Error - No destination storage bin to be found in storage type

Hi all,
this is my flow -
Create STO PO - ME21n
create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
confirm TO- L_TO_CONFIRM
Using BDC i am doing PGI for VL02n
create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
confirm TO- L_TO_CONFIRM
Create GR - 'BAPI_GOODSMVT_CREATE'
Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
No destination storage bin to be found in storage type 104
I have added 2 lines in the FM at exception part -
error_message = 16
OTHERS = 32.
So my return code for the FM - L_TO_CREATE_DN (_FOR i/b delivery)_is 16
message class : L3
message number : 009
message type : E
No destination storage bin to be found in storage type 104
Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
Pls help me.
Sen

Hi all,
Thanks for your replies.
Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
Storage Bin search Strategy:
(1) By storage section: Not active
(2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
Hope my scenarios are clear. Thanks in advance for your help again.
Best regards
Nagarajan

Similar Messages

Storage bin are not found

Hi Gurus,
Could you please help me for my query. We are doing Outbound deliveries for Stock transport orders and we TOs are creating
through VL06O. and some time we are using LT01 to move the material form bin to bin and while confirming the TO system is
giving the error, storage bins are not found but bins are there.and what is the reason for this and how to resolve this.
2. One more Query:
What is the use of LT10 (As i know it is for the bin to bin transfer).
but we have LT01, here also we can transfer bin to bin. what is the main difference. Plz explain
I will appriciate your help.
thnx
raghu

Hi
Find below the answer of your Q
1) Check the storage type defined into the WM1 view for the same material. Check the availability of bins in the same storage type
if both are matching then check the weight parameter of the storage bin and the pallet which you are planning to move into the
Bins
2) LT01 is for single line item whereas LT10 is for collective processing
Regards
Manish

Addition to stock in storage bin

Hi,
in the customizing LE-WM-Master data-Define Storage Type I have defined for storage type 500 that addition to stock is not allowed, so all the bins created in this storage type are not going to allow addition to stock even though in materials master this indicator is marked?
MY requirement is to not allow addition to stock to the bins if some material is placed in that bin even if there is available capacity, but this is true for 99% of the bins, meaning I need for 5 bins in particular, system allow addition to stock because I want to place in there 10 different materials that are really small compared to all other materials.
How can I achieve this?
Regards

Hi Jürgen
When thinking of this setting you told me everything will work perfec if it worked, but even if I put in the customizing of storage type Addition to stock "M" and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4), and the last storage section is linked only to one bin.
The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
Please your inputs will be really appreciated

Error storage bin

movement type 311
tcode mb1b
from sloc 00
to slco 01
quantity 20 pc
error is coming storage bin Z1 not found
settings i have done in warehouse
in 311
destination storage type   : 921
in material master : stock placement (maintianed)
                                stock removal (maintianed)
                               storage section (maintianed)
search atrategy for storage type (maintained for high rack and goods are to be removed from here )
search strategy removal and Putway BOTH ARE MAINTAINED FOR HIGH RACK AND SHELF STORAGE
Edited by: Rahul Tyagi on Feb 12, 2008 11:56 AM

i have created 4 storage types IN my warehouse Z1 and asigned this Z1 to plant and sotrage location SLOC 00 & SLOC 01 in spro>ep>assignment>le
now both the sloc are assigned to the same warehouse that is z1 so it means boththe sloc have same sotrage area avilable
goods are lying at high rack(storage area) for sloc 00
in material master storage indictor for stock placemnt mentioned sz1
entry in storage type seach is like this
Z1(WH)   E(STOCK REMOVE)    ZSI(STORAGE TYPE INDICATOR)     HIGH RACK (STORAGE TYPE)
FOR STOCK REMOVAL ENTERYS ARE IN STORAGE TYPE SEARCH LIKE THIS
Z1(WH)   A(STOCK PUTWAY)         ZRI(INDICATOR FOR STOCK PUTWAY)       SHELF STORAGE
I HAVE ALSO CREATED THE STORAGE BINS FOR ALL THE STORAGE TYPES
AND POINT TO NOTE IS Z1 IS NTO A BIN ITS THE NAME OF WAREHOUSE
IF ASSIGN INTERIM STORAGE AREA IN 311 N FIELD SOURCE THEN IT WORKS FINE
BUT IF I ASSIGN INTERIM AT DESTI THEN THE ERROR COMES AS GIVEN IN THE VERY BEGI.
AND THE RIGHT WAY IS TO ASSIGN THE SINTERIM IN THE DEST. IN 311
PLEASE SUGGEST THE SOLUTIONI CAN ALSO SEND U THE SCREEN SHOT IF U CAN PROVIDE U RMAIL ID (IF IT IS POSSIBLE FOR U)
Edited by: Rahul Tyagi on Feb 12, 2008 12:08 PM

