Error message in applicatio​n builder

Error 6 occurred at Copy in Dist New VI Library.vi->Dist Chk for Destinations.vi->Dist Build App Image.vi->Build Application.vi
Generic file I/O error

Try doing a Save All (File>>Save All) and a "Mass Compile" <Tools>>Advanced>>Mass Compile) before building the executable.

Similar Messages

  • Error message in applicatio​n builder in Build Applicatio​n.vi

    Hello,
    I'm trying to make an executable file but I recive the following error message:
    Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
    Possible reason(s):
    LabVIEW:  The VI is not executable.
    Does anyboy know the reason for this message?
    Thanks. 
    Javier de Pablos

    Hello Jaime,
    I've tried to compile a very simple VI (there is only a while loop that executes nothing and counter is wired to an indicator.
    I've attached you.) and I've got the same error.  So the code or any dynamic VIs are not the problem.
    I've repaired the Application Builder within Control Panel > Add and Remove programs but I haven't resolved the problem.
    Javier de Pablos
    Attachments:
    Untitled.vi ‏13 KB
    gg.bld ‏1 KB

  • DATA SAVED UNLESS ERROR MESSAGE IN WEB INTERFACE BUILDER

    Dear collegue,                                                         
    IN SEM-BPS THERE is a fox that executes a control on the data inserted 
    in the layout. In planning folder when the data are not corrected there
    is a message that lock the date and data cannot be saved.              
    In web interface builder there is the message (with icon "STOP") but the
    wrong data are saved however. This is a serious problem.
    regards,
    DG

    Dear DG,
    when using planning folders there is the feature to run a function upon leaving a layout and upon save. In order to forbid saving of data in case of error the function has to run upon save - and that feature is not available in WEB based planning.
    You can add it by implementing the how to paper "How to run planning sequences on save and other events". You can find it in the service market place http://service.sap.com/~sapdownload/011000358700004491692004E/HowToRunPlFuncOnEvent.pdf.
    This should solve your problem.
    Regards, Olaf

  • Receiving Error Message in Coldfusion Report Builder

    I have installed Coldfusion Report Builder. I connect to my
    RDS server and attempt to run the Query Builder and get the
    following error:
    Object: TDataPanel, gbFields
    Exception:'2) when evaluating instruction Ret($0' is not a
    valid integer value
    See error log for stack trace
    Has anyone seen this before? Does anyone have any idea what
    the problem is?
    Thanks

    Whatever version came with MX7. When I run it and go to help
    and about, it just shows the version info for cold fusion server.
    Not the report builder. I know it is the latest version however as
    I also downloaded and installed the latest version from
    online.

  • How to avoid getting bogus error messages when running a build file?

    Consider the following fragment in a build file:
    <var name="component.key" value="provisioning.include.atk"/>
    <var name="provisioning.include.atk.domain.hostname" value="localhost"/>
    <echoNested>component.key.domain.hostname=${${component.key}.domain.hostname}<
    /echoNested>
    When we run with ant -v
    Result:
    Property "${component.key" has not been set
    [echoNested] component.key.domain.hostname=localhost
    Expected result:
    [echoNested] component.key.domain.hostname=localhost
    Can someone explain why I am getting the message "Property "${component.key" has not been set"?
    Thanks,
    Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    In your ANT script you can not use "${${" together
    Please refer to http://jaysensharma.wordpress.com/2009/12/06/ant_basics/
    You can do something like this:
    *"build.xml"*
    <project name="webservices-complex" default="runSuccess">
    <property name="component.key" value="localhost" />
    <property name="component.key.domain.name" value="localhost" />
    <target name="runSuccess" >
    <echo message="${component.key}" />
    </target>
    <target name="runSuccess2" >
    <echo message="${component.key.domain.name}" />
    </target>
    </project>
    Edited by: Jay SenSharma on Feb 11, 2010 11:49 AM

  • What is Error 1 in Applicatio​n Builder?

    I'm trying to set-up my app and encounter the message "Error 1 occurred at C:\setup\xyz\internal.llb\Append Report Text.vi".
    Anyone who can explain and tell how to memedy?
    Thanks in advance
    Klaus

    Jonathan,
    I'm presently using 5.1.1, which I upgraded from 5.1.
    Any ideas on this version as well?
    Thx and regards
    Klaus
    Jonathan H wrote:
    > Klaus,
    >
    > Which version of LabVIEW are you using? There was a known issue in
    > LabVIEW 6.0 that was corrected by the 6.0.2 patch. If you are
    > currently running LabVIEW 6.0, I would highly recommend downloading
    > the patch from ftp://ftp.ni.com/support/labview/updates/ or upgrading
    > to LabVIEW 6.1. If you use the patch,ensure you download the LabVIEW
    > 6.0.2 Run-Time Engine as well.
    >
    > Regards,
    >
    > Jonathan Hildyard
    > Applications Engineer
    > National Instruments
    >

  • Error message "F" using Menu Builder

    I have created two movies, saved them as .cp files and also
    exported them as EXE files. I inserted the the EXE versions as
    Items into a MenuBuilder project. I save that project as an .mpg
    file and exported it as an EXE file as well. What I wanted to do
    was send this project as an e-mail to an associate. When they open
    it (Lotus Notes) they get a pop-up box that is labeled "Error" and
    the only description is the letter F. An OK click box closes the
    pop-up. My question is, can I send an exe movie in an exe proejct
    so a user can run it without having to access an .swf file? any
    help is appreciated, thanks!

