Error message: E:Z1:019 while creating Group Chart of Account( FSP0)
Hi All
I am having issue while crating new GL Account at FSP0 for Group Chart of Accounts. The Group COA has been copied from CONS COA for your kind information.
SYSTEM: ECC6.0
Please any one has idea about how to handle this problem.
Error Message: E:Z1:019 Message No. Z1019
Appreciated your help/suggetions
Thanks
Venkata
Hi,
Acccording to the code of the message, it's a user-defined one. Therefore, you should check your settings. Most probably, you have activated user-exit for accounts master data (SAPMF02H enhancement).
Regards,
Eli
Similar Messages
-
Error while creating group chart of accounts
hi
i am learning sapfico now.while i was practicising to create group chart of accounts ,i got an error"group chart of accounts not created to a/c no 111111.".first i created chart of accounts code for group chart of accounts.then i have created chart of accounts per company code.like wise i have created 2 account groups and 2 retained earning a/cs(1 for per company code & 1 per group chart of account purpose)
while i was creating GL master records in FS00 i got the error like that.any any body please help me.Hi,
Have you entered "111111" in the filed group account number? If so, this account should be available / created in your group chart of account.
Hope it helps
Saravanan.A -
i have never been able to migrate my ibooks library from iTunes to ibooks. Setup stops during creating ibooks library with the following error message:iBooks quit unexpectedly while creating your library.
Hello cpikehfx,
Welcome to the forums.
You can try one of the two options below to work around your issue.
Drag and drop the files from the desired music folder to the BlackBerry Music folder using the computer.
Open the desired music folder on the computer
Go into Computer or My Computer and open the BlackBerry network drive
Open the Music folder
Drag the desired music files from the computer music folder to the BlackBerry Music folder
Try a different Windows profile.
Go into the Control Panel and create a new user account
Put some music files in a folder that is accessible by all profiles or transfer them to the BlackBerry device
Log out of the current profile and log into the new profile
Transfer music into iTunes or Windows Media Player
Launch BlackBerry Link and go through the setup configuring the music source of your choice
Click on the Computer name in the bottom left corner of Link
Select Music on the left side
Drag and drop the desired music files from the list to the BlackBerry name in the bottom left corner of Link
If neither of these options work for you then you will want to contact your mobile service provider and ask that this issues be escalate to BlackBerry support for investigation.
Hope this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Mandatory fields while using Group chart of accounts
Hi,
Which are the mandatory fields while maintaining GL accounts in FS00 if i am using Group chart of accounts.
And how attached these group chart of accounts gl to the operational chart of account GL.
rajHi,
the assignment from operational chart of accounts to group chart of accounts is done in OB13. Follow the steps in Customizing IMG FIn. Acc. (new) / Consolidation preparation (new) / General specifications / G/L and FS Charts of accounts...
Best regards, Christian -
How to create a error message for Deleted batch while creating a PO
Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhiin badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check. -
Error Message no. MM214 while creating material master
Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regardsHi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P -
Linking Multiple Group Chart of Accounts
Hello,
Our organizational structure is like
ABC Holding Group
in ABC Holding Group there are several group of companies like AB Group, BF Group etc.
In AB Group, we have 2 companies PERU and JKRY
We have some confusion about the structure of COA in SAP, we are setting Operational Chart of Accounts for PERU and JKRY and will assigned Group chart of Accounts for AB Group then is it possible to assigned AB Group to ABC Holding Group by using ABC Holding group (Group chart of Account)?
ABC Holding Company (Group Chart of Accounts) Assigned AB Group COA
AB Group (Group Chart of Accounts) Assigned PERU and JKRY Operational Chart of Accounts
Thanks,
AbidHi Suresh,
Group Chart of Accounts Mainly Used for Consolidation Purpose,
Follow the Following Procedure for Config Group Chart of Accounts,
1) First Create Group Chart of Accounts in T.Code:OB13
2) than Create Create the Operation Chart of Accounts same T.Code: OB13
3) while Creating the Operational Chart of Accounts,
In Consolidation
Group of Chart of Accounts: Here you assign earlier you created Group Chart of Accounts,
4) Than In FSP0 Create the Group Chart of Accounts, this Code you Have to assign while you are Creating the Operational Chart of Accounts -
Add Group Chart of Account.
