Error message in F.5d & F.5e transaction

Hello,
I am getting error message while running F.5d & F.5e transaction. The error message says "A breakdown is already running for company code 5000". Message no. FR289
In Diagnosis it mentioned,
"A breakdown run is already active in company code 5000:
Start date 2007-08-16, Start time 08:28:47, User PETER."
Can anybody help me to resolve this.
Thanks
//Rajeev

In most cases ,a previous run of the "Post Balance Sheet Adjustment" report is canceled because of a timeout, for example. The consistency of the update of database tables and adjustment documents to be posted cannot be technically ensured. For this reason, you cannot post any additional adjustments before you reverse the canceled run. The next adjustment would start with inconsistent data and could not post any correct adjustment.
You can reverse the canceled run using report SAPF180S.
Also consider SAP Note 308738 in this context.

Similar Messages

I get an error message when banking online involves seeing transactions that have posted to my bank account

I can get to my financial institution's web page and can login. My account comes up. But when I click on my checking or savings transactions I get this error message in Red "An unexpected system error occurred. Please try your request later. If the problem persists, please contact customer service."
After spending two hours with financial institution and clearing cookies, cache, etc. and creating a new login password the problem persists. I can get to everything involved with the financial institution using Internet Explorer.
No problem exists through the system used by said financial institution.

You have to go to SMTP settings for your email account and enter a password there. Sended and receiving are two different activities managed by 2 differet servers, and each may require a separate user ID and password.

Error message in ME22n transaction

Hi All,
We want to display error message at status bar of me22n transaction for some certain conditon.I am using a user exit where actually i am writing a code.I tried to write like this 'Message E101(ZE) ' but message is not displaying at status bar.
Thanks
Mohit

Hi ,
1 >If message is not getting shown at status bar then is it getting shown as popo up. ?
2 > If message is not at all getting shown then that means your exit is not getting called. Please put a break point inside your exit and exeute me22n and see if your debugger gets triggered.
If Debugger does not get triggered then that mean , either you have not created Project for yoour Exit OR you are using incorrect Exit.
Please revert with your observatins so that can help you further.
Hope this is helpful.
Regards,
Uma Dave

Error in BAPI_ACC_DOCUMENT_POST to post Special GL transactions

Hi,
I could not able to post the Special GL transactions like Bill of exchange payment request through BAPI BAPI_ACC_DOCUMENT_POST. It is giving error message BAPI could not process special G/L transacitons of type W not processed. Do we have any other bapi to process these special GL transactions.
Best Regards,
Radhakrishna.

Hi Arun,
Actually Special G/L Transction of type W i am posting through BAPI_ACC_DOCUMENT_POST
it is saying Special G/L transactions of type w are not supported. I have alreday searched for SAP note did not get anything.
So i thougt of working alternative process.
error message F5 246 Special G/L transactions of type & are not supported
Best Regards,
Radhakrishna.

Handling Multiple Error Messages through EXIT_SAPMM06E_012 for ME28

Dear Team,
After Executing ME28, system will give List of PO's that are to be Released . User will select Multiple PO's and
Press Release button in Application toolbar. once it is relased, User will press save Icon for all released PO's.
Once Save icon is presed, I need to do Validation for Multiple PO's in the user Exit EXIT_SAPMM06E_012 and capture my
ErrorMessages for all Released PO's for which Validation fails.
Here in the given user Exit, one PO will be processed at a time as PO is defined as Import Parameter but it will handle all PO's
and give the output in status bar saying 'Relased Saved' for all PO's which succesfully gonethrough.
once we execute ME28, system is showing list output with PO's to be Released(As system is handling with Write statments). In this case, we dont have scenario of PBO and PAI Modules( where user can correct error if any validation fails) like we have for ME22,etc.
I have Written simpel Error Message in the User Exit.
once i tried to trigger my user exit by Releasing and Saving with One PO, Error Message is displayed ( as information Message
appears) and if i Press Exit button in Error Message, it is coming out of Transaction.
Is there any Possibilty to Handle Multiple Error Messages ( in my case for Valdiation Failed Po's) in ME28 ,after Releasing and Saving , and also user should not come out of Transaction once Error Messages are Displayed.
Thanks and Regards
Suresh

