Error message "Enter the unit of measure" in WebClient ???

Hello Experts,
We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BAdi "CRM_SERVICEPROD_BADI" to assign a service product ''INVESTIGATION' whenever user selects service ticket in WebClient.
However, when confirming a Business Partner and accessing the service ticket, an error is getting displayed stating "Enter the unit of measure".
We have already mentioned the unit of measure in Product but it seems it is not picking from there.
Please help me to remove this error.
Reward points assured for useful answers.
Regards,
Amit

Hi Amit
Gerhard is 100% correct. Please make sure that your unit of measures are maintained on the product master(trans COMMPR01).
Use the code below in CRM_PRODUCT_I_BADI to set uom.
if cs_product_i_badi-process_qty_unit is initial.
    cs_product_i_badi-process_qty_unit = 'EA'.
    cs_product_i_badi-process_qty_num = 1.
    cs_product_i_badi-process_qty_den = 1.
endif.
Also, you will find you get error to specify product quantity. This can be done in badi CRM_SCHEDLIN_BADI with code below.
if is_schedlin_wrk-quantity is initial.
   cs_schedlin_badi-quantity = 1.
endif.
Regards
johan.

Similar Messages

How to End the Error message: "enter the password for the exchange account"

i completed configure Exchange Account on my iPhone, but still show the error message: "enter the password for the exchange account"

make sure you don't have 2 step verification in gmail.
otherwise you need to follow
Signing in using application-specific passwords
The codes that you’ll get with 2-step verification don’t work with all applications. There are a few applications that use information from your Google Account (like the Gmail application on your phone, or Outlook) that require another type of code. These are called application-specific passwords.
Some devices and applications that use these special passwords include:
POP and IMAP email clients such as Outlook, Mail and Thunderbird
Gmail and Google Calendar on smartphones
ActiveSync for Windows Mobile and iPhone
YouTube Mobile on Apple devices
Cloud Print
Installed chat clients such as Google Talk and Adium
3D Warehouse, Sketchup, and installed applications
AdWords Editor
Sync for Google Chrome
Gmail Notifier
How to generate an application-specific password
Unlike a verification code that you receive from your phone or through Google Authenticator, application-specific passwords are generated. You don’t have to memorize them, ever - you simply generate a new one each time you need to sign into a particular application. Follow the steps below to generate your application-specific password:
Visit the Authorizing applications & sites page (pictured below) under your Google Account settings.
Under the Application-specific passwords section, enter a descriptive name for the application (label 1) you want to authorize, such as "AdWords Editor – Desktop," then click “Generate application-specific password" (label 2).
You'll then see the application-specific password you just created (3). You'll also see the name you wrote in for the device (4) and a link to Revoke (5) -- or cancel -- the code.
Once you click Done, you’ll never see that application-specific code again. But don't panic: You can generate a new one whenever you’re prompted for an application-specific password by a non-browser device or application -- even a device or application you’ve authorized before.
Using application-specific passwords
When prompted for a password when you sign in to a non-browser application or device that accesses your Google Account:
Enter your username.
Enter your application-specific password in the password field.
If your application has an option to remember your application-specific password or stay signed in, you can select that option so you won’t have to generate and enter a new application-specific password each time you access your account from this application or device.

Error message 'Enter unit of measure' in Webclient

Hello Experts,
We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BAdi "CRM_SERVICEPROD_BADI" to assign a service product ''INVESTIGATION' whenever user selects service ticket in WebClient.
However, when confirming a Business Partner and accessing the service ticket, an error is getting displayed stating "Enter the unit of measure".
We have already mentioned the unit of measure in Product but it seems it is not picking from there.
Please help me to remove this error.
Reward points assured for useful answers.
Regards,
Amit

hi
I had a similar Problem
You will have to assign the base unit of measure in service tab as hours and then in the sales and distribution tab assign the same unit in the sales unit and give minimum order quantity(for e.g-1) & delivery unit ,this you will have to do for all the sales areas you might have mapped in the S&D tab
I'm sure the issue will be resolved
Cheers!!
Regards
Shankar Raj

How to display custom error message if the Required field is not entered?

Hi,
I have made one input field as required field in a view.
I want to display one custom error message ,if the required input field is not entered.
Please help me regarding this.
Thanks,
Deepika

hi deepika....
First go to message pool under webdynpro components.
Create a new message there..of type error.
Enter your text.
Now to avoid null pointer exception , in wdDoInit(), initialise the value
wdContext.currentDateTimeElement().setDate("");
now create an action for submission of data. If field is empty, then within the button write:
msg = wdComponentAPI.getComponent().getMessageManager();
if(wdContext.currentDateTimeElement().getDate().equals(""))
msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true) ;
between begin others put:
regards,
pinki
IWDMessageManager msg = null;

LIV - credit memo : error message shown for unit price variances

hi
In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO). Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
thanks

Hi,
If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
Is this giving you a particular problem?
remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
Steve B

Error Message " Enter a Vendor Number "?

