Error MM335 when trying to change profit center on material master record

We are trying to change the profit center that is assigned on the u201CSales: general/plantu201D tab in the material master (same as what shows on the u201CCosting1u201D tab of the material master).
The following error message appears: u201CYou want to change the profit center but there are still material stocks u2013 Message no. MM335.u201D
Our SAP version is SAP ECC 5.0 with support pack 19.
This particular material that we are trying to change only exists within one plant and one storage location in SAP.
I have done the following in order to try and resolve this issue:
1. Removed all inventory from the inventory management and warehouse management side for the material.
2. Closed all open purchase orders and process orders for the material.
3. Looked at the MD04 screen to verify there are no outstanding documents for this material.
I also searched for OSS notes and found note #1249513 which was applied to our sandbox environment. This note did not fix our problem.
I had a developer to debug the code that is being triggered upon making a profit center change. Two important pieces of information he found is that the SAP code is:
1. Looking to see if the u2018New G/Lu2019 is turned on and u2018profit centeru2019 is active in the new G/L.
2. Looking to see if previous period stock exists for the material.
The code is then setting a flag which causes the error message to appear.
I have found other comments in the forum stating to change the error to a warning for message MM335. I believe this is not the correct solution; as this would allow a change to a profit center even if stock exists, open orders exist, etc. I also know we could trick the system by temporarily changing the message to a warning and sending that through to production, changing the material master and following up with a transport to change the message back to an error. This would work, but we want a final resolution to this problem.
I believe that 2 OSS notes that were included in our latest support pack upgrade has caused this problem. Those notes are: 1057674 and 1106510.
I plan on opening a note with SAP, but was wondering if any users have experienced this same problem after a recent support pack upgrade.
Regards,
JH

Following is additional information regarding this problem. We were able to successfully change the profit center on some of our materials by making sure there was no stock in previous period and current period (and no open sales orders, purchase orders, etc.).
- JH

Similar Messages

"an error occurred when trying to change modules"

When I switch repeatedly between Library and Develop with the R and E keys, I always sooner or later run into a problem where nothing happens when I press R. Really that should go the Develop module and enter crop mode -- what I'm usually trying to do, when this happens, is crop a bunch of photos. So I'll be using Library mode to identify the photos that need cropping, stepping through photos with the arrow keys, then when I find one that I want to crop, I press R, enter develop+crop mode, crop the photo, press E to return to library+loupe view, and continue.
Sometimes this works 10 times, sometimes it only works twice, but always, relatively soon, when I press R, "nothing" will happen. Actually what's happening is an error dialog appears saying "an error occurred when trying to change modules", then the error dialog immediately disappears before I can read it. I know what it says, because if I click the Develop module with the mouse, I get the same message but it sticks around until I press OK.
Once this happens, I'm entirely unable to use the Develop module until I quit the program. I had to quit and restart LR about 20 times during an hour of working with it last night, and this morning, in the first 15 minutes, I'm already on the 3rd restart.
Anyone else see this?
Details: LR 1.1 on Mac OS 10.4.10, 4-core Mac Pro, images are a mix of JPG from a pocket camera and NEF from a Nikon D40. I don't think it is related to the specific images, as it strikes apparently at random, and after exit and restart, I can crop that same photo, but a different one will eventually cause the same problem again.

Sean, thanks for the Return key tip. I knew about that at one point, but lately I was trying to use Enter (the one on the numeric keypad, at the very lower right corner of the keyboard, which is really easy to hit with my thumb even when my hand is on the mouse! And Enter doesn't invoke the crop, so I forgot that Return did). That is a better way.
I don't see the RE problem on my MacBook, only on my desktop computer, and that one is also experiencing other flakiness (
metamatt, "missing text / thumbnails / many Lightroom UI elements disappeared" #, 18 Aug 2007 3:08 pm) so I think I'm going to try a complete reinstall there.

Lr 2.2 broken - an error occurred when trying to change modules

I get the message "an error occurred when trying to change modules when I try to go into library mode. quit and restart didn't help. Catalog verified as okay. Worked before update.

Deleting preferences did not help. I also tried creating a new lightroom catalog, and can navigate around it fine. However, if I do something like change to Library in the new catalog and then open my useful catalog, I immediately get the error changing modules message. I tried reimporting my useful catalog, which also did not work. My understanding is that this error is some kind of catch all which could indicate any number of different issues - is there a way for me to roll back to 2.1? Is there a reason that so many people are having an issue with this upgrade (there are posts in other forums and blogs about people having this same issue after upgrading).