Hi,
What need to be consider to add a group chart of account to an existing operating chart of account?
Thanks,
xjHi,
u can create group chart of accounts thru ob13 and after that assign group chart of accouints to operating coa thru ob13 and maintain account groups thru obd4 for group coa and first create the group account(g/l) thru FSP0 and this account u can assign in operating coa thru fs00 here in first tab itself it shows the group account number u can assign and save when ever u post the transaction those values are automatically stored in group account number.
if u have any doubt let me know.
Thanks and Regards,
Nauma. -
How to see the consolidate report of Gl banlance (Group chart of account)
Dear All ,
We have 10 company code ,Each company code we assigned same chart of account.But Consolidate and reporting purpose we created Group chart of account.
Because when i saw the gl account balance ,it showing 10 company code line item for this reason we created Group chart of account created and assigned all gl account in operating chart of account.and group chart of account assigned in operating chart of account.
But now i am not able to see the consolidate report of all company code totals.
Can you guide me where i can see the consolidate report.of all company code trail balance and balance sheet.
Thanks in advance
thanks and Regards
Girish.Hi Javeed,
Thanks for immediate respose.
But when i run f.08 it will show company code wise.But i want to see total balance of all company code so that i created group chart of account.
Is there any method to see the total balance of all company code
OR
Any other method to see all company code total balance.
thanks and regards
Girish -
Group Chart Of Accounts and Group Account Number
Hi SAP Gurus,
For the sake of consolidated reporting, we are planning to create group chart of accounts and assign a Group account number to the GL account master. The structure is going to be like this:
Operating Expenses (Group Account : 461000).
Air Conditioning Exp (GL account 461000001)
Elevators (GL account 461000002)
Coffee and snacks (GL account 461000003)
This is being done to achieve a detail level reporting at the company code level and a consolidated reporting at a group level where the reporting would be based on group account or FSIs. We would define a financial statement version based on FSIs.
My question is : do we need to activate the consolidation (EC-CS) module to push the data to the FSIs or the data would flow automatically to the group account if we assign this to the GL master. If we go to fetch the data from the ECMCT table, do we need to have a consolidation unit?
Any inputs are highly appreciated.
thanks
sriHi,
There are certain preliminary steps to be carried out in ECCS. You can find them under SPRO->Enterprise Controlling->Consolidation->Integration: Preparation for Consolidation.
You need to choose the type of consolidation, create Company, link it to Cons Unit in ECCS, Creating/Copying FS Items (each account in Group COA will have an FS Item; 1:1), etc.,
After the setup, you actually need to carry out Rollup or Flexi Upload for importing FI data into ECCS FS Items. This is done to Data Monitor - CXCD.
In ECMCT, typical selections would be Dimension, Cons Unit, Cons COA, FS Item.
I suppose these preliminary steps are requried for the data to flow to FS Items.
Hope this clarifies.
Rgds. -
Error while creating Group Asset
Dear All
While Creating Group Asset I am getting the Following error:
No depreciation area in company code 1000 allows group assets.
Message no. AY160
Diagnosis
You cannot create group assets in company code 1000. There are no depreciation areas that can manage group assets in this company code.
Procedure
Make sure that you really want to create a group asset in company code 1000.
If so, then allow group assets in the desired depreciation areas.
Please advice.
Thanks & Regards
KanwaljitHi,
Check the config in OAYM and OAAX.
Then your issue will get solved.
Thanks,
Srinu -
After a complete crash of my iPad 3 (WIFI only) because of updating to iOS 7.03, I try to restore my config from iCloud.
I managed to get into the settings assistant and enter my Apple-ID (which is valid as checked via iTunes).
But then I see the error message "Apple ID cannot be created - invalid device while upgrading mme delegate account".
I have no clue what the mme delegate account is but need my data back.
Any suggestions?All you need to do is restore the iphone in itunes as new
and then set up as new
after this is done
then you can restore from itunes back up with out any error!!
-Johnny -
Error while creating a PO with Account assignment
HI MM Gurus
In our case, we need to create the STO for account assignment cat `Unknown`.
In SPRO I maintained combination of account assign cat and item cat.
Now, while creating a PO with Account assign U we get Error message - ME069 :Unknown account assignment not defined for use here.
