Error logging into runtime user

My coworker recently added a new windows agent that is on a different domain than her Tidal master and is getting the error
*** Error logging into runtime user    when she tries to run a job through Tidal. 
She verified that the runtime user has the proper rights on the agent server, she logged onto the agent as the runtime user and ran the script from the job manually and it ran successfully.
Is there a known problem with using a runtime user that was created in domainA but trying to run a job on an agent server in domainB?
Thanks

It turns out that the problem was with the userid the agent service was running under.  She changed the service to run with the Local System credentials and the problem was solved.

Similar Messages

  • After Time Machine backs up my file vault files (after logging out), when I next log into the user account it beachballs permanently during log in.

    After Time Machine backs up my file vault files (after logging out), when I next log into the user account it beachballs permanently during log in.  The backup was successful, as I had to restore after this issue last time.  Hard resetting doesn't resolve the issue.  Is there a Time Machine setting that I should be aware of?
    I have 2011 13" MBP, 10.6.8 and use an external hard drive connected via USB for my Time Machine backups.
    Thanks

    I was able to get it to work.  Thanks for your help.  It's unfortunate the two applications do not work well together.  This is what I did:
    1) Safe boot and logged into the affected user (since the whole issue damaged the account's system settings).
    2) Turned off File Vault in System Preferences. I needed to make some space on the hard drive first since apparently the total free space on the hard drive has to equal or exceed the amount of data currently in the file vault.  I deleted some files and moved others to the Admin account.  This whole process took awhile.
    3) Finally, just restarted and logged in.  The next time machine backup seems to be a significant backup, I assume because it's backing up the user account in a different way now that File Vault is turned off.
    Thanks again!

  • Unable to log into the user management administration web console

    Can someone tell how resolve my ablity to log into the user management administration web console? I can't log into SAP Netweaver Admin,  User managment, and Webdynpro content Administrator and Web Dynpro Consol. But able active j2ee engine sample? Is there some that I need activate to allow me log in? 
    http://localhost:50000/logon/logonServlet?redirectURL=%2Fuseradmin%2FuserAdminServlet%3FgotoDefaultPage%3D.

    Hi,
    I had this problem also. For me it worked to log on to the SLD and then I was able to log on to the other applications like Useradmin and NWA.
    The SLD is usually available at <a href="http://localhost:50000/sld">http://localhost:50000/sld</a>.
    Regards,
    Sebastian

  • Cannot log into my user account

    After rebooting the MPro I am unable to log into my acount. The system comes up to the login screen and on entering the password to my account it thinks for a while and then cycles back to the login screen. If i enter a wrong password - system rejects it. I can log into guest user though

    Symptom: After applying an update or some kind of instance where a shutdown occurred, upon rebooting, Mac OS X will demand a password for System.keychain. No password will ever work, not even root.
    NOW FOR THE SOLUTION...
    WARNING: This assumes that you are competent with the command line AND you have a working copy of OS X somewhere else nearby, preferably on an external disk partition. I'm not going to explain the basics of using the Terminal or how to access both of your systems at the same time. If you are afraid of screwing up, simply reinstall Mac OS X and say a few prayers that it will fix itself (assuming that another Software Update won't mess it up again).
    The problem lies with a file deep in the bowels of OS X. It's /var/db/SystemKey. What it does is that it tells Mac OS X how to unlock the system keychain. It only knows the System.keychain specific to the computer, so if you import another System.keychain as a replacement, SystemKey won't know how to unlock it and you'll keep getting the annoying dialogs prompting for System.keychain's password.
    So without further ado, this is how to stop the annoying dialogs once and for all:
    1. AS THE ROOT USER, you will need to copy over /var/db/SystemKey from a known good system to your problematic system. Make sure that you preserve the permissions (0400). It is advisable that you are NOT booted from your problematic system.
    2. If you have a good System.keychain, copy that over to /Library/Keychains on the problem system. If you accidentally deleted System.keychain, you can execute the following (again AS ROOT):
    /usr/sbin/systemkeychain -C -f
    This creates a new, working, empty System.keychain and effectively overwrites the old keychain.
    3. Reboot to your system. You will be presented with different, more familiar (Change, Change All) dialogs. If you had any passwords saved in your list of preferred networks, just put them back in.
    Tutorial: Resolving Keychain Issues
    If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
    First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
      1. Open Keychain Access (located in Applications/Utilities)
      2. Go to the "Keychain Access" menu and select "Preferences"
      3. Click the "First Aid" tab
      4. Make sure the "Synchronize login keychain password" box is checked
      5. Close the Preferences window
      6. Go to the "Keychain Access" menu and select "Keychain First Aid"
      7. Enter your username and password
      8. Click the "Repair" button
    The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
      1. Launch Keychain Access (located in Applications/Utilities)
      2. Click "Show Keychains" in the lower-left corner of the window.
      3. Select the problematic keychain from the left-hand pane.
      4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
      5. Check all options for deletion and press "OK"
      6. Create a new keychain by going to the "File" menu, then "New" and selecting
          "New Keychain"
      7. You can now make this keychain your default if you desire by selecting it, then
          going to the "File" menu and selecting "Make '(name of keychain)' Default"
    Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
    First, you want to enable the root user:
      1. OS X Mountain Lion: Enable and disable the root user
      2. OS X Lion: Enable and disable the root user
      3. Mac OS X 10.6: Enabling the root user
      4. Enabling and using the "root" user in Mac OS X
    After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
    Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
    Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
    Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
    Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
    The above comes from an article published on MacFixit.com.

