Error messages while generating reports

I am using CR XI SP4 and i get the following message when generating reports:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt:
Unknown Database Connector Error---- Error code:-2147482942 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException  (Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.t.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
In the RAS log file i see:
ErrorLog 2009  7 21 17:45:16.188 732 3648 (\servers\ras\dtsagent\cdtsagent.cpp:3113): CDTSagent::doOneRequest reqId=250: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:13209 ErrorCode:706 ErrorMsg:"Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt: Unknown Database Connector Error"
Any assistance would be appreciated
Thanks

hi,
You are able to login in to application, Means your authentication is working.
Open RPD in online mode and try to view data.
Check your connection pool setting in General tab.
Check you have selected appropriate Data Source Name, Call Interface.
Thanks,
Sainath Baludu.

Similar Messages

  • Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

    I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
    An error occurred while generating report:
    Object reference not set to an instance of an object.
    Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
    those circumstances.
    I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

    > Since I have to go through Edit to see the settings, and peruse the
    > entire massive folder of settings to try to identify the bad one, it has
    > been slow-going and I haven't found it yet.
    You can filter ADM templates to show configured ones only, and you can
    use the "show all settings" node. This will speed the work up - a little
    bit at least :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

    Hello,
    As you can tell from the title of this question, I am no expert with GPO's.  Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb".  While
    I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already.  That is not necessarily my case and I would ask for a
    little patience and a bit of 'hand-holding' for what I need.
    I run SBS 2011, and in Group Policy Management I have a custom GPO.  In this GPO I define all my settings.  I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings.  This
    policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03.  That may be the issue, but before making any changes I am seeking expert advice.
    When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
    I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified.  I see that my option for the location is set to "Default"
    which by my guessing would be located in the C:\Windows\sysvol directory.  Below is what I see there:
    C:\Windows\sysvol\domain
    C:\Windows\sysvol\staging
    C:\Windows\sysvol\staging areas
    C:\Windows\sysvol\sysvol
    I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
    But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
    To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry.  I searched my server for
    that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
    If I am correct with my assumption and basic knowledge, I should move all objects as follows:
    -Move FROM: C:\Windows\sysvol\domain\policies
    -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether. 
    Thank you for anyone's help and time with assisting me with this request.
    John Fester

    > top "Settings" I see the error: "An error occurred while generating
    > report: Object reference not set to an instance of an object."
    That's due to a security setting (most possibly) your current OS does
    not understand. Hard to find out wich exact setting it is... To resolve
    this issue, we need the gtpptmpl.inf file residing in the policiy's
    sysvol folder. To open this folder, edit the policy, move to computer
    settings - policies - windows settings - scripts - startup, press "show
    files". Then move two folders upwards and back down to
    .\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
    its contents and we'll have a look at it.
    > location, which I speculate is: C:\Windows\sysvol\domain\policies (which
    > folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
    That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
    > all objects as follows:
    > -Move FROM: C:\Windows\sysvol\domain\policies
    > -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    No.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Number range interval doesnot exists - error message while generating numbe

    Hi Experts!,
                      I am getting error as " Number Range interval does not exists" while generating auto number for an custom defined tr cod
    The prg is as followos:
    INCLUDE MZFIRSTPAGETOP                          .    " global Data
    TABLES: ZCHP_CUST_INFO.
    DATA: OKCODE LIKE SY-UCOMM.
    DATA:   CNAME LIKE ZCHP_CUST_INFO-CREATED_BY,
            REQTYP LIKE ZCHP_CUST_INFO-REQUEST_TYPE,
            DESC LIKE ZCHP_CUST_INFO-SHORT_TEXT,
            PRIO_TYPE LIKE ZCHP_CUST_INFO-PRIORITY_TYPE,
            EFFECTIVE_DATE like ZCHP_CUST_INFO-REQUIRED_STR_DAT,
            COMM_TYP like ZCHP_CUST_INFO-MODE_OF_COMM,
            COMM like ZCHP_CUST_INFO-ADDRESS,
            REQ_NUM LIKE ZCHP_CUST_INFO-REQ_NUM.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'FOR1000'.
      SET TITLEBAR '1000'.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    INCLUDE MZFIRSTPAGEO01                          .  " PBO-Modules     *
    INCLUDE MZFIRSTPAGEI01                          .  " PAI-Modules     *
    INCLUDE MZFIRSTPAGEF01                          .  " FORM-Routines   *
    *&      Module  USER_COMMAND_1000  INPUT
          text
    MODULE USER_COMMAND_1000 INPUT.
    CASE SY-UCOMM.
      WHEN 'SUBMIT'.
    CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        NR_RANGE_NR                   = ' '
        OBJECT                        = 'ZREFNUM'
      QUANTITY                      = '1'
      SUBOBJECT                     = ' '
      TOYEAR                        = '0000'
      IGNORE_BUFFER                 = ' '
    IMPORTING
      NUMBER                        =
      QUANTITY                      =
      RETURNCODE                    =
    EXCEPTIONS
      INTERVAL_NOT_FOUND            = 1
      NUMBER_RANGE_NOT_INTERN       = 2
      OBJECT_NOT_FOUND              = 3
      QUANTITY_IS_0                 = 4
      QUANTITY_IS_NOT_1             = 5
      INTERVAL_OVERFLOW             = 6
      BUFFER_OVERFLOW               = 7
      OTHERS                        = 8
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
            ZCHP_CUST_INFO-REQ_NUM = REQ_NUM.
            ZCHP_CUST_INFO-CREATED_BY = CNAME.
            ZCHP_CUST_INFO-REQUEST_TYPE = REQTYP.
            ZCHP_CUST_INFO-PRIORITY_TYPE = PRIO_TYPE.
            ZCHP_CUST_INFO-SHORT_TEXT = DESC.
            ZCHP_CUST_INFO-CREATED_ON = EFFECTIVE_DATE.
            ZCHP_CUST_INFO-MODE_OF_COMM = COMM_TYP.
            ZCHP_CUST_INFO-ADDRESS = COMM.
    *ENDIF.
    INSERT ZCHP_CUST_INFO.
    COMMIT WORK.
    WHEN 'RESET'.
           CLEAR: CNAME,REQTYP,PRIO_TYPE,
    DESC,EFFECTIVE_DATE,COMM_TYP,COMM.
      WHEN 'CANCEL'.
            LEAVE PROGRAM.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1000  INPUT
    could any one help me out,.!!!
    Thanks in advance.
    Sunil
    [email protected]

