Error Message in Delivery : Quantity falls below minimum inventory level

Version : SBO 2005 A SP01 PL22
Description of Issue: When trying to Add a Delivery you get Error Message: Quantity falls below minimum inventory level [Delivery - Rows - Warehouse Code] [line: 0] [Message 131-14]. You are then unable to Post the Delivery and Print the corresponding Packing List.
Testing Findings: Upon detailed testing of this issue and work with SAP Support it has been determined that the issue is that the Delivery Row Ordered Qty is looking at the OITM In Stock Qty when determining if the full Row Qty can ship instead of the OITW In Stock Qty. This is an issue because due to other "bugs" this Client has encountered their OITW Qtys in other Whses are negative, even though they have the Block Negative Inventory and the Manage Inventory by Warehouse Flags Checked On. This then reduces the OITM Qty below the level of the Delivery Row and you get the above error message.
Example: A Sales Order Row has an Order Qty of 15 for Whse 01 for a particular Item. The OITW In Stock Qty for Whse 01 = 17. The OITW In Stock Qty for Whse 03 = -7. The Block Negative Inventory and Manage Inventory by Whse Flags are both Checked On. The 'Net' OITM In Stock = 10. When you try to Copy the Sales Order to a Delivery and Add the Delivery, you get the above Error Message and it will not allow you to Post the Delivery and Print the Packing List.
Current Workaround: Client is performing Inventory Goods Receipts to bring the In Stock Qtys in the affected Whses to greater than or equal to zero.
Proposed Solution: SAP Development to add logic to SAP Business One to validate the Delivery Row Qtys to Ship against the OITW In Stock Qtys instead of OITM when the Manage Inventory by Whse Flag is checked on.
Supporting Documentation: This DRQ Request relates to Support Message # 864405 2007. All above referenced testing details including example SO#'s, Item #'s, etc. and an entire copy of the Client's database are available and linked to this Message #.

Hi Ramu,
also you can make sure you are choosing the right WH in ctrlshiftS windows if You do, then chek on Inventory -> Inventory report -> inventory status if you have enought and available quantities for the delivery, if you dont then you gonna have to make the PO and the AP Invoice to add more quantity to that item
regards

Similar Messages

Error While Creating Delivery : "Quantity falls below minimum Inventory"

Hi All,
I have an error while creating a delivery in BusinessOne. I have created a new item using the BusinessOne UI. And i created the salesOrder for this item and it was created successfully. But when i tried to create a salesDelivery for this Item i am facing an error that "Quantity Falls below Minimum Inventory".
How can i solve this? How can i add quantities for this item in the inventory?
Thanks in Advance,
RAMU.

Hi Ramu,
also you can make sure you are choosing the right WH in ctrlshiftS windows if You do, then chek on Inventory -> Inventory report -> inventory status if you have enought and available quantities for the delivery, if you dont then you gonna have to make the PO and the AP Invoice to add more quantity to that item
regards

Quantity Falls Below Minimum Inventory Level

Hi!, I have an item that we manage by warehouse, we've set the minimum inventory level to 5000 pieces.
So the MRP has procured me 5000 pieces through a purchase order. I received my item through Goods Receipt PO and now that I want to transfer it to another warehouse I get a message "Quantity Falls Below Minimum Inventory Level".
I though the purpuse of the minimun inventory level was to procure more, not to lock transactions on the item. Is there a setting that I can tweek so I can use my 5000 pieces?
Thank you.

Hi,
That message is a warning only. If you have enough authorization, you could still get all necessary transactions done without problem. The message is not avoidable.
Thanks,
Gordon

Error Message when Delivery Note is created

HI ALL,
          "Quantity falls into negative inventory" error message appears when Delivery Note is created from Sale Orders in SAP B1 system.
          Pls, solve my problem,
         Thanks u so much.
kyimoh
Best Regards

hi kyimoh
Please check Your Item In Stock Quantity status. If your quantity less then ur Delivery quantity. So You have to increase your item In Stock Quantity.
Thanks
Khan Imran

Error message:m8088 delivered quantity is zero

while doing MIRO for import order using purchase order we are getting an error delivered quantity is zero and error message is m8088 can i know to recify this error?

