Error on first reboot after install
Hi folks,
Hopefully someone can help me with this.
I am new to Solaris and unix in general, please bear with me.
I downloaded the ISO images for 8 2/02 and burned the disks. I installed from Software disk 1. The install proceeded normally as far as I can tell (oddly the first time I attempted an install using the disk marked INSTALLATION (stupid me), the install failed, this time it worked, I think) but when the system reboots, and attempts to load the OS, I get this:
"Starting Weblauncher....
Thye webstart launcher has terminated unexpectedly.
Press return key and a system reboot will take place on your machine"
I tried several reboots but, I continue to get the same message.
Any suggestions?
This system has previously run both Win2000 server and Linux so, I am pretty sure my HW is ok.
Thanks, Chris
Hi folks,
Hopefully someone can help me with this.
I am new to Solaris and unix in general, please bear with me.
I downloaded the ISO images for 8 2/02 and burned the disks. I installed from Software disk 1. The install proceeded normally as far as I can tell (oddly the first time I attempted an install using the disk marked INSTALLATION (stupid me), the install failed, this time it worked, I think) but when the system reboots, and attempts to load the OS, I get this:
"Starting Weblauncher....
Thye webstart launcher has terminated unexpectedly.
Press return key and a system reboot will take place on your machine"
I tried several reboots but, I continue to get the same message.
Any suggestions?
This system has previously run both Win2000 server and Linux so, I am pretty sure my HW is ok.
Thanks, Chris
Similar Messages
-
Fix for continuous reboot after installing Service Pack 3 in Windows XP
After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer.. -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
Error in staring JDev11g after installing on Vista.
Hi,
I am getting the following error while starting JDeveloper after installing.Can any one provide a pointer on what could be done to fix this.
java.io.IOException
at oracle.ide.marshal.xml.StructureIO.loadUsingSAX(StructureIO.java:251)
at oracle.ide.marshal.xml.StructureIO.loadImpl(StructureIO.java:167)
at oracle.ide.marshal.xml.StructureIO.loadImpl(StructureIO.java:156)
at oracle.ide.marshal.xml.HashStructureIO.load(HashStructureIO.java:46)
at oracle.ideimpl.extension.RoleManagerImpl.getRolePreferences(RoleManag
erImpl.java:80)
at oracle.ideimpl.extension.ExtensionManagerImpl.runRoleSelectionDialog(
ExtensionManagerImpl.java:1166)
at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
agerImpl.java:1029)
at javax.ide.Service.getService(Service.java:68)
at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(ExtensionR
egistry.java:400)
at oracle.ide.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.j
ava:176)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1348)
at oracle.ide.Ide.startup(Ide.java:698)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:72)
at oracle.ide.boot.PCLMain.main(PCLMain.java:64)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
190)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: org.xml.sax.SAXParseException: <Line 1, Column 1>: XML-20108: (Fatal
Error) Start of root element expected.
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
ngParser.java:373)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:314)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
at oracle.xml.jaxp.JXSAXParser.parse(JXSAXParser.java:292)
at oracle.ide.marshal.xml.StructureIO.parseWithSAX(StructureIO.java:266)So you tried to install jdev on your iPhone and got this error?
Come on help us to help you. Provide more info, check the forum sticky post 'read before posting'
Timo -
Error code 213.11 after installing trial version of Photoshop Elements
I keep getting Error Code 213.11 after installing the trail verison of Photoshop Elements. What or how can I fix this.