Change profit centre in material master

Dear all,
How to change profit centre in material master with stock(opening balance - 561 stock ?
What are implications of changing profit centre in material master ?
Jeyakanthan

In standard SAP it is possible to change the profit center at any time.
However this will create inconsistencies in your profit center accounting. Hence you should issue all stock first to a cost center with 201 movement, then change the profit center, then get the material back with 202 movement.
You need to make MM335 message an error message in OMT4 to allow a change only if there is no stock
If you dont follow this way, then you create inconsistencies in profit center accounting.
Because...you received your stock without profit center (actually it is a certain default profit center), if you then change the PC in your material, then each issue will be posted to the new PC, while it never had a receipt.

Profit center in material master is not in MARC table

Hi All,
We have maintained profit center in Material master costing 1 screen but when I am checking it in MARC table I am not able to see profit center in MARC Table.
Please tell me in which table this profit center data will sit.
Thanks in advance.
Pavan H S

Hi,
The field name of profit center in table MARC is MARC-PRCTR, maybe you should increase the width of output list in the selection screen when you use data browser of table; or from menu Settings>List Format>Choose Fields, then select field PRCTR to display, that will be okay!
Good day
Z.T

Use of profit center in Material master

Hello Consultants,
Kindly explain me the use of Profit center in material master in Sales General/Plant and Cisting 1 view?
Thanks,
SK

Hi,
Generally you use this field of profit center based on the organizational logic decided while implementing the SAP.
i.e. Suppose, you want to have your profit center with nomenclature as Site (Plant) + Line of Business (LOB). So, according to this logic you map the same line of business with External Merchandise category and concepts (according to your verticals of business). So, whenever you create any transactions related to this article (material), system will pick up profit center from this article master and for common profit center (for expenses such as service tax and other which needs to be done at common and after that distribute through assessment / disrtibution cycle).
Hope it will clear the purpose of the same from above example. Pls get back for further query.
Thanks & Regards,
Taral Patel

Changing a profit center on material master

Dear,
My user needs to Change the Profit Center on Material, and he sent to me the questions below:
Could you please help me with these questions ?
If that inventory is issued off the system, will it allow change? If there are open orders (purchase, process, sales or transfer) will it allow change? What are all the things that the logic is looking at?
Thanks and regards,
Orlando

just think about it. do you use profit center accounting?
As you maintain profit center, I assume the answer is yes.
do you want accurate profit center accounting?
if yes, then never change the profit center while you have stock.
..because: you received the stock to profit center A. if you change the PC in material master, then the stock does not move to profit center B. but the next goods issue is recorded with profit center B.
so at the end of the day, you have an amount at profit center A, which will never get removed. and you have an issue on profit center B for that you do not have a goods receipt.

Profit center at Material master

Hi All
We have one issue related to Profit center
Material Master record not maintained with out Profit center
PO created GR arrived ,MIGO posted with 101
Now we are unable to do any inventory transactions
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Then we canceled Material document ,made the stock Zero with 102
Try to enter profit center again at MM02,Error giving as "stock still exists"
Checked MMBE, no stock there ,but Onorder stock still showing
Is there any dependency on previous period stocks because MIGO 101 posted in April,canceled with 102 with previuos period
Any suggestions?
Thanks
SAP MM

Hi,
this is new G/L created?? . it may the reason of document splitting . please check the entry exist in
SPRO-FINANCIAL ACCOUNTING(NEW)-GL ACCNT(NEW) -BUSINESS TRANSACTION-DOCUMENT SPLITTING-CLASSIFY G/L ACCOUNTS FOR DOCUMENT SPLITTING.
REGARDS,
MUKESH

How to change cost center in Asset Master record ?

Hi SAP Gurus,
My client is asking me to change cost centers in Asset Master records using LSMW. Currently, the field cost center is in display mode. In order to change the cost center, the field cost center must be in change mode while recording in LSMW. I have changed screen layout rule for Asset Master data. I have selected radio button "Optional" for cost center in screen layout for Asset Master data. But still cost center field is in display mode in Asset Master record. It must be changeable.
Please suggest me how I can resolve the issue.
Regards,
K.S.K

Hi Saravana,
We can change the cost center for AuC Investment measure at WBS element level. For that purpose we need to go to AuC Investment measure Asset master record and check WBS element under Origin Tab. Double click on WBSE and then check the cost center under Assignment tab. And also check the cost center in Asset master record for the same. Now you can go to T.Code CJ12 (Change WBS Element) and change the cost center for the same. Once you make changes system automatically change the cost center in asset master record for the same.
Note: - Now you have to identify all the AuC Investment measure Assets and the WBS Element for the same. Then change the cost center in WBS Element record. And the corresponding changes will be done in relevant Asset master record automatically.
But before making the change please check with the PS/PM consultant regarding changes in WBS element. Means where it will effect?
With Regards
Ravinder Kaushik

