Error message in logs: LAJO Real error test

We get the following error in b2b.log:
2009.04.27 at 10:09:18 B2BStarter thread: BusinessLogicLayer (ERROR) LAJO Real error test
It happens again if we restart the system. We are at the latest patch level (MLR 9). What does it mean?

Can you please elaborate the Issue and the scnerio. Also please email the b2b.log in DEBUG mode to (mail Id in profile )
Regards,
Dheeraj

Similar Messages

  • Receiving the error message while executing the Real Time DTP

    Hi,
    I am receiving the error message while executing the Real time DTP for Billing data.
    Error Message - Record filtered in advance as error records with the same key exist     RSM2     722
    When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
    Diagnosis
    The existing DTP requires a serialized update because fields are updated
    non-commutatively during the processing run (for example, MOVE).
    Therefore all new data records that have the same semantic key as
    incorrect records that have not yet been corrected in earlier requests
    or earlier data packages of the same request, are filtered out after the
    extraction in a special step. In this way the system ensures that
    incorrect data records are not repeated for your changes, which may not
    contain errors themselves.
    System Response
    The data record is not updated but is written to an error stack.
    Procedure
    Procedure
    Correct all incorrect data records and update them using an error DTP.
    Procedure for System Administration
    I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
    Regards,
    Ram

    Hi Arvindh,
    Its  write optimized DSO.. there is no option to generate SIDs.
    Hi Kiran,
    I checked the link u sent me. Here the main issue is..The function module is standard  and its not allowing me  to do enhancement  point..
    Any idea in using Badi's??
    Thanks all...

  • When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

    The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

    I have the same issue. Does anybody know why this has happened

  • LE_SHP_DELIVERY_PROC Error message through Log .

    Hi,
    I'm working on a BADI LE_SHP_DELIVERY_PROC inside the method FILL_DELIVERY_ITEM. I have to show an error message over here. If i passed like MESSAGE e000(zless) WITH text-006 text-007 it is displaying message but it is come out from the layout of the transaction in scope.
    Te be more specific, when the pop up of message comes out and after that the user click on the "Exit" button, the  system should go back on the previous layout of the report to allow the user making another selection.
    I'm using Vl10D transaction.
    Now I'm trying to generate the error message through log by CT_LOG internal table . I have to block the deliveries whichever is creating through this transaction. If for a particular STO there are different loading points then I need to block the deliveries.
    I'm trying to block the current delivery using  IS_LIKP-LIFSK = 'X' and also I need to block the previous delivery IT_XLIKP-LIFSK = 'X'.
    strange thing is happening with STO which has 2 deliveries are getting created (because error msg is not getting tirggered thorugh log),  though I have blocked the deliveries.
    Could you please let me know how can i populate this error message through log as well as I can block the deliveries?
    Thanks in advance,
    Abhijit

    Hi
    To lock the delivery, see Note 198137 - VL10: Customer-specific enhancements / user exits and use this userexits. To populate the log I think that using the structure CT_LOG in the BADI is OK. Check when are called the userexit and BADI.
    I hope this helps you
    Regards
    Eduardo

  • Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yeste

    Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yesterday. Anyone else having this problem? Thanks.

    I am having the same problem and took the following steps to mitigate it to no avail.
    1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
    2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
    3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
    Please advise.

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Error Message in log when creating DBReporting

