Error message while doing returns in FP09

HI Experts,
I am getting an error message as No Free number range for document type AB. I checked the document number ranges and its not exhausted.
Could you please help me where I might have done wrong in configuration.

Hi Moin,
If you are sure that the number range has not been exhausted, then can you please check whether the number ranges for mass processing has been maintained or not in the following SPRO config-
IMG-->Financial Accounting-->Contract Accounts Receivable and Payable-->Basic Functions-->Postings and Documents-->Document-->Maintain Document Assignments--->Document Types-->Maintain Document Types and Assign Number Ranges
However, I still feel you check the number ranges for returns once before proceeding with the above.
Hope it helps...
Thanks,
Amlan

Similar Messages

Error Message while doing Order CLSD

Hi,
I am getting error message while doing Order CLSD...
Error Msg: Invalid cost element(XXXX) for reservation item 010.
please suggest me...how to solve this issue.
regards,
Venkatesan Anandan

Hi Venkatesan,
I had replied and asked for one clarrification and to check same at your end.
Is your Cost Element mapping done with cost cost center used in order settlement rule.
Also check for Material Master Change document for Valuation Class change and revert back in this thread.

Error message while doing MIGO.

Hi,
I am getting error message while doing MIGO. Can some one help me out in this issue.
Consolidated companies 0 and 5686 are different
Message no. F5 080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
Thanks in Advance,
Subhajo

Check Fi customizing in OBA7.
As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
Within WE you must not have selected the field inter-company posting .
Best you place the cursor into this field and press F1 for detailed explanation,

Error message while doing delivery

I am getting an following message while doing delivery
Material 20000019 doesnot exist in storage location DLPT 2120
Storage location was deleted since material was not maintained correctly
No Schdule line is due for delibery upto the selected date
Please guide me with the solution.

Dear Sanjay,
First of all, I would like to suggest to check the "Organizational Level" data, with which Material was created in T. Code: MM01.
Check the "Plant", along with "Sales Org" and "Dist. Chnl" in T. Code: MM02
Also, check the "Strorage Location" in T. Code: MM02
Select the Views: Sales: General Plant data/storage location and then go to organizational elements and enter the plant and storage location, save it.
Also, on to the same screen up there, in Menu-Bar:
Enviornment --> Sock Overview
It will lead you to Screen: MMBE
Check Stock for the Material.
Best Regards,
Amit
Note: I am a bit confuse with your statement:
Storage location was deleted since material was not maintained correctly
Do you mean that, You have removed "Strorage Location - DLPT 2120" from the Material Master "20000019"?

Error message while doing PGI

HI Guys
I created Order and while doing PGI error message comes
Error message is:
Account 892000 requires an assignment to a CO object
Message no. KI235
Diagnosis
You have not defined a CO account assignment for an account that is relevant to cost accounting.
System Response
Account 892000 is defined as a cost element.
This means that you must always specify a CO account assignment.
Procedure
Enter one of the following CO account assignments
Order
Cost center / cost center/ activity type
Sales order item (for a project or cost relevant)
Project / WBS element
Cost object (Process manufacturing)
Network/ Network activities
Business process
Profitability segment
Real estate object
The posting row affected is 000, account 892000.
Help me in this issue ...as early as possible

Hello,
sales order items are not in all cases available as account assignment
object, this is only the case if it is an order with make-to-order
production (VBAP-KZVBR='E').
If the sales order item itself is a co-object (VBAP-KZVBR='E'), the
cost and revenues can be carried on the position itself and the field
VBAP-OBJNR contains the number of the co-object. Please check this for
your case.
Even if the VBAP-KZVBR is set to 'E', but if the field VBAP-OBJNR is
blank, the order cannot be the accounting object in KB21N - you should
rather use the receiving order for the activity allocation.
You can check this in KB21N via the F4-help: if the sales order item
is not displayed here, it's is not considered as valid account assigment
object.
I hope this information will help to clarify the issue.
Regards
Claudia

USER IS GETTING ERROR MESSAGE WHILE DOING PM ORDER COLLECTIVE CONFIRMATION

Dear,
i have query from my client that user is getting error message " no status object is available for cre o/o/o while doing pm order confirmation. My client is using sap MRS . I Recommend the client to run program ZKBEDREP in se38 and still they are facing the same error.Can any body help me in solving this.

Hi,
Please see if this thread helps
System status not avilable for one of the component - Conf. can't be done
Regards,

Error message while doing data migration

Hi all
When im doing data migration for material master through Z transaction ,it is updating global DIR documents for material while doing this ,im getting the error and the transaction is stopped intermediately the error message is CHANGE MASTER STATUS DOES NOT ALLOW CHANGES no error message number.
Kindly sujjest where is that error is coming,it would be very helpful

It seems you are using engineering change management and your change number's status is not proper (CC01, CC02, CC03; table AENR).
Configuration of the status is in T419S (use SM30 + T419S) - but I guess the problem is about your change number not about config...
How your Z-program is working, we don't know; contact the responsible functional/technical consultants.
Edited by: Csaba Szommer on Aug 19, 2011 8:41 AM

Error message while doing GRN

Dear Experts,
We are facing some "entern error" while doing MIGO of any PO. Also their is no message type and no. It's just say entern error.
Please guide us in this topic.
What I feel is someone has created this error message manually. So please guide us where do can we change this message into no message type.
Thanks and Regards
Raghav Puranik

Hi Raghav,
Please check it there is any user exist activated in your MIGO transaction. If you were coded any exit it will populate such a message.
Also, Let me know your message details,
Whether it is standard message or customized by business?
Please double click it on your error message and check it message application area..
Go to Transaction code SMOD - and deactivate your exit data if used anything.
Thanks,
Thiru

Error message while doing the Vendor Clearing

Dear Team,
I am encountering an issue while doing the Vendor clearing.I am nullifying the Vendor down payment against to RE document through residual posting system is showing the message like the below.
No additional posting to asset
Message no. AA 444
Diagnosis
A downpayment was already posted to the asset 80567 0 in the currently displayed document. Additional posting to the same asset in this document is not possible for technical reasons.
Procedure
Combine the two downpayments into one.
Please kindly advice.The concern Down payment is showing under open item in FBL1N.Kindly advice how to proceed further.
Thanks for the consideration.
Regards,
Suma.