    Hi [email protected]
    The reason for the F error sounds like you only shipped a
    single file. The MenuBuilder .EXE file. From what you are
    describing, it sounds like you are fundamentally misunderstanding
    how these work. The .EXE produced from MenuBuilder will not include
    the other Captivate movies inside it. You must ship those as well.
    So you E-Mail the three .EXE files, your user saves them all to the
    same folder, then the MenuBuilder should work.
    Hopefully this helps... Rick

  • Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

    Hi!  Hoping someone might be able to help with an odd problem.  I haven't found anything in the forums or the web that match my symptoms.
    I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that.  I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop.  I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
    This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements.  To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project).  This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
    I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD.  But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message.  I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
    Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
    I typically build both DVD and Blu-Ray images from the same material in the same project.  I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built).  And as I mentioned before, this is the first project on which I've even seen this layer break message.
    Any suggestions would be greatly appreciated!  I'd rather not recreate the project from scratch, but I'm worried that I may have to.
    Thanks
    Jon

    The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
    Be sure you "run as administrator" for dual layer projects.
    Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
    Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
    The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
    http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
    Also see these posts:
    Neil Wilkes
    http://forums.adobe.com/message/3466255#3466255
    Neil Wilkes
    http://forums.adobe.com/message/4054265#4054265
    Neil Wilkes
    http://forums.adobe.com/message/4054269#4054269
    Jon Geddes
    http://forums.adobe.com/message/4002647#4002647
    shuchi shrivastava
    http://forums.adobe.com/message/3905911#3905911
    Jon Geddes and Neil Wilkes
    http://forums.adobe.com/message/4003221#4003221

  • Error message-very urgent

    anywhere that i can get a error message list for form builder? i need a referenece for the meaning of each error message. for example, i got the FRM-40735: when-button-press trigger raised unhandled exception ORA-01401.
    thx.

    go to help --> contents (in the form Builder)
    Press Find tab and type FRM-40735, it will take you to information about this error message page.

  • Removing descriptive error messages?!?

    How do I remove the "Build Date/Time" and "Change Number" fields from error messages?
    Can the build date of say Oct 3 2003 provide someone information as to what version
    I am running?

    I see this error messages in the client browser. I see them when the ISAPI plugin
    can't see the backend server temporarily or if there is an Internal Server Failure,
    ISAPI plugin. I believe this is in the WebLogic IIS Bridge.
    "Don Gohn" <[email protected]> wrote:
    Could you provide more information about where you see these error messages?
    Are they in log files, the console, or somewhere else?
    Thanks,
    Don
    "AMS" <[email protected]> wrote in message
    news:4057ebe3$[email protected]..
    How do I remove the "Build Date/Time" and "Change Number" fields fromerror messages?
    Can the build date of say Oct 3 2003 provide someone information asto
    what version
    I am running?

  • Executable build failing with no error message with smtp email VIs

    I have a VI which I want to build into a .exe which will be used as an HMI for a real-time system. I am using the SMTP VIs to text/email me various notifications about the system state. The main VI works fine if run but will not build into an .exe. The error message comes back blank so no help there (LabView 2010). If I just simply disable the portion of the code in the HMI.VI which contains the email VI code, the application builds. I searched for anwers and was unable to resolve the problem. Any ideas? Do I need to include anything in the build that is specific to the LabView SMTP VIs? I'm new to building .exe's so I appologize for any rookie mistakes I may have made.
    Thanks.

    mikeporter wrote:
    You said you searched for answers (on the forum?).
    Yes.
    What did you find?
    I found a bunch of topics on email send errors after the application was built but nothing related to .exe building failures (related to the SMTP/email VIs). I also found topics dicussing the bug that fails to report an (any) error during the .exe build (for 2011). The solution was to install the service pack. if that's my problem then I will have to go through the motions to get that done (corporate computers / lack of persmissons and such).
    What have you tried? This question has been answered many, many, many times.
    I tried what I stated in the OP. If I disable the portion of the code which contains the email SMTP VIs, the application builds, otherwise, the build fails and no error code or description is given.
    PS: probably has nothing to do with the SMTP drivers, per se.
    If the answer has been given many, many times, then I appologize for not being able to find it before posting. Trust me, the last thing I want to is waste my time fishing for answers on the forum, especially when I get a response from forum members who would rather point out that my mis-identified problem has been answered many, many times, rather then just helping me out.

