Error message while displaying a Workbook in Portal
Hello,
We have a Workbook with 5 Queries in ech sheet. When we open the Query from Portal it displays the error message that
1. Query was changed! Characterisitc no longer exists
2. Invalid filter on CUST_SD: Filter changed
I opned the Workbook directly from Analyzer and it did not display the error message.
Thus it seems to be a change required in Portal side or may be some property of the Workbook.
Please let me know your opinion to fix the error.
Regards,
Nitin S.
Can you define "sometimes" a bit more?
Is it after a number of runs of a report?
Is it on a particular report?
Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
Can you duplicate the issue if you isolate the report to a new test app?
Did you happen to notice if the issue existed prior to FP 3.5?
Is this on your dev computer or a client computer?
OS?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Similar Messages
-
No Authorization Error message while displaying plan data in the layout
I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
Can somebody please let me know if I am missing something?
Thanks for your help.
LathaHi Latha,
Run transaction RSSM, go to authorization check log, enter your user. Try execute the BPS layout again, and get the error message.
Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
Hope this helps,
Frank -
No error message is displayed while deleting an attendee from a course.
Hi Experts,
Mu customer is facing problem while trying to delete an attendee from a course under Training and event management. The path he is following is right:
1) In PSV1(Dynamic Attendance Menu)the employee is seen firmly booked in
a course.
2)Right-click on his name and select cancel
3)Click the dustbin to remove
But nothing is happening, neither the employee is getting moved from the course nor any error message is displaying giving us any indication of what can go wrong. Can you please suggest what can be the possible problem?
Strangest thing is, this problem is occuring only for one employee.
Thanks and Regards,
ToaHi Manoj,
Thanks for your reply.
That is the problem, no error message is showing. When the delete button is pressed, neither the attendee is getting deleted nor any error message is displaying as of why the deletion is not occuring.
FYI: The employee is not locked.
Thanks,
Toa -
Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
endHi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps -
Error message while creating Appropriation Request
Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors RAISE_EXCEPTION
Date and Time 18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
condition "ERROR_IN_STATUS".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLAIA_TOOL
Include LAIA_TOOLU11
Row 119
Module type (FUNCTION)
Module Name AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 * TYPE = SY-MSGTY
90 * CL = SY-MSGID
91 * NUMBER = SY-MSGNO
92 * PAR1 = SY-MSGV1
93 * PAR2 = SY-MSGV2
94 * PAR3 = SY-MSGV3
95 * PAR4 = SY-MSGV4
96 * IMPORTING
97 * RETURN = ls_return.
98 * endif.
99 * if not ls_return is initial.
100 * append ls_return to return.
101 * raise error_in_status.
102 * endif.
103 *
104 * Füllen der Ausgabetabellen
105 perform fill_output_tables tables lt_status
106 lt_jsto
107 et_appreq_status
108 et_appreqvarnt_status
109 et_appreq_user_status
110 et_appreqvarnt_user_status
111 lt_objnr
112 lt_objnr_varnt
113 lt_return
114 using i_language
115 i_with_text.
116
117 if not lt_return[] is initial.
118 append lines of lt_return to return.
>>>>> raise error_in_status.
120 endif.
121
122
123 ENDFUNCTION.Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
Error message while shipping restricted batches
I am trying to get an error message while picking a batch in restricted status.
I have done the following:
1. Set up batch determination at shipping : Condition table set up at the Sales Org. level. Access sequence set up, Batch Search Procedure setup .....
2. Set up an error message in OVM1 for message VL 215
3. Set up condition records in VCH2 for the Sales Org level with indicator N. This is to ensure sending of batch search strategy to EWM.
When I create an outbound delivery for a 3 PL in ECC and enter a restricted batch in the outbound delivery I get no error message. In fact I can do the PGI of the outbound delivery as well.
Can you please tell me how to get an error message for this scenario.
ThanksJust found SAP is checking with the requirements date.