Error in Production Order creation : No Production Storage Bin could be fou

Hi Experts,
I am creating Production Order for a Warehouse Managed Material. On saving the Material, it is resulting in an error saying " No production storage bin could be found (8005 RX1 000000000001802347)u201D
Message No : LP 093.
I guess some master data is missing. Please give some inputs on closing this.
Thank you,
Regards,
Ramakrishna

Hi Jurgen,
As such no Control cycle is exsing for this combination. We are in an Upgrade Project from ECC 5.0 to 6.0 . I am wondering, how this is working in ECC 5.0 with out control cycle as well. Will there be any other possibility
Thank you,
Regards,
Ramakrishna

More than one Quant in a Storage bin section (Strategy P)

Dear all,
We have a Storage type with Putaway strategy P, the SUT check active but no SU Management active, Mixed storage = X and Addition to stock = X.
For this Storage type, our Storage bin type and SUT we have set up in customizing a Bin sectioning 3 meaning the Storage bin is divided into 3 sections so a maximum of 3 Quants per Storage bin. Note that other Bin sectionings have also been set up.
During testing I found out a Storage bin section can only contain one Quant at a time.
Because of Addition to stock = X we can add more quantities of the same Material/Batch to a Storage bin secion that already contains stock of this particular Material/Batch.
If I try to add a Material/Batch to a Storage bin section that already contains stock of another Material/Batch (so, a different Quant), the system gives me an error:
Bin item X in storage bin Y already occupied
Message no. L3063
Now physically for the mentioned SUT our Storage bin is divided into 3 Storage bin sections/pallet places and on a pallet it should be allowed to put multiple Materials/Batches at a time, that is why we set Mixed storage = X in customizing.
Now we can only put one Quant (so one Material/Batch) in a Storage bin section at a time;
We want to be able to put more Quants into a Storage bin section at a time.
How can we achieve this?
Note we rather donu2019t want to use Storage Unit Management.
Thanks for any clues!
Kind regards,
Bart

Hi Bart,
As a thumb rule you cannot have one quant with multiple Materials. Ofcourse you can keep on adding same material /batch is the same quant i.e. in the same Bin section where you already put the material.
Quick win for your case is Increase the number of quants allowed say 15. In this case you can keep on storing different material / batches on the same pallet but system will keep on generating sections.
At any point of time you can easily track how many quants (Mat + quantity) are stored in that Bin & relevant section.
For strategy P , SUT check must be activated you cannot skip it.
If Business is not ready to work with more number of sections , you can always think of mapping another startegy ..you could do more test with Bulk Storage.
To my knowledge Strategy I i.e. Addition to existing stock with Mixed storage Indicator will work very well here.
You just need to map appropriate Capacity check as startegy I goes with active capacity.
Thanks,
Mahesh

Config settings to configure PO doucment number as storage bin coordinates.

Hello,
For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
Please provide config settings to configure PO doucment number as storage bin coordinates.
Regards,
Aravind

Hi .
Go to config - SPRO -> Logistics execution ->warehouse management ->activities ->transfers ->define movement types
choose warehouse number and movement type (as 101)
here you can enter source cordinates and destination cordinates
Hope it helps
Jinoy

Storage bin does not exist

Hi Experts,
While doing the goods issue while confirming the production order (Mvt 261), i am getting error message for the component " Storage bin 01 does not exist (check your entry) Message no. L9 009"
I dont know why it is only checking storage bin as 01, where as stock is maintained in other bins also,
Whether i am missing any point in this.
Pl help.
regards
Utsav

Hi,
Find out why movement type for a component is looking for 01 as storage bin.
I am also finding out this issue.
It must be some fixed bin assigned at storage type level in material master.
I checked in MMR, but no fix bin is assigned in WM2 view. Field is blank. No entry is maintained.
Or check movment type setting what is the source
Where to check this?
Also check any storage bin created for production supply storage type.
Where to check this?
Also youmay need to check any special Movement indicator in material master WM 1 view.
This field is blank in MMR.

Row consolidations of same material in storage bins.

