Error message - "Overlapping validity areas were found for country BR"

Hi Experts,
For a certain output type Y953 (e.g. for the shipment 2002355665 related to the DN 3087912658), an error message "Overlapping validity areas were found for country BR" is coming in as error.
The error message is appearing during the idoc processing of the shipment.
This is an incident of Dangerous Goods.
I would like to know if it is technically / functionally possible to find out as to why exactly this mesage is coming and how can we rectify the problem.
From technical point of view we checked that this message was not being called in the SAP system but was dynamically called.
kindly let me know of any breakthrough as this issue is critical as dangerous goods are being transported without needed documents printed.
Thanks in advance.
RIttik

Check whether note 836139 helps you.
thanks
G. Lakshmipathi

Similar Messages

  • Weblogic Portal: Error While Deploying: VALIDATION PROBLEMS WERE FOUND

    Hello friends
    I am getting following error while deploying EAR on server.
    “Module named 'MyEAR' failed to deploy. See Error Log view for more detail.”
    Steps I followed:
    1: Created one portal domain successfully and was able to start the serve after thatr.
    2: Created one Portal EAR Project and added it on server.
    Now when I am restarting the server, getting following error/log
    **“weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND**
    **problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>”**
    Exception stack Trace:
    java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
    at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper$DeploymentProgressListener.watch(WlsJ2EEDeploymentHelper.java:1566)
    at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:470)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1346)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:803)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:623)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:516)
    at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:708)
    at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:2690)
    at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:272)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    Caused by: weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
    at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
    at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
    at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
    at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
    at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
    at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
    at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
    at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:245)
    at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:231)
    at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:155)
    at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
    at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:301)
    at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:178)
    as it is ‘brand new ‘ – IDE generated application, weblogic-application.xml is untouched.
    Thanks & Regards

    I have seen this problem also. To be clear, this occurs straight out of the box. In other words - launch eclipse, create a new workspace, create a new portal EAR project with the wizard, and then try to deploy it without touching anything. In fact, try changing the portal's facets to anything, plain EAR, 11g default, Portal EAR - it doesn't matter. It will not deploy. Either you get this error or you get deployment errors complaining about missing library references in the weblogic-application.xml. Then - you have to do surgery just to get an 'out of the box' portal to run. Very frustrating.

  • Lync Topology fails with error (Mutliple Entries were found for type "ms_RTC-SIP-EdgeProxy")

    Hello everyone,
    After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
    First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
    I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
    among them.
    Could anyone advise where to look? I'm posting the error as well below
    Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
    ▼ Details
    └ Type: InvalidDataException
    └ ▼ Stack Trace
        └  
    at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
    at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
    at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
    at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
    2/19/2014 12:25:28 PM
    Error
     └ 
    Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
    Mohammed JH

    Hi,
    Glad to hear you have solved the issue and shared the train of thought.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

    I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

    Hi islandschool,
    Please try the suggestion given in the link:- http://helpx.adobe.com/creative-suite/kb/unable-validate-serial-number-ccm.html
    Regards,
    Sarika

  • Groovy expression for error message in validation

    hi...
    using groovy expression i want to display a dynamic error message...(ie.i have a date field the date cant be a past date..if i enter the past date like (02-04-2012 )the error message should display with this date)

    For a validation rule on an entity attribute, you can use a Groovy expression to decide whether
    an error or a warning message should be displayed using the following expression:
    adf.error.raise("THIS_IS_AN_ERROR_MESSAGE")
    adf.error.warn("THIS_IS_A_WARNING_MESSAGE")
    In your case, you can customize the message and access the date attribute in the message as source.HireDate(Assuming HireDate is the date attribute)
    Hope it helps.

  • Payment Program - Error FZ570 "No valid house bank found"

    I am using SAP ECC 6.0 and am getting an error message FZ 570 "No valid house bank found" for a single house bank when cash concentration is performed (trans FFWR).  All other house banks are OK.
    Can anyone tell me specifically what is causing this error?  I have checked all the configuration tables for this house bank and it all seems fine.  I really don't want to debug F110 to determine what is causing this problem. 
    Note:  This house bank shows up as an exception on the Payment List as error 070 but it is really FZ570.
    Thanks for the help.

    Hi Joanne,
         I think you can get a better response in the ABAP or FI Functional forums.
    Best Regards,
    Ravi

