition, but still getting the error above.
Package Example:
If I just copy the package and try to run it I get this (0xC0010014):
Any suggestions?

Hi SSISJoost,
After installing some update such as MS09-62 (KB970896), the "DTS.dll" and "MsDtsSrvrUtil.dll" may be unregistered. In this issue, the error may occur if the two DLL files are not registered. Here, please register both the 32 bit and 64 bit versions of the
DTS.dll and MsDtsSrvrUtil.dll files, and check the issue again.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

ImageIcons loaded from database don't appear

Hi,
I create a JavaBean to show images from filesystem and database (oracle9i) in a JTable.
The ImageIcons loaded from filesystem appears fine whith my defined DefaultTabelModel.
The ImageIcons read from database (jdbc2) with the same DefaultTabelModel appears in the correct count, but the fields or placholders of the Images, saved as blob, are blank.
The code of my resultset
BLOB myblob = null;
int bufsize = 0;
while(result.next())
myblob = ((OracleResultSet)result).getBLOB("image_container");
bufsize = myblob.getChunkSize();
byte[] buffer = new byte[bufsize];
ImageIcon icon = new ImageIcon(buffer);
Object [] row = {icon};
model1.addRow(row);
model1.fireTableDataChanged();
I don't get any errors.
Thanks
Klaus

Hi,
I changed the datatype from BLOB to 'LONG RAW' for the image in the database.
while(result.next())
byte[] bytes = result.getBytes(1);
String jd = String.valueOf(bytes);
System.out.println(jd);
//get:[B@153 [B@154
//or [B@155 [B@156 for the 2.result
String name = result.getString(2);
System.out.println(name);
//get the correct result
FileOutputStream file = null;
file = new FileOutputStream ("c:\\"+name+".jpg");
file.write(bytes);
//it works fine !!!
ImageIcon icon = new ImageIcon(bytes); //it is correct ?
String ls = String.valueOf(icon.getImageLoadStatus());
String h = String.valueOf(icon.getIconHeight());
String w = String.valueOf(icon.getIconWidth());
System.out.println(h+" : "+w);
//get: -1 : -1
System.out.println(ls);
//get: 4
Object [] row = {icon,name};
//icon is blank, name appears correct in jtable
//but when I need:
//ImageIcon icon = new ImageIcon(AW_Frame.class.getResource("images/emac.jpg"));
//icon and name appears correct in jtable
model1.addRow(row);
model1.fireTableDataChanged();
any ideas ?
Thanks in advance !

Data flow tasks faills while loading from database to excel

Hello,
I am getting error while loading from oledb source to excel and the error as shown below.
Error: 0xC0202009 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (211)" failed because error code 0xC020907B occurred, and the error row
disposition on "input "OLE DB Destination Input" (211)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the
failure.
Error: 0xC0047022 at DFT - Company EX: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (198) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC02020C4 at DFT - Company EX, OLE DB Source 1 [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047038 at DFT - Company EX: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source 1" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Any help would be appreciated ASAP.
Thanks,
Vinay s

You can use this code to import from SQL Server to Excel . . .
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Also, check this out . . .
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "LAPTOP\SQL_EXPRESS" ' Enter your server name here
Database_Name = "Northwind" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM Orders" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A2:Z500")
.ClearContents
.CopyFromRecordset rs
End With
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Finally, if you want to incorporate a Where clause . . .
Sub ImportFromSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim RS As ADODB.Recordset
Set RS = New ADODB.Recordset
Server_Name = "Excel-PC\SQLEXPRESS"
Database_Name = "Northwind"
'User_ID = "******"
'Password = "****"
SQLStr = "select * from dbo.TBL where EMPID = '2'" 'and PostingDate = '2006-06-08'"
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ";"
'& ";Uid=" & User_ID & ";Pwd=" & Password & ";"
RS.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A1")
.ClearContents
.CopyFromRecordset RS
End With
RS.Close
Set RS = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Mulitnumeric limits loading from database

