Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32

Hallo zusammen,
wir Arbeiten hier mit LV-RT (8.5) und ProveTech TA, von der Firma MBtech.
Die Frima MBtech liefert dazu eine dll dür den Datenaustausch zwischen beiden Systemen.
Seit dem Update der dll auf eine neuere Version bekommen wir immer folgende Fehlermeldung:
Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32.DLL'
Meine Anfrage bei MBtech hat folgendes ergeben, vielleicht können sie mir diesbezüglich weiter helfen?
Besten Dank schonmal im voraus!
Anfrage:
beim Update von ProveTech auf die Version 2009SE wurde auch eine neue ModelCom.DLL zur Verfügung gestellt. Diese verursacht jedoch immer einen Absturz des LabView-Realtime Betriebssystems.
Fehlermeldung:
Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32.DLL'
Wurden in der neuen ModelCom.DLL vielleicht neue Funktionen programmiert,
die auf (von LabView-Realtime) nicht unterstützte Windows-API-Funktion zugreifen?
MBTech:
Die Untersuchung der Abhängigkeit zu GetModuleHandleW hat ergeben, dass
diese Abhängigkeit seit der Verwendung des Visual C++ 2008 Compilers existiert (statt Visual C++ 2005).
Zu welchen Visual C++ Compiler-Versionen ist LabVIEW-RT kompatibel?
Bald kommt der Release von Visual C++ 2010.

Hallo Manuel.W,
bitte entschuldigen Sie, dass es etwas länger gedauert hat.
Grundsätzlich unterstützen wir LabVIEW und LabWindows/CVI als Entwicklungsplattform für unsere Real-Time-Systeme.
Für andere Entwicklungsumgebungen können wir aus verständlichen Gründen keinen Support leisten.
Windows-DLLs, welche mit anderen Entwicklungsumgebungen (als die beiden oben genannten) erstellt wurden, können auf Pharlap-basierten Real-Time-Systemen lauffähig sein, müssen es allerdings nicht.
Das folgende Utility liefert einen ersten Ansatzpunkt, indem es die Funktionsaufrufe (Calls) der DLL testet.
How Can I Verify that My DLL is Executable in LabVIEW Real-Time?
http://digital.ni.com/public.nsf/allkb/0BF52E6FAC0BF9C286256EDB00015230
Ansonsten können vielleicht noch folgende Hinweise helfen:
Can LabVIEW Real-Time Interface With External Code?
http://digital.ni.com/public.nsf/allkb/2EA49B05E67DDECF86256F9A006FB315?OpenDocument
Are there any tips or guidlines when creating DLLs for a Destop RT target (using Visual Studio C++)
http://forums.ni.com/ni/board/message?board.id=170&message.id=423544&requireLogin=False
Can I Use a Free Compiler with Simulation Interface Toolkit (SIT)?
http://digital.ni.com/public.nsf/allkb/AAD15283A1F051A1862574F000744DBD?OpenDocument
CVI RT Missing Export Error when using a DLL from VS2008
http://forums.ni.com/ni/board/message?board.id=180&message.id=41001&requireLogin=False
Dann hoffe ich, dass diese Informationen hilfreich waren.
Mit freundlichen Grüßen
i. A. Ralf N.
Application Engineering,
GERMANY

Similar Messages

Error loading 'ole32.dll': Missing export '_resetstkoflw' from 'MSVCRT.DLL'

I'm getting the RT error:
Error loading 'ole32.dll': Missing export '_resetstkoflw' from 'MSVCRT.DLL'
LabVIEW RT 2011
I've reinstalled RT several times but am still seeing the error.
I only see it after closing my application.
I've attached a report of my RT system.
Any ideas on what I might be missing?
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit
Attachments:
ni_support.zip ‏1110 KB

Hello Robert,
I wasn't able to find too much about this error on our end, but doing a wider search it seems errors involving MSVCRT.DLL usually take place when this Microsoft C Runtime Library file is replaced by a third-party file that lacks "_resetstkoflwfunction". It's odd that the error occurs only after closing the application. Here is a third-party website I was able to find which explains this in a bit more detail, and might be a fix to try if your are comfortable: How to Fix Common Msvcrt.dll Errors?
Regards,
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments

Error Loading DLL: Missing export

Hey,
I'm having a problem running an RT DLL (call it file2) that uses an RT DLL (call it file1) that uses nixnet. When I try to debug file2, I get the error message:
Error loading 'file1.dll': Missing export 'nxClear' from 'file1.dll'
I know that the linking is somehow messed up because nxClear is not a function in file1.dll. It's a function from the nixnet library. I would think that nxClear would be an import for file1.dll so it seems like I haven't got something setup correctly. To include the nixnet library in file1.dll, in the .c file that uses it all I have done is #include "nixnet.h" and this has been sufficient for debugging file1.dll. But now that I'm using file1.dll in file2.dll it seems confused about where nxClear comes from.
How do I link stuff in file1.dll correctly?
Any help is appreciated,
Kevin Key

I discovered that I had to include the nixnet.lib file in the project. Although, it's not necessary for other ni libraries (for instance nidaqmx) because they must be linked in correctly.

