Error migrating Labview 7.1 scf file to Lavbiew DSC 8.20
Hello,
I am trying to migrate a small .scf file (in annex of this note) coming from the tag engine of Labview DSC 7.1 to Labview 8.20 but get plenty of error messages as showed in annex of this note. I have got the DSC 8.20 version of August 2006. The only tags that can migrate are the 4 default tags showed when tag engine 7.1 is opened the first time.
Thank you to help me solving this weird problem,
Christophe
Attachments:
ErrorMigratingSCF.jpg 199 KB
default.zip 2 KB
Chris,
Did you resolve the migration issue? If you did, how did you do it? It has to do with the I/O server.
Roy L. Costa
Email: [email protected]
Catalyst Test Engineer
General Motors Warren Tech Center (R & D)
Similar Messages
-
File permission error in LabVIEW, but what file?
I am in the process of smoothing out the wrinkles in a large LabVIEW program that I've converted from LV 7.0 to LV 2011SP1. I've also moved from WinXP to Windows 7. I get why there are file permission errors and I understand what the issues are in regard to moving from XP to 7. What I would really like, is for the error message to tell me WHAT file is having the issue. There are entirely too many file accesses in this program, I am not the originator, and it's been painful. A more explicit error message, a log file, or some other cool trick to find what file is having the issue would be super. While I'm asking for stuff, a call stack or at least the name of the VI this code calls would be wonderful, as nothing at all calls New File directly.
Certified LabVIEW Developer
NI-VLM AdministratorHow are you currently handling the error? The file you tried to access should be part of the string in the error cluster.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Error number 7 when LabView tries to open file
I get the following error when LabView tries to open a file -
" Error 7 occoured at Open File+.vipen File.
Possible reasons:
Labview: File not Found .
or
NI-488: Non-existent board.
Having searched through the archives here the error usually occurs when LabView cannot find the file. Well this time i know the file is there, i have even used the 'read from spreadsheet file' vi with the dialog box option to show LabView where the file is. When i copy just the open file code into another (blank) vi it runs correctly but in the middle of all my other code it kicks up this error. I ahve had the code working no problem before so this problem has just arose over the past week. Very frustrating.
Any help appreciat
edHi,
You need to check the full path that you are passing to the Open File+.vi. Make sure that if you are deriving the file from say the file constants such as the Current VI's Path, that if the VI is contained in a LLB, then this will be in the path name. eg ..\myLib.llb\myActualVI.vi. Therefore, you will have to strip out the llb. Similarly, if you have built an exe file, the pathname will contain the myEXE.exe.
Hope this provides some pointers. If not then post your VI, so others can help pin point your problem.
Regards
Ray Farmer
Regards
Ray Farmer -
Not working. Error msg: "error.migration.source.option,null"
Export to files is successfull but when trying to import the error message is shown.
Anyone have a remedy?Hi,
I got the same error a couple of times and solved it by restarting Foundation Services. Not the best solution but it worked for me.
Hope it helps.
//Regards
C -
LabView linux : error 7 when accessing shared library file
Trying to wrap a shared object to LabVIEW Linux using Call Library Function Node VI I get an error 7 (non existing or moved file or missformed path) while the file is existing and path ok (I used FileDialog to be sure to have the correct path).
This is really surprising since when opening 'Configure ...' menu I am able to select my shared object file and LabVIEW lists correctly the functions of the contained in the library.
I don't how to deal with such an error and need help (I spent a lot of hours in trying to find the solution by myself). Surprisingly there is not example related to that in the Linux release of LabView (note: I run LAbVIEW 9).
Many thanks in advance for any comments
Christophemay be worth mentioning what you did incase others are having similar problems, congrats on solving your problem though
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7 -
"error building executble. unable to create file."
Hello!
When I try to run or Build an Pocket PC application i get thes message: "error building executble. unable to create file."
I have installed:
LAbview 8
Microsoft embedded visual c++ 4.0
Microsoft Pocket PC SDK
PDA Module 8
Does anyone have a clue wats wrong?The builder is missing the C compiler and the linker from Microsoft for the emulator target.
On my system they are located in C:\Program Files\Microsoft eMbedded C++ 4.0\EVC\wce420\bin. Check on your computer.
I couldn't find a place where to set this path (remember: I have 7.1, 8.0 may support this settings, although it's not likely).
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011 -
Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .
Hi
I have an C# application suddenly crashing after months of operation. The application is running on a Windows7 machine and is controlling 2 x NI6602 PCI counter cards through daqmx. The only clues to what when wrong is the following messages in the Windows Application Log.
Message 1 (occurring first):
LabVIEW information: Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .
Message 2:
Faulting application name: RecordingStationGUI.exe, version: 1.0.0.0, time stamp: 0x4e3fa214Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaaeException code: 0x80000003
Does anyone know what is causing this error and/or how I prevent this from happening again?
Regards,
molaWhere you ever able to resolve this issue? I have a very similar issue
-
Error installing LabVIEW 2011 on Win 7
I'm getting an error installing LabVIEW 2011 Professional:
I found a thread concerning missing MSIs, which suggested that one run setup.exe with the /log function, so I did, but I don't think it actually says anything useful.
I also found a Microsoft download page for WindowsInstaller-KB893803-v2-x86.exe, which is the thing that's supposed to be missing. This seems to be an old version of the installer (most recent compatible OS = WinXP SP2), so I don't really feel like installing this on my Windows 7 system.
Help!! Thanks in advance.
-- PhilipHi Keller,
I'm Jamie an Applications Engineer at NI UK.
It does seem that you are missing some of the necessary support files required for the installer to run correctly, the details of which are available in the KnowledgeBase article here. Did you download the install files or are you installing from disk?
In addition to the setup.exe file, ensure that you have copied the following folders to the target PC or destination folder when creating an installer with LabVIEW.
bin
license
supportfiles
Hope this helps get you up and running with LabVIEW 2011, let me know if you experience any further issues.
Thanks
Jamie
Jamie S.
Applications Engineer
National Instruments -
Error occurred while building the following file
hi,
i get an error while compilating my programm. i did not change the vis listed below, they are standard express vi's...
An error occurred while building the following file:
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\express\express analysis\CurveFittingBlock.llb\subCurveFitting.vi
Error 1003 occurred at ABAPI Dist Chg and Save VIs.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> BUIP_Create_Build_Rule.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: The VI is not executable.I would recommend to update to at least LabVIEW 8.0.1 (free update) and masscompile the vi.lib folder.
You can download the update here:
http://digital.ni.com/softlib.nsf/websearch/4C1209D42320BCFD8625711C005FB25B?opendocument&node=13207... -
Getting errors and LabView with ARM project won't compile
Hello there, I am currently turning to make a project run on a STM32f103C8 chip using LabView with ARM. I am currently trying to compile a ARM project but I have no been successful.
I have tried using the STM32F10x template uploaded by Joshua, and it tries to compile. At first I was getting the "stm32f10x_tim1.c" file missing error, but that was solved by downloading the file from firmware v1 and adding it to the includes folder. but now i am getting a new error saying "profile_timer.h" is missing.
I am using:
Windows 7
LabView 2010 evaluation
NI ARM module
and I am trying to compile a empty project
Here is the error code message, any hepl will be useful, thanks:
[12:39:37 PM] Status: Error
Build target 'LabVIEW'
compiling RTX_Config.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling Retarget.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling TargetInit.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling ARM_Serial.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling LVTree.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling Pict.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling arrresize.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\analysis\development\include\platdefines.h(321): error: #35: #error directive:
Target not created
Status: Build failed.blank projects using other included boards seem to compile fine
and i have added a mock "profile_timer" to the keil library (just as a quick fix) and it seems to have stopped a lot of the errors, however i am still getting a few
these seem to be:
compiling CCGDatalogSupport.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGDatalogSupport.c(23): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGFileSupport.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGFileSupport.c(22): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGFileSupport2.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGFileSupport2.c(22): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGIrDASupport.c...
compiling CCGNetConnRefNum.c...
compiling CCGSerial.c...
compiling LVTree.c...
compiling Pict.c...
compiling arrresize.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\analysis\development\include\platdefines.h(321): error: #35: #error directive:
Target not created
Status: Build failed.
i'll see if i can find a file for the ccgfilesupportpriv.h but the error directive worries me a bit -
Run-time error "5010": Labview: VI execution ...
I get Run-time error "5010": Labview: VI execution terminated by server. This error occurs sporatically. I am running Visual Basic 5.0 application that communicates to Labview 6.1 VIs. It is using NI-Imaq to do vision analysis of parts. I just need to know what to look for that may be causing this error. I am also running it on a PXI system with 64 MB of memory.
Hello,
I recommend you to do direct function calls to NI-IMAQ and NI Vision function libraries from Visual Basic as this will be a lot more efficient and improve rubustness of your application. During the installation of both software, you have the option to include support files for Visal Basic. Once these components are installed you should see the shipping examples in the following directories (if installed in the default path):
(NI-IMAQ) C:\Program Files\National Instruments\NI-IMAQ\Sample\VB
(NI Vision) C:\Program Files\National Instruments\MeasurementStudio\VB\Samples\IMAQ
There are additional examples that can be found in the Code Library (see the link on the left sidebar).