Hi, Sir,
I am trying to use property loader step in TestStand to load multinumeric limits from a database table for different measurements in multinumeric test step. The database table has several columns such as: stepname, measurementname, hi/low limits. To load the limits for different measurement correctly using single property loader step, I have to match both the step name and measurement name in its filtering page. My question is how should I do this? More specific, how can I access the measurement name attached with different loading properties during run time?
I do not find any example for this problem. Most examples seem to be for TestStand 1.0, which has no multinumerica test step type.
Thank you for your help.
Yin

Yin,
In your database, you should have a column for each high and low limit and comparison for each multiple numeric limit test step. For example, if I have 2 measurements in my multiple numeric limit test step, I will have the following columns: StepName, Result_Measurement_0_Comp, Result_Measurement_0_Limits_High, Result_Measurement_0_Limits_Low,
Result_Measurement_1_Comp, Result_Measurement_1_Limits_High, Result_Measurement_1_Limits_Low.
After your database is set up, you would use the property loader step to read the values in during run-time. If you insert a property loader step and configure the Data Location to be a database, you can configure which database and table you want to read from. Then near the bottom of the property loader dialog, there are two fields. One is for Property Name and the other is for Column Name/Number. You use these fields to assign a certain column to a certain property. So for this case, we would choose one of the limit properties that we want to load from the database and assign that to a certain column. For example, the Property Name would be Result.Measurement[0].Comp and its corresponding Column Name/Number would be the database column Result_Measurement_0_Comp. The next Property Name would be Result.Measurement[0].Limits.High and its corresponding Column Name/Number would be the database column Result_Measurement_0_Limits_High. You would continue to assign a particular column to each property that you want to read in.
In using the Property Loader step type, it is immensely helpful to use the Import/Export Properties tool to create the database, Excel file, or text file because the tool will create these files with the correct format. You would then know exactly how many columns and their names because TestStand created them for you. Even if you plan to use a pre-existing source file, just creating the default source file will give you a better idea of how you will need to tailor your pre-existing database or excel or text file.
If you have other questions, let us know.
Regards,
Shannon R.
Applications Engineer
National Instruments

Error while Image loading from database

I'am using generic handler for loading Image from data bases. Its work fine when when I hardcode the ImageID in QureyString when call Handler. But it's giving errors of different type when I dynamically pass value to qurey string(from datatable).
"There is already an open DataReader associated with this Command which must be closed first."
OR
"There is already an open DataReader associated with this Command which must be closed first."
here is a code of Handler
public void ProcessRequest(HttpContext context)
Int64 id = Convert.ToInt64(HttpContext.Current.Request.QueryString["adid"]);
// dt = obj_dalayer.GetRecpDetailsByID(id);
dt=GetRecpDetailsByID(id);
if (dt.Rows.Count > 0)
//context.Response.ContentType = "image/jpeg";
context.Response.BinaryWrite((byte[])dt.Rows[0][2]);
public DataTable GetRecpDetailsByID(Int64 reid)
try
obj_DB.Open();
obj_sqlcmd = new SqlCommand("GetRecpDetailsByID", obj_DB.GetDBConnection());
obj_sqlcmd.CommandType = CommandType.StoredProcedure;
obj_sqlcmd.Parameters.Add(new SqlParameter("@rid", reid));
obj_sqlda = new SqlDataAdapter();
obj_dt = new DataTable();
obj_sqlda.SelectCommand = obj_sqlcmd;
obj_sqlda.Fill(obj_dt);
return obj_dt;
finally
obj_DB.Close();
And here is a HTML and ServerSide code on ASPX page of call handler.
<img id="img2" alt="Image" runat="server" src='<%#"~/ImageReqHandler.ashx?adid="+Eval("ReID")%>' width="179" height="148" /
I'm using Eval("ReID") to get ID of Image from datatable.