I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Error Loading lvdaq.dll

Hello LabView Discussion forum.
I am currently using LabView 2009. My research supervisor has been attempting to open Legacy files from Labview 7.1 on the more modern version, with no success. After doing a little research, I found that I needed to download Traditional DAQ in order to get the newer version of LabView to open the older file. I first downloaded the DAQ for 7.4.1 and installed it with setup.exe, after which I attempted to open the program. I got the "Error loading lvdaq.dll... Initialization failed" error. I then downloaded 7.4.4, thinking perhaps it would be a better version. Same error. I am now downloading version 7.1 (an earlier legacy DAQ), thinking that perhaps the version numbers ought to match up from the origin of the older file to the legacy DAQ I have to run it. Hopefully this will work (and if it does I will simply delete my post), however if it doesn't, I shall update my post, and hopefully get some help figuring out what needs to be done.
I thank you in advance for any assistance rendered.
Solved!
Go to Solution.

I had quite a few "Can't find file" errors, which we fixed by manually browsing through the library files (.llb) and finding the files in question.
Once all of the files were found, I attempted to load the program, and I got a (nidaq.32) error, which we fixed by downloading the legacy version of DAQ.
Once this had been done, I attempted to load the program again, only to get the error consistent with my post title.
The error comes up when I attempt to open the VI, not just when I load LabView.
As you said, it might be that version 9 simply is unable to, but I don't know why that would be the case. Lack of backwards compatibility in a software like this doesn't seem to make very much sense.
I'll check it though. Thank you very much good sir! I'll update the thread if I find that version 9 is indeed not compatible.

RUNDLL Error loading CTMBHA.DLL invalid access to memory locat

Error message at start up:? "Error loading CTMBHA.DLL? Invalid access to memory location"
Does anyone know if this file has to do with Sound Blaster Audigy ADVANCED MB Ready, DR release 5.0.3708 ??If so, I will follow the reinstall instructions per the FAQ.?Thanks.

Here's the solution from the_Riddler that works:?So I broke out REGMON from sysinternals, and tried the install when the Status 200 error came up I saw that they were accessing the "C:\Documents and Settings\All Users\Application Data\Creative Labs\Licenses" directory.. So I went to the Directory and renamed the B3420000.dat file there to B3420000.dat.old?Then did another reinstall and sure enough the application continued and allowed me activate the product and continue the install..

What causes inconsistent error: Error loading "mydll.dll" Invalid access to memory location.

I have a set of sample code vis which are wrappers around an external dll using the call library function nodes. These work in all versions of LabVIEW from 6.1 to 8.2. In version 8 and 8.2, there is an inconsistent error which appears after a vi is opened, run successfully, closed and then re-opened some time later - all without closing LabVIEW. The error is reported without an error number as 'Error loading "myDll.dll". Invalid access to memory location.' If LabVIEW is closed, reopened and the vi loaded again and run, it works fine. The same error occurs if a second vi calling the same .dll is loaded and run after the first is successful.
Since the vi works just fine the first time it is opened, why does this error occur the second time? What do I have to change so that I don't have to close LabVIEW every time I want to run a different VI?
Thanks in advance.
Mike.

Mea culpa. We have found a fix for this. It relates to our dll structure. We create a message pump in the dll associated with a hidden window. When the dll is initialized, the window is registered with the operating system. When the dll is unloaded, the window is closed but we weren't de-registering it. This caused the problem the second time the dll was loaded. By de-registering when the dll is unloaded, the problem has been solved.
Mike.

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Install failed "APS DAEMON.EXE error. MSVCR80.dll missing" and "iTunes not installed correctly. Error 7

How do I correct Install failed "APS DAEMON.EXE error. MSVCR80.dll missing" and "iTunes not installed correctly. Error 7

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100246)

Install failed "APS DAEMON.EXE error. MSVCR80.dll missing"

ran the update - install failed "APS DAEMON.EXE error. MSVCR80.dll missing"
Now iTunes is not installed nor running

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error message storing.dll missing

After having had some problems with an external back up system I get the message ''error message storing.dll missing''.
My question is how to solve this problem? Must I download this file and where and how to install?
Please?
Floris

Hello @ftk1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook computer is displaying an error message of a missing "storing.dll" file. Is the backup you created using HP or 3rd party software? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Error 7 & MSVCR80.DLL Missing--what to do?

Unable to reinstall itunes after clicking on its update.
Error 7 message appeared along with "can't start because MSVCR80.DLL IS MISSING. Reinstall it!
Went to .NET Framework and message states it's already installed for 4.5.1 version and won't allow a reinstall.

Hello Boater102,
It sounds like you are unable to open iTunes due to this error message. I recommend the troubleshooting from the following article named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Take care,
Sterling

Error loading jvm.dll - urgent!!

Hi,
When I try to compile using javac, I get an error as stated below:
Error loading: y:\sys\nt\j2sdk-1_3_1\jre\bin\hotspot\jvm.dll
What am I missing?
Thanks

check if jvm.dll exists in y:\sys\nt\j2sdk-1_3_1\jre\bin\hotspot. May not be a good solution but try to uninstall and re-install j2sdk. Also check ur CLASSPATH settings
Vinay

Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32

Similar Messages

Maybe you are looking for