Error occurred when determining the business system (NO_BUSINESS_SYSTEM)
Hi ,
I am working on a POC(ECC 6.0(proxy)>PI 7.1>(proxy)ECC 6.0).
I have created
1) IR objects.
2)Proxy generation & report program to fill the proxy structure.
3)ID objects. (reciever CC, RA, ID, RD)
I am getting below short dump on Sender ECC side,
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_AI_SYSTEM_FAULT', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Error (id=GET_BUSINESS_SYSTEM_ERROR): An error occurred when determining the
business system (NO_BUSINESS_SYSTEM)
pls let me know, what might be wrong.
santosh.
Hello,
You may need to create your business system and point it to the Integration Server on SLD.
Generally it acuses an error on tcode SDLCHECK, for this please check note #1143810.
Regards,
Caio Cagnani
Similar Messages
-
SAP ABAP Client proxy Errror occured when determining the Business system.
Dear Friends
I am trying to push data from ECC to PI and then MS-SQL Server. My SAP scenario is ABAP Proxy to JDBC
I have created on Enhancement Implementation for AS01 ( Asset Master creation). Here I am calling my ABAP proxy and uploading ANLA and ANLZ strucutre to my abap proxy. but I get the run time error. that suggest Error occurred while determining the Business system - SLD_API_Exception.
My all IR and ID objects are activated, I have tested the scenario successfully without error in ID,
When I check SM21 it suggest that error is due to XI is unable to access the SLD. Could_not_determine_sld_access_data.
SLDCHECK works fine in PI system.
SLDCHECK is failed in my ECCDEV 400 client System.
Is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly.
Please look the below link it contains the enhancement code of AS01 transaction code where I am calling abap proxy to send the data. Runtime analysis report, SM21 log, and SLDCHECK failed screen shot in 400 client. SLD working fine in PI system. my SLD is configured in SOLMAN system.
You can see the error and Code from this link -> [Code , Runtime Dump Analysis report, SM21 Log and SLDCHECK|http://www.scribd.com/doc/61192432/Sap-Abap-Proxy-Error]
Please help me How can I solve this ?
Regards
NaeemHi Naeem,
>>>is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly
YES...you need to configure SLD check in your ECC System also
Also check the links below for proxy connectivity step by step
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?quicklink=index&overridelayout=true
Regards,
Naveen -
Error Occured when deleting the Business Activity
Hi All,
I try to delete one record of the Business Activity, but there was an error.
The operation is as follows:
Business Activity->delete
After i press Yes, there was an error: At lease one entry could not be found in object buffer, the Message No. is CRM_ORDER_MISC106.
After pressing Enter, thre was another error: Administration header could not be found DE02500F7FC614F1A6C30017A43C63A4. Message No. CRM_ORDERADM_H004.
Who konw how to deal with this issue, please kindly to tell me, thanks a lot!
BonnieHi Bonnie,
Check your implementation of ORDER_SAVE BADI and in case if you have CRM_ORDER_READ FM make sure that you have the EXCEPTIOM part of this FM. What I ment is
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
no_change_allowed = 6
OTHERS = 7.
If you have this you should not get the error mentioned.
Hope this will help.
Thanks,
Vikash. -
Error in Determining the Business System??
Hello All,
I am using a client proxy from ECC 6.0. When I try to run it manually, it is giving error saying "GET_BUSINESS_SYSTEM_ERROR: An error occured when determining the business sytem
NO_BUSINESS_SYSTEM ".I have already created Business System.
What could be the reason for this.?? SLDCHECK is working fine. entries in RZ70 are also correct.
Same proxy in CRM 2007 system is working fine.Read,
ABAP Proxy error : GET_BUSINESS_SYSTEM_ERROR
Dump "GET_BUSINESS_SYSTEM_ERROR" when changing relationships.