THANKS FOR YOUR QUICK ANSWER, UNFORTUNATELY THIS IS ALL FOREIGN TO ME, i TRIED FIDNING THE FLEX NET FOLDER AND COULDN'T FIND IT. dO YOU KNOW OF ANY OTHER SOFTWARE THAT ALLOWS YOU TO EASILY PUT YOUR PHOTOS INTO ALREADY EXISTING DIGITAL FRAMES, NOT A DIGITAL FRAME FOR YOUR COMPUTER, BUT WILL LET YOU ADD YOUR OWN FRAMES AND INSERT PHOTOS INTO THEM. i'M AT A WIT'S END ON WHAT TO DO, I'VE TRIED GIMP AND PAINT.NET AND WATCHED VIDEOS ON HOW TO DO THIS AND IT IS NOT ALLOWING ME TO DO IT LIKE IT SHOWS. iS THERE SOME OTHER FORMAT THAT THE DIGITAL EFFECTS FRAMES SHOULD BE IN OR THE PHOTOS, i'M LOSING IT I'VE SPENT COUNTLESS NIGHTS AND CAN'T FIND AN EASY PROGRAM TO LET ME DO THIS. THANKS FOR ANY HELP YOU CAN GIVE ME. LORI
-
New imaged machines fail to complete reboot after install
New imaged machines fail to complete reboot after install of 10.4.9 image
Running off both 10.4.9 Server and a 10.3.9 Server machines imaged from the same disk image and different disk images fail to reboot after imaging is complete. All machines go through various stages of reboot some initial most all the way to waiting for finder to boot up on desktop. Nothing is wrong with the items, installed the entire image is installed if you looking at the machines via firewire. All .nbi sets were created under 10.3.9 (to avoid 10.4.9 problems) all disk images with Disk Utility all .nbi with 10.3.9 Network Image utility.
Anyone any clues been driving me nuts for about a week and I have 500 ibooks to image.
Also the reference machines for the images are same ibooks that will be imaged, so its the same platform.
various Mac OS X (10.3.9)All is the same for me except I used a 10.4.9 server only to create the disk image using Disk utility, and all other work ison a 10.3.9 server. Greay or blue screen on reboot otherwise machines look fine.
I am having this same issue....
Order of events as follows...
Build image on source mac (10.4.9)
Create image on server for netinstall from source mac
(10.4.9)
Set Netinstall image on server via netboot (10.4.9)
Install Netinstall image on target mac via netboot on
server (10.4.9)
Installs fine and says successful.....Apon reboot all
i get is the grey screen with the apple and spinning
icon....Sits there and doesn't change....
On further inspection I notice that there are things
that are missing off target mac
very strange....Sounds like a broken System Image
Utility to me
Boz
Mac Pro 2.66ghz / PB
17inch 1.5/ G4 MDD 1.25DP/ MBP 1.83ghz/ Mac OS
X (10.4.8) -
Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1
Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
Error in Configuration Wizard
Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information
located at {0}, fix the problem, and run this configuration wizard again.
Leaving function StringResourceManager.GetResourceString
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
In event view I see this two errors:
1) First error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135580
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
2) Second error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
100
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135581
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
Please advise on next steps.
How can I successfully install SP1?
Thanks,
Alexcould you please share the upgrade log file, so that we understand the error?
did you reboot your server after the installation of SP1?
also try to clear the Config cache on the servers and then try again?
you can run this command on the server its failing
Get-SPProduct -local
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Getting error messages upon startup after installing Lab View 5.1.1.
I have recently purchased a DAQ system along with a computer, which uses a readout program written in Lab View. however, after installing Lab View 5.1.1 on this same system, I started getting some error messages and the readout program no longer works. Here are the error messages:
"The \SystemRoot\system32\drivers\nidmmk.dll device driver could not locate the entry point ?single PointWrite@mdsSimpleDIGPortPrimitive@@UAEXKKKAAJ@Z in driver Nidaq32K.sys"
as well as
"The ordinal 2011 could not be located in the dynamic link library nidaq32.dll. An error occurred while loading VT Digital buffer write.vi"
I would greatly appreciate any help I can get.Hello,
Installing LabVIEW should not effect an installation of NI-DAQ. However, it seems to me that we may have installed a different version of NI-DAQ on top of the current version. This is very possible because the old LabVIEW CD�s contain NI-DAQ on them.
In this case, there is not an easy solution, we could try uninstalling and reinstalling combinations, but it will probably save the most time and effort to uninstall all National Instruments products and reinstall them. The best way to do so is from the ADD or REMOVE Programs utility from the Control Panel. Then we want to remove the following registry keys (BE SURE TO BACKUP YOUR REGISTRY!!)
