Error message: Compaction error
My mail program is not sending or receiving. Error message: "Compaction Error There was a failure while writing to the disc. The disc may be full. The mailbox will be returned to its state before compaction."
What is your hard drive capacity and available free space?
Similar Messages
-
cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I get error message "unknown error" When trying to log on to itunes via pc, help please!
I get error message "unknown error" When trying to log on to itunes via pc, help please!
Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html
Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium -
After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide -
Error message says error writing Mail preferences
There’s a discussion about the very same problem I’m having at <http://discussions.apple.com/thread.jspa?messageID=2047886�> about Mail not being able to save preferences... or at least a message pops up each time despite the fact that the preferences are saved. Annoying, really. I’ve followed all the steps suggested in the above thread, including terminal commands and repairing of permissions. However, the problem didn’t go away. Unfortunately, the thread above was closed (without being answered), so I had to open a new post. Here’s a description of the problem as stated in the above thread... and the problem occurs exactly like that on my Powerbook running 10.4.7.
**** Original question follows ***
At some point in time, I suddenly began having the problem of every time I close my Mail preferences window, I get an error message stating, "Error Saving Preferences - Writing your preferences to disk has failed. Your preferences may not have been saved. The permissions on ~/Library/Preferences may be wrong or your disk may be full."
My hard disk has many GB free, and I still keep getting the error message after repairing permissions.
I ran a test of changing a couple of prefs, then quitting Mail and relaunching, and my changes stuck.
But some prefs such as changes to signatures won't stick (although they never did, so the latter may be unrelated to my current problem).
In any event, it's disconcerting that I keep getting the error message.
Anyone know what's up? Is there a fix?The preference file may be corrupt.
Try the following:
Quit the Mail.app first and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Preferences > com.apple.mail.plist. Move the com.apple.mail.plist file to the Desktop.
Note: Moving the com.apple.mail.plist file out of the Preferences folder will require re-entering all email account information when re-launching Mail.
The only exception to this is if you have a .Mac account and/or you created an email account as part of the original computer setup assistant used when first turning on the computer after it was purchased which will be re-created automatically.
Launch Mail and decline the prompt to import mailboxes. After re-entering all email account information, the Mail.app should rediscover the existing account named folders and mailbox files at Home > Library > Mail.
After confirming all mailboxes were successfully rediscovered, you can delete the copy of the Mail folder and old com.apple.mail.plist file from the Desktop.
Test if this resolves the problem.
My hard disk has many GB free, and I still keep getting the error
message after repairing permissions.
What is your hard drive capacity and available free space? -
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
I have recently upgraded to an iphone 5S 4G and also updated my mac with the latest software so that i can use the icloud to back up all my stuff. It doesn't seem to be working with my contacts at all and recently added ones are disappearing, old ones are duplicating etc. The contacts icloud has the following error message CoreDAVHTTPStatusErrorDomain error 501. and I have no idea what it means. Can anyone help?
I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.
When updating my iPod Nano, I get the error message: Unknown Error 9006. Any help is appreciated.
See this
http://support.apple.com/kb/TS3694#9006 -
Can't download iTunes on my laptop receive following error message- an error occurred during the installation of assembly Microsoft vc80.CRT.type="win32", version 8.0.50727. 6195 public key token= ifc8b3b9a1e18e3b process architecture=x86hresult:0073
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
PSE 8 - How do I fix the error message: An error has occurred reading files or writing to disk...?
Hello
I am using Photoshop Elements 8 on Windows 7 (64 bit). I have all my photos stored on an external hard drive connected by usb. The photos were transferred onto the HDD from a Windows XP machine. I bought a new computer so I installed Photoshop 8 and imported all my photos to the organiser from the HDD. I have also taken some photos yesterday which I have uploaded to the HDD.
Now, when I want to delete a photo I check the box to say I want it to be deleted on the hard disk and I get the error message: 'An error has occured while reading files or writing files to disc. The disc may be full or there may bea problem with the source media.' This does not happen with the photos I uploaded yesterday, only the ones which were put onto the HDD from the XP machine.
Please could someone help? I have tried the File>Catalog> repair and optimise functions. I have reinstalled the software. It still does the same.
Thank you in advance
DaveDavid GW wrote:
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing. -
I cant download in app store error message cocoa error?
i cant download in app store error message cocoa error?
Apple’s having trouble with the iTunes Store servers right now. Keep checking http://www.apple.com/support/systemstatus/ and wait for them to resolve the issue.
(123941)
Maybe you are looking for
-
File Content Conversion Problem: Sender File Adapter
Hi All, In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file. #SMESS=IV01:672633SAP:676968:::NL51:02:11+ COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dt
-
Good Morning, I want to change the levels of audio within a single clip. I used to know how to set the points in the audio line, but for the life of me I can't remember how to do it. Thanks for your help. Andy
-
How can I make non-inspectable component properties persist from design to runtime?
Hey, I have two components (lets call them A and B) which have normal inspectable properties (e.g. NAME and AGE) which allow you to enter values via the component inspector. When I type the value for NAME in component B (via the component inspector)
-
hai, i am having nearly 10,000 records to display to client ( 10 records to each page.) in JSP. here, i stored all the records in a vector (vector is assigned in the session) for the first time. after the first time request, i will contact only the v
-
Hi, I have being looking for the possibility of executing Web Dynpro ABAP Application on Portal 2004 (6). While going through SDN I found a SAP Note 903662 and few Blogs, stating it is possible to Use Portal 2004 and execute WDA application. My requi