Error Message "feature has been locked by system administrator"

I recently moved and tried to reconnect my priniter to the new wireless network but I get an error message saying, "this feature has been locked by your system administrator or person who the person who setup the printer." When I set up the priniter it did not ask me for a password and I have no idea how to unclock the wireless wizard. HELP!

You might have had a nice neighbor who did that for you.
What printer do you have?
You could try restoring the printer to factory. That feature is in the settings menu on most printers.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Similar Messages

This feature has been locked

My printer is showing the following message: "The feature has been locked by the system administrator or the person who set up the printer." This message shows up on my network connection page, fax set up page, etc. How do I remove it? I'm the only one who uses this computer, and I did not lock it... at least not knowingly.
Thanks in advance for any help with this matter!!!
KarenSell

Hi @KarenSel,
Welcome to the HP Forums!
I noticed that you are getting the error, "this feature has been locked", with your printer, and I am happy to look into this for you!
For further assistance, I will need to know: a) The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number. b) If the printer is able to make copies. c) If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I keep getting an error message that asks me to contact system administrator

when I try to reply to certain emails like Ebay I get an error message that says to contact my system administrator

I responded to you here > https://discussions.apple.com/message/22264383#22264383
Please do not start duplicate topics. Thank you

Is this a genuine error message 'ipad has been infected with potential virus'

II was just about to watch a film through my iPad and a new screen opened 'phone updating.com' and the message read 'Virus warning, ipad has been infected with potential virus. Click the ok button to scan your iPhone now.'
I didn't press ok and it wouldn't let me cross out so I checked and updated to the latest version (8.2) and when my ipad restarted, safari opened it on the same error page. I then went to settings and cleared my Safari history which thankfully clearly the page.
My concern now is what if I have something bad (virus?) on my iPad? Or im hoping that because I didn't click okay that all is okay again.
can anyone advise if they have come across anything similar or if I need to do something else?
MAny Thanks

Thanks, that's what I thought. Do you know if there was any other way that I could have cleared the message other than by clearing my safari history, and more importantly, as I didn't click okay, would this have stopped anything else happening to my ipad?

Error Message: Installer has been mis-configured

I'm trying to download the free Acrobat pro trial but am not able to. The error message is "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance." How can I remedy this?

Acrobat 8,9
Download Acrobat products | 9, 8
Acrobat XI and Acrobat X
http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Error message: this feature has been locked by administrator.

HP Officejet Pro 8600 Plus, I cannot find a way to unlock the features that I need to reconfigure my wireless information after changing my router.

Hello everyone,
I would like to try and assist with these issues, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

TS4036 I have an error message that has completely locked my Ipad. It says"This Ipad hasn't been backedup in 2 weeks Backups happen when this Ipad is locked, plugged in, and connected to Wi-Fi" It won't let me do anything and I have tried to reset it. H

How can I unlock my Ipad 2 because it is stuck in the ICloud backup?

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Your account has been locked for the next 3 hours due to

I am posting this message on behalf of people unable to access the site due to locked account status.
I have few co workers in my office getting error "Your account has been locked for the next 3 hours due to
too many invalid login attempts. Please try again later.
". They are trying to access the site with valid userID and Password. Is it possible to do a global check for this issue.
Thanks,
RJ

If your account is locked you cannot edit your personal information, make purchases, or access iCloud or MobileMe.
See this for what to do: "This Apple ID has been disabled for security reasons" alert
appears, http://support.apple.com/kb/TS2446

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Transaction CO Through-postings from FI has been locked Error on Assets

Hallo,
We are on ECC 6.0 EHP5 SRM 5.0 EHP1 SAPKIBKT18
We have the following problem. When we want to confirm in SRM PO's which are booked on an Asset the following error occurs:
System status INCM is active (Confirmation 187950)
Transaction CO Through-postings from FI has been locked (Item 1)
We don't have the error when confirming a Purchase order created on a Cost Center or WBS Element and it only occurs in our productive system. We have checked the following
CO through posting open and/or locked and they are ok (Confirmation on Cost Center and WBS Element works so it should be)
The master data of the PO. Can't see anything there
Master data of the Assets
Autoriation of users who are logged in and the RFC users
We cannot seem to find the problem maybe some of you have encountered this ?
Thanks!

