Error on field-XCHPF
Hi expert,
for the OBD was created with the fiedl XCHPF = " ".
& material is releated of batch management, for this case we need to update the field with value = X.
could you tell me where i can maintion the value-X & why it is not apperaring automaticaly?
any configuration is missing?
Thank you for a quick reply....:)
Regards
Nilu
how (with MM01 or other method) and when (before or after delivery creation) did your material get its batch management flag?
Similar Messages
-
While Doing F-28 error-Balancing field "Profit Center" in line 002 not fill
Hello Sir,
I am doing F-28 Customer Incoming Payment , i have clear three invoice against payment.
So when i post that entry system gives me error Balancing field "Profit Center" in line 002 not filled".
so that entry could not found profit center. (Document Splitting Activate)
So can i assign Customer reconciliation account in T code - FAGL3KEH and assign Common Profit Center there.
Plz guide me , if i will assign there recon account ?.
reply soon
Thanks
JHi James,
According to me, you have two options, either enter the PC at the time of document entry or Go to doc.splitting & uncheck the PC mandatory field under doc. splitting characteristics for GL accounting.
Your problem will get resolve by doing this.
Thanks & Regards
Anuj Agarwal -
MIRO Error - Balancing field "Profit Center" in line item 001 not filled
Dear Experts,
Recently we upgraded to ECC 6.0 from 4.6C. We implemented new GL functionality.
We have also introduced new Profit Centers and have updated the same in Material Master.
Now, the new Profit Centers are valid from 01.04.2009 till 31.12.9999.
Now my problem is while doing MIRO after 31.03.2009 for old PO's i.e. the PO's which were created before 01.04.2009 the system gives me error "Balancing field "Profit Center" in line item 001 not filled".
This is because for the particular line item it picks the profit center from material master, but the validity of that (NEW) profit center is from 01.04.2009 whereas I want to do the posting in back date i.e. for eg. 28.03.2009. Due to which it does not get any profit center.
How do I resolve this problem. Is there any exit or BADI to do the same.
Regards...Hi
There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
Pls check the settings. If any doubt, revert back.
Thanks & Best Regards,
rahul. -
Transfer Purchase Order - Error message "Field selection ZTR not defined"
Hi all,
I've customized a new transfer purchase order type : TRA.
When I go to ME21N and choose TRA type, SAP displays this error message :
"Field selection ZTR not defined
Message no. ME028
The field selection required by the system is not defined in table 162.
Further processing is currently not possible."
How can I fix that please ?
Regards,
Bahia.Hello,
Check in IMG - MM - Purchasing - Purchase order -define screen layout - Check any field selction ZTR has been configured. And also check in Purchasing - purchase order - define document types - your PO doc type has reference to field selection group ZTR - if yes change it..
Regards
Mahesh Naik -
F-32 error Balancing field "Profit Center" in line 001 not filled"
Hi expert,
my user is posting with transaction F-32 and has the following error:
Balancing field "Profit Center" in line 001 not filled"
i have the following situation after simulating:
001 04 0000010637 SCHOTT FORMA VITRUM 377.514,60
002 19A 0000010637 SCHOTT FORMA VITRUM 350.850,00- 26.664,60- A1
003 50 0002110100 T/VAT CH 26.664,60- A1
and if i make general ledger simulation i have this situation:
line post key gneral led.account amount profit center
1 04 1010100 T/AR trade 377.514,60 blank
2 19 2101100 T/Adv from cust 350.850,00- 2002000
3 50 2110100 T/VAT CH 26.664,60- 2009000
if i click on the first line i have as General Ledger Account 1010100 that has field status group with profit center optional and ther is no reference to CO object or material to find the profit center...but after my double click on the 001 line i don't find any field where insert the profit center.
On the seconed line i have sales order that gives the profit center, so that's ok.
I remind you that the document splitting is active on my sistem,.
How can i do? to avoid errorsHi
Classify G/L Accounts for Document Splitting is :
1000000 1009999 04000 Cash Account
1010000 2999999 01000 Balance Sheet Account
3000000 3999999 06000 Material
4000000 4999999 20000 Expense
6000000 6999999 30000 Revenue
7000000 7999999 40200 Exchange Rate Difference
And in Classify Document Types for Document Splitting for doc AB i have the following :
AB Accounting document 0000 0001 Unspecified posting Standard
Splitting Method 0000000002 Splitting: Customer, Vendor, Tax, Money, Co.Code Clearing
Business Transaction 0000 Unspecified posting
Transaction Variant 0001 Standard
Item category 01100 Company Code Clearing
Processing category 1 Splitting based on base item categories
Base items from:
u2022 Company code of the position to be processed
u2022 Blank Partner company code of the position to be processed
u2022 Blank check tax code ( could this flag help me)?
