Error msg on user setup

When setting up a new user you get a error message at the botom of the screen when a field is not setup correctly. For example if user name already exist or password is short,..... How can we change the color of the error message to a different color so it will be visible to the user.

What color do you get currently? It should a red error message. That is normally very easy to tell.
Thanks,
Gordon

Similar Messages

SBL-DAT-00398 error msg for User Field Validation

Hi All,
I have created the following field validation on the User field "Division": Len([<Division>])>0 AND InStr([<ltValidation_OU_ITAG>],[<Division>])>0, As the "Division" field is free text, the porpuse of the validation is to prevent the user from entering in this field any value that is diffrent from the ones available in the custom field "Validation OU" via the User Owner Page Layout. The validation works OK for Admin Role via the User Admin Page Layout but a SBL-DAT-00398 error msg stating " Field '<Division>' does not exist in definition for business component 'Occam Current Employee' " appears when users with other roles are trying to update this field via the User Owner Page Layout.
I have contacted OD Customer support and they validated this in several POD saying this "is most likely a defect in the application" and a CR will be submitted to dev team to fix it sometime in the future.
I am wondering though if support isn't making life easy here stating the above...:
1. Anyone encountered this error before? (couldn't find any trace for this on My Oracle Support)
2. Anyone aware of field validation limitations for the 'User' entity?
3. Workaround suggestions are welcomed
10X for you help!
Alex.

Error(), fatal(), info() and warn() issue FacesMessages that get picked up by the MessageGroup component.
By adding in the uicomponent you can target the facesMessage so that it gets picked up by the Message component associated with the field causing the error.
But, to get the label to show the error as well, you need to throw a validationError. See this tutorial for more informaiton:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/customvalidator.html
Lark

Error msg in user exit

Hi all,
how to set the particular field in customer tab to be open/available for input after error msg is being triggered

> Hi all,
> how to set the particular field in customer tab to be
> open/available for input after error msg is being
> triggered
Hi,
To avoid this problem, put all the related fields in the tab inside a chain..endchain statement At pAI event of your screen program.
e.g.
PROCESS AFTER INPUT.
LOOP AT ITAB.
    CHAIN.
      FIELD MAKT-MATNR.
      FIELD MAKT-MAKTX.
      FIELD MAKT-MAKTG.
      MODULE MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
Regards

Error msg: Current user does not have privileges to perform product Activation

I am running Adobe Photoshop CS 8.0 on Windows Home Vista platform.
I keep getting this error message when I try to open Photoshop:
Current user does not have privileges to perform product activation. Run this application from a user account with administrative privileges or contact your system administrator.
I am the only owner & user of this software. I have re-installed the SW once (full install), and the error message went away for a while.
Now it's come back.
What do I do now?

2 options:
Either disable UAC (User Access Controls) or run the application with Administrator rights.

Receiving error msg in user's mailbox for both Outbound and Inbound IDocs

Hi,
Whenever specific IDoc (Inbound/Outbound) gets failed then the user/org unit assigned in its partner profile should get those error messages in their inbox.
To achieve this for Inbound Idoc I have performed following set of steps:-
1. Created an object and attached it under IDOCAPPL using 'SWO1' and I have set that object type as 'To imported'.
2. I have assigned that object type to event 'ERRORINPUTOCCURRED' and standard tasks '00008068' (Inbound processing error), '00008074'
(Inbound Syntax error), '20000051' (IDoc Application Inbound error), '300000207' (Error during Inbound processing of SYSTAT01) using transaction 'SWETYPV'.
3. I have created an organisation unit with two positions and different jobs where each job has been assigned to specific tasks. User has also been assigned to specific jobs.
4. At the end of this I have assigned this org. unit to IDoc's partner profile.
But this process does not seem to be working we are not receiving any mail in agent's inbox. If someone has done similar kind of thing in past, please let me know the correct step for both Outbound and Inboud IDoc.
Thanks in advance.
Supriya

Hi,
Try this for inbound IDOC
Go to transaction WE42
Give the process code that you gave in the partner profile (WE20)
Select that row and press the details button (F2).
Next to the "Identification" field there will be push button which has the tool tip "ALE table"
Press that button
In the resulting screen..
In the IDOC section..
Give the following..
object type - "new business object that you created"
Start event - INPUTERROROCCURRED
End event - INPUTFINISHED
Hope this works..
Thanks,
Naren

Error msg unix User\root

hello
I face this problem I cant delete any of me photo and music and when I plug the Q10 to the laptop I see file like this photo
and most of those file have crazy size like 2 GB - 1.8 GB
when I try to delete it from there it starts to delete and then a popup tells me I require permission from the Unix User to make changes or delete this file.
please anyone know tell me I have realy importan file and photo on my phone

Pattern p = Pattern.compile("[0-9]+");
Matcher m = p.matcher("12345");
if(m.matches()){
// string is a number
}Typed from memory, but I think this is correct.

User is getting an error msg running report on her pc...but....

Hi Everyone,
Hope all is well....
My user is getting an error msg when running my Disco. query
when I sign on to her pc, the query runs fine.
When my user comes to MY pc and signs on, she gets the same
error msg.
the error msg is:
Microsoft Visual C++ RUNTIME library
runtime error!
Program c:\Oracle\BToolshome_1\bin\dis51usr.exe
this application has requested the runtime to terminate it in an unusual way
Please contact the application's support team for more information.
Our Disco admin, tried to adjust her Discoverer profile settings to match mine. She still gets the error.
I found this link, should I download a hotfix to her computer.
She has other Disco. queries that run fine.
Your ideas would be appreciated! thank you! sandra

Hi Rod,
Thx for writing...
I just stopped by my user's office. She's in a meeting, so cannot access her pc.
I use: 10.1.2.48.18 - if she uses the same, is this number helpful?
Also, how do I request of IT to do the install of: MS Visual C++ Redistribution Packages?
Is that on the Office XP cds?
(You know, I think on occasion I get this msg at home, after loading 2 years ago VB6 at home.
How would I resolve it at home... just wondering....)
thx, sandra

In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file I am getting this error message "C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on th

In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file I am getting this error message"C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on this pls?