Hi Experts,
we have a requirement below,
. Current Process: Inventory Analysts utilize an established query in SQ00 to enable them to perform row consolidations of same material in storage bins to maximize storage bin capacity and create empty storage bins in warehouses .
Example: Row 621 only has 1 pallet and that pallet will fit in row 625(Row) of which only has 31 but the max is 32 in that bin. Again you see bins 725 and S-27(material) only have 1 pallet each and can fit easily in 715 as it only has 15 pallets but can hold 32.
. The analyst take the data from this query and manually create a Row Movement sheet to give to the forklift drivers to perform the assigned movements.
1) is it possible SAP to do automate this task?
2)Can SAP logically determine this equation?
3) Is it possible SAP to generate this spreadsheet and go ahead and create the TO in the background?
Please do the need full ASAP, Quick response is highly appreciated .
Thanks and Regards,
Chiranjeevi

Of course you can do this, but not with SQ based reports.
You will need to code a custom ABAP report.
First you will need to find best matches in storage bins, then use BAPI for TO creation.
You will easily have all the info from the source and destination bins from your matching
table/data. You can search forums for more info on this BAPI, but I can tell you it is pretty
easy to use even for an inexperienced ABAP-er.
I have created a report for this in my company a while ago, but didn't implement automatic
TO creation since we wanted to give our WH people freedom and didn't want to create a huge
amount of TOs which need to be cancelled if WH workers don't have time to perform this action.
But this is a great tool for any warehouse, especially with bulk non-mixed storage types with
a large number of bins.
Regards

Storage unit types and storage bin types - Need

Hi,
i want to know what is the use of the storage unit type and storage bin type.
thanks,
Maxx

Dear Maxx,
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen.

Storage bin 441 does not exist

hi,
while transfering blocked stock from one sloc to another sloc in a warehouse, i m getting the error message as storage bin 441 does not exist.
my warehouse no is 441
what could be the reason for this .
i have created bins also.

Dear Rajasekaran,
Ware house is different from the storage bin,so you enter proper storage bin number instead of ware house.
Check the settings in LS10 transaction for that storage type with your ware house.
I hope this will help you,
Regards,
Murali.

Create the stock in storage bin level

Hai all
     while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
         --> Maximum weight
         --> Total capacity
         --> Fire containment section
         --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
<i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

Blocking Storage Bin

Hi experts,
I have question about following situation.
I storage goods in more than one storage bin. My storage strategy find storage bin automaticly. If the first storage bin full, strategy find second storage bin. I want that, system block the first storage bin automaticly till the first storage bin will be empty. System doesnt allow add new goods that quant.
how can i do that?
Thank your support.

Hi Manish,
I explain what i need with example;
I have 2 storage bin for my material. All this bin's capacity is 5 pcs. Now first good issue with PO about 5 pcs. this material putaway first bin. then other good issue 3 pcs. This material putaway 2nd bin. Then i remove material 3 pcs in 1st bin. As a result, i have 2 pcs material 1st bin and 3 pcs material seceond bin. My capacity is 3 pcs 1st bin and 2pcs 2nd bin.
Now, if there is good issue same material, system doesn't allow putaway this materials to 1st bin. System block this 1st bin automaticlly. This block is automatically deleted after the last storage unit has been removed from stock (picked from the row).
By the way, am i need batch management to implement this strategy for this material?
Thanks for advice..

Outbound Delivery created between two different Storage Bins

Dear Guru ,
Using WM can I create an SD Outbound Delivery between two different storage bins linked to the same storage location ?
Thanks

Hi,
Between storage bins only transfer posting is possible as per my understanding.

Need to enter the storage bin manually

Hi Team,
Currently while posting the IM movement type 311, storage type(FIFO) search strategy is configured for stock removal process.
Now the requirement is for certain materials, while doing the transaction, we don't want to pick the bin automatically(by using the FIFO), we want to enter the Storage bin manually, please suggest.
Advanced Thanks,
AN Reddy.

Hello A.N Reddy,
There is a confusion here. Are you talking about WM or EWM.
If it is WM, then, I would suggest you to enable, Manual Storage Bin Input for respective WM Movement Type in WM Movement Configuration. That will request you to enter Storage Bin Manually during TO Creation.
If it is EWM, For your process type, Make Search Seq field as Blank and keep your Putaway Rule as " No Putaway Rule ". This will request to you to enter the storage bin Manually during Warehouse Task Creation Process.
In EWM Outbound Process, you have to empty your search criteria in your Pick Rule.
Regards,
Sathish

Error - No destination storage bin to be found in storage type

Similar Messages

Maybe you are looking for