Error message: incompatib​le image size when using IMAQ in image processing

I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

A couple things might be causing this problem-
1) The convolution matrix is bigger than 7x7, or
2) You have created an image, but there is not yet anything in the buffer
You can check number 2 by doing a winDraw window just before you do the convolution.

Similar Messages

  • Error message: incompatible image size when using IMAQ in image processing

    I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

    Hello,
    Which particular VI is outputting this error? Did you try larger border sizes (5,7)? What is the exact error code and error string?
    Regards,
    Yusuf C.
    Applications Engineering
    National Instruments

  • Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

    We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
    Here are some observations:
    1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
    2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
    We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
    In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
    But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
    How are others handling this?

    Please see the section "Handling Functional Errors" in the below link
    Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

  • X6 Adjusting image size when using a picture as ph...

    Hi All,
    I set a photo as my background on my X6, but the image re-sizes itself so its bigger in the home screen and not all of the image appears on the screen, alot is cut off.
    I cant quite figure out how to adjust the image so that it stays the same size when its used as my back ground, or how to re-adjust the image back! Its annoying because it means my pictures are limited as to what can be on my background, im having to chose really far away shots becaus they appear close up when used as a background!
    Help for the thicko much appreicated!!

    Transfer picture to computer and assuming you have windows, right click on it and select edit, when the screen opens in 'paint' select the re-size option , top left hand corner second section from the left when edit menu opens click the pixel option and type in the ratio of your phone screen (360x640), then close and save as jpeg, should then do exactly what you want 
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Error message "Enter a cust numb" when using BAPIBUSISM007_CREATEFROMDATA

    Hello,
    We would like to create Business Partner (SAP-BP module) with the standard SAP BAPI "BAPIBUSISM007_CREATEFROMDATA", but we always got the message:
    Type A
    ID: R11
    Mess: "Enter at least one number for the business partner"
    Even if we create have a partner group 0002 to assign external partner number and we enter a number in the field external partner number:
    Exemple:
    PARTNERGROUP                    0002
    BUSINESSPARTNEREXTERN           7000173  -> number which does not exist in BUT000.
    Does someone have already got this message and knows how to solve this issue ?
    Thanks a lot,
    Maxime
    Edited by: Maxime  VALLEE on Dec 22, 2008 4:30 PM

    Hi,
    In fact this link below is not for Business partner but martgage loan which is not what I am looking for.
    I would like to create in mass business partner with the standard BAPI :
    BAPIBUSISM007_CREATEFROMDATA
    It seems that this BAPI is not able to create business partner, but the BAPI "BAPI_BUPA_FS_CREATE_FROM_DATA2" works... The only issue is that the latter BAPI does not enable us to create Sales view and vendor view on the business partner.
    Thanks in advance if you have a clue or a solution...
    MV

  • I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs.  Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12.  A number of slightly different solutions have been reported (though all of a similar nature).
    Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected.  Without this you won't see the AppData folder in C:\Users\username\
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this doesn't work:
    In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following file:iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
    If this one didn't work:
    Exit iTunes
    Check the following folders:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
    Delete any copies of the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
    Exit iTunes
    In Windows, select Start > Control Panel > Programs and Features.  Find the entry for iTunes, right-click and select Repair.
    When this process has finished, restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself.  If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

  • I'm getting an error message on my time machine backup: "The backup disk image "/Volumes/Data/MacBook.sparsebundle" is already in use." Any suggestions?

    I'm getting an error message on my time machine backup: "The backup disk image “/Volumes/Data/MacBook.sparsebundle” is already in use." Any suggestions?

    Excellent apple networking on Lion or ML is usually the issue.
    Reboot the TC.. if that don't fix it.. reboot the whole network.. modem.. router.. TC.. clients.. restart in that order.
    There are tools.. download the real tool if you have lion..
    For ML you are stuck with toyland.. AU 6.1 .. good luck with the plastic hammer.
    Read C12 and C17
    http://pondini.org/TM/Troubleshooting.html

  • Error message "Pro.sparsebundle" is already in use when trying to back up computer

    My computer will not back up to Time Capsule and gives me the Error Message  pro.sparsebundle is already in use - how do I reset so I can back up

    Reboot the TC.
    Since there is no on/off button.. power off the TC at the wall or remove the power cable.. count to 10 slowly.. plug the power back in again.. voila. reset.

  • HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and  now im getting the error message as "PDP authentication failure" Im using Aircel carrier.

    HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and  now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
    Please let me know how to fix this issue

    update...
    I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
    Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
    I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
    At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
    Frustrated.

  • I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
    Cheers
    Guy

  • There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox.

     There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox in windows. how can I solve this problem?   if I use destop player like windows media player, no such error.
    would you please give some solution for this error? thanks!

    OS is window10, Metro APP is Xbox or MultiMedia 8; any video format will occur error only by following steps:  
    a. Put Audio / Media / Photo files into USB thumb disk or Micro SD card.
    b. Connect USB thumb disk / Micro SD Card  to Platform.
    c. Open 'File Explorer', click USB thumb disk.
    d. Open audio file with metro app: Music. / Open Media file with metro app: Video./Open Photo file with metro app.

  • The error message "Scratch disk is full" when trying to create

    the error message "Scratch disk is full" when trying to create a image/logo in Photoshop CS6

    Hi Weed42,
    This has been discussed in the following forum links:
    http://forums.adobe.com/thread/1164997
    http://forums.adobe.com/message/4968658
    Let us know if this helps,
    Regards
    Gurleen

  • Error message: "The media can't be used because you don't have access privileges, or because it has no content or is corrupt."

    I get the error message "The media can’t be used because you don’t have access privileges, or because it has no content or is corrupt." when I drag photos (or copy and paste photos) from iPhoto to Pages/Word.
    It never used to do this and is really quite annoying, as I now have to find the file through finder to drag from there.
    I had to rebuild the iPhoto library a few days ago, is it something to do with this?
    Thanks in advance.

    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, 
    navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Error Message: "The parameter is incorrect" when trying to modify SSLs

    Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
    What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
    If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
    Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
    (which is not what I need).
    This is very strange, because not only  until recently I was able to build Word documents and PDFs, but also my colleagues are able to
    produce them out of my source.
    Even the old projects, that I was able to build, now I cannot.
    I do not have any problem in generating CHMs.
    Until now I have tried everything I found in the forum:
    I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
    http://forums.adobe.com/thread/120022
    I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
    http://forums.adobe.com/thread/598335
    I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
    http://forums.adobe.com/thread/870339
    I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
    My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
    My Microsoft Office is 2010.
    Can somebody please help me? Did someone have the same problem?
    Thanks in advance.

    Hi there
    I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
    Often you need administrator rights to properly install things.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

    I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

    Hi!
    I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    It allows you to download it offline, which is what I used.
    Hope I was help!
    -Haroon

Maybe you are looking for