Hii,
Planned Delivery costs or Goods Service items
If possible try the below procedure
Hii,
Follow the below procedure:
SPRO - Material Management - Logistics Invoice Verification - Define Attributes of system messages - M8 088 by Standard SAP it is warning message and if you want to make it error make it as error message
Kumar
Edited by: Kumar Rayudu on Feb 28, 2008 2:38 PM

Error Message when delivery qty more then po qty in MV50AFZ1

Hi
Sap Gurus,
I gt a requirement that while creating deliveries in vl02n
if delivery quantity greater then po qty it should through error
but i have alredy done coding in mv50afz1 user exit its working fine. My problem is if delivery no is differnt for the po no.
it is not giving error because delivery quantity is less for differnt deliveries .
this is the code i have written,
data : v_menge type ekpo-menge,
Getting Quantity from ekpo Table
select single menge
              into v_menge from ekpo
              where ebeln = lips-vgbel
              and ebelp = lips-vgpos.
if sy-subrc = 0.
Cheking the Condition for Delivery Type
   if likp-lfart = 'ZGND' or likp-lfart = 'ZGNL' or likp-lfart = 'ZGNS'.
Cheking Condition if Delivery Quntity More than Po Quantity
    if v_menge < lips-lfimg.
     message e002(zt) with 'Delivery Qty Cannot be Greater than PO Qty'.
    endif.
endif.
endif.
this is checking for single delivery quantiry greater then po qty
but if multiple deliveries it is not working.
Please suggest me to write logic and coding chages.
ravi n
Edited by: Nekkannti Ravi Kumar on May 12, 2008 10:01 AM

Hi,
First u have to find all deliveries againegt PO Item (material). find out total deleviry qty + present delivery qty.
than check with PO qty ..
I think it will solve.............
Gupta.......

Email not getting send: Error message 'No delivery to external email id

Hi All,
Whenever i am trying to send mail to external address from Business Workplace (Tcode: SBWP), it initially sets the status of the mail as waiting with message 'Will be sent after server date:server time'. But after 6 hours, its status changes to error with message 'No delivery to <external email id>.
When i checked in error log (in SOST), it displays the following messages:
1. Document sent
2. Wait for Communications service
3. No delivery to <external email id> (after 6 hours from Document sent/Wait for communications service time)
Please suggest me how to resolve this issue.
Thanks in advance.
Regards,
Shradhanjali Mishra

Hi Shane,
Extremely sorry for the late reply.
I asked the BASIS team to fix the issue.. and i think they did some configuration as a result of which i am not getting any error msg now while sending email.
I guess you also need to check with your BASIS team to fix this issue.
Regards,
Shradhanjali

How to add the error message into Delivery Error Log (VL10A,VL10X)

Hi,
I have a to add my custom message into Delivery creation error log (VBFS, VBSS)
This message should be shown in the Collective process log (VL10X, VL10A).
Please give me the soln to solve this problem.
I have searched in SDN, i didnt get the proper solution
Thanks
Shankar

HI,
Make use of the BADi "LE_SHP_DELIVERY_PROC"
Use the method DELIVERY_FINAL_CHECK.
Pass the error messages in table CT_FINCHDEL.
Regards,
Ankur Parab

Error message from delivery release to sales invoice drawing of data

cannot post parent item with child item from delivery receipt to sales invoice
error message is ar invoice rows- warehouse code lino:0 ],'no matching records found "inventory log message"]
any suggestions on the remedy for this?

the Bom is sales and i've changed the warehouse code so that the parent item together with the child items would be posted from delivery note/release towards the sales invoice,i've tested it at their test database and works just fine without any errors popping out.
ive changed specifically where they draw the child items--instead of DIY001,Ive changed it to warehouse Diy005 warehouse, while i did not changed the warehouse assigned for the parent which is coded as DIY001
Thank you Nat for spending time to answer my query. ive got to test some more data if ever the changed of business partner name would have an effect with the transactions. the reason why i am testing it is that they have a same Bp partner code for two persons.

Error message in delivery

hi Gurus
pls i was getting this error message while tring to create delivery for one of our new plants created "material not define for sales org ARM1 DIST CHAN. lang..E... after going into the error msg it say i should check the following"
.The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
What can i do to resolve this and how do i go about it
Thanks in advance

material not define for sales org
Go to MM02, key in the material code and select the sales views. Ensure that the material which is having the sales area is the same as the one in sale order.
copy conditions specified in Specify copy control for deliveries
do not allow the order to be delivered.
Go to VTLA and check whether you have maintained copy control for your order type to delivery type with the related item category.
thanks
G. Lakshmipathi

Error message : No delivery items could be created

Hi,
I got this error message when I tried to create a delivery from the sales order. Appreciate if someone could advise me on what I have done wrong or missed out.
Thanks!

