Error Message "Delete price or set "Invoice Expected Indicator" in PO.

Hi Gurus,
We are in extended classic scenario with version 5.0.
We are getting error message "Delete price or set "Invoice Expected Indicator" when we are releasing the PO from Release PO option.
We are getting this error message in below situation:
We created shopping carts without vendor then after approval PO gets created in "Held status". When we edit the PO & add vendor then system gives error message "Delete price or set "Invoice Expected Indicator" (Line 1).
In this case the invoice expected indicator is not sets when we add vendor in the PO but if we create Shopping cart with vendor & when PO create din that case the invoice expected indicator is automatialy comes.
Can any one please help me to resolve this issue.
Thanks & Regards,
Manish
Edited by: Manish Mamidwar on Jul 30, 2010 5:40 PM

Hi All,
I have the same problem, Delete price or set "Invoice Expected Indicator" in PO
I have an Item Position of the PO that is Limit of Liability and for this position type I will not make invoice, then I would like remove the flag of invoice execution, but a recived your same message, can you tell me how did you resolve this problem?
Kind regards
Valentina Mari
Edited by: Fuffo Fuffi on Nov 10, 2010 12:51 PM

Similar Messages

Error during PO Change-"Enter the price or set the 'Invoice Expected' indic

Hi Gurus,
I am facing this issue in the PO change. Whenever I try to change a PO and check ; system says" No error" but when I order it then I get this error "Enter the price or set the 'Invoice Expected' indicator " with a pop up "Complete Purchase order xxxx first or 'hold' the changes
This happens for all the POs with any vendor.
Regards
Kapil

Hi Kapil,
We have got similar issue before while changing the P.O in change mode.
This generally happens when the P.O is changed after the follow on documents has been created.
In this case you can delete the change version and then amend the P.O without any issue.
Generally the 'Delete' button gets disabled once the follow on documents get created but in this case the 'Delete' button would be active and clicking on 'Delete' button would delete only Chnage version and the P.O would be back to original ordered status.
Please do the changes and let me know in case of any further clarifications.
Regards,
Teja

Please clear the price/ set the invoice expected indicator

Hi SRM Gurus,
We have upgraded from SRM 3.0 to SRM 7.0 thro' Double step upgrade.
We are in SRM 7.0 SP06
Scenario :Extended Classic Scenario
After the Upgrade we have created a shopping cart from SRM-MDM catalog.
Shopping cart is approved.Local Purchase order is not ordered but it is
saved. When we Edit the Purchase order and press the Check button
defect noticed" Plese clear the price (or) set the invoice expected
indicator.
This happens only after the Upgrade.
even for the old purchase order when we do changes we are getting the above defect
can you please advice us.
whether any SAP notes to be applied. I have checked in SAP market place,there is no SAP NOTES
Regards
G.Ganesh Kumar

Hi,
I have checked the Purchase order for the newly created one in SRM 7.0
If we go to the supplier list we can check for the invoice expected indicatoe where we can check this.
It is working, I resolved on my own.
For all the OLD purchase order created before upgrade if i change and check even though the invocie indicator is checked
i get the above message."Please clear the price/ set the invoice expected indicator"
any one working on SRM 7.0 can please check and reply
Regards
G.Ganesh Kumar

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

Persistent Layer Error Message: ORA-01729 database link name expected

Hi,
I've done a series of loads from DB2 into Oracle, initially importing the database objects from DB2 and Oracle, then creating the mappings, deploying and executing. It all worked and I had no problems. For some reason now whenever I tried to import a new Database Object (table) from the DB2 I enter the password, test it and it successfully connects but then I get the error message on a popup box:
SQL Exception
Persistent Layer Error: SQL Exception
Class Name: CacheMediator
Method Name: getSQLResult
Persistent Layer Error Message: ORA-01729 database link name expected
If I create a new location for the same database it works and I can import new objects. The only difference I can think from the initial imports is that I’ve moved the repository from one server to another. Might be the case where some information got corrupted in the metadata.
Has anyone seen this kind of problem before? Can you please help me out with this issue?
Thanks in advance for your help.
Regards,
Leo

I found it.When I look at the db links there is something missing.When I correct it everything works fine.

