Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Similar Messages

Failed: DDXM_S18005: An error occurred in the PrepareTOC phase while building TableOfContents .

When using DDX to merge certain pdf files, we get the following error:
failed: DDXM_S18005: An error occurred in the PrepareTOC phase while building <TableOfContents>. Cause given.
We are running Coldfusion 9.0.1 on a Windows Server 2008 R2 64-bit server.
The error occurs only on certain pdf files, and only if we include them in the table of contents.
There was a similar bug in Coldfusion 8 that was fixed, but it looks like it's come back again in Coldfusion 9.
merge.cfm:
<CFLOOP LIST="merge_no_toc.ddx,merge_toc.ddx" INDEX="ddx">
    <CFLOOP LIST="good.pdf,bad.pdf" INDEX="pdf">
        <CFSET inputStruct = StructNew()>
        <CFSET StructInsert(inputStruct, "In1", pdf)>
        <CFSET StructInsert(inputStruct, "In2", pdf)>
        <CFSET outputStruct = StructNew()>
        <CFSET outputStruct.Out1 = "merged.pdf">
        <CFPDF ACTION="processddx" DDXFILE="#ddx#" INPUTFILES="#inputStruct#" OUTPUTFILES="#outputStruct#" NAME="merge"></CFPDF>
        <CFOUTPUT>#DDX# with #pdf#:</CFOUTPUT>
        <CFDUMP VAR="#merge#">
        <BR />
    </CFLOOP>
</CFLOOP>
merge_toc.ddx
<?xml version="1.0" encoding="UTF-8" ?>
<DDX xmlns="http://ns.adobe.com/DDX/1.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://ns.adobe.com/DDX/1.0/ coldfusion_ddx.xsd">
    <PDF result="Out1">
        <TableOfContents bookmarkTitle="Table Of Contents" maxBookmarkLevel="1" includeInTOC="false">
            <Header>
                <Center>
                    <StyledText>
                        <p color="black" font-size="16pt">Table of Contents</p>
                        <p />
                        <p />
                    </StyledText>
                </Center>
            </Header>
        </TableOfContents>
        <PDF source="In1" bookmarkTitle="1" includeInTOC="true">
            <PageLabel mode="Define" start="_PageNumber"/>
        </PDF>
        <PDF source="In2" bookmarkTitle="2" includeInTOC="true">
            <PageLabel mode="Define" start="_PageNumber"/>
        </PDF>
    </PDF>
</DDX>
merge_no_toc.ddx
<?xml version="1.0" encoding="UTF-8" ?>
<DDX xmlns="http://ns.adobe.com/DDX/1.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://ns.adobe.com/DDX/1.0/ coldfusion_ddx.xsd">
    <PDF result="Out1">
        <TableOfContents bookmarkTitle="Table Of Contents" maxBookmarkLevel="1" includeInTOC="false">
            <Header>
                <Center>
                    <StyledText>
                        <p color="black" font-size="16pt">Table of Contents</p>
                        <p />
                        <p />
                    </StyledText>
                </Center>
            </Header>
        </TableOfContents>
        <PDF source="In1" bookmarkTitle="1" includeInTOC="false">
            <PageLabel mode="Define" start="_PageNumber"/>
        </PDF>
        <PDF source="In2" bookmarkTitle="2" includeInTOC="false">
            <PageLabel mode="Define" start="_PageNumber"/>
        </PDF>
    </PDF>
</DDX>
The resulting output:
The "bad" pdf is a perfectly normal PDF with the Helvetica font (this is what the copier does).
The "good" pdf is a perfectly normal PDF from a different copier, without the Helvetica font.
The fonts available, as listed by the ColdFusion Administration page, include ArialMT and Helvetica:
The good and bad pdf files, as well as the ddx and cfm files can be downloaded here if you want to run it yourself: http://dl.dropbox.com/u/55552656/merge.zip

https://bugbase.adobe.com/index.cfm?event=bug&id=3192782
I learned about the 8.0.1 part from here:
http://www.designovermatter.com/post.cfm/failed-ddxm-s18005-an-error-occurred-in-the-prepa retoc-phase-while-building-tableofcontents

"An error occured with the boot selection verify media is present and retry" from OS Boot Manager

So I'm trying get my HP ProBook 6550p to boot Linux in UEFI mode.
Some sources say that OS Boot Manager points to \EFI\Microsoft\BOOT\bootmgfw.efi in your ESP, I've placed my EFI Shell there as a PoC test, which of course fails and errors out with the above message.
What am I doing wrong here?