Ayez,
This is the VB forum, try it in the C# form.
http://social.msdn.microsoft.com/Forums/en-US/csharpgeneral
However, there they will probably tell you that although your problem is C#, it is ASP.Net some programmers become scared if it is Web you know.
Success
Cor

Error:loading from external table to database table

hi,
Following error comes while inserting data from external to new_ext table
what might be the reason??
error and external table creation script is as follows
regards,
Avinash
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04020: found record longer than buffer size supported, 524288, in
/home/oracle/rgtr1.txt
ORA-06512: at " SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
ORA-06512: at "PRODNDBA.PROC_RGTR1", line 513
ORA-06512: at line 1
external table script is as follows:
DROP
TABLE EXT_TABLE_RGTR1 CASCADE CONSTRAINTS;
CREATE
TABLE EXT_TABLE_RGTR1
ID
VARCHAR2(10 BYTE),
PC
VARCHAR2(2 BYTE),
BU
VARCHAR2(4 BYTE),
CONSUMER_NO
VARCHAR2(12 BYTE),
CUR_READING1
NUMBER,
CUR_READING2
NUMBER,
ADJ_CONS1
NUMBER,
ADJ_CONS2
NUMBER,
TOT_EC
NUMBER,
TOT_FCA
NUMBER,
TOT_ED
NUMBER,
ADDLESS_AMT
NUMBER,
NETBILL_AMT
NUMBER,
ADJ_UNIT1
NUMBER,
ADJ_UNIT2
NUMBER,
TARIFF_CODE
NUMBER,
DUTY_CODE
NUMBER,
DISCONN_TAG
VARCHAR2(1 BYTE),
MIN_CHRG_IND
VARCHAR2(1 BYTE),
OC_CODE1
VARCHAR2(1 BYTE),
OC_CODE2
VARCHAR2(1 BYTE),
OC_AMT1
NUMBER,
OC_AMT2
NUMBER,
PREV_DPC
NUMBER,
CREDIT_AVG_BILL
NUMBER,
ADJ_TYPES
NUMBER,
ADJ_EC_FCA
NUMBER,
ADJ_ED
NUMBER,
ADJ_AMT1
NUMBER,
ADJ_AMT2
NUMBER,
ADJ_AMT3
NUMBER,
ADJ_AMT4
NUMBER,
ADJ_AMT5
NUMBER,
ADJ_AMT6
NUMBER,
ADJ_AMT7
NUMBER,
ADJ_AMT8
NUMBER,
MR_CYCLE
VARCHAR2(2 BYTE),
NOTICE
VARCHAR2(2 BYTE),
INSTAL_IND
VARCHAR2(1 BYTE),
LAST_RCPT_DT
VARCHAR2(6 BYTE),
MS1
NUMBER,
MS2
NUMBER,
ARR_PL_CR
NUMBER,
PREV_READ1
NUMBER,
PREV_READ2
NUMBER,
OLD_CONS_NUM
VARCHAR2(16 BYTE),
MTR_CODE1
VARCHAR2(2 BYTE),
MTR_CODE2
VARCHAR2(2 BYTE),
ABR_EC1
NUMBER,
ABR_FCA1
NUMBER,
REV_CAT
VARCHAR2(2 BYTE),
BILL_DT
DATE,
SD_PAID
NUMBER,
SD_ARRS
NUMBER,
SD_ADDL
NUMBER,
PR_RDNG_IND1
VARCHAR2(1 BYTE),
PR_RDNG_IND2
VARCHAR2(1 BYTE),
NAB_IND
VARCHAR2(1 BYTE),
CONN_LOAD
NUMBER,
OLDEST_OS_DT
VARCHAR2(4 BYTE),
ABR_RECAMT1
NUMBER,
METER_RENT
NUMBER,
EX_DUTY
NUMBER,
TDL_CHARGES
NUMBER,
ABR_MTH
VARCHAR2(4 BYTE),
READING_IND
