Error Message type ARTMAS belongs to BAPI in BD64?

Hi,
when i want to send ARTICLES using ARTMAS Message Type in BD64 ( Customer Distribution Model ) it shows an error message like below
" Message type ARTMAS belongs to BAPI
RetailMaterial.Clone: Use the BAPI in the model "
but i want use ARTMAS Message Type in BD64.
Please can anyone tell me how solve this issue.

I found the sloution.
First, for our distribution model we add message type still is "MATMAS", and then we should add BAPI as fllow:
Obj. name/interface: BUS1001001
Method: Clone
We can find these information from table TBDBE.
Try BD10, it can work.
I hope it can help other people.

Similar Messages

Error message type V1212.

Error message type V1212.
Please tell me the TCODE where I can see the Error or warnning assigned to this message

Dear rajsuhas
Go to SE91, input V1 in "Message class" and 212 in "Number" and execute.
Now block the first line and press "CntrlShiftF3", check only for "Programe" and execute. Double click on the blank field under the tab "short description". You can see the codings written there but you are not suppose to change anything there
thanks
G. Lakshmipathi

Error message type M7093-While posting to Cost center

Hi All,
While posting the material to cost center in MB21 201 movement i am getting the following error message :
Fld selectn for mvmt type / acct (G/L accnt no) differs for Business Area
Message No M7093
Please help me.
I am not able to post this document.
Regards,
Nagaraj S

Hi
Check the field status group assigned to GL account in FS00 and check its assignments in OBC4.
Also check mvt type settings in OMJJ transaction - 201 mvt - field selelction - additional account assignment (here business area is optional.)
You need to change either of them. Take help of FI consultant.
Thanks

IDoc transfer error - Message Type Conversion

Hi,
While trying to transfer an IDocs from a 46C system, i get the following STATUS message in transaction BD87
Message type RPM_TIME could not be converted
Message no. EA 694
Diagnosis
Conversion entry between long and short names missing.
System Response
IDoc cannot be processed without this entry.
Procedure
Create an appropriate entry for logical message RPM_TIME.
Could you anyone let me know the reason as to why it occurs.
Regards,
Roshith

The problem is the FM for that action is trying to use a material movement to make the transfer. You can't use standard material movements to transfer into QI once you have activated any of the materials inspection types.
What inspection lot is generated by your current action box? I'm guessing an 89. I can't remember.
Have an ABAP'er trace the FM and determine how it is doing the stock transfer. If it is using a 322 it won't work with QM active. You will have to have you ABAP'er modify it to use a 311 or 411 which will then use the 08 inspection type. I suggest you use a copy of 411 or 311 for this.
Craig

It is possible to change any warning message type to error message type?

Dear All,
Kindly do your need full efforts to solve this problem;
For T code iw32, material avaibility checks works but it gives warning message as per error message required at this point.
It is possible to change that message 281 i.e. Order & has missing parts to an error message rather than a warning message.
Kindly provide your valueable suggestions regarding it.
Do tell about any badi or echancement spot or user exits where error message can be incooperated.
Thanks in advance.
Regards,
MAA

Dear Rohan,
Problem not facing problem due to any code, i think u r not getting wht i am saying.
Let me explain in detail.
While creating order from t code iw31, material avability checks works and it is working fine and generating a warning mess in case of out of stock case. Requirement is to transform that warning mess to error mess.
Just need to know how can i change standard warning mess to error mess so that error mess displays in place of that warning mess.
Kindly suggest its solution for it .
For any query free feel to contact.
Thanks.
Regards,
MAA

Getting error message while creating Contract through BAPI

Hi
I am getting a 'Specify either address number or address handle' message while creating contract from BAPI BAPI_CONTRACT_CREATEFROMDATA. Can someone please tell me what can be the cause.

Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai

VF04 - error message types

Good Afternoon all,
hopefully i have posted this question in the right section..
i am trying to comply a list of all the error codes with in the VF04 Function, and was wondering if there is an easier way of getting this information, as currenly i am having to run the report, then go onto each order, to find the code, and the reason, and then log it down.
if there is away of finding this with in SAP, or does anyone here have a list they could show me.
your help will be greatfully recieved
regards
Jonathan

Let me start with saying that this requirement is, well, stupid. Even if it was possible to find all possible error messages, 99% of the errors most likely would not even apply to your business.
Technically, if you've gotten to billing (VF04), there should be no errors at all at that point. I would rather concentrate on refining the process, configuration, etc. to prevent any error, than trying to figure out all "what ifs".
If you still would like to oursue this meaningless, in my opinion, task, you might want to look at the message class VF in SE91 transaction. Also, you can try searching for MESSAGE command in the main billing program and all sub-programs. Good luck with that.