That path would be for the Windows UEFI boot manager, which reads the \EFI\Microsoft\Boot\BCD database to get the boot configuration. In order to boot that path, the UEFI firmware has to be configured with that as the default.
If the computer firmware is not configured to boot efi, it will be trying to load the MBR and boot record.
A ufi shell would be in a path such as \EFI\Boot\ShellX64.efi. To get that to work there has to be a shell entry available at boot time. I have only gotten that to work once--and that was NOT on my g7-1117cl laptop.
I have been looking into this for my Pavillion g7-1117cl laptop, so far with no luck. I can boot into the diagnostics on the HP_TOOLS partition under the path \Hewlett-Packard\SystemDiags. This program has the name of SystemDiags.efi or SystemDiags32.efi. Since it can load that efi file it should be able to load bootmgrfw.efi. But it still needs to be configured in the firmware to boot to that file.

How to check the time taking to extract rows from source and time load data into destination

Hi,
Recently I have started working on Optimizing an SSIS package in 2012. The package reads data from AS 400 server and load into SQL Server table.. No transformations are being used in the package. only ADO.Net Source and OLE DB Destination are using in the
package.
The SSIS package is extracting 6500 rows and loading into database per batch. This process is taking 18 seconds. I would like to know out of 18 secs how much time is being used only to extract data from the source and how much time is taking to write the
data to the database per each batch.
Any thoughts be greatly appreciated...
Thanks,
Venu.

Hello
We need more information regarding your system. If you are using SQL 2014 then you can use the new DMV
sys.dm_exec_query_profiles which is doing this exactly. Check out this URL: http://msdn.microsoft.com/en-us/library/dn223301.aspx
While executing your SSIS project you can examine each and every process and get the percentage it already did and all the information regarding it.
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Canwe reduce the data size in XI coming from source system

Hi Experts,
Happy new year 2010!!!
Is there any option to reduce the size of the messages in XI coming from Sorce system??
suppose the size of the sorce message is 5 MB, can we reduce this size in XI. Any option for this please to improve system performance.
Many Than

Actually, upto 5MB is the ideal size of message that should pass through XI. Still, the solution for your problem depends upon the type of adapter in use. e.g. if it is flat file, you may use Recordset per message, or you may use PayloadZipBean in module chain for adapters supporting modules at sender.
Regards,
Prateek

Time Out Dump while extracting data from table CKIS

Dear Friends,
I am getting TIme Out dump for the below code, while extracting data from table CKIS.
Table CKIS doesn't have any Indexes. Please guide me to resolve this.
Regards,
Viji.
form get_keko_ckis.
SELECT kalnr kalka kadky tvers bwvar matnr werks kokrs
         FROM keko
         INTO TABLE i_keko1
         FOR ALL ENTRIES IN i_final_modify
             WHERE matnr = i_final_modify-main_f
               AND werks = p_werks
               AND kokrs = p_kokrs
               AND kadat = p_kadat
               AND bidat = p_bidat
               AND bwdat = p_bwdat.
IF sy-subrc = 0.
    SORT i_keko1 BY kalnr kalka kadky tvers bwvar.
    SELECT kalnr kalka kadky tvers bwvar posnr typps kstar
           matnr menge gpreis
           FROM ckis
           INTO TABLE i_ckis_temp
           FOR ALL ENTRIES IN i_keko1
           WHERE kalnr = i_keko1-kalnr
             AND kalka = i_keko1-kalka
             AND kadky = i_keko1-kadky
             AND tvers = i_keko1-tvers
             AND bwvar = i_keko1-bwvar.
        IF sy-subrc = 0.
          SORT i_ckis_temp BY kalnr kalka kadky tvers bwvar.
          LOOP AT i_ckis_temp INTO wa_ckis_temp.
            wa_ckis-kalnr = wa_ckis_temp-kalnr.
            wa_ckis-kadky = wa_ckis_temp-kadky.
            wa_ckis-posnr = wa_ckis_temp-posnr.
            wa_ckis-typps = wa_ckis_temp-typps.
            wa_ckis-kstar = wa_ckis_temp-kstar.
            wa_ckis-matnr1 = wa_ckis_temp-matnr1.
            wa_ckis-menge = wa_ckis_temp-menge.
            wa_ckis-gpreis = wa_ckis_temp-gpreis.
          CLEAR wa_keko1.
          READ TABLE i_keko1 INTO wa_keko1
                             WITH KEY kalnr = wa_ckis_temp-kalnr
                                      kalka = wa_ckis_temp-kalka
                                      kadky = wa_ckis_temp-kadky
                                      tvers = wa_ckis_temp-tvers
                                      bwvar = wa_ckis_temp-bwvar
                                      BINARY SEARCH.
             IF sy-subrc = 0.
                wa_ckis-matnr = wa_keko1-matnr.
                wa_ckis-werks = wa_keko1-werks.
             ENDIF.
             APPEND wa_ckis TO i_ckis.
             CLEAR: wa_ckis_temp, wa_ckis.
          ENDLOOP.
        ENDIF.
    REFRESH: i_keko1, i_ckis_temp.
ENDIF.
endform.                    " get_keko_ckis