HKEY_CURRENT_USER\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed. If you have Administrative rights, and you still cannot delete these keys, that is also OK. Continue with the remainder of the process.
Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp", "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a different location. If you are concerned about keeping old virtual channels and your SCXI setup intact, then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
Once these steps are taken care of, we should have clean system. You probably want to reboot and then reinstall the software. You should install development environments first, and then install drivers.
Just let us know if this does not take care of the problem, or if you have any questions on how to complete a step of the process.
Best regards,
Justin T.
National Instruments
NOTE: Turning off virus scan programs greatly increases the speed of uninstalling and reinstalling. -
My iPhone 6+ keeps rebooting after installing iOS 8.3
I have a 128Gb iPhone 6+. When I downloaded and installed iOS 8.3 via WIFI, it went through the usual download sequence and then started continually rebooting. After about 20 or so reboots, I got a white screen with a carrier signal on the top left, a location icon and a grayed-out bluetooth icon and the battery level indicator on the top right, and a curious "information" icon (a letter "i" in a circle) at the bottom right of the screen.
I tried tapping on the "i" but got no response. Then the iPhone went into the reboot cycle again. After several reboot cycles, I got the same white screen again. Then the iPhone again started rebooting and hasn't stopped.
My iPhone 6+ has been problematic since I installed iOS 8.1.2. Several random reboots (about 4 cycles, before the iPhone returned to "normal") and some other issues that I didn't document.
I brought the iPhone to the nearest authorized Apple repair center. They said that they could not find any problem and neither could they duplicate the issue I experienced. They recommended that the next time reboots happened that I should make a video of the error. Also, they recommended that I keep all of the apps updated (which I conscientiously do). So I decided to make a log of all the errors since the iPhone was returned to me.
Here are the entries to my log:
iPhone 6+ Errors since March 30, 2015
218 apps not synced
Failure to Sync - 0xE800002D - The app was not installed on the iPhone because of an unknown error
iPhone self reboot during reinstallation of 218 apps not synced
Missing Google Authenticator settings.
AutoSMS app could not be reinstalled. Doesn't exist in App Store.
iPhone self reboot during phone call. Some apps reinstalling in background.
Could not download additional sound modules for Soundprism Pro. Still could not download modules after reinstalling app.
Noticed keyboard error when inputting Apple ID password. When pressing keys, instead of character pressed, a question mark appeared. Photo taken with another phone. Could not do a screenshot because iPhone screenshot would not work.
iPhone self reboot during text messaging. 9 apps updating (April 1, 2015, 11:30am)
Audible could not log in properly. Tried reinstalling app.
After manual reboot (cold reboot), screenshot functions works and no noticeable errors with keyboard.
Turned on full access for Fleksy , GIF and Symbols Keyboards. (April 1, 2015, 12:20 pm)
Noticed all 3rd party apps (Kindle, Audible, Dropbox, 1Password, YouTube) credentials need to be re inputted.
iPhone self reboot while testing GIF keyboard. Pasted an animated GIF on a test text message. Was able to paste GIF then phone rebooted. (April 1, 2015, 1:41pm) reboot took approximately 2mins.
GIF could not be pasted into Viber message. Also noticed screenshot function not working. (April 1, 2015, 1:53pm)
After cold reboot, screenshot function works. (April 1, 2015, 1:57pm).
iPhone self reboot while installing Ask Video9 apps. (April 2, 2014, 12:32am). Reboot time approximately 2mins.
Noticed standard keyboard error ("?s" when key is pressed) appeared. Also screenshot function not working.
After warm reboot (Home-Power key), all functions work. Reboot time approximately 1min.
iPhone self reboot while updating RoomScan Pro app and installing Via Crucis app. (April 2, 2015, 7:53am) Reboot time approximately 1min.
Screenshot function not working.
After warm reboot, screenshot function works. Reboot time approximately 2 mins.
iPhone self reboot while installing Way of the Cross app. (April 2, 2015, 8:03am) Reboot time approximately 1min.
Noticed a duplicate of this note appeared with time stamp 3mins apart from this note.
iPhone self reboot while typing update to this note (April 2, 2015, 8:07am) Reboot time approximately 1min.