  • F110 - No valid payment method found for Customer Direct Debits

    Hi All,
    I am running customer Direct debit pre-notifications payment run via F110.
    I am runnnig only for one customer and it appears as an exception with the message 'No valid payment method found
    We have used payment method D lots of times before so it is nothnig to do with the company code or payment method set up.
    It is however the first we've tried to run for this customer.
    I have checked everything I know:
    1) Payment method D selected in the F110 parameters
    2) Payment method D entered in the invoice line item
    3) Payment method D entered in the payment transactions tab on the customer master data
    4) Valid Direct Debit madate exists and check complete
    5) parameters are correct in the F110 selection - company code, payment method, dates, next payment date, invoice is well overdue, it was only entered today but was due back in 2014!, free selection, additional log etc.
    6_ Checked in SPRO in "Payment Method/Country" details and the following are required : Bank details including IBAN required, SWIFT code required, SEPA mandate required. These are all maintained in the customer master data.
    and still the customer invoice I want to pay is show as an exception in the log. In the payment proposal it shows as an exception No valid payment method found. In the log it shows as
    Customer/vendor does not have any allowed bank details Message class FZ Message no. 651
    No permitted payment method exists Message class FZ Message No. 608
    Information re. customer 131275 / paying company code N120 ... Message class FZ Message no. 306
    ... payment not possible because of reported error Message class FZ Message no. 311
    I am at a loss as to where to check next. Please help.
    thanks
    Jemma

    Hi Jenna,
    In the log I can see the message 'SEPA mandate & for bank xxx has been assigned to a contract' FZ788. This means: Mandates with contract cannot be used for the payment of any invoice. The invoice has to be assigned to the mandate or be assigned in the payment run.
    Please check the F1-help of the field 'SEPA Mandate: Contract Type' in the mandate.
    The Note http://service.sap.com/sap/support/notes/1874892 describes the various options.
    Regards,
    Emőke

  • No operand values were found for operand MET_KVAT2C

    Hi,
    I am getting following error while doing billing,
    pls help....
    No operand values were found for operand MET_KVAT2C
    Message no. AJ013
    Diagnosis
    No operand value was found for operand MET_KVAT2C for the period 03.06.2009 -- 24.06.2009.
    Procedure
    Assign a value to the operand in the conditions, rate category facts or installation facts.
    (Note: Additional information regarding this error can be found in the details for this message.)
    Regards,
    Chetan

    Hi Rajesh,
    I Checked the registers , there are 10 register of which 4 for demand.
    Here DEMAND14 is used for taking the readings from the registers and then converting it to the normal operand
    Below is the part of schema :
    DEMAND09     01     MET_KVA          FACTOR100%          MET_KVAT2A
    DEMAND14     01     MET_KVAT2A               MET_KVAT2A
    DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2C
    DEMAND14     01     MET_KVAT2C               MET_KVAT2C
    DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2D
    DEMAND14     01     MET_KVAT2D               MET_KVAT2D
    DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2B
    DEMAND07     01     MET_KVAT2B     MET_KVAT2C          MAX_KVA2
    DEMAND07     01     MAX_KVA2     MET_KVAT2D          MAX_KVA2
    The meter reading results ar maintained. also i maintained MET_KVAT2C value at rate category level. in this case the system found the value but then it is not geting value for  MAX_KVA2.
    I suppose this value should be passed from meter reading.
    Also can you pls tell me what is Assign a value to the operand in the conditions in the error.
    Regards,
    Chetan

  • No operand values were found for operand EQPRICEIN1

    Hi,
    I am getting following error while doing billing,
    plz help....
    No operand values were found for operand EQPRICEIN1
    Message No. AJ013
    Diagnosis
    No operand value was found for operand EQPRICEIN1 for the period 30.04.2015 -- 31.05.2015.
    Procedure
    Assign a value to the operand in the conditions, rate category facts or installation facts.
    (Note: Additional information regarding this error can be found in the details for this message.)

    Hi Kailash,
    You are getting this error because the billing schema is calling variant EQPRICEIN1 for a calculation purpose and it is not being found.
    You need to check at the Installation where this operand is maintained (at the rate, rate category or Installation fact) and maintain a value for the period that is not being found. (30.04.2015 - 31.05.2015).
    Billing after making this update should solve your problem.
    Regards,
    Monis Shakeel

  • Validation Problems Were Found

    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
         at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:311)
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:174)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
         at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:72)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:88)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    .>
    <Aug 3, 2009 8:08:26 PM IST> <Error> <Deployer> <BEA-149605> <Failed to create App/Comp mbeans for AppDeploymentMBean IMEAR. Error - weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>.
    weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:189)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         Truncated. see log file for complete stacktrace
    weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         Truncated. see log file for complete stacktrace
    >
    <Aug 3, 2009 8:08:26 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249310306002' for task '0'. Error is: 'weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>'
    weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:189)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         Truncated. see log file for complete stacktrace
    weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         Truncated. see log file for complete stacktrace
    >
    <Aug 3, 2009 8:08:26 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'IMEAR'.>
    <Aug 3, 2009 8:08:26 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:189)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         Truncated. see log file for complete stacktrace
    weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         Truncated. see log file for complete stacktrace
    >
    <Aug 3, 2009 8:08:27 PM IST> <Error> <J2EE> <BEA-160197> <Unable to load descriptor C:\shared\views\w108198_infomgt-1_0_new\col-ts_infomgt\infomgt\.metadata\.plugins\org.eclipse.core.resources\.projects\IMEAR\beadep\im_domain\IMEAR/META-INF/application.xml of module IMEAR. The error is weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
         at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:311)
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:174)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
         at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:72)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:88)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    .>
    <Aug 3, 2009 8:08:27 PM IST> <Error> <Deployer> <BEA-149605> <Failed to create App/Comp mbeans for AppDeploymentMBean IMEAR. Error - weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>.
    weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:189)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         Truncated. see log file for complete stacktrace
    weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         Truncated. see log file for complete stacktrace
    >
    <Aug 3, 2009 8:08:27 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249310306940' for task '1'. Error is: 'weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>'
    weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:189)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         Truncated. see log file for complete stacktrace
    weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         Truncated. see log file for complete stacktrace
    >
    <Aug 3, 2009 8:08:27 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'IMEAR'.>
    <Aug 3, 2009 8:08:27 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:189)
         at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
         at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
         at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
         at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
         Truncated. see log file for complete stacktrace
    weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         Truncated. see log file for complete stacktrace
    >