  • Write SharePoint Custom Error logs into physical location

    Hi
       I need to programmatically write a custom error logs using SPDiagnosticsService class into my custom physcial location.
       But when i use SPDiagnosticsService it will write error logs into 15hive\logs folder instead i want to write into my physical location(say C:\Logs\Error.log)
       How to achieve this?
    Regards,
    Siva

    Hi,
    SPDiagnosticsService has a property 'loglocation' and it only points to one location. I reckon, you can not use one location for SharePoint log, another one for custom log - if you use SPDiagnosticsService. What I do for my SharePoint projects is, create
    a custom logger, which wrap the SPDiagnosticsService inside. Then My Logger class write the log into some custom location (configurable through web.config or by other means) as well as pass it to SPDiagnosticsService. Having a custom log file for custom solution
    helps to find problem very quickly and easily - which would be difficult if you would need to go through large log files. So I can suggest, write a custom logger, wrap SPDiagnosticsService  inside the cutom logger. Then on every Log Event, write in your
    cusotm file and if you want you can pass the event to SPDiagnosticsService  also.
    Thanks,
    Sohel Rana
    http://ranaictiu-technicalblog.blogspot.com

  • Problem logging into windows user account

    Hi, I have been using the fingerprint reader for logging into my user account but recently it has stopped working.I had setup a windows login password earlier and I remember it but when I try to login it never asks for the windows login password. I am only given two options to login, either using the fingerprint reader or a card. I have another user account  I am able to access but it does not have the administrator priviledges. Please can you assist me in logging in using my windows password. Thanks for any help you can provide.

    I got around to doing a basic test, and was able to successfully grab data from a camera through IMAQ and store it to the disk without needing to log in. The service launched at boot and stored plenty of data before I got the chance to log in.

  • Cant log into primary user

    I shut my computer (and IMAC with Intel chips running Tiger, OS 10.4.11) this morning and everything appeared normal.
    When I turned it on this evening and tried to log into my user (the main one) it starts (after I enter the password) as normal. The dock appears, then the legends/icons along the top appear, then after a few seconds the screen change blue and the user menu reappears. I can log into all of the other users, but not the primary user. I tried various things to resolve the problem, without luck. Does anyone have a suggestion?
    I've shut off the computer, unplugged it and plugged it back in, removed all of the external hard drives and ran disc utilities and made necessary repairs, but still no luck.
    I've gotten into the primary user's desktop and other folders thru the "back door" from another user, but would like to access the primary user from the user menu (the way it was before the problem).

    One followup to the problem. The same problem reoccurred late yesterday after I shut my computer off then turned it back on. Prior to shutting it off, the computer seemed to be acting a little unusual, but most noticeably while I was digitizing video in Final Cut Express. I was having trouble getting through the digitizing, that is, the digitizing would randomly stop. This usually means that the computer has too many open programs running, since the digitizing process tends tie up the computers processor. I still had problems digitizing even with most programs off. That's why decided to shut the computer off and reboot, however I immediately encountered the original problem again when the computer started up. This time I had to toss out "com.apple.systempreferences.plist" to get going but prior to that I did something else. After getting into the "home" users desktop through the "guest "user, I cleared out about half of the desktop (put files in folders or deleted files on the desktop). I had almost a 1000 files/folders on the desktop. I felt that this number of files on the desktop might be causing a slowdown and might be causing other problems. Anyway, since doing that, the computer seems to be running fine. I've shut down and restarted several times without a problem. Hopefully, it will continue to work.