Noticed that Way of the Cross app fully installed and 5 other apps updated. Looks like reboots happen after app updates or installations.
Noticed screenshot function not working.
iPhone self reboot while installing iMassExplained app. (April 2, 2015, 8:18am) Reboot time approximately 1min.
Noticed screenshot function working.
iPhone self reboot while installing Candy Tech app. (April 2, 2014, 1:00pm) Reboot time approximately 1min.
iPhone self reboot while installing Google Chrome app. (April 2, 2014, 2:42pm) Reboot time approximately 1min.
iPhone self reboot while playing music through a Bluetooth device. (April 2, 2015, 7:30pm) Reboot approximately 1min.
iPhone self reboot while scanning barcode for MyFitnessPal app. (April 3, 2014, 10:40pm) Reboot time approximately 1min.
Noticed Microsoft Word app not activating.
iPhone self reboot while checking App Store app. (April 3, 2015, 1:05am) Reboot time approximately 1min.
iPhone self reboot while using Microsoft Word app and Google Maps. (April 3, 2015, 1:15am) Reboot time approximately 1min.
Noticed "?s" when typing password for Apple ID (April 3, 2015, 4:40pm) Reboot time approximately 2mins.
Noticed that Movie ads not working in Subway Surfers. Then checked screenshot function. Screenshot function not working. March 3, 2015, 7:42pm.
Manual reboot corrected screenshot function. Movie ads still not working for Subway Surfers.
iPhone self reboot while changing lock screen with wallpaper created by Homescreen app. Also Quest Keeper app was installing (April 4, 2015, 1:35am) Reboot time approximately 1min.
Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working. But Passcode entry screen had Home Screen wallpaper instead of Lock Screen wallpaper and screen taps would not register. Passcode entry only working when the screen was tapped and swiped up from the camera icon. When camera was activated from the non working Passcode Entry Screen, a new working screen appeared allowing Passcode entry and after the screen, the camera app was opened.
iPhone self reboot while downloading Bible Gateway app. (April 4, 2015, 1:55am) Reboot time approximately 1min. Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working.
iPhone self reboot while downloading trying to change Home Screen wallpaper. (April 4, 2015, 2:05am) Reboot time approximately 1min. Still could not change either Lock or Home screen wallpaper.
iPhone self reboot sharing/emailing document from iMports app. (April 4, 2015, 10:57am) Reboot time approximately 1min.
iPhone self reboot while installing Candle app. (April 4, 2015, 9:40pm) Reboot time approximately 1min.
iPhone self reboot while adding picture to phone contact. (April 6, 2015, 2:47pm) Reboot time approximately 1min.
iPhone self reboot. (April 6, 2015, 2:49pm) Reboot time approximately 1min.
iPhone self reboot TWICE. (April 6, 2015, 4:11pm) Reboot time approximately 1min each. Fuzel Collage app was updating.
iPhone self reboot while using App Store. (April 6, 2015, 4:15pm) Reboot time approximately 1min.
iPhone self reboot while using App Store. (April 6, 2015, 7:42pm) Reboot time approximately 1min.
iPhone self reboots TWICE successively while installing 7IHS 2015 2Q app. (April 7, 2015, 9:37am) Reboot time approximately 1min per reboot.
iPhone self reboot. (April 7, 2015, 6:25pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 7:00pm) Reboot time approximately 1min.
iPhone self Renoir while using Bieber app. (April 7, 2015, 7:37pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 9:14pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 10:45pm) Reboot time approximately 1min.
iPhone self reboot while copying message from Viber app to iMessage. (April 8, 2015, 12:39pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:34pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:37pm) Reboot time approximately 1min.
Music shuffles by itself from one album to another.
iPhone self reboot while playing music. (April 8, 2015, 2:57pm) Reboot time approximately 2min.
iPhone self reboot while installing How To Tie A Tie app. (April 10, 2015, 12:12am) Reboot time approximately 2min.
iPhone self reboot while downloading iOS 8.3 update and writing a text message. (April 10, 2015, 7:25am) Reboot time approximately 1min.
