Error occurs during creation of Quotaion with reference to sales Order

hi all,
I have creating a new sales organization ID88 while i have the old sales org of ID10.When i try to create the sales order reference to the sales quotation,i have received an error mentioned "
Material xxx does not exist in storage location 5201 F100" then flw by another error
"Flow control: Entry SAPMV45B, RANG, R0, * , * , * is missing in T185"
FYI, the F100 is the storage location for ID10. The material xxx is created under the sales org ID88 with plant 5201 sloc F120.
Please kindly advise me on this.
Thank you.
Kah fei

Hi Mahajan,
I'm using the refence to the sales order, so it shud be the same before i manage to create the sales order i already receive that both error.
And i have check my material master, i have not extend my storage location to F100, the system kept on prompt me to enter that sloc.
Furthermore,MMBe will not show up to sloc F100,while for sloc F120 it will be up to the level of batch.
Thank you.

Similar Messages

Error occurs during creation of Quotaion with reference to Inquiry

Dear All,
When i am create Quotaion with reference to Inquiry for Export Customer it shows the Error:
Exchange rate of EUR in INR for date 00.00.0000 could not be determined
Message no. V1449
Diagnosis
You have entered a currency for which no valid exchange rate could be determined for the pricing date.
Procedure
Check whether a valid exchange rate for this currency exists for 00.00.0000.
If this is not the case, define an exchange rate in Customizing, providing you have the authorization to do this.
Also when click on error it shows another message like:
Flow control: Entry SAPMV45B, RANF, R1, * , * , * is missing in T185
Message no. V0102
I also maintained Exchange rate for EUR to INR & also for INR to EUR.
When i am create direct quotaion without reference it will create.
Plz give me Solution on the above problem.
Award pts for useful answer.
Thx & Regards,
Pankaj
Message was edited by:
Pankaj Mahajan

Pankaj,
Have you done below?
In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
ALSO Create new Inquiry & Quotation after saving exchange rate..and see if error is occuring..
Reward if this helps...
Regds
MM

Creation of IBase with reference to sales order for Configurable product.

Hi Experts,
Can any one tell me How to create Ibase with reference to sales order for Configurable Products. I know we can create this using IB63, but what i need to do in this Transaction code and what settings i need to do in SPRO.
pls send ur replies to [email protected]
Thank you..

Hi
You can create IBase using T-Code-IB53 and in there you can give Parent and child products.
A)Define Installed Base Category and Installation Rules-CRM
B)Define Object Families
C)Define default settings for equipment replication
D)Define Serial Number Profiles-ECC
E)Txn BF31-ECC
F)Set up attributes for individual objects
G)Set up set types
H)Set up category
I)Set up views
J)Allow reference product for IO
I hope it helps
If you require further help let me know.
Cheers
Raj

Oracle R12 Clone failing with RC-00118 Error occurred during creation of...

Im encountering the above error message i have seen the below thread which looks like the same issue, i was wondering if someone could confirm if the clone process requires an off-line backup on the source system for the clone process to work. Currently i'm using a tape backup which runs overnight, the system is up at the time of backup.
RC-00118: Error occurred during creation of database
Thanks

thanks for quick response, its a hot backup.
the steps ive followed are
1. adpreclone on source
2. apps,db,inst directories deleted on destination. (after services have of course been shutdown)
3. oracle variables removed from path
4. backup restored from tape
5. deleted program files/oracle/inventory directory
6. on cmd window run set PERL5LIB=
followed by perl adcfgclone.pl dbTier
is there anything ive missed?

Error During Delivery creation with reference to Sales order

Hi all,
I am confused while creating delivery order with reference to sales order as this error *" Number of copying routine for table VBKD is missing in Table TVCPL"* is coming again and again.
I have perhaps made all possible things in VTLA ( Copy sales doc to delivery doc) but still i m finding it difficult to remove it
Please guide me in it.

Hi,
You will need to make assignment from So item to Delivery item please check if copy control is maintained at item level. Also make sure that Copy controls are maintianed for the billing document from the SO & Delivery both as this would be the next step.