Error Message types

Hi All,
I have used "Message e000(38) with 'Please Enter valid No'." , Once entered wrong parameter value it used to exit and not again going to selection screen for value reenter. which error messae will go to selection screen again once entered wrong value.

Try syntax:
MESSAGE ID .. TYPE 'S' NUMBER .. DISPLAY LIKE 'E'

Change pointer in IDOC message-type ARTMAS, for field MARA-LVORM

Hi,
When changing the description of a material in MM02 I am able to sent an idoc using BD21. As this relevant for a change pointer. But when field MARA-LVORM (deletion flag at client level) is chosen, I can not sent an idoc with bd21. How can I make this happen?
thanks.

Hi,
Sorry I interpreted your question in wrong way. Solution I gave was for following requirement.
Every time a material is created or changed a change pointer is created, which serves as a signal for generating IDocs to dependent systems. However, change of material type creates a change pointer that doesn't trigger an IDoc.The purpose is to create the change pointers and send the idocs. Eg. Material type field. As per your reply above I guess change pointer created for LVORM is enough to send the idocs.
KR Jaideep,

TRADINGCONTRACT01 Message type

I am trying to configure ALE for outbound (from SAP) processing for IDOC basic type TRADINGCONTRACT01. I thought TRADINGCONTRACT was the message type. However, when I go to set up my distribution model I get this message when I go to add message type:
Message type TRADINGCONTRACT belongs to BAPI
TradingContract.Create: Use the BAPI in the model
Any ideas? Perhaps my config is off somewhere else.

Message type TRADINGCONTRACT is also used in the BAPI for tradingcontract (see details below) and apparently you can't have both. If you want to use the idoc interface, then i suggest that you create a new message type (e.g. ZTRADINGCNTR) and link it to idoc type TRADINGCONTRACT 01. You can do this via transactions WE81 and WE82.
Bapi definition
Method               Create
Business object      TradingContract    / BUS2124
Short description    Create from Template Data
New in Release       46C
Function module      BAPI_TRADINGCONTRACT_CREATE
ALE message type     TRADINGCONTRACT

Error message handling in BAPI...

Hi Guys,
I am working on documentation of a BAPI used SAP insurance module. Now I want to see all the error messages associated/ handled in that BAPI. How can I do that ? Is there a table in data dictionary where I can see error messages handled by a given Function module/ BAPI?
Any inputs will be highly appreciated.
Thanks.
Regards,
Tushar.

Hi,
here´s one possible solution:
CALL FUNCTION 'MESSAGES_INITIALIZE'.
LOOP AT it_return_bapi.
    CALL FUNCTION 'MESSAGE_STORE'
         EXPORTING
              arbgb          = it_return_bapi-id
              exception_if_not_active = ' '
              msgty                = it_return_bapi-type
              msgv1          = it_return_bapi-message_v1
              msgv2          = it_return_bapi-message_v2
              msgv3          = it_return_bapi-message_v3
              msgv4          = it_return_bapi-message_v4
              txtnr          = it_return_bapi-number
              zeile          = ' '
         EXCEPTIONS
              message_type_not_valid = 1
              not_active              = 2
              OTHERS                  = 3.
ENDLOOP.
CALL FUNCTION 'MESSAGES_STOP'
       EXCEPTIONS
            a_message = 04
            e_message = 03
            i_message = 02
            w_message = 01.
IF NOT sy-subrc IS INITIAL.
    CALL FUNCTION 'MESSAGES_SHOW'
         EXPORTING
              i_use_grid         = 'X'
              i_amodal_window    = i_amodal_window
         EXCEPTIONS
              inconsistent_range = 1
              no_messages        = 2
              OTHERS             = 3.
ENDIF.
ENDFUNCTION.
Best regards