I hope the details can help you diagnose the issue.
Thank you for all your help.Yeah my is the same. Ive had enough of it now...Its been a week of my phone crashing & apps crashing, camera crashing, call dropping out all the time. I've had enough. Apple have done nothing to help it. Ive an upgrade & myself & my partner are buying samsungs.
P.S I've downloaded both ios 8 & ios.8.2 straight from my PC.
I have done all of the above & phone is still unstable & crashes apps all the time. Right now as we speak whats app wont work.
Waited to long now...Apple are doing nothing to help anyone anymore. Company is going down the drain fast. -
Macbook pro won't reboot after installing lion
After installing Lion on a 2007 MacBook pro, it won't reboot. Just gets to the gray screen with the spinning wheel. Have tried re-installing and disk repair to no avail. Anyone else figured out how to fix?
alan81 wrote:
After installing Lion on a 2007 MacBook pro, it won't reboot. Just gets to the gray screen with the spinning wheel. Have tried re-installing and disk repair to no avail. Anyone else figured out how to fix?
Lion only runs on Intel based systems which have to be core2duo. with a minimum of 2GB RAM.
If these is given on your system, in most cases it comes from running old PPC-Applications which are not longer supported since Lion.
Try to start your MB in "Safe Mode" by holding option key (alt) imediately after first chime and disable / delete this applications.
Lupunus -
After installing SP3 UR7 Firefox shows an Exchange Error Message.
This occurs if using OWA by Firefox and opening the AutoReply or MailSettings Item.
It does not alway happen on the first run, but after clicking a second or third time to through the Items its always reproduceable.
OWA > ECP > E-Mail Organisation > Autoreply or Settings > Mail (should be sth. like this because its a German Version)
NS_ERROR_ILLEGAL_VALUE:
Client Information
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 Firefox/32.0
CPU Class: undefined
Platform: Win32
System Language: undefined
User Language: de-DE
CookieEnabled: true
Exception Details
Date: Wed Oct 01 2014 17:20:40 GMT+0200
Message: NS_ERROR_ILLEGAL_VALUE:
Url: https://192.168.xxx.xxx/ecp/14.3.210.2/Scripts/editorstandalone.js
Line: 1
Call Stack
ErrorHandling.showUnhandledException@https://192.168.xxx.xxx/ecp/14.3.210.2/Scripts/common.js:253:1202
Function.createDelegate/<@https://192.168.xxx.xxx/ecp/14.3.210.2/Scripts/microsoftajax.js:5:298
Detailed Call StackDoes FF have a debugging console that you can invoke when the error appears? Actually, it looks like it does:
https://developer.mozilla.org/en-US/docs/Tools/Web_Console
See if you can use it to find the exact function call that causes the error, and the parameter values.
OWA For SmartPhone -
Unable to reboot after installing Leopard
Unable to reboot, the fan keep on noising after the screen turns off for a long time, and the fan noise just keep on getting louder, and the computer did not start up again. This problem only happens after installing the Leopard.
Good news!
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. -
Automatic double reboot after installing update
Hello everyone,
After installing update 10.5.6, my computer automatically restarted twice (the double "bong" sound). I was wondering if this is an unusual occurrence or part of the normal system update sequence.
Have not had this occur previously and was wondering if anyone else had this effect when installing 10.5.6
Thanks.
joeMy iMac and my wife's MacBook both did the double reboot. It scared me the first time my iMac did the double reboot on 10.5.5 but this time I expected it. On my wife's MacBook it also had a firmware update and for the first time since we bought her computer I heard the fan going at a really high speed for a couple seconds and then stop. The fan has never since come on that fast so I guess it was the computer was just testing the fan.
-
Error In Starting Jboss after installing OIM server
Hi All,
I have Installed OIM_Server(OIM 9.1.0.1) ON Jboss server(4.2.3) , I have 1 GB RAM m/c so have JVM setting as -XMS512m -XMX768 m. While installation of OIM Server, it showed the success message. But When I am starting the server , to perform post installation check, it is showing following error message .
Does anybody have any ideas what the problem is? Please provide the possible solution.