RC-00118: Error occurred during creation of database

adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.

Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Error occured during creation of oracle snapshot

Dear All,
I am getting error messange in my SAP Inbox in t.code SBWP.
In SBWP, the nessage text is as follow.
=============================
Error occured during creation of oracle snapshot (Creation aborted)
(Log see also transaction SLG1, Object ORASNAP, Subobject ORASNAPCR)
Oracle snapshot creation program aborted
Error while copying from oracle view to SAP table
Oracle view SAP$KCBFWAIT
SAP table ORA_SAPKCBFWAIT
Return code (ORA-....) 942
You tried to work with the name of a table or view that does not exist in the database
The table does not exist on the database. A table name or view name was used that does not exist on the database.
===============================
I also check in T.Code SLG1, but i am not getting the reason for this error.
Regards,
Nisit

Hi,
Check each of the following :
the spelling of the table or view name.
that a view is not specified where a table is required.
that an existing table or view name exists.
Contact the database administrator if the table needs to be created or if user or application privileges are required to access the table.
Also, if attempting to access a table or view in another schema, make certain the correct schema is referenced and that access to the object is granted.
Regards
Krishna

RC-00118: Error occurred during creation of database Raised by oracle.apps.

Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.

Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again.

RC-00118: Error occurred during creation of databas

On 11.5.9 with windows, while running the clone with the following command:
perl adcfgclone.pl dbTier
The following error occurs:
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506616 bytes
Fixed Size 452152 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u1/TEST/testora/testdata/system01.dbf'
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.zexsa.com"
ERROR at line 1:
ORA-01109: database not open
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:658)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:479)
I found note no. 375389.1 similar to this issue.
Any body guide me, about solution no-1, how i can apply it.
after running perl adcfgclone.pl dbTier
my DB is on above mentioned stage....

SQL*Plus: Release 10.2.0.4.0 - Production on Sun Feb 13 21:52:19 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 1271540 bytes
Variable Size 427821324 bytes
Database Buffers 633339904 bytes
Redo Buffers 11309056 bytes
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
SQL>

An error occurred during creation of the central repository. (BODI-300020)

I am trying to create a central repository for Data Service, the following error appear
Creating repository... (BODI-300026)
Reading SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms.sql>. (BODI-20002)
Reading SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms_content.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms_content.sql>. (BODI-20002)
Reading SQL file <C:\BO\DataServices_12\Admin\repo\options.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\Admin\repo\options.sql>. (BODI-20002)
Verifying repository... (BODI-300077)
Importing objects... (BODI-300036)
Adding Data Quality new substitution configuration... (BODI-300133)
An error occurred during creation of the central repository. (BODI-300020)
It's a sql DBMS, and the default user language is spanish, during the installation was the same issue.
The first installation user language was english and everything was ok, then the default user anguage was set to spanish and the jobs crashed because an english format was sent to the al_history table. I tried to recreate the repository and an error ocurrer during the creation.
has someone faced the same problem?

what is the version of Data Services ? if its 12.2, then there was a bug that is fixed in 12.2 SP1 (12.2.1.0), apply the SP1 or it would be better if you apply the latest fix pack for 12.2 i.e 12.2.1.2
the problem was with date format used in insert was different than the user's default date format.

Cloning Issue RC-00118: Error occurred during creation of database

Friends,
I execute following scripts on source system preclone.pl dbTier &perl adpreclone.pl appsTier
then take the cold source backup and transfer on another machine for cloning but when i am executing cloning script on db tier i am getting below mention error after 50% completion. I have very limited time and i cant go back on source system for fresh backup, please help me to sort out his issue.
-------------------ADX Database Utility Finished--------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
        at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyData
        at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDat
        at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyData
        at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier
        at sun.reflect.NativeConstructorAccessorImpl.newInstan
        at sun.reflect.NativeConstructorAccessorImpl.newInstan
        at sun.reflect.DelegatingConstructorAccessorImpl.newIn                      rce)
        at java.lang.reflect.Constructor.newInstance(Unknown S
        at oracle.apps.ad.clone.util.CloneProcessor.run(CloneP
        at java.lang.Thread.run(Unknown Source)
Hopes you will support.
Regards
Irfan Ahmad