  • When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

    When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

    I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11  itunes v. 9.0   and I just want it to be restored. I need help.  Oh and its an 8 gb ipod touch.

  • Error message on building application

    I'm trying to build an .exe from a folder of VI's that link together, but when I try to build the .exe I get an error message which says 'Error 7 Cannot find Librarian Get Info.vi' I've added this VI to the list of VI's I'm trying to build from and the desktop and still I get this message!

    What version of LV are you using?
    This was a bug in earlier versions that was fixed:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/862567530005f09e862567d10077407a?OpenDocument
    and also:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/862567530005f09e862567d10077407a?OpenDocument
    2006 Ultimate LabVIEW G-eek.

  • Error message while building a DVD: This Image has sector headers:

    I have to build 12 DVDs. I started with one blank, worked fine, then I got this error message on the second one. It allowed me to continue and the first one seemed to play just fine, but what does this error message mean? Why did it not give it to me on the first build? How might it affect my final product?

    I know you said you have made slideshows before, but does this article have anything that applies to you?
    http://support.apple.com/kb/TS2303
    I hope this helps.

  • Heap size full Error message displayed when build par file in Eclispe.

    We are getting below error message.
    [plugin-assemble] Java returned: 1
    [plugin-assemble] at org.apache.tools.ant.taskdefs.Java.execute(Java.java:107)
    [plugin-assemble] at com.mslv.oms.j2ee.deploytool.automation.c.a(Unknown Source)
    [plugin-assemble] at com.mslv.oms.deploytool.api.d.a(Unknown Source)
    [plugin-assemble] at com.mslv.oms.deploytool.anttasks.OMSPluginAssemble.execute(Unknown Source)
    [plugin-assemble] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    [plugin-assemble] at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
    [plugin-assemble] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [plugin-assemble] at java.lang.reflect.Method.invoke(Method.java:597)
    [plugin-assemble] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
    [plugin-assemble] at org.apache.tools.ant.Task.perform(Task.java:348)
    [plugin-assemble] at org.apache.tools.ant.Target.execute(Target.java:357)
    [plugin-assemble] at org.apache.tools.ant.Target.performTasks(Target.java:385)
    [plugin-assemble] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
    [plugin-assemble] at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
    [plugin-assemble] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    [plugin-assemble] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
    [plugin-assemble] at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
    [plugin-assemble] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
    [plugin-assemble] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
    we tried various option to change Xmx & XXMaxPermSize in eclispe ini file.
    -showsplash
    org.eclipse.platform
    -launcher.XXMaxPermSize
    2048M
    -framework
    plugins\org.eclipse.osgi_3.4.3.R34x_v20081215-1030.jar
    -vmargs
    -Dosgi.requiredJavaVersion=1.5
    -Xms64m
    -Xmx1024m
    Your help is highly appreciated.

    I have a couple of recommendations, hopefully they will help:
    1. In the Design Studio installation it mentions that you have to append: -vmargs -Dsun.lang.ClassLoader.allowArraySyntax=true to the shortcut created to launch it. Eclipse won't take both: the configuration on your eclipse.ini and the arguments in the shortcut, I recommend to just use the eclipse.ini
    Make sure that your configuration is what you have specified by going to:
    - In Design Studio open menu: Help ->About Eclipse Platform ->Configuration Details …
    2. When you are using Ant to build, deploy a project you may run into Java Heap problem. You may need to increase the amount of memory Ant is allowed to use for your project, to do that:
    - In Design Studio open menu: Run->External Tools->Open External Tools Dialog…
    - Select the build script you want to change on the left view.
    - Select the JRE tab on the right
    - Set the following as VM arguments: -Xms768m -Xmx1024m -XX:MaxPermSize=512m (this is just an example, adjust the values to your computer specifications)

Maybe you are looking for

  • How to find the user exits?

    Hi i want to know which user exits is available to add a new field in VA11 screen. Thks

  • How can you get a refund?!?!

    Ive had like 3 ipods and all of them have been heaps faulty, my ipods broken and i want a refund. in my warranty it says i can get a refund and that for further info to go to the apple support page. pretty sure ive searched this whole website and all

  • Iweb won't publish

    I am getting the following error message .. when I searched it I found only posts that are 2 years old from pre-cloud days .. but I am on cloud and 10.7.3 "iWeb couldn't connect to MobileMe. Make sure your Internet connection works and try again." I

  • Please Help! A simple question I can't seem to find the answer to.

    Ok so this is probably something really easy but I can't for the life of me get it to work. I got a new Macbook Pro recently and have been building up a new library with my older songs and newer ones I've acquired since the purchase. My problem is wh

  • Illustrator CS4 question!

    where in the heck can I change the size of my document?! Anyone. Its driving me nuts. Once I create a new doc where can I change it if needed? thx