u2022 Blank check if cash disc related
Base item categories:
01000 Balance Sheet Account
01300 Cash Discount Clearing
02000 Customer
03000 Vendor
04000 Cash Account
05100 Taxes on Sales/Purchases
05200 Withholding Tax
06000 Material
07000 Fixed Assets
20000 Expense
30000 Revenue
40100 Cash Discount (Expense/Revenue/Loss)
40200 Exchange Rate Difference
All blank
Thanks -
Consistency error:more fields found in XML structure than specified in conv
Hi,
I am doing a File 0 RFC- File in PI 7.1 and facing the following error:
2009-12-07 09:45:05 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '20000000|3022|800.99|10.11.2009|Testing 22222|')', probably configuration error in file adapter (XML parser error)'
2009-12-07 09:45:05 Error File processing failed with com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '20000000|3022|800.99|10.11.2009|Testing 22222|')', probably configuration error in file adapter (XML parser error)'
my output file record structure :
DT_out
itab_out 0.........1
item 0...... unbounded
STR 0........1
So i have given in the receiver FCC parameters as:
Record structure : item
Content conversion parameters:
item.fieldFixedLengths 255
item.endSeparator 'nl'
could anyone pls help me in solving this error at the earliest.
thanksmy problem has been solved by giving the FCC parameters as shown below:
my output file record structure :
DT_out
itab_out 0.........1
item 0...... unbounded
STR 0........1
So i have given in the receiver FCC parameters as:
Record structure : item,ITAB_OUT
Content conversion parameters:
item.fieldFixedLengths 255
item.endSeparator 'nl'
ITAB_OUT.fieldFixedLengths 255
ITAB_OUT.endSeparator 'nl' -
Syntax error in field definition
Hello,
Does java sun default driver support data type BLOB? I need create a table name PERSONS, and then store it to Access Database. But, every time when I run the program, it shows the following message:
SQLException: [Microsoft] [ODBC Microsoft Access Driver]
Syntax error in field definition.
Below are the code, does any one have any idea about the problem?
import java.sql.*;
public class CreatePersons {
public static void main(String args[]) {
String url = "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=Database\\DB1.mdb";
Connection con;
String createString;
Statement stmt = null;
createString = "create table PERSONS " +
"(PersonName VARCHAR (20) NOT NULL, " +
"PersonPicture BLOB (64K) NOT NULL," +
"PRIMARY KEY( PersonName )" +
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,
stmt = con.createStatement();
stmt.executeUpdate(createString);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
Thanks,
DanielIt doesn't have anything to do with the java driver.
You are passing DDL. That goes directly to the MS Access interface (the ODBC driver and the supporting dlls.)
There are two possibilities.
- The ODBC driver (and support) does not allow you to create blobs.
- The syntax you are using is wrong (this would be my guess.)
For the second case you might try creating the table in Acces, then use tools->analyze->documentor to produce the SQL description for that table. Whatever it produces is probably the output that it expects. -
"[Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition
I am creating a program in Java which has a Database reference application.The Database I am using is MS Access.But whenever I am trying to run the program from DOS Prompt(ie executing the program:java <program name>) I am unable to connenct to the database.The compiling of the program doesn't show any error(ie javac <program name>) The following error is displayed at the DOS Prompt:
"[Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition."
Pls give me a detailed help report.If it is a Machine side problem do help me to solve it.Mine is a Compaq Presario Machine,OS:Windows 98,Database:MS Access(Office XP)
I request you to help me in this matter.Pls email ur responses to:
[email protected]
[email protected]hi there
did u configure ur ODBC setting if no then try these steps
================== ODBC Settings ========================
step 1 : go to control panel
step 2 : ODBC Data Sources
step 3 : click UserDSN Tab
step 4 : click ADD Button , Select Microsoft Access Driver , Finish
step 5 : Give Datasource Name as "DATABASE_NAMEXXX" , no double quotes
step 6 : use Select and select Database_NAME.mdb from <INSTALL DIRECTORY>\DATABASE_NAME.mdb
click ok , ok finish
<INSTALL DIRECTORY> is where yr database is
=========================================================
then in yr program
URL for yr database
"jdbc:odbc:DATABASE_NAMEXXX" // as name in step 5
and Driver is
"sun.jdbc.odbc.JdbcOdbcDriver"
if u done all these steps then check yr spelling of table and tabel field in yr program
hope this works for u
regards
Satinderjit -
While doing vl03n i get error balancing field profit center missing
while doing vl03n i get error balancing field profit center missing in line item 001
Hi,
Please check whether the Inheritance option is selection while activating the document splitting.
SPRO> Financial Accounting (New) > GL Accounting (New) > Business Transaction > DOcument Splitting > Activate Document Splitting
Regards,
SDNer -
Error: COUNT field incorrect in jdbc
hello
please help me out!!!!!! am trying to retrive data (ID) which was updated before in this program. now am getting error:COUNT field incorrect. and can it be displayed by using JOptionPane?
pst=con.prepareStatement("select ID from db1 where NAME=?,EMAIL=?");
ResultSet rs=pst.executeQuery();
while(rs.next()){
System.out.println(rs.getString(0));pawankarra wrote:
thnx for ur replay.........This should read:
Thanks for your reply.Notice the corrected spelling of three of the four words in the sentence (you could have misspelled all of them by using "4" instead of "for") and the use of only one period/fullstop at the end of the sentence.