They might help
Regards
Juan -
Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
MohammedHello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai -
:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19) -
Failed to execute with the error Error occurred when starting the parser: t
Dear All
I am getting this error
""A database error occurred. The database error text is: The MDX query SELECT { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
I already implemented note 1032461Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu.... -
An error occurred when loading the Cube ; Analysis services 2012
Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support -
Hello,
I'm not sure when (I suspect SQL 2012 SP1 CU3 and Windows Updates) reporting stopped working.
In Internet Explorer I have error:
An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)
Get
Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
In MSSRS logs lot of:
library!ReportServer_0-1!15f4!03/31/2015-00:00:42:: i INFO: Call to ListChildrenAction(/, False).
library!ReportServer_0-1!15f4!03/31/2015-00:00:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: , Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: An error occurred
when invoking the authorization extension. ---> System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: The type initializer for 'Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess' threw an exception. (Fault Detail is
equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
System.TypeInitializationException: The type initializer for 'Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess' threw an exception. ----> System.Exception: Exception decrypting. The specified file could not be decrypted
at Microsoft.EnterpriseManagement.Security.DPAPIWrapper.Decrypt(Byte[] cipherText)
at Microsoft.EnterpriseManagement.Security.AsymmetricKeyManager.Initialize(Byte[] publicKey)
at Microsoft.EnterpriseManagement.Security.SecureStorageManager.Initialize()
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess.get_secureStorageDatabaseManager()
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess..cctor()
--- End of inner ExceptionDetail stack trace ---
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess..ctor()
at CreateMicrosoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy()
at Syst...).
--- End of inner exception stack trace ---;
MSSRS version is
Microsoft SQL Server Reporting Services Version 2011.0110.5058.00.
I tried to delete all encrypted content, restart SQL and Reporting few times, install last Windows Update updates and don't have idea what to do more.
SQL and MSSRS services are working on domain accounts, nothing changes.Hi LukaszH,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!
One of the following steps should help.
Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Quit Safari.
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content: > "Enable Plug-ins".
or
Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box beside
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Check the box beside "Remove all website data".
Click "Reset".
5. Turn off Extensions, if any.
Safari > Preferences > Extensions
Now try YouTube.
Best. -
Error while exporting/transporting the Business system from Dev to Quality
Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
RameshGo through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful -
App-v 5.0 SP2 hotfix 5, an error occurred when querying the App-V WMI provider
Hi,
We have installed App-v 5.0 SP2 + hotfix 5 (via SCCM 2012 R2 CU1) on some Windows 7 clients. That worked fine but no app-v applications go through.
Error:
AppVPackageQueryClient5X::GetPackageDataByPackageGUID() failed for virtual application [a835fa1-f82a-4efe-957a-8c6678d4a431]. (0x87d01290) AppVHandler 5/08/2014 10:23:56 3440 (0x0D70)
CAppV5XHandler::DiscoverIndividuleApp() failed. (0x87d01290) AppVHandler 5/08/2014 10:23:56 3440 (0x0D70)
+++ Discovery of application [AppDT Id: ScopeId_8B8D93AF-5181-48FE-9202-2CFE5FC93EE2/DeploymentType_50eba242-3688-4b4f-9b61-84f0123f667d, Revision: 7] returned an error (0x87d01290). AppVHandler 5/08/2014 10:23:56
3440 (0x0D70)
CAppV5XHandler::DiscoverApp() failed. (0x87d01290) AppVHandler 5/08/2014 10:23:56 3440 (0x0D70)
Deployment type detection failed with error 0x87d01290. AppDiscovery 5/08/2014 10:23:56 3440 (0x0D70)
Failed to perform detection of app deployment type Microsoft - Console, revision 6) for user. Error 0x87d01290 AppDiscovery 5/08/2014 10:23:56 3440 (0x0D70)
Error = 0x87d01290 = An error occurred when querying the App-V WMI provider.
Please advise on this specific error. Should we look for corruption in app-v client, problem in sccm client ...?
J.
Jan Hoedt
Update: clients which don't have problems are client which had hotfix 4 THEN hotfix 5 installed. Should we install it that order? Client WITH problems have App-v 5.0 SP2 then hotfix 5 directly.
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.I think we found a solution ourselves.
My update2 (question) explains it:
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.