VARCHAR2(1 BYTE),
FB_IND
VARCHAR2(1 BYTE),
ADJ_AMT
NUMBER,
MTR_NUM1
NUMBER,
MTR_NUM2
NUMBER,
AVG_UNITS1
NUMBER,
AVG_UNITS2
NUMBER,
MIN_BILL_AMT
NUMBER,
METER_COST_DEMANDED
NUMBER,
MF1
VARCHAR2(2 BYTE),
MF2
VARCHAR2(2 BYTE),
MR
VARCHAR2(2 BYTE),
ROUTE
VARCHAR2(4 BYTE),
SEQ
VARCHAR2(4 BYTE),
DISC_IND
VARCHAR2(1 BYTE),
FREEZE_CODE
VARCHAR2(1 BYTE),
MTH40
NUMBER,
CONCES_EC
NUMBER,
METER_COST_ARREARS
NUMBER,
METER_COST_PAID
NUMBER,
SANCTION_LOAD
NUMBER,
PENALTY_ON_CL
NUMBER,
CL_SLB
NUMBER,
UNTSLB
NUMBER,
CAPACIT_PENALTY
NUMBER,
ARREARS_OF_INT
NUMBER,
INT_ON_ARREARS
NUMBER,
FIXED_CHARGES
NUMBER,
ASSESSED_DPC
NUMBER,
FCA_UNT_OLD
NUMBER,
FCA_UNT_NEW
NUMBER,
DEFECT_RDN1
NUMBER,
DEFECT_RDN2
NUMBER,
CAP_CT_RENT
NUMBER,
CT_RENT
NUMBER,
ADV_BILL_IND
VARCHAR2(1 BYTE),
ADV_BILL_RD_IND
VARCHAR2(1 BYTE),
INST_IND
VARCHAR2(1 BYTE),
CONSCUR_STATUS
VARCHAR2(1 BYTE),
MTR_COST1
NUMBER,
MTR_COST2
NUMBER,
MTR_COST3
NUMBER,
LOOM_NOS
NUMBER,
CONS_OLD_TARIFF
NUMBER,
CONS_NEW_TARIFF
NUMBER,
PD_TD_DATE
VARCHAR2(6 BYTE),
ED5
VARCHAR2(10 BYTE),
ED6
VARCHAR2(10 BYTE),
ED8
VARCHAR2(10 BYTE),
B66_AMT1
NUMBER,
BILL_MTH
VARCHAR2(6 BYTE),
STD_MTH
NUMBER,
PREV_RD_MTH
VARCHAR2(4 BYTE),
ACCT_HD_TRF
VARCHAR2(2 BYTE),
ADM_CODE
NUMBER,
BILL_DUE_DATE
DATE,
EC_DUTY
NUMBER,
ABNOR_IND
VARCHAR2(1 BYTE),
TRF04_CONN_LOAD
NUMBER,
PROCESS_DT
DATE,
SUPPLY_DATE
VARCHAR2(6 BYTE),
BILL_DT_FROM
DATE,
RECEIPT_AMT
NUMBER,
LOCKED_CR_UNITS
NUMBER,
LOCKED_CHARGES
NUMBER,
LOCKED_ED
NUMBER,
LOCKED_FCA
NUMBER,
LOCKED_FC
NUMBER,
LOCKED_RLCHARGES
NUMBER,
LOCKED_CL
NUMBER,
LOCKED_ECEDFIX
NUMBER,
LOCKED_ACC_MONTH
NUMBER,
AVG_OLD_CONSMP
NUMBER(6),
AVG_SINCE
VARCHAR2(4 BYTE),
AVG_OCCURANCES
NUMBER(2),
AVG_MA_IND
VARCHAR2(1 BYTE),
MTR1_PHASE
NUMBER(1),
MTR_PHASE1
VARCHAR2(1 BYTE),
MTR2_PHASE
NUMBER(1),
IND_CAT
VARCHAR2(1 BYTE),
L61_TARIFF
NUMBER(2),
MTR_CHG_AMT1
NUMBER(12),
NO_OF_MONTHS
NUMBER,
MTR_CHG_AMT2
NUMBER(12),
B66_AMT
NUMBER(10),
ADJ_AMT11
NUMBER,
B66_ADJ_TYP
VARCHAR2(1 BYTE),
B60_AMT
NUMBER(10),
ADJ_AMT13
NUMBER,
B60_ADJ_TYP
VARCHAR2(1 BYTE),
CPF_NO
NUMBER(8),
ADJ1
NUMBER(9),
ADJ2
NUMBER(9),
ADJ3
NUMBER(9),
ADJ4
NUMBER(9),
ADJ5
NUMBER(9),
ADJ6
NUMBER(9),
ADJ7
NUMBER(9),
ADJ8
NUMBER(9),
ADJ11
NUMBER(9),
ADJ13
NUMBER(9),
DTC_CODE
VARCHAR2(7 BYTE),
TITLE
VARCHAR2(8 BYTE),
NAME