plz check :
http://doganayn.blogspot.in/2013/11/rc-50004-fatal-error-occurred-in.html
Rapid Clone Failed While Running "Adcfgclone.pl dbTier": ORA-01194 and RC-00118 (Doc ID 375389.1)
Troubleshooting RapidClone issues with Oracle Applications R12 (Doc ID 603104.1)
Troubleshooting RapidClone issues with Oracle Applications 11i (Doc ID 364565.1)
Regards,
Haafiz

BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N

Hi Everybody,
       We are in ECC 5.0 version.
       I want to create a enhancement for Outbound Delivery Creation with reference to a Sales Order.
       Is any BAPI available for this ?
       Any input on this will be very much helpfull.
       Please suggest any BAPI available for this, or should I go for BDC using VL01N or VL04 ?
       Thanks in advance.
regards,
Nagarajan.J

Hi Nagarajan,
The BAPI BAPI_DELIVERYPROCESSING_EXEC meets your requirement. You can create delivery with reference to sales order.
The below is the sample code...
data:lt_request      like bapideliciousrequest
                                occurs 0 with header line,
       lt_createditems like bapideliciouscreateditems
                                occurs 0 with header line,
       lt_return       like bapiret2
                                occurs 0 with header line.
    lt_request-document_type      = 'A'.
    lt_request-document_numb      = vbeln.
    lt_request-document_item      = posnr.
lt_request-material           = matnr.
lt_request-plant              = werks.
lt_request-stge_loc           = lgort.
lt_request-quantity_base__uom = base_uom_qty.
lt_request-delivery_date      = sy-datum.
append lt_request.
call function 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
    DELIVERY_EXTEND       =
    TECHN_CONTROL         =
    tables
      request               = lt_request
      createditems          = lt_createditems
      return                = lt_return.
loop at lt_return where type = 'A'
                      or type = 'E'.
    exit.
endloop.
if sy-subrc <> 0.
Use the BAPI for Commit
    call function 'BAPI_TRANSACTION_COMMIT'
         exporting
              wait = 'H'.
endif.
Thanks
Ramakrishna

Creation of production order with reference to sales order

dear all guru's,
i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
regards
ujwal

Hi,
For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
So if your strategy group is already 40 then you need not change it.
However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
Hope this helps.
Revert if you have any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Sep 27, 2008 8:50 AM

BAPI for Outbound Delivery Creation with reference to Sales Order

Dear all,
I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction.
I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_DELIVERYPROCESSING_EXEC .
However, in 4.6B, that function module doesn't exist. Appreciate any suggestion and or workaround.
Thanks.
Steven
Edited by: Steven Khoo on Mar 25, 2010 7:13 AM
Edited by: Steven Khoo on Mar 25, 2010 7:14 AM

Not required anymore

Creation of Sales Delivery with reference to Sales Order

Hi SAP Team,
I tried making a Delivery with reference to Sales Order. Though in Item Category detemination of Delivery configuration, a separate
Item Category has been configured, but still System picks up the one in Sales Order. Is there a way to get different Item Category at Delivery level.
Also, for Subitems a different Item Category is proposed, but still it follows the same behaviour, which is at header level.
Is there any way to change it.
regards

Hi,
Maintain the required values in the T.Code "0184".
Or follow the path:
SPRO>Logistics Execution>Shipping>Deliveries>Define Item Category Determination in Deliveries.
You have maintained the similar values for your delivery type same as sales order type that were maintained in "VOV4" T.Code.
So that it getting the item category same as the sales order.
Change the values here,so that new item categories will be appeared in delivery.
Regards,
Krishna.

Error occurs during creation of Quotaion with reference to sales Order

Similar Messages

Maybe you are looking for