C+ 131 (Error message) material price will be negative

Hi
While transfering normal stock to project stock, system responding with error message as "material price will be determined negative value".
Material ledger is already activated - Material price indicator is "V" - e.g., if the material price is below 10$ while doing the MB1C: Stock transfer, system responding as said above. If i increase the material price using MR22, system is not giving any error message and allowing me to post. Here, material is spare part (procured from outside).
Is there any config settings which caused the error message ?
Please share your thoughts if anybody has faced this type of error earlier before.
Thanks in advance for your reply.
VVR

Dear Team,
While cancellation of GRN document system is showing the message like C+ 131 (Error message) material price will be negative.
As per the analysis the concern Po was belongs to 2008 the material price was 85 MAP.Gooda receipt completed on 22.04.2010.The qty of the gr document is 51.
Now we are unable to cancel the GRN document systemis showing the error message like the above mentioned.
Note: My MAP price 11 rs.I need to know howthe system is reduced this level.where i can see that.Kindly advice to proceed further.
Regards,
Suma Nalluri

Error:C+ 131 (Error message) material price will be negative

Dear Team,
While cancellation of GRN document system is showing the message like C+ 131 (Error message) material price will be negative.
As per the analysis the concern Po was belongs to 2008 the material price was 85 MAP.Gooda receipt completed on 22.04.2010.The qty of the gr document is 51.
Now we are unable to cancel the GRN document systemis showing the error message like the above mentioned.
Note: My MAP price 11 rs.I need to know howthe system is reduced this level.where i can see that.Kindly advice to proceed further.
Priority is high for us.Your replay is most valuable for us.Thanks for the consideration
Regards,
Suma Nalluri
Edited by: SUMA NALLURI on Apr 24, 2010 2:09 PM

Hi,
could you explain how solve this problem?
Thanks
Beste

Error message: deleting discount groups in WT that have been removed

Hello,
In the synch manager I'm getting this error:
Deleting discount groups in WT that have been removed from B1 without notification
The only thing I can imagine is that an Itemgroup in B1 was removed, but as far as I can remember there hasn't been removed an Itemgroup.
The only thing which has been done in WT is that I removed a Catalog.
Obviously I have to find out if there is an Itemgroup in WT which isn't in SBO anymore. Has anyone an idea how to find out. Probably with a query? How do I remove the Discount groups from WT?
The problem right now is that the synch manager gives a time out error. The error of the Deleting discount groups slows down the synch by two hours which is very inconvenient in our situation (synch is normally every 10 minutes)
Best regards,
Tim

SAP gave the following solution:
Running that query indicated below in the attachment (re:Resync Special Prices posting) is a safe operation to perform. It essentially mimics someone editing every special price in SBO which forces them to synch.
This query (and others) can be seen in a SBO stored procedure called PRX_Queue_All_Objects. Running this query and re-synching should fix the
synch error related to there being less special pricing records in WebTools than B1.
The other error related to discount groups is slightly more complicated.
This is caused because the synch found that there were more discount groups in WebTools than B1 has so it is trying to delete the extra ones.
Older versions had a problem with this step when there were many groups to delete. It was fixed in newer versions where the groups were deleted in smaller sets.
To fix the second issue there are 2 options. First lets confirm the different in record counts.
Run this query in B1:
SELECT COUNT(*) FROM OSPG WHERE ObjType IN (52,43)
And run this in WebTools
SELECT COUNT(*) FROM PartsPricing WHERE Filter IN ('ItemGroupDiscount'
,'ManufacturerDiscount')
Based on the error message, we assume there are more records in the webtools query than the B1 query.
If they are different, there are 2 options#
1) Delete all pricing records from WebTools, re-queue everything in SBO and re-run the synch. To do this the site should be taken offline so customers aren't browsing the site while there is no pricing information. First backup the WebTools database. Next delete everything from the partspricing table and then the partspricingmaster. Finally re-queue everything by 3 first queries in the PRX_Queue_All_Objects stored procedure. This will re-queue Discount Groups, Special Prices and
PriceLists. If you do not have these queries as your top 3 then you have
an older version which can be resolved by clicking the install plugin button on the synch manager. By doing this, it isn't necessary to run the query above to fix the special pricing error, it will all be handled
in this step.
OR
2) Run a SQL Trace on the database which synching. This will record all sql queries running. Review the trace file after the synch stops and look for a query that is deleting from partspricing. It will probably be
a very large SQL query with many discount group codes in the "IN"
clause. Copy this to query analyzer and try to run directly from there.
Once the unnecessary discount groups are removed, the synch should run much faster.
Edited by: T. Verholt on Nov 9, 2009 12:49 PM
Edited by: T. Verholt on Nov 9, 2009 12:50 PM

Port 993 error message, now can't set up MacMail for GMail account.