VARCHAR2(36 BYTE),
ADDRESS1
VARCHAR2(26 BYTE),
ADDRESS2
VARCHAR2(26 BYTE),
VILLAGE
VARCHAR2(14 BYTE),
PIN
VARCHAR2(6 BYTE),
LOCK_SINCE
VARCHAR2(4 BYTE),
FAULTY_SINCE
VARCHAR2(4 BYTE),
MTR_DIGIT1
VARCHAR2(1 BYTE),
MTR_DIGIT2
VARCHAR2(1 BYTE),
FCA_PAISE
NUMBER(9),
GTY_EXP_DT
VARCHAR2(6 BYTE),
REJ_READ_MTR1
NUMBER(6),
REJ_READ_MTR2
NUMBER(6),
REJ_ADJ_UNITS1
NUMBER(6),
REJ_CONSMP
NUMBER(6),
OWNER_CODE
NUMBER(1),
MTR_CAP_AMP
NUMBER(1),
MTR_A
VARCHAR2(1 BYTE),
MTR_C
VARCHAR2(1 BYTE),
MTR_D
VARCHAR2(1 BYTE),
MTR_E
VARCHAR2(1 BYTE),
CUT_OF_DT
DATE,
POLE
VARCHAR2(6 BYTE),
EDRATE
NUMBER(9),
AREA
VARCHAR2(1 BYTE),
MTR_BRAND1
VARCHAR2(2 BYTE),
MTR_BRAND2
VARCHAR2(2 BYTE),
LC1
NUMBER(3),
POWER_CUT_IND
VARCHAR2(1 BYTE),
SERVICE_DT
DATE,
ADJ_UNIT11
NUMBER,
ADJ_UNIT22
NUMBER,
RECEIPT_AMT1
NUMBER,
MTR1
NUMBER,
STRK_BLL_AMT
NUMBER,
DUTY_UNTS1
NUMBER,
DUTY_AMT1
NUMBER,
DUTY_UNTS2
NUMBER,
DUTY_AMT2
NUMBER,
DUTY_UNTS3
NUMBER,
DUTY_AMT3
NUMBER,
ADJ_UNIT_45
NUMBER,
ADV_BIL_EC
NUMBER,
NEW_DUTY_RATE
NUMBER,
NEW_DUTY_UNTS
NUMBER,
NEW_DUTY_AMT
NUMBER,
DPC_PAB
NUMBER,
MS9_SINCE
VARCHAR2(4 BYTE),
DISTRICT_CODE
NUMBER(2),
TAX_ON_SALE
NUMBER,
LOCKED_CHARGES_TSE
NUMBER
ORGANIZATION
EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DIR
ACCESS PARAMETERS
( records delimited by newline
badfile
'ext.bad'
logfile 'ext.log'
fields
ID POSITION
(1-4),
PC POSITION
(7-7),
BU POSITION
(8-11),
CONSUMER_NO POSITION
(18-29 ),
CUR_READING1 POSITION
(33-41 ),
CUR_READING2 POSITION
(42-50 ),
ADJ_CONS1 POSITION
(51-59 ),
ADJ_CONS2 POSITION
(60-68 ),
TOT_EC POSITION
(69-86),
TOT_FCA POSITION
(87-104 ),
TOT_ED POSITION
(105-122 ),
ADDLESS_AMT POSITION
(123-140 ),
NETBILL_AMT POSITION
(141-158 ),
ADJ_UNIT1 POSITION
(159-167 ),
ADJ_UNIT2 POSITION
(168-176 ),
TARIFF_CODE POSITION
(177-178 ),
DUTY_CODE POSITION
(179-180 ),
DISCONN_TAG POSITION
(181-181 ),
MIN_CHRG_IND POSITION
(182-182 ),
OC_CODE1 POSITION
(183-183 ),
OC_CODE2 POSITION
(184-184 ),
OC_AMT1 POSITION
(185-202 ),
OC_AMT2 POSITION
(203-220 ),
PREV_DPC POSITION
(221-238 ),
CREDIT_AVG_BILL POSITION
(239-256 ),
ADJ_TYPES POSITION
(257-264 ),
ADJ_EC_FCA POSITION
(265-282 ),
ADJ_ED POSITION
(283-300 ),
ADJ_AMT1 POSITION
(301-318 ),
ADJ_AMT2 POSITION
(319-336 ),
ADJ_AMT3 POSITION
(337-354 ),
ADJ_AMT4 POSITION