Let me know if you have further questions regarding this issue.
Regards,
Yusuf C.
Applications Engineering
National Instruments -
Error for LabVIEW PDA Module Version 8.5
Hi all
I am face on with problem when i try to do the LabVIEW PDA Module Version 8.5 Tutorial which is include in labVIew software package.All my lincence status also activated and do install all the accessories that i need.I follow all the steps by tutorial sheet.But i still face on with problems, so now i would like to uninstall my LabVIEW software and reinstall again.The error is as shown in attach file. i want to know is there any problem if i uninstall my software? If anyone can show me why the error is? The technician said even though the error come out, just close and wait for about 5 min.After 5 min already the emulator will be come out.But mine haven't comeout.So please any one can show me?
Thanks a lot
Best Regards
Nyan Lin
PS: The tutorial that i do is as shown in attach file.
Attachments:
PDA_Getting_Started.pdf 452 KB
error14.JPG 119 KB
error8.JPG 131 KBHi Stephan
Thanks for giving your time for me. I am a new LabVIEW PDA Module user.And I have to do it because of my final year project.I am student from Nanyang Polytechnic (Singapore). I never use labVIEW software and LabVIEW PDA Module software before.This is my first time. The software that i have is LabVIEW Version 8.5. So as what you say is i need to reinstall my the whole LabVIEW PDA Module and all start again? Then i know that for PDA Module i need to download Virtual PC2007.But what else i still need to install? The Window Mobile 5.0 emulator and the rest softwares is it include in the LabVIEW PDA Module software package? If not, please let me know which software i still have to download? Then i go and check the software status that i have and the lincense status is as shown in attach files.Thanks for giving your time and help me.
With Regards
Nyan Lin
Attachments:
Software status.JPG 72 KB
Lincense.JPG 98 KB -
Getting syntax error in /usr/include/sys/ header files during Compilation
Hi,
I am migrating old PRO C code from Oracle 8 + Solaris 8 to Oracle 10 + Solaris 10 environment. While compiling the code it is giving error :*
Syntax error at line 69, column 2, file /usr/include/sys/uio.h:
Error at line 69, column 2 in file /usr/include/sys/uio.h
lloff_t uiooffset; /* file offset */
.1
PCC-S-02201, Encountered the symbol "lloff_t" when expecting one of the followin
g:
} char, const, double, enum, float, int, long, ulong_varchar,
OCIBFileLocator OCIBlobLocator, OCIClobLocator, OCIDateTime,
OCIExtProcContext, OCIInterval, OCIRowid, OCIDate, OCINumber,
OCIRaw, OCIString, short, signed, sql_context, sql_cursor,
struct, union, unsigned, utext, uvarchar, varchar, void,
volatile, a typedef name,
The symbol "enum," was substituted for "lloff_t" to continue.
Any guess why this is happening?Hi,
Try using the PARSE=PARTIAL USERID=user/password[@SID] SQLCHECK=SEMANTICS precompiler options.
All your hosts variables must be declared inside a Declare section.
Reference: Pro C/C++ Programmers Guide, chapter 5
Reguards,
Rene Rivet -
When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?
Anyone can help to advice how to solve this issue ?
-
When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.
Maybe you are looking for
-
The value is not passing to l_text1 field from transaction code screen field DATA: l_text1 TYPE vekp-exidv, l_vekp TYPE vekp-exidv. IF l_text1 IS NOT INITIAL. SELECT SINGLE exidv FROM vekp INTO l_vekp WHERE exidv EQ l_text1. IF sy-s
-
How to Force Canon Pixma MX870 to Print Black
How do you force the MX870 to print black and to use the big black ink tank when printing all text and documents? Is there a specific setting that does this? Isn't the big black tank supposed to be used for text printing and the smaller black tank is
-
My Forms in Addon Installer Wizard
Hello everyone, I have managed to install my addon in SP01 using B1DE Tools. The problem is that I don´t know in which directory I have to copy my forms (created with Screen Painter) so they open when the addon initiates. I have copied them in the BI
-
Why do the pictures look great in Idvd but grainy once they are burned to a dvd. I create a slideshow in Iphoto, share it to idvd but i lose a large amount of picture quality once the dvd is burned. Can anyone help
-
Hi All, I created a table with three columns - Select(Checkbox), EmpID(TextView), Status(TextView). The data for EmpId column and Status column is coming from a webservice. While i created a node with a boolean attribute and bound to the "Checked" pr