We installed App-v 5.0 SP2 via exe then installed hotfix via msp (extracted msp), this doesn't seem to work (though installation was succesfull). When we deploy the hotfix via the exe it works correctly.
Not sure why though.
Jan Hoedt -
Errors occured when compile the bpel process
Errors occurred when compile the bpel process using bpel designer for Eclipse:
(com.oracle.bpel.designer_0.9.13)
using PM: bpel_jboss_101200
More error infomation following:
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
[bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
[bpelc] __setOutgoingLinks(__sc, __ctx);
[bpelc] ^
[bpelc] 4 errors
BUILD FAILED
E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
Error in java files auto-generated when compiling ,why?
Thanks!when compiled again without any change, the same errors like above are not occurs
more info.
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
BUILD SUCCESSFUL
Total time: 9 seconds
BUT, some errors occurs in BPEL PM server and in Console the process is not available
more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
process "AboutTest" (version "1.0") compiled sucessfully
15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
AboutTest.bpel" ...
16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
16:25:35,015 INFO [STDOUT] retun true;
16:25:35,015 INFO [STDOUT] ^
16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
16:25:35,031 INFO [STDOUT] retun true;
16:25:35,031 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
xa.cube.engine.types.bpel.CXPartnerLink.
16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] 4 errors
16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
process "AboutTest" (version "1.0") compiled failed.
16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
can not compile the bpel class generated from "AboutTest".
16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
ube> <BaseCubeSessionBean::logError>
if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.bind(CubeProcessHolder.java:1257)
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadAndBind(CubeProcessHolder.java:870)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadArchive(CubeProcessHolder.java:812)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
sArchive(CubeEngine.java:985)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
an.loadProcessArchive(BPELDomainManagerBean.java:390)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
inerInterceptor.invoke(StatelessSessionContainer.java:683)
16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
nvokeNext(AbstractTxInterceptor.java:84)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
hTransactions(TxInterceptorCMT.java:282)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
(TxInterceptorCMT.java:148)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
oke(SecurityInterceptor.java:111)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
ogInterceptor.java:191)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
nalInvoke(StatelessSessionContainer.java:331)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
:709)
16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
Unknown Source)
16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
tch(ReflectedDispatcher.java:60)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:62)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:54)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
ion.java:82)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
ke(AbstractMBeanInvoker.java:197)
16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
eanServerImpl.java:473)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
e(LocalInvoker.java:97)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
e(InvokerInterceptor.java:90)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
(TransactionInterceptor.java:46)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
curityInterceptor.java:55)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
or.invoke(StatelessSessionInterceptor.java:100)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
Container.java:85)
16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sMonitorWork.run(CubeProcessMonitorWork.java:129)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
orkerJob.java:51)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
hreadPool.java:267)
16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
why?
thanks -
The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player. It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types." I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem. Any suggestions? Thanks.
JOddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!
Maybe you are looking for
-
Change of Source System in OBIA 7.9.6.4
hi All Our Client has decided to change the source system from EBS R11 to EBS R12.So they have completed EBS migration to R12.I have been asigned a job to configure the existing bi apps for the source EBS R12 which previosly was using EBS R11. Can an
-
Broadband connection won't work
I've tried all online instructions and nothing has worked what shall I do
-
Change defaut port for personal cloud
Hey, i own 3 iomega nas for a long time and never been able to use the personal cloud. What happens is my ISP blocks the defauts ports used by iomega for personal cloud, 80 and 443. I have already changed my ISP and looks like here in brazil the lowe
-
[SOLVED] Not booting after update to grub, syslinux
I did a system update trying to fix some package dependencies for a mongodb issue. I saw that there were changes to grub, so I stopped, and was good. I checked the home page, I checked the forums. The only thing I found was a thread saying that it
-
Clarification on details regarding getting data from APO into BW
Hi Friends, I need some clarification in terms of getting data from APO into BW for reporting: I observed that SAP has provided standard data flows for PPDS module, where as for the Demand Planning and Supply Network Planning SAP has just provided so