In reply to your original question, the column numbers in JDBC start at 1, not at 0. So this line of code is the problem:
System.out.println(rs.getString(0));It should read:
System.out.println(rs.getString(1));And, being an autogenerated column, isn't it a numeric value? Do you really want to read it as a String? -
IE07 and error 'Maintain field selection for Fleet data in Equipment List'
Hi all,
When running transaction IE07 (multi-level equipment list) , I get the following error: 'Maintain field selection for Fleet data in Equipment List (Multilevel)'
I can't see where is the missing configuration point.
We have activated business function LOG_EAM_CI_3.
Have anyone encountered this error before?
Thanks,
P.Hi Narasimhan
Could you give more details ? where is located this setting?
Thanks,
P. -
Crystal Viewer error "This field name is not known"
I have MAS500 with crystal 10 that runs a report from a view in a SQL data base and it ran fine when only MAS500 and ABRA were installed on the terminal server. Then we installed a new product CribMaster that also uses Crystal 10. After CribMaster was installed we got the error "This field name is not known" from Crystal viewer. The report has a selection parametar . I feel that there is a dll file that got over written, but do not know which one. I can run the report from Crystal OK, but not from within the application.
Since you can run the report from Crystal OK, but not from within the application, I'd recommend trying to figure out the dlls loading, or not in the app. Use a utility such as [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] to determine the differences. Modules will compare the log results for you (Module menu, choose "Differences").
You may also want to consider contacting the app creators to see if they can help...
Ludek -
Error This Field Name is not Known Line...
hi,
on the one PC CRXI Deverloper Edition and Crystal Reports XI Runtime Files.msi are installed. The VBS-Scipt works perfect.
On an other PC only Crystal Reports XI Runtime Files.msi is installed.
Following error is displey:
"Error This Field Name is not Known Line 32"
http://www.bilderhoster.net/safeforbilder/251h16ca.jpgMoved to Legacy SDK forum.
VBS is no longer supported. Use ProcessMonitor to help you find the missing dependencies or registry permissions. -
Reason for Error "Unknown field type (28) encountered."
Hello,
I'm from Germany, so sorry for my English first.
I got the error "Unknown field type (28) encountered." when I run
a simple "SELECT * FROM system.functions" on my ADD-Database.
The solution for this problem is found in the KBA 2145730.
If I use the ADS DLLs v. 11.10.0.22 I got the error, but if I use the
ADS DLLs v. 9.10.0.35 everything is fine.
For solving other problems I think it would be better to use the newest
version, but in this case I can't. At this time it is not a problem, because
I can't find any real reason so that I must update for now, but nevertheless
I'd like to know, why this error occurs. What is type 28? Or (what real
would be great) can I make changes to my software, so that I can
avoid this problem? I hope you can help me with this "riddle" and wish
all of you a great day.
Greetings from Germany,
Gerit FreericksFor backwards compatibility the server will send different field types (i.e. char vs varchar, ansi vs unicode, etc).
The server determines this based on the ACE (Advantage Client Version). By swapping in new DLLs you are telling the server that you are running a newer client and it can send the newer field types etc for the system tables.
In addition to swapping the DLLs re-build the application with the new TDataSet (re-compile) and this should resolve your issue.
For the field types look at ACE.pas (or ACE.h) in the TDataSet (on the latest). It looks like 28 is an NMEMO (Unicode Memo field) -
Hi,
I have exported the data from two sources, MS-Excel and SAP Business One to Sap Business One (8.81). While exporting the data, I got the error "The field is too small to accept the data you attempt to add. try inserting or pasting less data" for the first time, Immediately when I run it again, it shows export successfully completed, but nothing is changed in the SAP Business One. Could you please provide the solution as early as possible?
Thanks & Regards,
Chaitanya.Bok
i solve the problem.i rezise the colomn size
thanks
Maybe you are looking for
-
How do I transfer non-iTunes purchases from an iPhone to iTunes on my MacBook?
Hi, My girlfriend has an iPhone with lots of music on that is ripped from CDs and synced using a computer she no longer has access to. How do I transfer this from the iPhone to an iTunes account on my MacBook Pro. Thanks!
-
ok. I started out with HDV footage. Imported that edited it native HD into final cut 5, didn't downconvert. Now I am trying to output the finished work onto a dv camera through firewire. At first i nested the HDV sequence into a NTSC sequence, but th
-
Why do I have 2 versions of the program pages on my mac after the update?
Why do I have 2 versions of the program pages on my mac after the update?
-
SUS-MM vs SUS-EBP (Extended CLassic Scenario)
Hi! We have an extended classic scenario already up and running between ERP->EBP system without XI usage. Now it is necessary to configure SUS integration for ASN creation purpose. As I can see SAP has 2 standard configuration guides: one for SUS-MM
-
I downloaded the DTM and everytime I go to open it, it shows up on the task manager, in the processes area, but does not open at all. Anyone have any thoughts on this, it's very frustrating. Am working with the Bold 9650 on DTM 6.0.0. At first, I in