Getting errors and LabView with ARM project won't compile

Hello there, I am currently turning to make a project run on a STM32f103C8 chip using LabView with ARM. I am currently trying to compile a ARM project but I have no been successful.
I have tried using the STM32F10x template uploaded by Joshua, and it tries to compile. At first I was getting the "stm32f10x_tim1.c" file missing error, but that was solved by downloading the file from firmware v1 and adding it to the includes folder. but now i am getting a new error saying "profile_timer.h" is missing.
I am using:
Windows 7
LabView 2010 evaluation
NI ARM module
and I am trying to compile a empty project
Here is the error code message, any hepl will be useful, thanks:
[12:39:37 PM] Status: Error
Build target 'LabVIEW'
compiling RTX_Config.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling Retarget.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling TargetInit.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling ARM_Serial.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling LVTree.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling Pict.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling arrresize.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\analysis\development\include\platdefines.h(321): error: #35: #error directive:
Target not created
Status: Build failed.

blank projects using other included boards seem to compile fine
and i have added a mock "profile_timer" to the keil library (just as a quick fix) and it seems to have stopped a lot of the errors, however i am still getting a few
these seem to be:
compiling CCGDatalogSupport.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGDatalogSupport.c(23): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGFileSupport.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGFileSupport.c(22): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGFileSupport2.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGFileSupport2.c(22): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGIrDASupport.c...
compiling CCGNetConnRefNum.c...
compiling CCGSerial.c...
compiling LVTree.c...
compiling Pict.c...
compiling arrresize.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\analysis\development\include\platdefines.h(321): error: #35: #error directive:
Target not created
Status: Build failed.
i'll see if i can find a file for the ccgfilesupportpriv.h but the error directive worries me a bit

Similar Messages

Getting error reading settings with service profile manager. Why and what can I do to solve problem?

Getting "error reading settings" with the service profile manager in Lion server OS. Why and what can I do to solve problem?

I have also had the 'Error reading settings' problem in Profile Manager, despite trying everything in the discussions and clean reinstalls (which work for a little while only).
It seems that various different fixes work for some people but not others; and the underlying cause of the problem has not been resolved.
There are now numerous threads on this problem (there are yet others with similar problems):
https://discussions.apple.com/thread/3189397
https://discussions.apple.com/thread/3195100
https://discussions.apple.com/thread/3212015
https://discussions.apple.com/thread/3208533
https://discussions.apple.com/thread/3249062
https://discussions.apple.com/thread/3199734
https://discussions.apple.com/thread/3212304
I have posted this in each to try and pull things together a bit.
Does anyone know if Apple has acknowledged the issue and offered an official response?

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/

How to get gui_download and gui_upload with popup filename?

how to get gui_download and gui_upload with popup filename?

Here is a short example.
report zrich_0003 .
data: ifiletab type filetable.
data: xfiletab like line of ifiletab.
data: xstring type string.
data: rc type i.
data: itab type table of string.
data: xtab type string.
start-of-selection.
call method cl_gui_frontend_services=>file_open_dialog
    changing
      file_table              = ifiletab
      rc                      = rc.
read table ifiletab into xfiletab index 1.
xstring = xfiletab-filename.
check not xstring is initial.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = xstring
changing
    data_tab                = itab.
loop at itab into xtab.
    write:/ xtab.
endloop.
Regards,
Rich Heilman

Cant download Adobe Air and Update Photoshop Elemente 9 keep getting Error and now cant use Organize

Cant download Adobe Air and Update Photoshop elements 9 keep getting Error and not cant use organizer

What is your operating system & version?
What exactly means "cant"? And what is the error you get?

HT201210 i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server c

i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server contact problem. what can i do to start my phone???? plz help me

I will need a little bit of information about your phone. What kind of error are you getting?

Download from appstore get errors, and stops. but my account already charged $19.99 , how to get my money back?

i tried to buy keynote from the appstore, and the download get errors, and stops. but my account already charged $19.99 , how to get my money back?

Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
Keynote's minimum requirements are v10.7.4 Lion in case you are running a prior Mac OS X. That information is available under Information right side of the Keynote window at the App Store.
and the download get errors, and stops
Try turning off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
Disable anti virus software.
Then open the App Store. From the App Store menu bar top of your screen click Store > Check for Unfinished Downloads

My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

Do you get Siri and passbook with iPhone 4

Do you get Siri and passbook with iPhone 4

Siri no, Passbook yes.
http://support.apple.com/kb/HT5457

How to get errors and/or air.trace() from installed air app?