    Hi,
    I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
    I hope this will make sense.
    Panneer

  • Getting an error message while generating smartform

    Hi,
      We transported 1 smartform from one system to another. Now at another system when I tried to test this form it is giving me an error message like 'Error during generation of form'. It was running fine at system1 but no idea why its not being generated here.
    Please help me out as soon as poosible.
    Regards,
    Shikha

    Hi,
    I think you have hardcoded the functiona module name as something
    call function '/1BCDWB/SF00000334'  in the driver progarm .
    it should not be hard coded .
    Use SSF_FUNCTION_MODULE_NAME instead to get the functiona module name during runtime.
    Regards,
    Guru
    mark if helpful

  • Error message while running reports. Reports are failing

    Does anyone knows what could be the reason for this error messages. We are using BOXI R2 with IIS. We are getting this message on the boxi processing server not on web server.We are getting this on al the three clustered processing servers. This has started happening recently else it was working perfectly till now.
    Thanks,
    ErrorLog 2009  4 14 12:12:41.263 9680 10848 (.\dts\corbaclientrequestcommadapter.cpp:424): EXCEPTION: IDL:omg.org/CORBA/UNKNOWN:1.0: Corba client dropped connection prematurely. reqType=103 agentId="{69B8A766-F098-4B17-B81B-020B8973E75F};1624;"
    ErrorLog 2009  4 14 12:17:32.316 9680 11956 (.\dts\corbaclientrequestcommadapter.cpp:419): CORBA communication failure: reason[error number WSAECONNRESET] minor[1330577409] reqType[128] agentId=["{69B8A766-F098-4B17-B81B-020B8973E75F};1620;"]
    ErrorLog 2009  4 14 12:17:32.316 9680 12164 (.\dts\corbaclientrequestcommadapter.cpp:419): CORBA communication failure: reason[error number WSAECONNRESET] minor[1330577409] reqType[280] agentId=["{69B8A766-F098-4B17-B81B-020B8973E75F};1622;"]

    We did multiple changes which I have mentioned in other thread. We used -port and -ns command line on each server. We have deifned CMS by IPAddress:6400 in command line.
    It seems to have resolved this issue.. When we do IPCONFIG on the server then we see 2 NIC cards ( 2 IP address). It seems that BO was confused to which one to use. So we hard coded the values of the NIC card ( IP address) in the command line of CMS and on all services.
    Thanks,

  • Error While generating Report

    Hi ,
    I am facing 1 problem while generating Report.
    I am trying to generate a report based on one Users global attribute.
    I have customized the USER UI CONFIG and Uer Report task to generate a report like this.
    I created a new report to generate report and in that report I have given the condition as that attribute equals to some value "true" / "False".
    But there are some users who has this attribute value as true and whose accounts are not properly created in a resource LDAP So this User view is containing some error.
    Hence when I try to run the newly created report as it tries to iterate on the user objects whose view is containg some errors ,the report is not properly getting generated and giving exception as error in calling the method getResourceobjects on LDAP.
    What can I do now ? What is the alternative for me? I want to generate the report on that attribute only.....
    It is very urgent for me and Can anyone please help me out....
    it would be so great if there is any immediate reponse for this.