Pick profit center from material master

HI experts
the client Requirement is while customer payment the current system is picking profit center from customer master (there is a validation for customer to pick the profit center ) but now the client requirement is that ins ted of picking profit center from customer master it should pick from material,
please any body can suggest is there any user exit for the above requirement or any other alternative
Regards

Hi
I think you have written two substitution on one filed
one is from the WBS element and another is from Material
So one rule is overwriting now. i think it is taking value from Material but it is overwriting with past value ie from WBS
Ask you abaper, after WBS rule your new rule should be trigger
So that new rule will overwrite the old rule
Advise : Dont keep contra entries like this, keep some if conditions
Vishnu

Error message when trying to change Foreground/Background color

Just in case anyone is having this problem in Photoshop CC where when you try to change/exchange or set to default the Background/Foreground colors and you get an error message of something like "Could not complete because of program error". I found the cure for this in an archive from when CS6 was in beta testing. Basically you have to delete the preferences file and restart the program. Here's a link to the article http://forums.adobe.com/message/4336237. Apparently this "beta" problem can still occur as I am using the most recent version of Photoshop CC.

If you are trying to change the settings of your Router using the LELA software, and if you are getting an error message "Unable to Save the Data" its better you can exit from the LELA software and change all the Configuration settings on your Router Manaully.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, Click on the Wireless tab
Below you can make the changes on your Router ( SSID, Channel and let the SSID Broadcast should be Enable) and click on Save Settings...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the security Mode to WPA Personal and under Passpharase type in your Security password and click on Save Settings..
Once done, Now on your computer try to connect to your Wireless Network. Once connected you should be Online from your Computer.

"Lock table overflow" error msg when trying to change a repot program

hi ABAP experts,
We are getting the following error msg
"Lock table overflow
Choose 'Display object' or 'Cancel'.".
Click the question mark on the same error msg window, then the detailed error msg would like this:
Message no. MC603
Diagnosis
This table overflowed when trying to enter SAP locks in the lock table.
System Response
The locks could not be set.
Procedure
Contact your system administrator. If this error occurs frequently, change the size of the profile parameter 'enque/table_size'. This parameter defines the size of the lock table in KByte.
What would be the reason and how to resolve this problem?
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 2, 2008 1:03 PM

Hi,
This could be bcos the lock table is getting overflowed beyond the allotted space. Check if any other program/BAPI is causing continuous creation of locks.
To analyze choose (SM12) Extras Statistics to display the statistics. These are the statistics that have been compiled since the last time the lock server was restarted.
Check the below link for more information on SAP Lock Concept.
http://help.sap.com/saphelp_nw04/helpdata/en/7b/f9813712f7434be10000009b38f8cf/content.htm
For details on Subsequent Analysis of Lock Table Overflows, check the below links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/43d2416d9c1c7be10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/b57338788f4d72e10000009b38f8cf/content.htm
Hope this helps. <REMOVED BY MODERATOR>
Thanks,
Balaji
Edited by: Alvaro Tejada Galindo on Apr 2, 2008 1:03 PM

New iPod touch. Error message when trying to sync to iTunes first time: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!

I havev a new iPod touch 4th gen. When trying to sync to iTunes first time, I got this error msg: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!

See if the previous discussions with the same error will help you. Some of those are listed on the right side of this page under the heading "More Like This".

How to manage change of profit center in Material master?

The material master of a number of materials were populated with wrong profit center. Transactions were also posted for a few years. Now we want to change the profit centers for some of the materials. These materials have inventory balances and is set for on line transfer to PCA. If we run 1KEH data is duplicated.
What is the best way to manage this change?

Hi Mr.Sanjay,
Good Morning to you,
Regarding your thread the best and easy way to change the profit center is goto MM02 and give the material code and enter and goto Sales: General/plant and in down you can see the Profit Center XXXXX now you change it to YYYYY and save it. So, from now onwards what ever the postings you do the system will show the values in YYYYY - Profit center.
Hope you can solve your thread & for further clarrification feel free to ask me.
Best Regards,
SAPUK.

Why do we get First operand...error message when trying to change password

Hi
I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
We are using PeopleSoft Financials 8.8 SP1.
We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
I cannot replicate it in our test environments.
I have confirmed that we have the PSWDEXPR permission list in our environment.
I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
Any suggestions?

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Error MM335 when trying to change profit center on material master record

Similar Messages

Maybe you are looking for