I'm trying to debug an installed air app that behaves
differently once installed than when run with adl. However, i can't
figure out any way to get errors or air.trace() information. I am
on OS X (10.5.6). Any tips?
I imagine this should be easy since debugging an installed
app is pretty much a necessity for development.

You can enable logging to a text file using settings in the
mm.cfg file. See
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19323
Note that ALL trace output will go to the log.
Other things you can do are:
1. Run the installed app with adl -- just pass the installed
app descriptor to adl on the command line
2. Supply a publisher id to adl. This removes one difference
between installed/ not installed apps and may be enough if the
behavior issue has to do with local connections or other matters
involving the publisher id.
3. Use the adl -nodebug flag. This removes another difference
between installed/uninstalled apps. You won't see uncaught
exceptions, but trace statements are still reported.

Getting error in CTI with Genesys

Hi all,
I am working on project with CTI integration but getting error about connection between SAP phone & CRM server for o/b & i/b calls.
Any help?
Thanks,
Sush

Hello friends,
we have installed gplus adapter for sap-erp integration. Can some one please let me know how to configure a connection between sap application server and an Adapter.
We got stuck in creating a SAPphone server on sap. In transaction SM59 while creating a new TCP/ip connection RFC destination, we need to set the RFC destination name and program id .
what should be the value for program id? Do we need to code a RFC for this ? cos be gave the program id as SPS.PROG as mentioned in the gplus deployment guide, but the connection test failed.
Can someone please help me in fixing this.
Just one more, how to obtain SAP RFC SDK binary files? Shd these binary files need to be placed in the gplus working directory? Does the tcp/IP connection failed due to missing binary files?
Thanks in Advance. please reply me on [email protected]

Getting error in creating a new project for UI5

Hello ,
I installed eclipse and added this plugin :
https://tools.hana.ondemand.com/juno
But when all process is done completely on creating a project i am getting this error:

Dear All,
Thanks Valter Araujo.
I was also getting same error but now it is working. initially JDK compiler was set 1.4 but in my system 1.7 was there. so just i have made JDK compiler 1.7.
Please follow the below steps for correct setting-
Window Menu->Preference ->Compiler->JDK Compiler
Choose the compiler version as you have installed in system
Regard,
Pappu.

Get error while Integrating with Oracle's Enterprise User Security

Hi,
I am trying to create an Oracle Enterprise User integrating with OVD and MS Active Directory.
I am following all the steps in Integrating with Oracle's Enterprise User Security.
In the documentation section: "Configuring Oracle Virtual Directory for the Integration"
I have applied the steps successfully until:
Update and load the entries into the Local Store Adapters by performing the following steps:
I have successfully extended the Oracle Virtual Directory schema with the loadOVD.ldif
However I am getting errors in the next step: Update realmRoot.ldif to use your namespaces
The next step states the following:
Update realmRoot.ldif to use your namespaces, including the dn, dc, o, orclsubscriberfullname,
and memberurl attributes in the file. If you have a DN mapping between Active Directory and
Oracle Virtual Directory, use the DN that you see from Oracle Virtual Directory.
The realmRoot.ldif file is located in ORACLE_VIRTUAL_DIRECTORY_HOME/eus,
where ORACLE_VIRTUAL_DIRECTORY_HOME represents the location where Oracle Virtual Directory is installed.
The realmRoot.ldif file contains core entries in the directory namespace that Enterprise User Security queries. The realmRoot.ldif file also contains the dynamic group that contains the registered Enterprise User Security databases to allow secured access to sensitive Enterprise User Security related attributes, like the user's Enterprise User Security hashed password attribute.
Load your domain root information in the realmRoot.ldif file into Oracle Virtual Directory using the following command:
ldapmodify -h Oracle_Virtual_Directory_Host –p OVD_Port -D cn=admin -w Admin_Password -v -a –f realmRoot.ldif
When I run the ldapmodify command I get the following error:
add dc:
testldap
add objectclass:
top
domain
domainDNS
adding new entry DC=testldap,DC=local
ldap_add: Operations error
ldap_add: additional info: LDAP Error 1 : null
The actual realmRoot.ldif looks like this:
# Please uncomment the following one line if you are importing this
# LDIF file via OVD Manager or OVD Server's ldapmodify tool.
#version: 1
#dn: dc=com
#dc: com
#objectclass: domain
dn: DC=testldap,DC=local
changetype: add
dc: testldap
#o: subarashii
objectclass: top
objectclass: domain
objectclass: domainDNS
#objectclass: orclSubscriber
#orclsubscriberfullname: subarashii
#orclVersion: 90400
# If your domain structure has more layers than dc=subarashii,dc=com,
# for example, it's dc=us,dc=subarashii,dc=com, you will need to load
# the following ldif entry/entries too.
# Uncomment out the following, if required.
#dn: dc=us,dc=subarashii,dc=com
#orclversion: 90400
#orclsubscriberfullname: us
#objectclass: domain
#objectclass: top
#objectclass: orclSubscriber
#dc: us
# Adding EUSDBGroup entry
# Modify the memberurl attribute and replace it with your own domain name
#dn: cn=EUSDBGROUP,dc=subarashii,dc=com
#cn: EUSDBGROUP
#memberurl:ldap:///dc=subarashii,dc=com??sub?(&(objectclass=orclService)(objectclass=orclDBServer))
#objectclass:groupofuniquenames
#objectclass:groupofurls
#objectclass:top