    Hi Folks,
    After executing script (runtetl.bat) to complete P6 Reporting Database next message appears in log (something seems to be wrong in the project)
    <04.29.2011 11:53:56> transform [INFO] (Progress) - Processed     20.0% of WBS objects
    <04.29.2011 11:54:02> transform [WARN] (Message) - Spread loading thread 2: There was a problem processing a record for the ACTIVITYSPREAD table : NumberFormatException -- For input string: "00 AM"
    Object Identifier: ACTIVITYSPREAD Project CXRS Draft (Glenn Counsell) (EU55 - CXRS GC)
    Primary Key(s): 19797
    <04.29.2011 11:54:02> transform [ERROR] (Message) - Spread loading thread 2: ERROR FOR ACTIVITYSPREAD
    java.lang.NumberFormatException: For input string: "00 AM"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:458)
         at java.lang.Integer.parseInt(Integer.java:499)
    Similar message appears after referring to calendar
    <04.29.2011 11:56:24> transform [INFO] (Progress) - Processed     100.0% of PROJECTRESOURCE objects
    <04.29.2011 11:56:44> transform [WARN] (Message) - There was a problem processing a record for the CALENDAR table : DAODataAccessFailure -- NumberFormatException -- For input string: "00 AM"
    Object Identifier: CALENDAR Standard
    Primary Key(s): 8473
    <04.29.2011 11:56:44> transform [INFO] (Message) - ERROR FOR CALENDAR
    com.primavera.er.stage.dao.BaseDAO$DAODataAccessFailure: NumberFormatException -- For input string: "00 AM"
         at com.primavera.er.stage.dao.CalendarDAO.retrieveBusinessObject(Unknown Source)
         at com.primavera.er.stage.dao.CalendarDAO.a(Unknown Source)
         at com.primavera.er.stage.dao.CalendarDAO.updateVirtualFieldsForFullLoad(Unknown Source)
         at com.primavera.er.stage.dao.BaseGlobalContextDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.dao.BaseAPIDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$FullApiETLProcessor.a(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$ETLLoadProcessor$1.run(Unknown Source)
    Original Exception:
    java.lang.NumberFormatException: For input string: "00 AM"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:458)
         at java.lang.Integer.parseInt(Integer.java:499)
         at com.primavera.infr.calendar.CalendarUtil.a(CalendarUt
    and another one referring a wbs
    <04.29.2011 13:39:01> transform [WARN] (Message) - There was a problem processing a record for the ACTIVITY table : DAODataAccessFailure -- NumberFormatException -- For input string: "00 AM"
    Object Identifier: ACTIVITY > FDR CXRS port plug components complete in wbs F in project with id 19797
    Primary Key(s): 411986
    <04.29.2011 13:39:01> transform [INFO] (Message) - ERROR FOR ACTIVITY
    com.primavera.er.stage.dao.BaseDAO$DAODataAccessFailure: NumberFormatException -- For input string: "00 AM"
         at com.primavera.er.stage.dao.ActivityDAO.retrieveBusinessObject(Unknown Source)
         at com.primavera.er.stage.dao.ActivityDAO.retrieveBusinessObject(Unknown Source)
         at com.primavera.er.stage.dao.BaseProjectContextDAO.doUpdateVirtualFieldsPerProjectsInErrorRecoveryMode(Unknown Source)
         at com.primavera.er.stage.dao.BaseProjectContextDAO.updateVirtualFieldsPerProject(Unknown Source)
         at com.primavera.er.stage.dao.BaseProjectContextDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.dao.BaseAPIDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$FullApiETLProcessor.a(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$ETLLoadProcessor$1.run(Unknown Source)
    Original Exception:
    java.lang.NumberFormatException: For input string: "00 AM"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:458)
         at java.lang.Integer.parseInt(Integer.java:499)
         at com.primavera.infr.calendar.CalendarUtil.a(CalendarUtil.java:1686)
         at com.primavera.infr.calendar.CalendarUtil.parseCalendarData(CalendarUtil.java:1605)
         at com.primavera.bo.rules.calc.BOCalendarCE.a(BOCalendarCE.java:164)
         at com.primavera.bo.rules.calc.BOCalendarCE.calc_DailyWorkTime(BOCalendarCE.java:58)
    Fortunately these errors does not interrupt ETL processes but do you have any idea about how to fix them?