Hi Suresh,
there is a tekpo table to handle all po items. you can put it in loop and do validations.
if any errors through, there may be a ex_messages table of type bapiret2.
or
try like this: MESSAGE E368(00) WITH TEXT-001 TEXT-002.
thanks
srinu
Edited by: srinu rao on Sep 22, 2009 3:43 AM

In which tables are batch input error messages logged?

does anybody know in which table are the batch input error messages logged?
I have to display the error messages which have occured during the transaction
I tried to find out, but i could see only the table BDCMSGCOLL, this table has only the Batch input message number and not the message itself?
does anybody know about the batch input error messages?

hi,
check the sample code below.
messtab is of type BDCMSGCOLL.
Call the transaction and then use T100 to get the message.
DATA: l_mstring(480).
call transaction using
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
                   MODE   ctumode
                   UPDATE cupdate
                   MESSAGES INTO messtab.
l_subrc = sy-subrc.
SKIP.
LOOP AT messtab.
    SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                              AND   arbgb = messtab-msgid
                              AND   msgnr = messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      WRITE: /4 messtab-msgtyp, l_mstring(250).
    ELSE.
      WRITE: /4 messtab.
    ENDIF.
ENDLOOP.

Changing the Error message in the background

Hi Experts,
Is there any way to catch the Error message in the background apart from changing the message type.
Because the error message is coming from a standard function and I want my program should handle the error message. Whether this can be possible if possible can anyone please let me know the process.
Thanks in advance.
Regards,
Srinivas
Edited by: Srinivas Hari on Jun 23, 2009 10:08 AM

Hi Srini,
The question is not very clear still I am trying to answer this.
If my understanding is correct you are trying to run a standard function module in background task in your custom program and that FM is giving some error messages but not raising any exceptions and you are trying to catch those exceptions in your program. If that is be the case then yes you can definitely catch that error messages.
Step 1 : Call function 'XXXX' IN BACKGROUND TASK
Step 2: Call function 'ID_OF_BACKGROUNDTASK'
Step 3: COMMIT WORK and WAIT.
Step 4: Call function 'STATUS_OF_BACKGROUNDTASK' ---> passing the id number which you will receive in Stpe 2.
Basically the step 4 would return you the error messages which would be visible in Transaction SM58.
Regs,
Somnath

EWM : Error message in the in Inbound Queue

During the creation of Inbound delivery in EWM through QRFC..the queue is stuck with an error message
" Error accessing product data administration "Message no. /SCDL/AF032""..Please let me know if you have seen this issue earlier.
ECC: Inbound delivery is created
QRFC: Stuck in the queue and error message can be seen through SMQ2 transaction
EWM: No IBN created because of the errored queue
Thanks,
Syed Ismail
PS: Is there a way to create a new section for EWM queries so that they do not get mixed up with regular WM issues ?

Thank you for your reply. The views are extended and i did look at the SCU set up and they seem to be good. Actually the scenario is that we had a system where all these processes were working fine in a client. A client copy was made to a new system and i am facing issues simulating in the new client.
I faced an issue in the new system where the function module to create IDN and ID itself was not getting determined and it was because of logical system issue in EWM>Interfaces>ERP Integration>Goods movement>Map storage locations ERP and EWM..I have corrected and the queue gets processed now but i run into this new error.
Will investigate a little more and see how it goes...
I have checked out different settings but i was still not able to fid a solution..Did anybody see this kind of message earlier ?

Customizing error message that goes to IP_IN_QUEUE

We are reading IP_IN_QUEUE from soa composite to find out the errors happened at B2B processing and then going to B2B_InstanceMessage table to read the payload associated with the message id to find out the order number to determine the failed transaction.
Is this the only way to go to B2B_InstanceMessage to get the order number to find out the failed transaction? Or is there a way to customize the error message going to IP_IN_QUEUE to send transaction specific id(like order number)? Thanks in advance.
Kathar