Please advise how to resolve this issue.Hi
When you are posting actuals, you need to give true account assignment object. With U (unknown), system cannot identify which account to be posted. Change account assignment in PO to another.
In standard SAP Unknown account assignment is not allowed in PO's. Only exception is Blanket PO.
Unknown is allowed only in PR and Blanket PO.
The reason is logically you are releasing the PO to the external vendor or Plant in this case you must know the account assignment.
Regards,
Ninad Kshirsagar -
ABAP Dump while creating Group Asset
Hi all
I am getting the following dump while creating Group Asset through AS21-
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Except. CX_SY_REF_IS_INITIAL
Date and Time 19.11.2007 21:16:06
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLGLO_FIAA_SCREENS" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in procedure "SET_MANAGER_FOR_UPDATE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "GO_ASSET_MAINDATA").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Source Code Extract
Line SourceCde
545 * -->P_LS_WORK text
546 * <--P_LO_ASSET_MANAGER text
547 * <--P_LO_TIMEDPNDNT_MANGER text
548 *----
549 FORM set_manager_for_update
550 USING
551 is_work TYPE raist03
552 CHANGING
553 co_asset_manager LIKE go_asset_manager
554 co_timedpndt_manger LIKE go_timedpndt_manager
555 ct_err_msg TYPE tt_err_msg.
556
557 DATA:
558 ls_asset_maindata TYPE gty_s_asset_maindata,
559 ls_anla_key TYPE anla_key,
560 ls_err_msg LIKE LINE OF ct_err_msg.
561
562 * check operation
563 IF is_work-kz EQ con_ins AND
564 is_work-flg_unr NE on.
565
566 MOVE-CORRESPONDING is_work TO ls_anla_key.
567 ls_anla_key-mandt = sy-mandt.
568 ls_anla_key-anln1 = is_work-anln1_new.
569 * start of Note # 954513
570 IF ls_anla_key-anln1 IS INITIAL.
571 ls_anla_key-anln1 = is_work-anln1.
572 ENDIF.
573 * end of Note # 954513
>>>>> ls_asset_maindata = go_asset_maindata->get( ).
576
577 * clone time-independent asset data manager
578 TRY.
579 co_asset_manager = lcl_amd_mngr_clone_factory=>clone_asset_manager( ls_anla_key ).
580
581 CATCH cx_faa_asset.
Any1 has a clue where I might be going wrong?
Cheers
HrishiHello Hrishi
I have researched your issue and note 1063792 should resolve it. The
SAP_APPL that it is included in is SAPKH60011. I recommend you to upgrade to the latest support package available to avoid eventual errors.
For program errors you should open a support ticket in the SAP Service Market place.
Regards
Javier -
Error message "update was terminated" while cancelling the billing documen
Hi Experts,
Kindly can you advise on the following issue. We are getting the error message "update was terminated" while cancelling the billing document using transaction code VF11.
Note: The accounting document associated with the billing document is not posted and also note that we have done a check with the Basis team who has confirmed back stating they are seeing the udpate error for the user " ". The log says that the update was terminated because the user was trying to enter some duplicate records into the database.
We could observe that the cancellation document is not created and also we have confirmed with the FI that they still continue to have the billing document open in the customer balance statementu2026
Thanks for your help,
MithunHI Mithun ,
Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
Hopefully it will be done.
Regards,
Nikhil
Maybe you are looking for
-
The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library? An ipod can be synced with only one itunes library at a time. Erasing and syncing replace the contents of this ipod with t
-
Hi, Can anyone tell me how to debug a BSP page?
-
Hi I seem to be getting a number of ghost e-mails with NO SENDER, NO SUBJECT and under that it says THIS MESSAGE HAS NO CONTENT. how do I din these e-mails they are not on my main computer only on the iPad and they will not high light so I can't dele
-
As written in Oracle documents. oracle records each and every tranjaction in redo buffer and as soon as writes to redo file. As redo file is full it switches to another redo file. While switching redo file it archives the the current redo file and th
-
Go back from OS X 10.4.11 to 10.4.8
For some software compatibility related issue I have to go back from OS X 10.4.11 to 10.4.8 or even 10.4.6 How can I do this without having the Insllation DVD? Unfortunately I v lost the installation DVD that came with my laptop. Thanx Shiama