    Hi
    Is the Server Standalone? If so run this command
    sudo changeip - 10.31.3.135 10.31.3.135 KNWS3135 KNWS3135.ad.ewsad.net
    enter the password when prompted and restart the server.
    If the Server is an Open Directory Master issue this command:
    sudo changeip /LDAP/127.0.0.1 10.31.3.135 10.31.3.135 KNWS3135 KNWS3135.ad.ewsad.net
    enter the password when prompted and restart the server.
    Before you do this can I ask if the DNS Service is being provided by an Active Directory Domain Controller? In other words a Windows Server. If it is and the Windows System Admin has created a DNS entry for your server then make sure there is a Reverse Pointer entry for your server. Make sure the Windows System Admin uses the KNWS3135.ad.esad.net as the FQDN (fully qualified domain name). Enter the AD Server’s IP address as the Primary IP Address in the DNS Server Field on your server and then issue this command:
    host KNWS3135.ad.ewsad.net
    You should see something like this:
    KNWS3135.ad.ewsad.net has address 10.31.3.135
    follow this with:
    host 10.31.3.135
    You should see something like this:
    135.3.31.10.in-addr.arpa domain name pointer KNWS3135.ad.ewsad.net.
    If you are seeing this after you have made sure the Windows System Admin has created the relevant PTR entry for your server then issue the changeip command again:
    sudo changeip -checkhostname
    This time it should report 'the names match there is nothing to change'
    Hope this helps, Tony

  • Error message in logs on ASR903 with IOS XE 3.9.0

    Hi all,
    I have the following error message in logs on our ASR903 running IOS XE 3.9.0 :
    Jul 10 10:01:34.273 EET: %IOMD_IMFPGA-3-MDIO_WRITE: SIP1: iomd:  An MDIO write has failed for addr: 0 reg: 1f data: 0
    Jul 10 10:03:58.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:11.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:18.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:26.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 11:46:16.627 EET: %IOMD_IMFPGA-3-MDIO_WRITE: SIP1: iomd:  An MDIO write has failed for addr: 0 reg: 1f data: 204
    Any idea what this message could mean and if there is any workaround?
    I found a BUG but it's not well documented :
    CSCuf05039
    Symptom: I2C-WRITE and MDIO_READ error messages are displayed on the Cisco ASR903 router.
    Conditions: This issue occurs after an interface module hard or soft OIR is performed.
    Workaround: There is no workaround.
    show platform    
    Chassis type: ASR-903            
    Slot      Type                State                 Insert time (ago)
    0/0      A900-IMA1X          ok                    5d02h        
    0/1      A900-IMA1X          ok                    5d02h        
    0/2      A900-IMA8S          ok                    5d02h        
    0/3      A900-IMA8S          ok                    5d02h        
    0/4      A900-IMA8S          ok                    5d02h        
    0/5      A900-IMA8S          ok                    5d02h        
    R0        A903-RSP1B-55       ok, active            5d02h        
    R1        A903-RSP1B-55       ok, standby           5d02h        
    F0                            ok, active            5d02h        
    F1                            ok, standby           5d02h        
    P0        A900-PWR550-D       ok                    5d02h        
    P1        A900-PWR550-D       ok                    5d02h        
    P2        A903-FAN            ok                    5d02h        
    Slot      CPLD Version        Firmware Version                       
    R0        11102133            15.3(2r)S                          
    R1        11102133            15.3(2r)S                          
    F0        11102133            15.3(2r)S                          
    F1        11102133            15.3(2r)S           
    show platform diag
    Chassis type: ASR-903            
    Slot: 0, A903-RSP1B-55      
      Running state               : ok
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:03:04 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Sub-slot: 0/0, A900-IMA1X
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/1, A900-IMA1X
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/2, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/3, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:05 (5d02h ago)
      Logical insert detect time  : 00:04:05 (5d02h ago)
    Sub-slot: 0/4, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:10 (5d02h ago)
      Logical insert detect time  : 00:04:10 (5d02h ago)
    Sub-slot: 0/5, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:21 (5d02h ago)
      Logical insert detect time  : 00:04:21 (5d02h ago)
    Slot: 1, A903-RSP1B-55      
      Running state               : unknown
      Internal state              : offline
      Internal operational state  : unknown
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:00:00 (never ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: R0, A903-RSP1B-55      
      Running state               : ok, active
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:01:47 (5d02h ago)
      Became HA Active time       : 00:07:08 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: R1, A903-RSP1B-55      
      Running state               : ok, standby
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:04:12 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: F0,
      Running state               : ok, active
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:02:49 (5d02h ago)
      Hardware ready signal time  : 00:02:41 (5d02h ago)
      Packet ready signal time    : 00:04:42 (5d02h ago)
      Became HA Active time       : 00:05:56 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: F1,
      Running state               : ok, standby
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:04:21 (5d02h ago)
      Hardware ready signal time  : 00:04:20 (5d02h ago)
      Packet ready signal time    : 00:05:56 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: P0, A900-PWR550-D
      State                       : ok
      Physical insert detect time : 00:02:48 (5d02h ago)
    Slot: P1, A900-PWR550-D
      State                       : ok
      Physical insert detect time : 00:02:46 (5d02h ago)
    Slot: P2, A903-FAN
      State                       : ok
      Physical insert detect time : 00:02:47 (5d02h ago)
    Thanks,
    Robert