Did you ever get your questions answered about the realmRoot.ldif file? Did you manage to configure a successful integration of OVD with EUS? I am battling with trying to get Oracle Virtual Directory integrated with Enterprise User Security, but every step I take in Chapter 7 of the OVD manual fails in some way, and the instructions are often vague. I am not sure how to modify the realmRoot.ldif file. Is there any improved documentation on this? I have logged a Service Request, but not getting any help. Any resources or documentation you know of that provides better guidance would be much appreciated. I am way behind my schedule now and this is a very frustrating exercise.
Thanks.

Random users getting errors sending emails with instant bounce backs

I have recently had a fair amount of my users have issues sending emails to internal or external email accounts. When they hit send they get a NDR immediately with the Error 0x80004005-00000000-00000000. It does not matter if there is 1 user
the message is being sent to or many users this is not discriminating in that respect.
I have found a couple of fixes that seem to solve the problem, some permanent and some it is only temporary. If I repair the account in Outlook it fixes the problem, some I have to remove the account and add it back in while deleting the ost file.
Others I have to do the above and remove cached mode.
What is causing this issue? I suspect that it was and update but I cannot be sure and it all started the same day this week. We are using Outlook 2013 client and with Exchange 2010 servers. I have checked the logs on the server and there
is nothing glaring. I have done searches and the results do not give a cause, just the fixes which I have tried. Has anyone seen this before and found the source of the problem?
Eric

Hi,
What does the NDR message say in detail?
If the body of the message contains the following text:
The message could not be sent. Try sending the message again later, or contact your network administrator.
[0x80004005-00000000-00000000]
We can refer to this kb:
http://support.microsoft.com/kb/2383603
Outlook 2010 and Outlook 2013 introduce new named properties. When used, these may be added to the named properties table of the Exchange Server database. Each Exchange database's named properties table has a limit and a new message with additional
named properties has caused the quota to be exceeded.
A workaround on Outlook is to remove any additional mailboxes or shared mailboxes from Outlook.
For resolutions on Exchange, I suggest you read the Resolution section in the kb or contact the Exchange Server support:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

I keep getting error code 3 with a fresh sync using AUSST. Help please.

The tool tells me the folder exists at the given path, so i'm using the command correctly.
It's a Windows server, the path is not local to the server, but is set up as the host folder in IIS 7. I can access the website i created for this, and can see the "updates" and further folders that i have created.
I get error code 3 when trying to synchronise, and all it does is delete the folder specified as root.
I run the command like this:
adobeupdateserversetuptool.exe --root="\\server\share\adobe\updates\cc"
then choose option 1 on the menu, which is "fresh synchronisation".
Your choice: 1
Fresh Synchronization chosen.
Folder exists at given root path! All the contents of the folder will be deleted
Enter 'Y' to continue or any other key to exit: y
Could not access the specified path.
AdobeUpdateServerSetupTool returned with code: 3.
"everyone" and "domain computers" has been granted full access to the folder in question, and security inheritance is on.
Any ideas?

I have got past the error code 3, but now I get error code 4...

Getting errors and LabView with ARM project won't compile

Similar Messages

Maybe you are looking for