Hi Suma,
First clear Down payment with using of F-54 & next you can clear normal OI.
Rgds
SumaMani

Error Message while doing F-51 (Post with Clearing)

Hi All,
We are getting an error message as "Consolidated companies " " & 009062 are diff" while executing F-51 (Post with Clearing).
While executing F-51 we are using the document type as KG.
Can you please let us know the possible reasons for such error message and how to overcome it.
Thanks in Advance..
Regards
Mayank

Hi Suma,
First clear Down payment with using of F-54 & next you can clear normal OI.
Rgds
SumaMani

WRT350N error message while doing Vista back-up

I have a hard drive attached to the USB port on this router. While attempting a backup from Vista, I get this error message: "cannot create a file when that file already exists."
I have a feeling that this is something not eaisly fixed. User has admin rights on both the Vista box and router and the user name and password for that user are the same on both.
Any help would be appreciated.
Dana

It might be something do with the User Permissiong, which you have created on your Router. Make sure you have given appropriate rights to the users which you have created on your Router.
Login to the Router setup page, Click on the Storage Tab, Below the storage tab you will find a sub tab "Administration" you will be able to see the users which you have created on your Router and their permissiong.
Again below the Storage tab you will see the sub tab "Disk" click on it and under the "Shared Folders" you will see the folders which you have created on your Disk, Click on Edit and under Access check the User and click on (>>) to give a user full rights and click on Save Settings.
Now on your computer, You need to Re-Map the network drive on your computer and now check if you are able to transfer the files on your Drive.

Throw a custom error message while doing CATS timesheet approval

Hi,
We are going to implement CATS Timesheet approval using ESS / MSS portal.
Requirement is NOT to allow an approver to approve / reject a timesheet workitem in MSS duing payroll block period ( e.g last week of a month). we need to throw an error message saying 'No approval of timesheet is allowed during payroll block period'.
Will SAP enhancement CATS0006 (EXIT_SAPLCATS_006) be useful for this?
Any other customer exit / Badi will help.
Regards,
Bijay

Hi,
yes you can use the mentioned CATS enhancement to throw the error message.
Check the link :-
http://help.sap.com/erp2005_ehp_05/helpdata/EN/bd/53fa2fcc43594dbf9f406c18989a47/frameset.htm
Thanks & Regards, Swapnil Mishra

PROJECT SYSTEM :No error message while doing TECO(TECHNICALLY COMPLETED)

When we do technically completed for an activity in PROJECT SYSTEM ,system should give an error message if there are any production order for which materials are yet to be received. Can any one tell me how to do it.

Hi,
I don't think standard SAP supports what you want to achieve.
Regards,
Paul

Error Message while doing Initialization of opening Stock in TS

Hello Gurus
The following Message coming while performing Initialization of opening Stock in Transfer Structure of 2LIS_03_BX using T-Code: MCNB.
What may be the problem.
Pl provide me the solution.
Thank in advance
regards
vijay

Hi Vijay,
If you want to init your stock from R/3, take a look to this doc...It's a must !
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0ea8a990-0201-0010-2796-fa9ae8691203
http://help.sap.com/saphelp_nw04/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/frameset.htm
Hope it helps!
Regards,
San!

Error while doing Return to vendor (122) against PO through QA11

While doing Return to vendor (122) against Purchase Order through QA11 we are getting the error as Deficit of PU GR quantity 20,000.000 TH: RPO1010 FCHN 007A.
Steps we are followed.
1. Created Purchase for Quantity 20 TH with activation of Unlimited Delivery.(TH Means UOM (Thousand)
2. GR has taken for 20,000 TH instead of 20 TH because of Unlimited Delivery as activated.
3. Usage decision as given total Quantity accepted based On Inspection Lot generated at MIGO.
4. Stock has come to Un-Restricted.
5. For Short fall of Purchase Order Quantity Increased the PO qty to 20,020.
6. For Return to vendor we transfer the stock from Un-restricted to Quality by MB1B Mvt type 322.
7. While Transfer Inspection Lot has generated.
8. Based on that Inspection Lot we try to do return to vendor through QA11 against the same Purchase Order.
While doing the Last step we are getting the above error.
Pls. Kindly look into this and tell me whether this steps are correct, if correct any settings needs to be done to over come the error or tell the Correct Logic to return the Material.
Thanks & Regards
Sathish
Ph:9940518715

My thoughts on this is that the original PO was for 20TH. therefore you will only be able to return 20TH against it regardless of what you receipted. This is because SAP copies from the original PO document for the return and not the GR material document.
You can try to edit the original PO and increase the amount to 20,020 and try again. But I don't think you'll be able to edit that since it was fully receipted.
Your probably going to have to do a return for 20TH and then a separate, stand-alone return for 20,000 TH.
Craig

Error message while doing returns in FP09

Similar Messages

Maybe you are looking for