    Hi Reza,
    Thanks for your reply...yes lldp is enabled...and so far we did:
    - Reapply voice-vlan configuration
    - Disable/Enable LLDP
    - Reboot the Switch
    - Reset the Phones
    ... and only if we do "debug lldp" then it is working...strange

  • HT204266 Every time i try downloading anything from app store it gives an error message saying "This is not a Test User account. Please create a new account in the Sandbox environment."  and i didn't use jailbreak and never downloaded cracked software

    Everytime i try to download from app store it gives me an error message saying "This is not a Test User account. Please create a new account in the Sandbox environment." although i never used jailbreak or downloaded cracked software

    Yep, I've been reading through other threads on lots of different sites over the last few hours and I can't seem to find a working solution, even though some seem to have worked for other people.
    Most of them hadn't been updated in a while so I made my own post to see if anyone has anything new.

  • I get a "Landing - Error" message after logging in

    I get a "Landing - Error" message after logging in Any ideas?

    Hi ,
    Thanks for joining the EE Community.
    Have you tried clearing the cache in your web browser or using a different browser?
    Thanks
    James

  • Getting the error message while logging through work place after upgrade

    Hi,
    C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
    Application not found
    Getting the error message while logging through work place.
    It is urgent
    Thanks,
    Sri.

    After upgrading the Batch file it worked fine.
    Thanks,
    Sri.

  • When I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

    when I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

    Have you tried to export different images as a test to see if it is related to the one you are getting the error on? Also try to export to a different folder other then the Desktop, again to see if the problem is connected to that folder.
    Another thing to do is run the Aperture Library First Aid on the library. Hold the option and command keys down while you start Aperture. First run the Permission Repair and see if that helps. If not quit Aperture and restart and run the Library Repair and try.
    Post back if you still have problems
    regards

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
    Thank you.

  • I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

    I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
    You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
    [ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
    http://sourceforge.net/projects/kernelex/

Maybe you are looking for

  • How can send Interactive PDF form as an Email attachment?

    Hi Experts, I am generating Interactive form with one SUBMIT button. User will edit form data and clicks on SUBMIT button. There I need to send an email notification to user with PDF attachment. How can do this? Where Can I capture binary format of t

  • Podcast removed from the iTunes directory as a result of technical problem

    I received an email from iTunes informing me that my feed: http://www.mevio.com/feeds/d4emixtape.xml Had been removed from the iTunes directory because the feed had some sort of technical issue. I've checked the feed a couple of ways including using

  • Query Output in specific way

    Team, Query - select d.Hostname, od.data from zDevice d join zOpaqueData od on d.ZUID = od.object WHERE (od.name = 'com.novell.zenworks.data.configSettingForContentReplication') order by Hostname Output - <ContentSatelliteServer><ServersToUse>Parent<

  • Packaging material showing on delivery note

    Hi Sap Gurus, Could any one help me out in this issue on Packaging material number showing on delivery note. determination is based on masterdata Could any one help me out in this issue Thanks and Regards Edward

  • Is any SMTP server included in the Application Server

    Hi, My system is configured to send emails using an external SMTP server, however the initial configuration of it was using it's own IP (localhost). Since I'm new at SAP, I would like to know if by any chance there is already an SMTP server in the sy