Error MDDataSetBW.GetCellData on Qaaws if BEx Query contains a structure

Hi everybody!
I'm getting an error every time I executy a query on a universe based on a BEx query which contains a structure. This query works good if it carries data, but when no data is returned I get the following error:
Error in MDDataSetBW.GetCellData.
By the way testing the MDX in MDXTEST it display no errors, only the empty dataset.
After doing a few tests I can assume this issue is related to the use of a structure in the query.
Have you got any solutions/suggestions please?
Thanks

Ciao Roberto,
thank you very much. Actually I wasn't using the "xml document" mode in MDXTEST, and switching to that analysis I've got this message: "Object MEASURE 0 not found". But the MDX is like this:
SELECT { [D9S9GS5IZK94F9FA2E29EF6DU].[D9S9GS5IZK9W3VR1DXHVGUKNM] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( { [0CALYEAR].[2010], [0CALYEAR].[2011] } , [D9S8VDQFWXBZTTTIT5KETFV2Q].MEMBERS ), [0VTYPE].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL00].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION, [0VTYPE].[20VTYPE] ON ROWS FROM [ZCEMPBC/ZCEM_GENERAL_YTD] SAP VARIABLES [!V000001] INCLUDING [ZBUSINESS].[GCEM] [!V000002] INCLUDING [0COUNTRY].[DK] [ZCUR_SEL] INCLUDING 1
So, I don't understand that message. What "MEASURE 0" stands for?
Thanks.

Similar Messages

"Error #2032" while trying to import BEx query through SAP Netweaver BW connection in Dasboard

Hi Team,
BO server version: 4.1 SP3 Edge edition
Dasboard Version: 4.1 SP3
BI Version: NW 7.4 SP7 (ABAP only)
We are getting Error #2032 while trying to import BEx query through SAP
Netweaver BW connection in dasboard Xcelsius.
Please suggest to sovle this error.
Regards,
Vinay Shrimali

There are several notes about this error - please see http://service.sap.com/sap/support/notes/1856691
http://service.sap.com/sap/support/notes/1801130

Report on BEx query with 2 structures (one in rows and one in columns)

Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
Ok, I found samr problem in another thread. Sorry.
Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

Webi throwing error MDDataSetBW.GetCellData

Hi,
I am creating a webi based on Bex Query.
In Bex Query, I have 6 characteristics , 4 Key figures , all 6 char in Default values block too and 1 charcteristic (Plant) in Characterisic restriction block which is authorizing variable.
1) When i am creating a webi using above dimensions....i am able to run the report with plant as a optional prompt in the report when i supply any values to which the user is authorized. But when i do not supply any value it throws the error instead the report should show the data for all Plants.
A database error occured.The database error text is: Error in MDDataSetBW.GetCellData.
2) When i put all the available values in the promt for Plant, then also i receive an error
A database error occured.The database error text is: Error in MDDataSetBW.GetCellData. FUNCTION_NOT_FOUND. WIS(10901)
The below versions and patch level is being used:
SAP BusinessObjects Edge BI Standard Package XI 3.1
SAP NetWeaver BI 7.0 , BW Support Package 19
Please Help!!!
Regards,
Akhil

Hi All,
I also found the same error message, but there is no problem with the authorization.
I run the query in MDXTEST and it's work fine. In BexQuery also can show the data.
But when I try to run the query from QAAWS or Web Intelligence,
it's show the same error message:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. FUNCTION_NOT_FOUND. (WIS 10901)
My SAP BO version XI 3.1 and SAP Netweaver BI 7.0.
Need help,
Thanks and regards,
Henki Chen

Getting WEBi Error ": MDdatasetBW.Getcelldata"

Hi Gurus,
When I am running a WEBi report which is built on top of SAP BW query, I am getting error "
Database erro : the error is MDdatasetBW.Getcelldata. Unknown error (WIS 10901).
This is an ADHOC query in SAP BW that drills down to the very detail level.
Any advise is really appreciated.
Thanks,
Aruna..

Hi Ingo, here is the info..
BO XI 3.1
Windows server Enterprise 2003 SP2
SAP BI SAP Netweaver BI 7.0, Release 700 Level 18 SAPKW70018
Yes. I agree that there is not concept of free chars in BO.
In real scenario how I do run a query in BO with all these chars. In BW becuase of the free chrs concept , we can drag the free chars dynamically at run time. How do I get this kind of report run in BO. If I add all chars , It is timing out.
Please advise.
Aruna..