    >
    ... ORA-00932: inconsistent datatypes: expected DATE got NUMBER ...
    >
    I believe the above error message is very descriptive.
    HTH
    Srini

  • An error occured while generating a new report template

    I have installed the Crystal Reports 2008 V2 and also the support pack. Installed the SAP Integration Kit XI 3.1 and the latest service pack 2.7. When I try to use the SAP Tool bar from Crystal Report , I can connect/see the queries but when I select any query to create a report I am getting an error message
    "An error occured while generating a new report template". Any advise ? How do I turn on the trace in the client ?
    Thanks,

    Hi,
    Did you update your Fix Pack...
    Here is solution for Client...
    To turn tracing on for client applications, you can use the following steps:
    1. Click Start > Settings > Control Panel > System > Advanced > Environment Variables button.
    2. Under the User Variables, add the following variable and value:
    For Enterprise XI:
    Variable Name: BOE_LOGGER_ENVIRONMENT
    Variable Value: -trace -loggingPath c:\logs
    For Crystal Analysis, Crystal Enterprise, and Crystal Reports version 10 and earlier:
    Variable Name: CRYSTAL_LOGGER_ENVIRONMENT
    Variable Value: -trace -loggingPath c:\logging
    Regards,
    Bashir Awan

  • Error while generating report in RAR

    Hello,
    We are getting error while generating reports in RAR.
    RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
    or cannot see details ,
    gives error cannt be displayed.
    Thanks,
    DK

    Hello,
    we had same issues, this happed because the disk was full.
    Please check with your basis team if the disk is full.
    Thanks,
    Prasant

  • Bypass the error messages while opening the Web Analysis 9.3.1 Report

    I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
    For example:
    user a has the meta-read and read access of @idescendants (east);
    user b has the meta-read and read access of @idescendants (west);
    user c has all the accesses
    However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
    Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
    Thanks

    Karen,
    Thanks for the reply.
    I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
    In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
    In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
    Do you think this multiple level combo boxes can be the cause of this error message?
    Thanks a lot

  • Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

    Hi all,
    I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
    "an error occurred while generating the report. the application will exit" and Certification tool just crushes
    I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
    Can't insert images into post because of not verified account so imgur:
    http://imgur.com/ptT0cU3

    Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
    Another member has same question.
    https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
    If you want to test your app, you can also send to beta store and you can get response from the testers.

  • FREC Error while Generating Reports in Quality Center

    Hi,
    We usually generate reports using Dashboard module of Quality Center . While generating reports on  a particular PC, we are getting the following error.
    The SQL Query <sheet1> has failed to run, with the following error:
    Returned Result is not valid FREC.
    We are able to generate the same report on a different PC.
    Does anyone encounter this issue earlier? Could someone help us out in solving this issue.

    Issue popped up with me a few times and seemingly uncontrolled.
    I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34))

  • Error message while creating or editing a report

    Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
    Crw32.exe has enconutered a problem and needs to close.
    Is there a patch available or what can we do?
    Thanks.

    Hi Lucus,
         This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again.  If you still get the error, I would call the support number, and let them help you out.   You may need to know,   the type of PC or server the software was installed on, the current os, available memory... etc    For now, I would go to windows (If that is what you are running ) and re-install or repair the software.

  • Error message while creating an inbound delivery to generate an idoc

    hi,
    i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
    ." No recipient could be determined for object BUS2015 method SAVEREPLICA"
    Procedure for System Administration
    The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
    need help
    regards
    leo

    Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
    Also sometimes search for OSS notes by the message class and number helps.

  • Receiving the error message while executing the Real Time DTP

    Hi,
    I am receiving the error message while executing the Real time DTP for Billing data.
    Error Message - Record filtered in advance as error records with the same key exist     RSM2     722
    When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
    Diagnosis
    The existing DTP requires a serialized update because fields are updated
    non-commutatively during the processing run (for example, MOVE).
    Therefore all new data records that have the same semantic key as
    incorrect records that have not yet been corrected in earlier requests
    or earlier data packages of the same request, are filtered out after the
    extraction in a special step. In this way the system ensures that
    incorrect data records are not repeated for your changes, which may not
    contain errors themselves.
    System Response
    The data record is not updated but is written to an error stack.
    Procedure
    Procedure
    Correct all incorrect data records and update them using an error DTP.
    Procedure for System Administration
    I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
    Regards,
    Ram

    Hi Arvindh,
    Its  write optimized DSO.. there is no option to generate SIDs.
    Hi Kiran,
    I checked the link u sent me. Here the main issue is..The function module is standard  and its not allowing me  to do enhancement  point..
    Any idea in using Badi's??
    Thanks all...

Maybe you are looking for