Anyhow click the batch split button in your delivery, and then the display batch determination
In that screen you will see 3 buttons with a paper icon, one for strategy analysis which is able to show you whether an condition record could be found and via which access sequence.
then a button for the Determination Log where you can see the details of all 5 steps that are carried out in a batch determination. And finally the Availability check button which actually takes you the CO09. Here click the scope of check to see whether restricted use stock is customized as available. -
Error message while syncing contacts with windows address book
getting error message while syncing contacts from windows address book cradsstring something
Hello,
The complete and exact error message is always more helpful than some small snippet something. Please provide that, and maybe we can make some better guesses for you.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error messages are displayed when opening the RTV form.
Hi All,
While doing a return to vendor the following error messages are displayed.
1.Go to the Inventory Management --> Return to Vendor screen.
2. In Action Drop down select ‘New’ and click on OK
3. A series of errors are encountered.
4. A warning message as [640+49> 688] and then click ‘OK’.
5. Notice the error message”Multi view internal error: B_RTV_DETAIL.QTY_RETURNED:current_col_pos exceeds parameter defined maximum right position” and then click’ OK’.
Can any one help me out in these?
Thanks,
Sushanth.DThis is a coding issue in the form, maybe the number is too big for the box on the canvas.
It looks also like a business issue is kicking off the error, the message [640+49> 688] looks like some units of stock etc. check, e.g. the returned quantity is larger than the stock on hand.
File an SR with OracleSupport and/or open the UI's Form fmb code in Forms Developer.
Multi View relates to an (quite old) OracleRetail (Retek) Forms pll library that enhances the Forms features, if my memory is not letting me down.
Best regards,
Erik -
HI Experts,
Iam getting error " SAPHTML_E_CALL_METHOD_FAILED:" While displaying message payloads in SXMB_MONI.
Facing this problem for all the messages,Issue is in production system.
Cloud you please help me in in resolving this error.
Thanks in Advance,
Regards,
Seshu.KHi,
This seems like some Basis config issue. might be a problem in your MONI settings,
Go to SXMB_ADM and inside Integration Engine configuration
->add LOGGING and LOGGING_SYNC under category RUNTIME and give current value = 1 (active). Save it then.
Also check if sapgui version if the latest one. Maybe you can solve the problem by upgrading sapgui.
The following SAP notes might help: 1018948, 1072109
Regards,
Souvik -
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?
The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.
-
Hi,
I got a error message while creating PO.
"No short text maintained in language DE(Please re-maintain material)"
How to go with this?
RegardsHi,
check MMR language........
Or
use this path
SPRO-MM-Purachsing- Meassages-Define Texts for Purchase Order
Here maintaion text for Header and item for document item (EKKO,EKPO for ur doc type)and save.
Regards,
Biju K
Edited by: Bijay Kumar Barik on May 14, 2008 12:22 PM -
When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.
I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix? -
Unable to capture error message while creating an SO using bapi
Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar -
Bypass the error messages while opening the Web Analysis 9.3.1 Report
I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
ThanksKaren,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot
Maybe you are looking for
-
Can anyone help with problems syncing an ipod
Hi, can anyone help. I am really struggling to set up my ipod to itunes. I had previously had 2 ipods set up to one itunes account but when I got my laptop upgraded I lost everything. I don't think I ever had it set up correctly but it worked havi
-
Transferring EVERYTHING from one computer to another w/ same source
I want to transfer all my iTunes files (playlists, music, play counts, everything) from one computer to another, on account of the logic board of my old one is messed up and I want to get everything on my Mac Book Pro. HOWEVER. When I was using my ol
-
Hi Friends, I have a requirement to set up a batch job to run every 15 minutes to print some labels. The catch is that it has to run only on working days between 6:15 AM and 6:15 PM. I believe that we can schieve the working days part by giving the f
-
Is there any way to burn an Aperture 3 slideshow to a DVD?
-
Nearest Monday from a given date - how do I do this?
Hello: We have a requirement to find the nearest Monday from a given date. Can anyone help me with this query? Thanks!