Thanks to All :)
Error :
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Unable to retrieve orbjavax.management.InstanceNotFoundException: jboss:service=CorbaORB is not registered.
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linked java:comp/UserTransaction to JNDI name: UserTransaction
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] addEnvEntries
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceEnvRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkMessageDestinationRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbLocalRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkServiceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkSecurityDomain
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] No security-domain given, using default: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linking security/securityMgr to JNDI name: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] AbstractWebContainer.parseWebAppDescriptors, End
2009-07-16 18:43:27,401 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Using session cookies default setting
2009-07-16 18:44:02,667 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750044964, maxLifeAfterPassivation=1200000
2009-07-16 18:45:11,465 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSchedulerThread"
2009-07-16 18:45:11,465 ERROR [STDERR] java.lang.NoClassDefFoundError: org/quartz/core/JobRunShell
2009-07-16 18:45:11,465 ERROR [STDERR] at org.quartz.impl.StdJobRunShellFactory.borrowJobRunShell(StdJobRunShellFactory.java:86)
2009-07-16 18:45:11,465 ERROR [STDERR] at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:352)
2009-07-16 18:45:11,465 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: Unexpected error during load of: org.quartz.core.JobRunShell, msg=PermGen space
2009-07-16 18:45:11,465 ERROR [STDERR] at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:560)
2009-07-16 18:45:11,481 ERROR [STDERR] at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
2009-07-16 18:45:11,481 ERROR [STDERR] at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
2009-07-16 18:45:11,481 ERROR [STDERR] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
2009-07-16 18:45:11,481 ERROR [STDERR] ... 2 more
2009-07-16 18:45:11,481 ERROR [STDERR] Caused by: java.lang.OutOfMemoryError: PermGen space
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750126168, maxLifeAfterPassivation=1200000
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750133247, maxLifeAfterPassivation=1200000
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, doneI am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15" -
WIndows 7 Pro 64 bit rebooting after installing flash player 11.4
Hi There,
I was wondering if anyone could help me to solve the problem I am encountering with my home computer which after installing adobe flash player keeps on rebooting soon after it gets to the logon screen and other times whilst I am playing CSS via Valve or browsing the net.
Motherboard: Republic of Gamer ASUS Maximus Formula ii
CPU: Intel Core 2 Quad Q9550
GPU: ATI Saphire 4850 HD
OS: Windows 7 Pro 64 bit
Memory: 8 GB
Disk: 240 GB SSD
AV: McFee
If you could help me to solve this problem would be greatly appreciated.
Thanks
FernandoHi Jeromie,
Here is the driver details and dxdiag file attached.
System Information
Time of this report: 10/11/2012, 17:57:52
Machine name: PACMAN_PC
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: Maximus II Formula
BIOS: BIOS Date: 07/27/09 14:30:55 Ver: 08.00.14
Processor: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (4 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
Page File: 2154MB used, 14226MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: ATI Radeon HD 4800 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: ATI display adapter (0x9460)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9460&SUBSYS_E115174B&REV_00
Display Memory: 756 MB
Dedicated Memory: 1013 MB
Shared Memory: 3839 MB
Current Mode: 1920 x 1200 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: L246WHX
Monitor Id: GSM569D
Native Mode: 1920 x 1200(p) (59.950Hz)
Output Type: DVI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1129 (English)
Driver Version: 8.970.100.3000
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 7/4/2012 17:25:14, 1081856 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-D720-11CF-9270-1FC1BEC2C535}
Vendor ID: 0x1002
Device ID: 0x9460
SubSys ID: 0xE115174B
Revision ID: 0x0000
Driver Strong Name: oem13.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_RV7X:8.970.100.3000:pci\ven_1002&dev_9460