Hi,
When we are executing MIGO 411 K transaction we are getting error message 'Enter Vendor Number'. My requirement is populate vendor dynamically based on combination of Material, Plant, Storage location and Batch. I got user exit for this User-exit (EXIT_SAPMM07M_001) when click on check button.
We found a User-exit (EXIT_SAPMM07M_001) triggered when User clicks on 'CHECK' button. But since the vendor field (LIFNR) is a mandatory field in MIGO 411 K transaction, its throwing an error message 'Enter Vendor Number'.
SO we are not able to populate the vendor number dynamically in user exit.
Can any one help on this ..how to proceed further...
Thanks
Edited by: Venkatesh Padarti on Jan 2, 2008 11:21 PM

All mandatory fields are checked before any processing happens.
The simplest way is to enter a dummy vendor number (create a one-time or a dummy vendor for this purpose)
Hope this helps,
Lakshman

Trying to download iTunes 11.1 but it keeps giving me an error message saying: The feature you are trying to use is on a network resource that is unavailable.

Trying to download iTunes 11.1 but it keeps giving me an error message saying:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
Use Source:

iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How to set error message inside the loop...module pool

Dear all,
     Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.R

If i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
*     Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt

When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

Hi Experts,
When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
Regards,
Sameek

Hi Sameek,
Please refer the below link. Hope it helps.
http://scn.sap.com/thread/1435286
Regards,
Chandan.

Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
Sandesh

HI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu

Error message: "Enter valid currency [Message 173-57]" during Deposit transaction

Hi All,
Is there a specific reason why can't I deposit from a "Multi-currency" cash account to a "specific (i.e., USD)" cash account using the Banking> Deposits> Deposit module.
I have already read below threads related to this issue.
Error message "Enter valid currency [Message 173-57]" during cash deposit
Can't Create Cash Deposit of Journal Entry due to "Invalid Currency" Error
Transfer Between bank accounts in different currencies
GL Postings between different currency accounts
foreign currency transactions
SAP Business One Note: 1260658 - Transfer monies between different monocurrency accounts
I have posted successfully e cash transfer from multicurrency to monocurrency cash account thru Journal Entry, However, I wanted to know the reason why it is not possible to post this transaction thru the Banking> Deposit module.
Appreciate your feedback on this matter.
Thanks!

Hi,
Same error message is appeared in 8.81 PL10. So this is not due to PL. If you select other than local currency at deposit currency, this error appears.
Let me check and update.
Thanks & Regards,
Nagarajan

Error Message (Enter spread / MAD type B ...) while saving sale order

hello,
when i try to create sale order (VA01) , and when i enter the custmer number (befor entring other informations ..) I get this Error Message :
"Enter spread / MAD type B for 05.08.2008 in the system settings"
the message number is : SG117
plz help me to solve this problem.
cordialy
SDA

Hi
The exchange rate buying & selling rate has not been secified for the conversion of amount to another curency
you need to maintain this
please work with your FI consultant on this as exchnage rate spread needs to eb maintained - verify the currency maintained for the cuustomer in the master for this
the settings will be done in the IMG under currencies - type B = Actual period end rate
cheers
Nandu

Error message for the select options

hi.
i want to throw thw error message if the user enters the value not valid(not in the range) for the zregion1 of zbwcntry of the select options.
and user should be able to correct it before moving ahead.
Also,iis not a mandatory field,So if it is initial,it can b blank.
but if the input doesnot lie in the range,it should give error message on the selction screen.
please guid with the line of codes.

Check out this code:
TABLES: PERNR.
SELECT-OPTIONS VO_PERNR FOR PERNR-PERNR.
AT SELECTION-SCREEN ON VO_PERNR.
IF VO_PERNR IS INITIAL.
    MESSAGE 'Enter some employee IDs' TYPE 'E' DISPLAY LIKE 'S'.
ELSE.
    IF '000001' NOT IN VO_PERNR.
      MESSAGE 'Employee id: 1, not selected' TYPE 'E' DISPLAY LIKE 'S'.
    ENDIF.
ENDIF.

When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!

I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation.

After Showing ERROR message make the field editable in subscreen.

Hello Experts,
I have a requirment where i have added a subscreen to the standard screen of ME31K for creating the contract. In my Subcreen i have my custom screen fields that i'm updating in EKKO table through include structure.
Now if user forget to fill the details in my custom fields in the subscreen then i'm giving the error message prompting the user to fill the value in fields.
But the problem is the screen is locked there itself i want to make the field editable so that user can enter some value in the fields. I can not use the stuatus or information message here because doing this i will get the item overview screen which should not come as i want to restrict the user to header details only and fill all the custom fields.
Please provide me with your helpful responses.
Thnaks,
Naveen

Hi Naveen,
Sorry for the delay.
The code which I gave for popup, i hope its being shown in an IF . . . ENDIF.
So in that condition u can add the following :
IF < ur condition >
 < Call message FMs >
 SET SCREEN SY-DYNNR. "this would set screen to current screen which is 0201
 EXIT.
ENDIF.
Other than this if you like you can set some parameters in the PAI of this screen which redirect to current screen based on some conditions.
So u can manually set OK-CODE and CALFCODE as SPACE, but i dont know how much this can impact the process.
So please follow the above code.
This is available in
Main Program SAPMM06E
Source code of MM06EF0F_FCODE_CALL
IF OK-CODE EQ SPACE AND
 CALFCODE EQ SPACE.
SET SCREEN SY-DYNNR.
EXIT.
ENDIF.
Hope this helps.
Regards,
Ateet

Error message "Enter the unit of measure" in WebClient ???

Similar Messages

Maybe you are looking for