(355-372 ),
ADJ_AMT5 POSITION
(373-390 ),
ADJ_AMT6 POSITION
(391-408 ),
ADJ_AMT7 POSITION
(409-426 ),
ADJ_AMT8 POSITION
(427-444 ),
MR_CYCLE POSITION
(445-446 ),
NOTICE POSITION
(447-448 ),
INSTAL_IND POSITION
(449-449 ),
LAST_RCPT_DT POSITION
(453-458 ),
MS1 POSITION
(459-459),
MS2 POSITION
(460-460),
ARR_PL_CR POSITION
(461-478 ),
PREV_READ1 POSITION
(479-487 ),
PREV_READ2 POSITION
(488-496 ),
OLD_CONS_NUM POSITION
(497-512 ),
MTR_CODE1 POSITION
(513-514 ),
MTR_CODE2 POSITION
(515-516 ),
ABR_EC1 POSITION
(517-534 ),
ABR_FCA1 POSITION
(535-552 ),
REV_CAT POSITION
(553-554 ),
BILL_DT POSITION
(555-560 ) DATE "DDMMYY",
SD_PAID POSITION
(561-569 ),
SD_ARRS POSITION
(570-578 ),
SD_ADDL POSITION
(579-587 ),
PR_RDNG_IND1 POSITION
(588-588 ),
PR_RDNG_IND2 POSITION
(589-589 ),
NAB_IND POSITION
(590-590 ),
CONN_LOAD POSITION
(592-600 ),
OLDEST_OS_DT POSITION
(601-604 ),
ABR_RECAMT1 POSITION
(605-622 ),
METER_RENT POSITION
(623-631 ),
EX_DUTY POSITION
(632-649 ),
TDL_CHARGES POSITION
(632-649 ),
ABR_MTH POSITION
(650-651 ),
READING_IND POSITION
(652-652 ),
FB_IND POSITION
(653-653 ),
ADJ_AMT POSITION
(654-671 ),
MTR_NUM1 POSITION
(672-681 ),
MTR_NUM2 POSITION
(682-691 ),
AVG_UNITS1 POSITION
(692-700 ),
AVG_UNITS2 POSITION
(701-709 ),
MIN_BILL_AMT POSITION
(710-727 ),
METER_COST_DEMANDED POSITION
(710-727 ),
MF1 POSITION
(728-729),
MF2 POSITION
(730-731),
MR POSITION
(732-733),
ROUTE POSITION
(734-737),
SEQ POSITION
(738-741),
DISC_IND POSITION
(742-742 ),
FREEZE_CODE POSITION
(743-743 ),
MTH40 POSITION
(744-752),
CONCES_EC POSITION
(753-770 ),
METER_COST_ARREARS POSITION
(753-770 ),
METER_COST_PAID POSITION
(771-788 ),
SANCTION_LOAD POSITION
(789-797 ),
PENALTY_ON_CL POSITION
(798-815 ),
CL_SLB POSITION
(816-817 ),
UNTSLB POSITION
(818-819 ),
CAPACIT_PENALTY POSITION
(820-837 ),
ARREARS_OF_INT POSITION
(838-855 ),
INT_ON_ARREARS POSITION
(856-873 ),
FIXED_CHARGES POSITION
(874-891 ),
ASSESSED_DPC POSITION
(892-909 ),
FCA_UNT_OLD POSITION
(910-927 ),
FCA_UNT_NEW POSITION
(928-945 ),
DEFECT_RDN1 POSITION
(982-990 ),
DEFECT_RDN2 POSITION
(991-999 ),
CAP_CT_RENT POSITION
(1000-1008 ),
CT_RENT POSITION
(1009-1017 ),
ADV_BILL_IND POSITION
(1018-1018 )
LOCATION
(EXT_DIR:'rgtr1.txt')
REJECT
LIMIT UNLIMITED
LOGGING
NOCACHE
NOPARALLEL;