Even after deleting all files and folders from hard drive i am still getting this error!!

How to send the PO IDOC error msg's to the concern users.

Dear Forum,
This is my requirement.
We are transferring sales order data from ECC 5.0 to ECC 6.0 through XI.And PO will be created in ECC 6.0 based on the sales order inputs.
When ever the SO data created in ECC 5.0.A sales Order IDOC will be generated and based on these details PO will be created in ECC6.0.Upto this level there is no problem and we have done this.
Source side : ORDRSP Idoc.
Target side : PORDRCP01 Idoc.
In addition to,If PO is not created in ECC 6.0.The suitable error msg will be reached to the concern user's mail ID's.
Please let me know to fulfill the pending task.
Thanks in anticipate.
Best Regards,
Naresh.K

Hi ,
Refer the Acknowledgments of Errors and Error Correction for Idocs.
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/frameset.htm
If the sender is not an IDoc system, you can use the Send ALEAUD
for Partner as Request function in the Integration Server to convert
acknowledgment IDocs to XI request messages and send them
or
Refer this link:
http://www.erpgenie.com/sapgenie/docs/advanced_guide_to_edi_configuration.doc
refer section of the doc 2.3.4. Set-up IDoc administration: (WE46)
Regards,
Sunil.

TS2529 The error msg "The iPad "User's iPad" cannot be synced. You do not have enough access privileges for this operation." appears when I connect my ipad to itunes. How to resolve?

The error msg "The iPad "User's iPad" cannot be synced. You do not have enough access privileges for this operation." appears when I connect my ipad to itunes. How to resolve?

If you're running Windows, close iTunes, right-click on the iTunes icon and choose Run as Administrator, then try syncing again.

Fatal error when installing master collection "[FATAL] Setup - Error installing C:\Users\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx package. Return Value of pim_installPackage = -1

Hi,
When I try to install a trial product like photoshop cs6 or master collection cs6 I keep getting the error " Installer failed to initialized". I used Adobe cleaner to remove all cs6 products and tried again, but no luck, the same error.
I opened the the log file and found that line :
[FATAL] Setup - Error installing C:\Users\moshe-a\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx package.
Return Value of pim_installPackage = -1
Any idea how to fix the problem?
Thank you, Momu

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

Error msg = pls. install/uninstall the product using setup.exe in the root folder

unable to install photoshop elements v10 on a windows 7, ultimate 64bit computer, get:
error msg = pls. install/uninstall the product using setup.exe in the root folder

yes, I am installing as the administrator. I have tried to install from
two different folders;
1. c://adobe photoshop elements 10.msi
and
2. c://program files/adobe/adobe photoshop elements 10.msi
get the same error message from both locations.
the error message is not specific as to "root folder"
someone please help with this. I would like to be able to install this app.

Safari crashing error msg PlugIn Path: /Users/Shared/.AdvancedPicHunter.so PlugIn Identifier: .AdvancedPicHunter.so

safari crashes with this error msg
PlugIn Path: /Users/Shared/.AdvancedPicHunter.so
PlugIn Identifier: .AdvancedPicHunter.so

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update (if Java is already installed) or the Flashback malware removal tool (if Java is not installed under Lion), as well as any other available updates. Installing either of those items should clear the infection in most cases. You must update to the latest version of Mac OS X 10.6 or 10.7 before you can install the Java update.
The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.

TS1717 Installed the iTunes 10 update on my computer (Windows 7). iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. Tried setting up a new user, no help. What's wrong??

Installed the iTunes 10 update on my computer (Windows 7). iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. What's the fix??

Hi sahgin,
The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

Error Msg: Running low on memory.

I keep getting this error msg: 'Bridge is running low on memory. It is recommended that Bridge is restarted.' I am running a Mac OSX 1T and also use an external hard drive. I purged cache for the current folder, purged cache in ACR, tried refreshing my preferences by hitting option when opening Bridge, and raised my cache size to about 250,000 and nothing has worked! Please help!!!!!
Julia

jacnjules wrote:
…What can I do to free up space?
Again, Julia, RAM is not drive "space" you can just "free up".
You have given us no information whatsoever about your setup and the exact versions of the applications and the OS you are running.
Depending on what you have, you may or may not be able to do anything other than add more memory (RAM) to your computer, if the machine can support more.
For instance, I run Photoshop and Bridge very comfortably with just 2 GB of RAM, but—and that is a huge BUT—I'm running Photoshop 11.0.2 under Tiger (Mac OS 10.4.11), and I have permanently disabled the abominable, intrusive Spotblight and the Dashboard on my ancient G4 Power Mac (PPC) machine. I even get away with occasionally running Illustrator or InDesign simultaneously as well. On the other hand, many folks who are running the latest versions of Photoshop and Bridge (CS5) under Snow Leopard (a.k.a. Slow Leper) feel that 8 GB is pretty much the bare minimum to run them these days.
Users who have 32 GB of RAM and more have no complaints.
Wo Tai Lao Le
我太老了

Error msg on user setup

Similar Messages

Maybe you are looking for