    It generally helps to include a little more in a question besides just the stack trace. Was it clear to you that this is reporting a problem with your "application.xml" file? The contents of this file would be very useful information.
    The error message is saying that it expected to find a "module" element, and it didn't find it. Seeing as this is the principal element that is found in this file, I'm guessing you have almost nothing in this file.
    You can see the schema for this file at [http://java.sun.com/xml/ns/javaee/application_5.xsd] (this is for JEE 5. I'm not sure whether the WebLogic version you're using (you've given no indication what version you're using) supports JEE 4 or JEE 5).

  • I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

    I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
    I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue. 
    I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
    I have tried the other solutions on here with no luck. HELP please.
    Many Thanks.

    Progress Update.
    I made a back of what existing phtos and Videos I had on my Iplhone.  I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
    Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted) 
    Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
    Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
    As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio.  The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
    I then went to bed as the restore is a long process.  When I woke up the library had library had cleaned itself up.  Mysteriously the prcess had deleted the files missing the their thumbnails.
    This is very perculiar and bad behavior.
    I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
    Here are the lessons learned.
    DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
    DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
    DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store.  (I did both :-(

  • HT1923 Want to uninstall iTunes and reinstall. Unable to remove Bonjour and Apple folders. Error message that they are in use. iPodService.exe is not running.

    Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.

    " The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error Message : " No value could be determined for Customer Exit Variable "

    Hello BI Experts ,
    I have created a "ZYTD_PERIOD" Customer Exit Variable  Interval  Mandatory and ready for input check mark removed.
    The reference character is '0FISCPER' .
    I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
    So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
    ==================================================================
      case i_vnam.
                  WHEN 'ZYTD_PERIOD'.
                  IF I_STEP = 2.
                  LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
                  CLEAR L_S_RANGE.
                  L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
                  L_S_RANGE-LOW+4(3) = '001'.
                  L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
                  L_S_RANGE-SIGN = 'I'.
                  L_S_RANGE-OPT = 'BT'.
                  APPEND L_S_RANGE TO E_T_RANGE.
                  EXIT.
                  ENDLOOP.
                  ENDIF.
    ===================================================================
    After that I use this 'ZYTD_PERIOD' variable in the query .
    Also I have used the variable 0P_FPER in another structure.
    When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
    I am getting below error message ,
    *No value could be determined for variable ZYTDPERIOD*_
    Below is details of this Error message ,
    Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
    =======================================================================
    Diagnosis
    This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
    Termination message BRAIN 632 appears:
    Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
    System Response
    1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
    With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
    With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
    0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
    2. Cause of Error
    The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
    Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
    Application CO:
    Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
    Application FI:
    Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
    Procedure
    Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
    Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
    =====================================================================================
    Is there any special settings needed before writing BEx Customer Exit ?
    I have already created a project in CMOD and assinged a proper RSR00001
    and EXIT_SAPLRRS0_001 and project is active.
    Any help please ....
    Regards ,
    Amol

    My Code is as below ,
              case i_vnam.
                  WHEN 'ZYTD_PERIOD'.
                  IF I_STEP = 2.
                  LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
                  CLEAR L_S_RANGE.
                  L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
                  L_S_RANGE-LOW+4(3) = '001'.
                  L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
                  L_S_RANGE-SIGN = 'I'.
                  L_S_RANGE-OPT = 'BT'.
                  APPEND L_S_RANGE TO E_T_RANGE.
                  EXIT.
                  ENDLOOP.
                  ENDIF.
                  ENDCASE.

  • I am unable to sync my ipad..i get error message " required file cannot be found" can someone help?

    I am unable to sync my ipad..i get error message " required file cannot be found" Can you help me?

    Some things to try in this order:
    1) Make sure you designated the correct folders for music, etc.
    2) Press and Hold the Home and Power buttons on the iPad until the Apple Logo appears, about 10 seconds.
    3) Make sure all antivirus and firewalls are off.
    4) Delete and reinstall itunes. (Back up the itunes folder first.)
    Hope this helps...

Maybe you are looking for