Error Message 4261 when burning cd's

I have tried several different things to try to get this corrected. itunes will start burning a cd - get through 3 or 4 songs and then cancel the burn. The following is the diagnostics message:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 6.0.5.20
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X300 SE 128MB HyperMemory\RADEON X300 SE 128MB HyperMemory
IDE\DiskARRAY1.0.00_U, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskTEAC___USB___HS-CFCard4.00, Bus Type USB
USBSTOR\DiskTEAC___USB___HS-MSCard4.00, Bus Type USB
USBSTOR\DiskTEAC___USB___HS-SDCard4.00, Bus Type USB
USBSTOR\DiskTEAC___USB___HS-xD/SM_4.00, Bus Type USB
IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________D108___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8164B_______________0D08___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HL-DT-ST DVD-ROM GDR8164B, Rev 0D08
Drive is empty.
F: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 11 songs on CD, playing time 38:59 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:41:24
Track 3, start time 07:17:05
Track 4, start time 10:02:25
Track 5, start time 14:14:55
Track 6, start time 17:04:69
Track 7, start time 20:40:58
Track 8, start time 23:53:71
Track 9, start time 28:12:29
Track 10, start time 32:08:32
Track 11, start time 35:01:49
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16 24 40.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive F: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
I have updated all the drivers and chipsets, as far as I know. Please help!!!
Dell Dimension DM051 E510   Windows XP  

I have tried several different things to try to get this corrected. itunes will start burning a cd - get through 3 or 4 songs and then cancel the burn. The following is the diagnostics message:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 6.0.5.20
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X300 SE 128MB HyperMemory\RADEON X300 SE 128MB HyperMemory
IDE\DiskARRAY1.0.00_U, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskTEAC___USB___HS-CFCard4.00, Bus Type USB
USBSTOR\DiskTEAC___USB___HS-MSCard4.00, Bus Type USB
USBSTOR\DiskTEAC___USB___HS-SDCard4.00, Bus Type USB
USBSTOR\DiskTEAC___USB___HS-xD/SM_4.00, Bus Type USB
IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________D108___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8164B_______________0D08___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HL-DT-ST DVD-ROM GDR8164B, Rev 0D08
Drive is empty.
F: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 11 songs on CD, playing time 38:59 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:41:24
Track 3, start time 07:17:05
Track 4, start time 10:02:25
Track 5, start time 14:14:55
Track 6, start time 17:04:69
Track 7, start time 20:40:58
Track 8, start time 23:53:71
Track 9, start time 28:12:29
Track 10, start time 32:08:32
Track 11, start time 35:01:49
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16 24 40.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive F: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
I have updated all the drivers and chipsets, as far as I know. Please help!!!
Dell Dimension DM051 E510   Windows XP  

Similar Messages

  • Error message 4261 when trying to burn discs

    Arghh, this is driving me mad. Since I updated to Itunes 11, I have been unable to burn playlists to disc. I'm a teacher and need to do this a lot for my work. I've wasted about 20 blank CDs as they start burning, then after a few tracks I get the message "Cancelling disc burn" and the disc is ejected with the error message 4261. I've tried changing the burn speed, I've unchecked the box about including CD text. Why is it doing this and more importantly, how can I stop it?
    Can anyone help?

    Please can anyone help me with this?

  • Error message 4200 when burning CD's......Can anyone help???

    I just tried to burn a playlist through iTunes and got the error message 4200. This has been happening for a while and i am very frustrated that i am wasting CD-R's because iTunes won't complete the burning process. Does anyone know anything about this?
    I ran a diagnostic test and got this:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Hewlett-Packard Pavilion ze4800 (PF175UA)
    iTunes 7.6.2.9
    QuickTime 7.4.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number B66B26ED6280AD9F
    Current user is an administrator.
    The current local date and time is 2008-07-03 21:48:22.
    iTunes is not running in safe mode.
    Video Display Information
    RADEON IGP 320M
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** CD/DVD Drive Tests **
    LowerFilters: cdrbsdrv (7.5.0.0), Afc (1.0.0.2),
    UpperFilters: GEARAspiWDM (2.0.7.3),
    D: SONY CD-RW CRX830E, Rev JPK4
    Drive is empty.
    Can anyone can interpret this? I am not that computer savvy and have no clue what the above means. Please let me know if you have any advice for this problem!!! Or any ideas on where i can go to get this problem resolved?
    -mj

    My suggestion, is to post the exact error message that you see.

  • HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)?  It has been working fine, until today...what does this mean??