Hi,
Please see below for more inputs
http://forums.sdn.sap.com/thread.jspa?messageID=5330802#5330802
http://forums.sdn.sap.com/thread.jspa?messageID=8874880#8874880
http://forums.sdn.sap.com/thread.jspa?messageID=8646493#8646493
Regards,
Nikhil

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

When I type in my account password, the password "dots" gray out and the message "There has been an error" appears. I cannot access my computer in any way. Any help would be appreciated. Thank you.

When I attempt to sign in to my administrator (or other) account the computer hesitates, the password "dots) gray out, and the message, "There has been an error" appears. I have tried the usual methods of password recovery but nothing has worked so far. I would appreciate any help you can give me. Thank you very much for your attention to my problem.

JD1100 wrote:
I have MacKeeper installed
Oh dear.
Many users will see references to an application called MacKeeper on various web sites and via pop-ups on their browser. Not only is it expensive for what it purports to do (freeware applications that do the same or more are readily available), it can sometimes install itself without the user realising it, and it can be very tricky to get rid of.
Most positive reviews of it have been found to have been paid for by Zeobit (developers of MacKeeper) in the form of ‘free upgrades’ etc. For example (posted by fellow contributor Softwater), on their Facebook page and on their webpage they have this apparent endorsement from UNC Charlotte:
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-18670779-12515 7/450-259/Screen+Shot+2012-06-17+at+17.04.04.png
Softwater contacted the Director of IT at the College of Arts and Architecture UNC Charlotte, about whether they endorse MacKeeper and his response, quoted here, was:
No, please do not download and install MacKeeper. We have seen problems with this software in the past.
MacKeeper has been described by various sources as highly invasive malware* that can de-stablize your operating system, adding that it is unethically marketed, with a history of making false advertising claims, by a company called Zeobit and a rip-off.
For more details about Zeobit’s alledgedly fraudulent advertising and paid-for ‘reviews’, and their dubious marketing practises, read this:
http://stemmings.com/the-truth-about-mackeeper-scam/
Further opinion on it and how to uninstall MacKeeper malware can be read here:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
MacKeeper have recently said that the uninstaller from here:
http://applehelpwriter.wordpress.com/2011/09/21/how-to-uninstall-mackeeper-malwa re/
now works.
This is also worth reading:
http://www.reedcorner.net/news.php/?p=245

There's "your blackberry ID account has been locked for security reason" message

Is there anybody know why there's a message : "your blackberry ID account has been locked for security reason.try again later" when I try to open 'my world' and 'my account' in blackberry app world.
Before that thing happens,there's install suggestion : 'new ID update is needed.do you want to install it now?' (Or something like that) and I choose 'yes',and after that my decice is restarted then I can't open my world,my account,and I can't download anything in blackberry app world because of that message
Thankyou before

same thing with me also, anybody knows what causes of it, how to solve this problem

My iphone has been locked and it shows the message as follows: "iphone is disabled please try after 15 minutes" and i don't remember the password

My iphone 4 has been locked and it shows the message as follows: "iphone is disabled please try after 15 minutes" and i don't remember the password

To enable the iPhone, restore via recovery mode following the instructions in http://support.apple.com/kb/HT1212 and it may be necessary to do so more than once to succeed.

I lost my phone 6 weeks ago, today I got an email saying "iPhone has been locked." does this mean someone has tried to power up my device. I had put the remote lock on the phone when I lost it. Today I sent 2 messages to the phone asking to call my phone

I lost my phone 6 weeks ago, today I got an email saying "iPhone has been locked." does this mean someone has tried to power up my device. I had put the remote lock on the phone when I lost it. Today I sent 2 messages to the phone asking to call my phone

Welcome to the Apple community.
dlondon629 wrote:
I lost my phone 6 weeks ago, today I got an email saying "iPhone has been locked." does this mean someone has tried to power up my device......
Yes, this would seem the most likely reason to me.

Error Message "feature has been locked by system administrator"

Similar Messages

Maybe you are looking for