Dear Friend,
As friend Srinath suggested, check in VOV7, whether the check box Schedule line allowed is checked for your item category..
And also check in VOV6, whether item relevant for delivery check box has been checked or not for your schedule line category..
Both should be checked..
Also, check whether stock exists for that material in the plant mentioned in the sale order..
Thanks,
Venkatesh.S.P

Customer credit limit check and error message in delivery

Hi,
I have a required to block the creation of delivery , if customer outstanding amount is there more than 150 days after the payment due, system should give the error message for this and should not allow to create the delivery till that open item get cleared, i try with OVA8 with risk category 002 and document type category 02 and 03 by selecting the oldest open item check box setting reaction as D status block Days oldestItem : 150 but with this system is still allowing to create the delivery, how to blcok this if i do any changes in the SO then first time it set the static credit limit block but once it is release with VKM3 then it is alllowing to create the delivery, so how to block the delivery creaton.
Is there any user exit in delivery creation VL01N, to check the cusromer open items and block.
regards,
zafar
Edited by: zafar karnalkar on Sep 5, 2011 7:49 AM

Hi
To control the changes in the SO try to control a VOFM subroutine and set it the field 'No credit check' in OVA8. See the VOFM 002 (as a template) but you need the changes over the SO, and this you have in the 001. In delivery I don't know anything (for instance, see SAP Note 415716 - User exits in delivery processing). My idea is use the subroutine 001 to lock the SO, and with the field VGBEL and VGPOS in LIPS, search the status of credit for this SO when you create the delivery, and then, use the proposed userexits in the cited note.
I hope this helps you
Regards
Eduardo

Solution to fix error message when accessing 'Maintenance Tasks' (Toolbox) or ink levels.

If you come across the similar error message after you upgrade the firmware for following printers, please follow the resolution below to fix it.
HP Officejet Pro 8600 e-All-in-One series
HP Officejet Pro 8100 ePrinter
HP Officejet 6700 Premium e-All-in-One
HP Officejet 6600 e-All-in-One
Resolution:
Try either of the following to resolve the issue.
a) Uninstall and reinstall the printer software.
or
b)       Follow the instructions below to delete XmlFileCache directory
Instructions to delete XmlFileCache directory:
Windows Vista/Windows 7:
Go to C:\ProgramData\HP\<PRODUCT>
-    C: is your system directory (usually where windows is installed)
-    ProgramData is a hidden file
-    <PRODUCT> is the product you had installed
Delete the XmlFileCache directory found there
Windows XP:
Go to C:\Documents and Settings\All Users\Application Data\HP\<PRODUCT>
-    C: is your system directory (usually where windows is installed)
-    <PRODUCT> is the product you had installed
Delete the XmlFileCache directory found there
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Good catch! I have been puzzling over this for several weeks and hadn't found a clue. Your post prompted my old brain into action. After slapping myself in the fore head I said "of course its in the ProgramData folder".
needless to say Thank you!
-bill
-bill

Delivery Quantity Control at Purchase Organisation Level

Hi All,
In this scenario, I would like to have a control on the Delivery quantity by a vendor.
Quantity released: 100 pcs for Vendor ABC
Total Number of Plants: 3
Out of this 100 pcs, it can be delivered to any of the 3 plants by vendor ABC. Quantity delivered by vendor to these 3 plants should not exceed 100 pcs in total. How can we have a control for total released quantity at Purchase Organisation level.
Breakup of quantity to be delivered to each plant cannot be given as releasing is done at corporate level.
We checked same scenario by using purchase Info record maximum quantity field. We created purchase info record at Purchase Organisation level.
Scenario 1. which i tested
Maximum Qty:100
PO creation
Plant 1: 100 qty-- No error/warning
Plant 2: 100 qty-- No error/warning
Plant 3: 101 qty-- warning maximum qty exceeded than 100 pcs.
Above scenario will not help me as I need to total release control on all plants together.
Scenario 2. Expected
Plant 1: 60 qty-- No error/warning
Plant 2: 45 qty-- Error, Total released qty exceed by 5 pcs.
Thanks and Regards,
VV

Hi
You cannot do GR for a plant which is not given in Purchase order. Corporate level you can have contract but not Purchase orders. If you have reference purchase organization create a corporate contract and try creating a po against that contract.
regards
Antony

I cannot burn pics or text. I keep getting the error message "device failed to calibrate the laser power level for this media"

I get the following error message whenever I try to burn anything...!..any solutions? Thank you.

When you put in a disk to burn, the burner performs a test burn on a spot of the DVD where data doesn't get placed. This lets the optical burner and computer determine what kind of disc you've given it. The error message is most likely to occur when there's a mechanical problem with the burner or when you have bad data.
I used to work for an Apple reseller and in any week we'd have a couple people bring in their Macs thinking their optical drives were damaged when they really just had bad media. Most people don't realize that CD and DVD media can go bad with age so it wasn't at all uncommon for people to say, "I burned a disc last month just fine." And I'd stick a DVD from our stock into the computer and burn one just fine too. Problem solved for a lot less than the cost of a new burner.
BTW, if you are in a dusty environment or there's a smoker in the house you might also have a dirty lens so a lens cleaning kit wouldn't be a bad investment either.

Error Message in Delivery : Quantity falls below minimum inventory level

Similar Messages

Maybe you are looking for