Kathar,
is there a way to customize the error message going to IP_IN_QUEUENo, it cannot be customized as B2B generates it automatically as per a predefined format.
Is this the only way to go to B2B_InstanceMessage to get the order number to find out the failed transaction?You should use xpath functionality of B2B 11g. In the document definition, under xpath tab, you may provide the xpath of Order number and at runtime B2B will evaluate the XPATH and store it's value in xpath_value column. So to get order number, you need not to query the payload. You may provide three xpath's at max for a doc def. You may refer -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/b2b_documents.htm#CHDDBEHB
It is also not recommended to query B2B_INSTANCEMESSAGE view directly from any application as it's definition may keep on changing over the release. You should use B2B INSTANCE MESSAGE java API instead -
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e18158/toc.htm
Regards,
Anuj

Getting error message while updating Job attributes using PP03 for IT1641

Hey Guys,
We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
Thanks...
Edited by: Karan Gheewala on Apr 3, 2008 9:06 PM

Solved using Note 123383 - WC: Customizing worker's compensation tables
Thanks,..

Suppress LT03 Error Messages from VL06P?

Hi
We are running VL06P and create TO in Background. The program runs LT03 to do this. But in some cases we have a material locking error or a system cannot find source storage bin error. I looked for notes to suppress the Error messages, but there are no new ones. Note 391972 is already in our ECC 6 system.
We don't mind the errors, but the problem is that the users print the Groups without always making sure that the TO create was 100% finished. That means they have to complete the TO create process and do a Reprint of the Group outstanding. This is actually the first print for the newly created TOs.
Please tell me how can we suppress the Error Messages? SAP already call the transaction with MODE 'N' and we push a button called Create TO in Background. But now it breaks in foreground/dialog causing big hassles for our users.
Thank you and best regards,
Adrian

In VL06P:
Settings -> Subsequent Functions -> Background
Subsequent Functions -> Create Transfer Order
That stops the error messages, just a pity it doesn't do it with the click of one button.

Cancel a SD invoice error message "no authorization for transaction FB08"

Hi Gurus,
I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
regards
Anmol Pareek

Hi Anmol
Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
take help of your basis team.

Error Message in through transaction OVA2

Hi All,
In the transaction OVA2 for the Incomplete procedures, we have a warning message set. We want to set a error message instead. Like if there is an Item with prize 0 the system now displays a warning message( as per setting in OVA2) we want to convert this warning to error.
Can any one please help me on this issue.
Thanks and Regards,
Nimisha Deshpande.

Normally the incompletion log will be filled when some constraints (set through customising) are not met. For instance, you can set up a constraint that certain fields are required (allthough visibly not required on the screen). SAP will check that field and when it's empty, an entry in the incompletion log is created.
From the incompletion log the user can navigate to the point of error and correct the error.
Maybe this is overdone for your requirement, but it's just an idea.

Error Message during PO GR - Please enter a valid transaction Type

During the goods receipt movement 1010 of a Purchase Order, I am getting following error Message:
"Please enter a valid transaction Type"
I am not a Purchasing expert. Could please help?
Thanks and regards.

Hi,
Pl do below 2 things:
1 ) Go to Transaction code = OMBA , Click on Goods receipt Documen type button and check whether MIGO_GR is assigned to DOC Type = WE
2 ) Go to Transaction code = OMJJ , Tick Movement type and select 101 Movement type .
Then You need to click on "Allowed Transaction option ( Left pane ) and see whether transaction code MIGO is mentioned for Movement type 101.
it should solve ur problem.

"Error Message" without interrupting the transaction

We use a VB application to insert/update records in a Oracle database.
Any user is allowed to see all fields, but not every user is allowed to update all fields. We check the right to update in a database trigger and raise an error if a user wants to update a field for which he has no rights.
User X has the right to update field A, but he has not the right to update field B.
Now we want to change the application
If X tries to update fields A and B, we want to accept the new value for A, leave B unchanged and inform the user with a message like an error message without interrupting the transaction.
Has anybody an idea how to implement this?

In the project it's presented:
1) how the servlet can send JSON data depending on the request's parameter
2) how to obtain this data on the client side and show in on the page using jQuery without refreshing the whole site
What You need to do is just to send the error (as JSON data) insetad of the values that are passed now and display this error on the page.

Error message in F.5d & F.5e transaction

Similar Messages

Maybe you are looking for