Error MDDataSetBW.GetCellData (WIS 10901)

Hi all,
Iu2019m working with Business Objects series XI 3.1 and SAP BI. It give me the following error when I try to refresh a query in WebI after add on an additional characteristics. If remove that any characteristic, it works fine.
"...MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details. (WIS 10901)"
Please help me on this.
Regards,
Hizam

Hi Davis and Hizam,
Think is not million of records if cells if you have 10 dimensions and 100.000 records you will have this problem, because is million of cells.
How many dimension do you have in the query panel?
Other issue that I had with similar error number was related to LOV, and I solved this procedure:
1. check your Web Intelligence Processing Servers are enabled and running?
2. Does the user have the appropriate rights to the universe and connection underlying the report?
3. Do an integrity check on the Universe and resolve all cardinality issues from the migration.
Once all the integrity issues were resolved and the LOV's recreated u2013try to re-export the Universe, which will resolve the WIS errors.
4. check you have the Universes existing in the correct universe folders.
5. And also check the disk space.
Best regards,

ERROR : MDDataSetBW.GetCellData

Hi
I have this error when i lunch a query on BO, why?
The query based on anagen linked to a Multiprovider on BW.
Please colud you help me?
Thank you very much.
Massimo.

>
Ingo Hilgefort wrote:
> Hi,
> sorry - you started off with an error on GetCellData and now you coming back with prompting... what exactly is the issue you are facing ?
>
> Could you try to provide the answers to the previous questions ?
>
> thanks
> ingo
Now, I include in the WebI query with the prompt (mandatory) of the object authorization of the SAP/BI.
This procedure is correct? That's right?
Thanks
Sandy

Error: No data available while executing BEx query

Hi BI expert,
Please help me out as I am very new in BI. I am getting error "No data available" after executing query in BEx query designer.
thanks

Hi,
Pl check for the Filter Conditions of the query.Have the same filters data as that in the Cube/ODS.
Hw is the Data Flow ???
A)From ODS to Cube to Query ????
or
B)From ODS
or
C)From Cube
1)Check on which Infoprovider the Query is built.
2)If it is Cube then Check the data in the Cube.Right click Cube ,Display data and Execute.
3)If data is avaliable in cube then it shud come in Query except for the Filter conditions .
4)then check for the Filter conditions of the query.
5)If data is not avaliable in Cube then check in ODS ????
6))If data is not avaliable in ODS then check in PSA
7))If data is not avaliable in PFA then check in R/3.
Also search in SDN as to how the Data flows
A) both from Flat File and
B)R/3 and FULL and DElta Load.
That will give clear uinderstanding !!!!!
Rgds
SVU123
Edited by: svu123 on Dec 15, 2008 2:15 PM

BI7 : BRAIN 667 error when modifying a KF in BEX query

Hello,
When we modify a KF (standard or calculated) property in a Bex query, we have a Brain 667 error (Query handle xxxx is invalid . Message no. BRAIN667).
When it's run from the WAD, the error message is BRAIN 282.
Does any body know what's this about ?
Thanks;
MGH

We are already in SP9 and applied many notes related to SP10.
The fact is that we have a BW 3.5 (vers. 3500.11.051) Bex and not a BI7 Bex.
We have a BI7 with BW 3.x functionalities.
MGH

Portal runtime error while executing BI report through BEx Query designer

I want to execute a query from query designer but when I execute it the following error occurs -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:30_30/04/11_0008_35740651
Refer to the log file for details about this exception.
I have checked log, the error displayig in log is,
ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
Kindly help me.
regards
nk

Dear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards

Uni on Bex-Query: filter on Structure - Without Keyfigures as column: error

Hi All,
I have a 'Without Key Figure structure' as a column called Version in which (amoung others) the values 'Actual' and 'Last Year' .
Thus
Version
- Actual
- Last Year
Now i want to create a filter in my universe which pre-selects Actual.
When I use the tool for that this is my standard definition of the filter:
<FILTER KEY="@Select(Version\Version)">
<CONDITION OPERATORCONDITION="Equal">
<CONSTANT VALUE="Actual"/>
</CONDITION>
</FILTER>
However it results in error: 'A database error occured. The database error text is: (CS) "Error on BindCol". (WIS 10901)'
Meaning(i guess) that somehow i'm not getting the correct selection-command to the database,
When i use the version-dimension itself in the reports as part of the query filter it works fine and LOV displays both versions for selection.
We are using XI3.1 fp3.1; BW 701-sp5 on oracle 11
I've look through the forum, but couldnt find an answer.
If there is point me into that direction and i'll close this one
Any other information on how filters etc should be specified in an Universe on a BW query is also greatly appreciated.
I already have found some info but any information is welcome.
Your help is greatly appreciated.