ALE with BAPI; No recipient found for message type

We have to send sales activities from an ECC-system to CRM and tried to do this with message type SFADPSA and Idoc SFADPSA01.
When adding this message type to the distribution model (transaction BD64) we got the SAP-message to use a BAPI instead: IF1037SR with method RECEIVEPARTNERSALESACTIVITY. So we did.
To trigger the Idoc, we customized an output type, with transmission medium ALE, program RSNASTED and processing ALE_PROCESSING.
When processing the output type we get an error B1 129: "No recipient found for message type SFADPSA in the ALE model".
Analysing the error I found out following: during processing (RSNASTED, ALE_PROCESSING) function module MMODEL_INT_VALID_GET is called. This FM only looks into table TBD05, in which no entry for message type SFADPSA is found.
However, also function module BMODEL_INT_VALID_GET exist, searching table TBD06.
This table does contain an entry for the above BAPI and method and would not lead to an error message.
Obviously this last FM should be called, but this never happened...
Has anyone a clue?
Do we use the correct processing code?
Another message type to use could be SFADSACTIVITY, but this message type has no Idoc type assigned.

Hello Wolf,
This error message come while determing the distribution channel.
This error come from one of below includes. Can you please put a break point and swich update debugging on and check whether the program is populating reuqired parameters to determine the distribution model. by doing this you can understand what is going wrong....
LBDMOU17
PCHEAF01
PCITEF01
RBDSECOP
RBDSEGLM
if you are not able to check this let us know..
Regards
Naresh

Trigger inbound BAPI IDOC for message type ACC_GL_POSTING

I configured our SAP system for inbound GL postings -- message Type ACC_GL_POSTING process code BAPI. I successfully tested all the configuration pieces using WE19.
So how do I trigger the inbound process from my external non-SAP system. I would prefer not create a flat file that is passed by calling EDI_DATA_INCOMING. I also do not want to use BAPI_ACC_GL_POSTING_POST. So what RFC enable FM can I call to pass data and trigger the IDOC generation and processing? Is there anything standard?

I will use the standard RFC enabled function module IDOC_INBOUND_SYNCHRONOUS. No custom abap development will be needed.
Message was edited by:
David F

Error message when doing SUBMIT

Hello there,
i am just working on BSP pages that call ABAP Reports with "Submit" and display the Results within the BSP.
My Problem now is that some reports may come up with an Error message (type 'E') that stops the report and the processing of the BSP Page. The page displays then a "500 internal SAP Error".
I found a good weblog here: /people/mark.finnern/blog/2003/09/16/bsp-in-depth-message-statement-handling but also to encapsulate the Submit by a function call does not help here. The page stops when calling the submit.
Is it somehow possible to prevent the BSP-Page from terminating and catch the error message from the Report? I can not modify the Reports that are called.
Thanks for any help,
Stefan
6.20 SP49

Hi Stefan,
If your report returns the error message or message id, you could pass this on as an export parameter in your wrapping function back to your BSP event.
To display the error message on the same BSP page, include the following code in the event where err_msg is the error message from your report passed on to the function:
page->messages->add_message(
condition = 'REPORTERROR'
message = err_msg
severity = page->messages->CO_SEVERITY_ERROR ).
In the layout of the BSP page include the following code where you want the error message to be displayed:
<font color="red"><%= page->messages->assert_message( 'REPORTERROR' ) %></font>
Make sure the condition has exactly the same name in the event and the layout.
Additionally you could also use the SY-SUBRC after your SUBMIT statement and display a generic message for an internal error if the SUBMIT statement itself fails.
Regards,
Rohini.

ERROR MESSAGES IN MODULE POOL

hi experts,
i ve a query.
say i am getting an error messages in modulepool, u all knw that if an eeror occurd flow halt in that particular screen
nw hw can i get exit from transaction without using, chain-endchain, at exit command, leave prog etc
plz help, thnx in advance

hi,
if you are writing message statement with type 'E' the write the message statement with type 'S' display like 'E'. this will display the status messgae as error message and the flow will continue........
" for ex.
" if you write....
MESSAGE 'ERROR MESSAGE' TYPE 'E'.
" THEN CHANGE IT TO.....
MESSAGE 'ERROR MESSAGE' TYPE 'S' DISPLAY LIKE 'E'.
Regards,
Siddarth

Error Message type ARTMAS belongs to BAPI in BD64?

Similar Messages

Maybe you are looking for