    When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280).  It has been working fine for months...any solutions?

    I have the exact same problem.
    Been searching through this site to try and find an answer but still not come up with anything.
    The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
    The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
    http://www.emergingearth.com/itunes-7-cant-burn-cds/
    Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
      Windows XP  

  • Keep getting error message 4310 when trying to burn music onto CD? How can I fix this for free?

    Keep getting error message 4310 when trying to burn music from playlist onto CD. How can I fix this for free?

    You can use the email form here >  Apple - Support - iTunes Store - Contact Us
    iTunes Store & Mac App Store: About your Apple ID and password

  • Error message 29 when Sharing to DVD

    When trying to create a disk image of my movie project, I get this error message: The operation couldn’t be completed. (DSPPublishing error -29.)  What's the source of the problem, and what's the solution?

    DSPPublishing error -29 (Final Cut Pro X)
    This error can occur when burning a disc if your menu has incompatible assets.
    Suggested Actions
    If your menu has a background image, make sure the image is not too large. Try reducing the size of the image and saving it as a JPEG or PNG.
    Since you have no background image try trashing your render files for the project and then try to export to disk image again. If that doesn't help I would suspect a corrupt project file. Copy all your clips and paste into a new project. It could be just a corrupt clip so you might try exporting just different pieces of the timeline and see if that will work.

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

    After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
    I have had this problem before and had to reinstall an earlier version of firefox.
    The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
    Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

    I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

  • I am getting an error message -41 when I try to send my project to IDVD

    I am getting and error message - 41 when i try to send my video project to IDVD. Does anyone know what i have to fix?

    Hi
    The Error -41   mFulErr  Memory full (open) or file won't fit (load) - means that memory is full
    Memory can be more than one thing
    • RAM - usually is enough and rarely give this error
    • Start-Up Hard disk - is TO FULL - very common origin to this signal
    • Other hard disks - Usually do not have any thing to do to this
    So first idea is - HOW Much free space is there on Your Start-Up (Mac OS) hard disk
    My minimum is 25Gb free space and especially if iDVD is to be used.
    This space is needed by iDVD and Mac OS temp. files and can not be addressed elswhere. Has to be here.
    Secondly - I never in any version of iMovie use - Share to iDVD - BUT I - Share to Media Browser and as Large (not HD) this I import in iDVD and result are so much better.
    Yours Bengt W

  • ITunes displays error message -69 when syncing iPhone

    hi,
    iTunes displays error message -69 when i sync my iPhone 3GS, this is just for syncing music to my iPhone. apps syncing is ok.
    can anyone help please?
    thanks

    Follow the directions in this support article:
    http://support.apple.com/kb/HT1210

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Error message 9006 when trying to update os

    getting error message 9006 when attemption to update os on ipad 2

    To the original poster and Jennifer:
    Although this step is not in the Apple document, I am pretty sure I found an easier way to fix 1601, 1602 and 1604 errors at my iPhone blog -- and that is to simply switch USB ports and try again -- also make sure you are not plugging in the iPhone via a hub and that it has full USB power.
    I have no idea why the change of ports seems to work, but 49 out of 50 people who have tried it report success, so you've got nothing to lose.
    Scott

  • Error message appears when trying to start server in VM Manager

    Error message appears when trying to start server in VM Manager
    OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
    When trying to restart server:
    OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

Maybe you are looking for

  • Photo Album for iPad

    After I import the photos from two or more camaras from SD camara kit to iPad/iPad Mini, can I sort the photos in album order by creation time, so that I can upload to facebook or etc by this order. Thank you all

  • IWeb saving in iDisk

    I've been trying to add specific links on my website by changing the HTML text in the iDisk HTML file copy. I then "Save" after changes. When I double click on the newly saved file, it opens in a web browser (Safari) as I want it to look. However, th

  • How to load xsl-files out of jar-files

    Hi, I have included some xsl-files into a jar-file. I can access this files with the following code-snipped if the jar-file is local on my harddisk: ClassLoader.getSystemClassLoader().getResource("pcodeliste.xsl").openStream() But the problem is that

  • 7130g Hang on startup

    Hi there. I've had this 7130 for the best part of two years now without any trouble. However, recently, when I switch it on, it will not progress beyong the startup screen for me. The O2 (for they are my provider) welcome screen appears with the egg

  • Query Performance Tunning

    Dear Experts, I am executing a query which is build on a Multiprovider. The execution time is approx. 12 mins, again if I enable a dimension to analyze it takes another 15 mins. The technical details of the query are: 1) The multiprovider fetches dat