KUP-04020: found record longer than buffer size supported, number, in string
Cause: a record in the data source was longer than the maximum data size supported. The number reported is the maximum supported size of a record.
Action: none
Examine your bad file and log files for details of the rows which failed from insertion.

Error loading from flat file

Hello Everyone,
I loaded an InfoObject from a flat file. This infoobject has 3 attributes. The order of the fields in the file is in sync with Communication structure. I am getting the following errors for data of one attribute.
'Lowercase' indicator is checked for the ZDES attribute.
Value 'IndCp' for characteristic ZDES contains invalid characters: RRSV 7
ZDES: Data Record 1 (A123): Version 'IndCp' is not valid: RSDMD 194
'A123' is the value of the first records of the parent infoobject.
We are on BW 3.0B. SP 18.
Thanks.

Hi Sachin :
SAP Note :681084
Initial value '#' for attribute not saved
Symptom
Transaction RSDMD, select infoObject. In the maintenance screen,
select multiple records and click on change. Set the value of an attribute to initial ie '#'. The '#' value is taken as the value of the attribute. If we try to save the data with '#', the RSDMD 194 and RRSV 007 messages are thrown. For eg. "Value '#' for characteristic ZUS_ATTR1 contains invalid characters". The correction instructions number for
this fix is 307536.
The same symptom is found when the LIST->CHANGE ALL RECORDS option is
selected. The error messages RSDMD 194 and RRSV 007 are thrown when we
try to save the data with the '#' value. The correction instruction
number for this fix is 610014.
The same problem is noticed when a new entry is created using the
RSD1 transaction with an '#' value. The correction instruction number
for this fix is 335642.
Check this Note.,
Hope this helps,
Sudh

Security Error: Loading from localhost

I have setup crossdomain.xml policy files on the server, and one in my localhost root directory. I've tried throwing every wild card at them, which works with other domains, but with the localhost server, it continues to fail. Anyone know how to resolve this?
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="*" headers="*" secure="false"/>
<allow-access-from domain="*" />
</cross-domain-policy>
SecurityError: Error #2121: Security sandbox violation: LoaderInfo.content: http://localhost:8887/ cannot access http://mydomain.com/loadthis.swf. This may be worked around by calling Security.allowDomain.

Ah, the loaded swf requries the allowDomain, regardless of whether it has any code in it.
http://livedocs.adobe.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveD ocs_Parts&file=00002647.html

Error message from database stored procedures

I would like to have some error message show at client side from stored procedures.
I use MS SQL Server and use RAISEERROR, but ColdFusion does not bring the error message just ignore the error continue to run the other part of code.
I just want to know are there any way to bring stroed procedure error message to client, or I have to trap the error at Web Server or JavaScript level.
Your help and information is great appreciated,
Regards,
Iccsi,

Just wrap your cfstoredproc in a cftry/cfcatch. See this for an example:
http://stackoverflow.com/questions/1879754/accessing-raiseerror-message-from-cfstoredproc
There's no way your javascript can trap this server-side error though, unless you were calling your CFM page that calls the stored proc via an AJAX request.

Capturing Custom Error Messages from Database Triggers

Hi Everybody
When i fired a trigger it should show only the custom message from RAISE_APPLICATION_ERROR
instead of showing all the message....
ORA-20103: We Cannot Delete the emp_id 5610
ORA-06512: at "emp_id", line 89
ORA-04088: error during execution of trigger 'delete_emp_id.trg'I want to show only the custom message
We Cannot Delete the emp_id 5610Thanks in Advance

Not possible AFAIK.
Instead of RAISE_APPLICATION_ERROR, define a custom exception, call it and just print it onto the console (using dbms_output). You can't pop it out though.

Error loading from database

Similar Messages

Maybe you are looking for