Hi Try minimising the conditions in where clause
     SELECT fields..... FROM CKIS
     WHERE KALNR = KEKO-KALNR AND
                  KADKY = KEKO-KADKY AND
                  TVERS = KEKO-TVERS AND
                  TYPPS = 'M'.
    after this, deleting unwanted records from internal table as per pending conditions...
Regds,
Anil

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

"An error occurred while extracting files from the package "BaseSystem.pkg".

Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB total

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Error occured in the data selection...urgent

Hi,
The master data(full update) is being pulled from R/3 to BW..while pulling it has thrown the error as below.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
when i checked in the error message it is showing as below
Incomplete control parameter for commmunication with the BW system
Errors in source system
The detailed error message is as below..................
Diagnosis
The control parameters for communication with the BW server are not
    complete. A BW PlugIn upgrade could be the cause of the problem.
System response
Procedure
Depending on the Release of the BW server, proceed as follows:
    BW Server Release 1.2B: Source system: Update InfoSource metadata
    BW Server Release >= 2.0A: Source system: Activate
I have spoken with basis they told that they have done Kernel updation for BW..please help me in resolving this ..
I have reran the infopackage still it is showin the same error..its very urgent
thanks in advance..points will be assigned..
regards,
Manjula

Hi Manjula,
May be that this the Partner profile settings problem....
Please check your partner profile settings in source system...
Login the sources system > goto Tcode:WE20 select the BW system>
check the all the settings one by one...
Thanks
Regards
Sathis
If it is useful assign the points...

Error occured in the Source system while loading mater data

hi all
While loadng the master data info package.The request is getting failed with error occured in the source system.
error message says "<b>if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request</b>".
   I had tried repeating the Request but again It is getting failed.
   please help me resolving the issue.
Thanks(=Points)
      Priya

Hello Priya
If u r loading thru flat file
1. Check the correct path in infopackage
2. Check if it is opened,if it is then close it and run package again
If loading thru R/3
1. Check DS is not opened in change mode
2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
3. Are you running init..then make sure no document is posted in R/3 side...
Thanks
Tripple k

Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

Hi this message appears after 2 hours downloading Mavericks in App Store :
an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
Same with "CMD + R"
Help...

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

Error message :"Error occurred in the data selection"

Hi All ,
When I am exracting a Delta from source I am getting this error mesage Error occurred in the data selection" can any one let me know how to slove this,
Thanks in Advance.
rao

Praveen,
In SM 37
In JobName i have given - *REQU_4683BBF4HXG4XW4ASQOSP6PJG
where REQU_4683BBF4HXG4XW4ASQOSP6PJG is Request no
User Name is -- *
then I had check all these
sched, Released, ready, active, Finished, cancelled
then executed
then i received the message no jobs are matches the selection criteria
thanks
prasanna

Error occured in the data selection while extract data from Source system

Similar Messages

Maybe you are looking for