  • Error Logging into Cisco Agent Desktop whilst using Cisco IP Communicator

    Hi there,
    I am having an issue whilst using Cisco Agent Desktop Version 7.0.  If I use a cisco IP Communicator ( softphone) i get following message, "Login failed due to a configuration error. Please ask you system administrator to associate your phone with the RM JTAPI Provider user ID according to the instructions in the admin guide".
    If user logs in to a normal Cisco phone then logs into agent there are no problems.
    Bit of a novice so your help would be appreciated.

    Hi
    In your AppAdmin pages on UCCX, in the Unified CM Configuration screen, there is an 'RM' user defined.
    This will be a user in CCMAdmin 'Application Users', which has all your CCX phones associated to it. UCCX uses this to CTI control the handsets... you need to associate the CIPC phone to that user.
    Regards
    Aaron
    Please rate helpful posts...

  • SSL error logging into Financial Reporting Studio

    We are using Financial Reporting 11.1.2.1, patch 120. We terminate SSL at a load-balancing appliance, therefore, none of the Hyperion services have SSL enabled.
    Users were able to log into Financial Reporting Studio (FRS) using https://servername:port successfully until we installed a new digital certificate in the virtual IP on the load-balancing appliance. Now when the users try to log into FRS, a SSL handshake error is written to the client log file. See below for full error.
    We have restarted all Hyperion services and verified that browser access to the EPM environment is working using https. We also tried uninstalling the FRS client and reinstalling, but get the same error.
    The original digital certificate was not imported on the Hyperion servers or client machines. The new digital certificate has not been imported either.
    Oracle Support said that we need to create a keystore file on each client machine and import the new digital certificate.
    Wondering if anyone else has run into this issue or can explain why we would need to import the new cert on each client, when we never had to import the original cert on the client?
    We also verified that if we revert back to the original cert on the load-balancer, the users can log into FRS.
    Thanks,
    Robin
    FRClientLogging.log:
    [2012-05-15T09:39:19.438-06:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JTH9owO5EgG6yzFg6G1FgbYb000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
         at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1611)
         at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
         at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1035)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:124)
         at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
         at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1112)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:623)
         at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:59)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:506)
         at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2114)
         at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1096)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
         at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
         at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
         at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
         at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
    Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
         at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:294)
         at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:200)
         at sun.security.validator.Validator.validate(Validator.java:218)
         at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
         at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
         at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1014

    fixed by creating local keystore on each client machine, importing the certificate into the keystore and adding the following registry entry on each client machine:
    -Djavax.net.ssl.trustStore=full path to keystore file.
    registry entry added to HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Reports\HReports\JVM
    still no answer from Oracle Support as to why it was necessary to do this for the new certificate when we did not have to do this for the original certificate.

  • Error Logging Into GreatPlains

    Trying to log into GP on a client computer and get the following error:
    "This login failed. Attempt to log in again or contact your system administrator"
    We can log into the sa account just fine, but any other user we try fails.  Also, we can log into this account on another client running GP just fine as well.  I tested the DSN connection and it tests fine.
    Thanks in advance.

    Hello,
    Could you examine the SQL Server error log and see if you can get a more detailed dscription of the error?
    http://msdn.microsoft.com/en-us/library/ms187109.aspx
    The error state will provide you the reason behind the login failed.
    http://blogs.msdn.com/b/sql_protocols/archive/2006/02/21/536201.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • I cannot access my idisk, I used the password I used to log into my user name but it is still not working. Please help!

    I tried several times since I bought my macbook pro to log into my idisk. My password for my user name does not work. I am clueless about what to do next.

    You need to turn the phone off and leave it in dry rice for 3-5 days. Then, plug it in and charge it for about 15 minutes and then try to turn it on. If it doesn't work at that point, it will be time to get a new phone.