I've been using MacMail for years without a problem. Recently a little exclamation point came up with an error message indicating that the server couldn't connect with the 993 port for my Gmail account. After trying to update my software, restart the program, etc etc I deleted the account, thinking I'd just recreate a MacMail connection to my Gmail account. Not I'm receiving an error message that the server imap.gmail.com is not responding, and I can not set up a MacMail account linked to my Gmail.
I've seen lots of people with this problem, but no sufficient answers to correct it. I am not using a portable device, I am using my iMac to try to make this happen.
Please help! Any incite is much appreciated.
Thank you.
Emily

Hi Emily,
For port 993, is SSL checked & authentication = Password?
Could this be it?
Gmail send but not receive...
Here are two steps that have come in handy in related situations
1) login to gmail on your computer or device via a web browser
2) once logged in successfully, go to this URL to unlock:
https://www.google.com/accounts/DisplayUnlockCaptch

MIRO : Error message when i post an invoice

Hi,
When i post an invoice in Tcode : MIRO i have this error message : "Moving average price for material is negative: Material 120462 Plant M411"
Please how to solve this ?
i tried differents changes in the average price for this material but i still have the same message
I need ur help
Regards

Hi,
This error usually comes when the price difference for the material is not posted to the price difference account but it gets adjusted to the MAP of the material master. This happens when there is no stock of that material and if any order impacting that material gets settled, thereby the system adjusts the price difference with the material master price and does not post any separate entry to the price difference account.
Now please correct the price of the material master through MR21 and make it to hold the correct price.
Once this is done then subsequent entries through MIRO etc would be possible.
Hope this helps you.
Cheers,
Rajan.

Error Message when trying to set up wireless security WRT160N

I recieved the following error message when I tried to set up my wireless security;"Exception has been thrown by the target of an invocation" What does this mean and how do I fix it?

If you are using LELA delete it from your computer. It is not needed. Connect viw your wired computer to 192.168.1.1 username blank password admin (or whatever you made it) and configure your router manually.

Error Message F5 702 while posting Invoice using MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help us?
Regards,
Anitha

Hi
Please provide the long text of the Error message.
From the Error description , my understanding is , there is confilct between Reference date format and Asset value date.Please check in Asset accounting settings.
Please provide the long text fo the error message, so that we try to give appropriate solution.Please check any OSS note apllication required for this since you are saying bout upgradetion from 4.7 to 6.0
Regards
Ramakrishna

Error message when trying to set up shared printer

I can't seem to add my ancient agfa imagesetter to my list of printers. The rip software is running on an old mac running system 9. I've tried typing in the printer's IP address, but that doesn't work either.
So I thought I could work around that by sharing the printer from my G5 which is running system 10.4. So Mountain Lion now sees my agfa in the shared printer list, but when I go to add it, the error message is "Unable to download the software from the server at this time."
My best guess would be an issue with sharing permissions, but I am open for suggestions. I can't add any of the printers from the shared printer list, so it is not my agfa that is the problem with my workaround solution, it is a "sharing" problem with my G5.
Ideally, I'd like to print directly to my old rip, but if I can't, if anyone can help me solve the "sharing" puzzle, I would greatly appreciate it!!

If you are using LELA delete it from your computer. It is not needed. Connect viw your wired computer to 192.168.1.1 username blank password admin (or whatever you made it) and configure your router manually.

Error Message FICUSTOM101 when Clearing/Payment Invoice

Hi All;
    we are making a clearing by F-32 (clear customer create residual item) and system returns an error message "Invoice Reference & does not reference an invoice". We use the program RFFMS200, payment selection with Payment matching Active. Do you know how can I solve it?
Thanks
Regards,
Gustavo

Hi,
As described in the note 446049 the error message FICUSTOM 101 is customizable and in order to avoid this message you can
deactivate it. You can make it in customizing (transaction SPRO) under "Public Sector Management   > Funds Management
Government   > Basic Settings   > Change Message Control".
I hope this helps.
Regards
Ravinagh Boni

MSS - Compensation Profile iViews Error Messages (Parameter CREVI not set)

Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.

Enter in the iview PCD portal content :
iView Compensation Planning - edit iview - in propertes search for the field Compensation Review (CREV) it's optional and fey from SAP Table T71ADM08
Edited by: Javier Ignacio Serrano Zamorano on May 5, 2010 10:20 PM

Error Message "Delete price or set "Invoice Expected Indicator" in PO.

Similar Messages

Maybe you are looking for