I found my answer.
Create a caption dimension for your keyfigures and filter on thath
Dimension:
[xxkeycharacteristicxx].[caption]
Filter:
<FILTER KEY="@Select(Key Figures\Key Figures Caption For predefined filters)"><CONDITION OPERATORCONDITION="Equal"><CONSTANT CAPTION="VERSIONS like Actual"></CONSTANT></CONDITION></FILTER>

Error in MDDataSetBW.GetCellData for WebI report on SAP BW

Hello All,
I am getting below error when running a WebI report (BOBJ XI SP3) on top of a universe built on a SAP BW BEx Query (SAP BW 7.01 Level 0007).
"A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Please enter a valid value for characteristic ZPRODCODE.. (WIS 10901)"
I observed that
1. Error is coming only with more number of restrictions in selection criteria.Without those selections ( as they are optional prompts ) data is coming properly with all 950 records. So as mentioned in old threads huge data is not an issue here
2. Error is coming only when data is not available in cube for the given selection criteria after taking long time.
Any idea why error is coming instead of report throwing No Data to retreive.
Vamsi Ch

Hi,
There are couple of threads around this issue. Go through the below links and hope you might get the proper info.
error MDDataSetBW.GetCellData
Error in MDDataSetBW.GetCellData (WIS 10901)
Webi throwing error MDDataSetBW.GetCellData
Re: Error in MDDataSetBW.GetCellData
-Noor.

MDDataSetBW.GetCellData Error

Hello Experts,
I have Universe on Bex Query and when I try to create webI report, I am just selecting 2 dimensions and 1key figure, it's throwing error MDDataSetBW.GetCellData Error.
We are on Business Objects 3.1 Service Pack1. Please advise what can be wrong.

Hi,
The error is certainly with the BEx query. Check the key figure & the characteristics in the query.
Execute the Bex query 1st in RSRT & ensure it's running fine. Also chk whether u have used any variable (customer exits, etc...) & chk for their correctness.
Regards
Arnab

Webi error as a Bex query data source

Hi All,
I am getting the below error When i try to access Bex query from Webi with OLAP connection as SSO, if it is predefined it works good, for predefined i used Service account for now.
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: [[error.openSapBwBrowsingSessionFailed] 0] <<?xml version="1.0" encoding="UTF-8" standalone="yes"?><ConnectionString>
   <Properties>
      <Initial Catalog />
      <Language>en_US</Language>
      <Data Source>xyz</Data Source>
      <Cube Type>Unknown</Cube Type>
      <SaveLanguage>true</SaveLanguage>
      <Initial Cube />
      <TargetProvider>SAPNETWEAVER7X</TargetProvider>
      <NetworkLayer>SAPBW_BICS</NetworkLayer>
      <Authentication Mode>2</Authentication Mode>
   </Properties>
   <ExtendedProperties>
      <JCO_ASHOST>xyz</JCO_ASHOST>
      <SapLoginMode>0</SapLoginMode>
      <JCO_R3NAME>bd1</JCO_R3NAME>
      <JCO_CLIENT>300</JCO_CLIENT>
      <JCO_SYSNR>30</JCO_SYSNR>
      <JCO_LANG>EN</JCO_LANG>
   </ExtendedProperties>
</ConnectionString>>
I did configured STS and SAP Authentication tab on CMC.
Please advise
Thank you!!!
kris

Hi Satish,
we did generated keystore and certificate , as said predefined connection works, but SSO option running into error.
we successfully configured AD SSO Kerberos , once we configure SNC, will do testing again and let you know. STS configuration steps also done.
Thanks,
Kris

Webi - MDDataSetBW.GetCellData

Dear master,
I created an Universe based on BEx query.
In Webi, I select 3 objects [one structure, 0CALMONTH, one measure] and view the report with parameter range of 0CALMONTH.
I inserted the variable value as following:
start range: 11.2010
End range: 11.2010
When I attempted to preview the query, an error appeared as following:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details. (WIS 10901)
When i changed the start range to 06.2010, the error has rip-off immediately....
Based on the scenario above, the error message only prompt when there was no data exists in BW system. Example 11.2010 has no data in BW system.
How to resolve this? Thanks in advance.
Regards,
KS

Hi Ingo,
Sorry, I should change the topic title to Xcelsius.
I created a new query via "Query As A Web Service" client tool. Then I copied the URL.
Inside xcelsius's data manager, there are a few options from the list for adding a new connection. Then I select "Query As A Web Service" and paste the URL and do the other necessary. When I preview the report, I get the error MDDataSetBW.GetCellData.
After that I changed the data connection to "Web Service Connection" and paste the URL and do the other necessary. The error of MDDataSetBW.GetCellData has never shown up again.
I'm not sure why QAAWS data connection on Xcelsius doesn't work.

Error MDDataSetBW.GetCellData on Qaaws if BEx Query contains a structure

Similar Messages

Maybe you are looking for