  • Error logging into business rules

    Hi,
    I've installed EPM 11.1.2.1 in my PC and all the services seems to be up and running but when i'm trying to access business rules from eas console it's showing me the below error -
    Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules.
    Detail:Error while sending command to HBR Server running within the EAS server.
    Detail:com.hyperion.hbr.excp.DatabaseException.<init>(java.lang.String, [Ljava.lang.Object;, com.hyperion.hbr.excp.ExceptionSeverity, java.lang.Throwable)
    ** I'm using admin login**
    Any help in this will be highly appreciated.
    Thanks
    Agni                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi,
    I've seen in sum posts that it's advised to assign interactive user role to the user in this kinda issues. After doing that I'm getting a new error -
    Detail:Error creating DBRules. Cannot continue.
    Detail:Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    Please help...
    Thanks
    Agni

  • Keys not working, the important is seven. I need it to log into my user which has everything. HOW DO I FIX IT?!

    ost of cvxzy keys zess q as yo can see i eiccally failed at that sentence. to get the keys i coy and aste. bUt to log into y actal ser with netflix and sch i need the seven key to work. CAN ANYONE HELP???? its really annoying to coPy and Paste letters. even  more stressful to find the letters i need

    If you are in the habit of eating and drinking while using your computer, your keys may be dirty.  Use a can of compressed air or a brushed vacuum hose to clear out the dirt & crumbs from underneath the keys.
    If you spilled liquid on the keyboard...
    Immediately disconnect all peripherals, power cord & remove the battery.  Turn the computer over with the lid partly open and the hinge facing upward to let the liquid drain.  Do not flop it over and lay it flat - you want to separate it from the moisture.  Place paper or cloth towels under the machine to sop up the mess.
    After the computer disgorges whatever you spilled on it, don't turn it on for 72 hours or longer.  You want to computer to dry out completely before turning it on again.
    Some users here swear by hairdryers.  Blow drying the innards may bake whatever was in the liquid onto delicate computer components.  Better to let the computer air dry.
    Use plain tepid water to clean out the computer.  If you spilled iced beverage more than likely this ice fried the hot motherboard.
    Sugary, acidic or milky drinks will almost always cause problems later on as the residue starts slowly corroding the computer innards.
    Swab down any sticky parts with distilled water or denatured alcohol.
    If none of the above works, you will need to take the computer to a repair shop.  Apple Care does not cover liquid or food damage.
    How to remove and clean your Macbook Pro Keyboard
    Cleaning Macbook keys after a spill
    NOTE:  If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with.   They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).  
    If you have Homeowners insurance, place a claim with them.

  • Cannot Register Phone - Error Logging into the Windows Phone Dev Center

    I cannot register my phone using the Windows Phone Developer Registration tool running in Windows 8.1. The phone is a Samsung Ativ S.
    I've confirmed that I can log into dev.windowsphone.com on the machine. I've tried setting up the credentials with Credentials Manager (using dev.windowsphone.com as the url). I've confirmed that IpOverUsbSvc is running. I've confirmed that the phone is
    visible in the file manager (and even browsed files to make sure). I've unlocked the phone's lock screen. I've gone the Accounts page in the dev centre to confirm that my account is active.
    It seems the problem isn't with the credentials I use because, if I purposely enter incorrect credentials, I don't even get past the Microsoft Account Sign In window - the error message I am getting happens after that sign-in window right in the Windows
    Phone Developer Registration window.

    This thread is a little old, but not too old.  My Nokia Lumia 920 that used to be registered isn't connecting since the 8.1 update (latest update today).  I've tried wiping out my list of phones in my account on the dashboard, that didn't make
    a difference.  IpOverUsbSvc is running, has been re-started alone, and has been re-started through a power-cycle.  I can browse files on my phone from my Windows 8.1 laptop.  When I disconnect / reconnect my the USB cable to my phone, the Device
    Phone Registration screen shows an automatic retry.  So far in all cases, I'm getting:
    Some additional information based on more searches and some thinking:
    Windows Media Player is installed and can access the Lumia
    I can't see any event log messages associated with the failure to connect
    Although it seems associated with Windows Phone 8.1, I can't say for sure that's true, since I hadn't tried connecting while it was running Windows Phone 8.0 in awhile.

  • IMac shuts down when i try to log into some user accounts

    Installed Lion on my mid 2010 iMac.
    Now when I log into one of my accounts it starts to log in, then decides it doesn't want to and restarts the machine.
    Guest account works fine, and when I made another account that works fine as well.  Just keeps shutting down when I try to log into my main account.

    Thanks for that.  It looks like it is mail causing the problem.  Took mail out of launch at start up and seems to be working ok now.
    All I have to do now is make sure I remember to turn off mail before I shut down my computer.

Maybe you are looking for