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Speakers (High Definition Audio Device)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_989B&SUBSYS_10438334&REV_1003
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Digital Audio (S/PDIF) (High Definition Audio Device)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_989B&SUBSYS_10438334&REV_1003
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Digital Audio (HDMI) (High Definition Audio Device)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_989B&SUBSYS_10438334&REV_1003
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Microphone (Microsoft LifeCam VX-1000.)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: USBAUDIO.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:43:54, 109696 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Microphone (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Microphone (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Line In (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: G9 Laser Mouse
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC048
FF Driver: n/a
Device Name: G9 Laser Mouse
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC048
FF Driver: n/a
Device Name: G9 Laser Mouse
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC048
FF Driver: n/a
Device Name: Logitech Gaming Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC221
FF Driver: n/a
Device Name: Logitech Gaming Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC221
FF Driver: n/a
Device Name: G15 Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC222
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x3A36
| Matching Device ID: usb\root_hub
| Service: usbhub
|
+-+ Generic USB Hub
| | Vendor/Product ID: 0x046D, 0xC223
| | Location: Port_#0002.Hub_#0007
| | Matching Device ID: usb\class_09
| | Service: usbhub
| |
| +-+ USB Input Device
| | | Vendor/Product ID: 0x046D, 0xC222
| | | Location: Port_#0004.Hub_#0010
| | | Matching Device ID: generic_hid_device
| | | Service: HidUsb
| | |
| | +-+ HID-compliant device
| | | | Vendor/Product ID: 0x046D, 0xC222
| | | | Matching Device ID: hid_device
| | | |
| | +-+ HID Keyboard Device
| | | | Vendor/Product ID: 0x046D, 0xC222
| | | | Matching Device ID: hid_device_system_keyboard
| | | | Service: kbdhid
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC048
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC221
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC232
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Logitech HID-compliant G9 Laser Mouse
| Vendor/Product ID: 0x046D, 0xC048
| Matching Device ID: hid\vid_046d&pid_c048&mi_00
| Upper Filters: LMouFilt
| Lower Filters: LHidFilt
| Service: mouhid
|
+ HID-compliant mouse
| Vendor/Product ID: 0x046D, 0xC231
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 127.0 GB
Total Space: 228.8 GB
File System: NTFS
Model: SanDisk SDSSDX240GG25 ATA Device
Drive: D:
Free Space: 165.6 GB
Total Space: 228.8 GB
File System: NTFS
Model: OCZ-AGILITY3 ATA Device
Drive: E:
Free Space: 312.0 GB
Total Space: 476.9 GB
File System: NTFS
Model: ST3500413AS ATA Device
Drive: Z:
Model: BENQ DVD DC DW220S ATA Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
System Devices
Name: High Definition Audio Controller
Device ID: PCI\VEN_1002&DEV_AA30&SUBSYS_AA30174B&REV_00\4&239521B6&0&0108
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 3 - 3A44
Device ID: PCI\VEN_8086&DEV_3A44&SUBSYS_82D41043&REV_00\3&11583659&0&E2
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A36
Device ID: PCI\VEN_8086&DEV_3A36&SUBSYS_82D41043&REV_00\3&11583659&0&EA
Driver: n/a
Name: Intel(R) 4 Series Chipset Processor to I/O Controller - 2E20
Device ID: PCI\VEN_8086&DEV_2E20&SUBSYS_82D31043&REV_02\3&11583659&0&00
Driver: n/a
Name: ATI Radeon HD 4800 Series
Device ID: PCI\VEN_1002&DEV_9460&SUBSYS_E115174B&REV_00\4&239521B6&0&0008
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
Device ID: PCI\VEN_8086&DEV_3A40&SUBSYS_82D41043&REV_00\3&11583659&0&E0
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A35
Device ID: PCI\VEN_8086&DEV_3A35&SUBSYS_82D41043&REV_00\3&11583659&0&E9
Driver: n/a
Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_82D41043&REV_90\3&11583659&0&F0
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_3A3E&SUBSYS_83341043&REV_00\3&11583659&0&D8
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A34
Device ID: PCI\VEN_8086&DEV_3A34&SUBSYS_82D41043&REV_00\3&11583659&0&E8
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_11AB&DEV_6121&SUBSYS_612111AB&REV_B1\4&116B1340&0&00E4
Driver: n/a
Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Device ID: PCI\VEN_8086&DEV_3A3C&SUBSYS_82D41043&REV_00\3&11583659&0&D7
Driver: n/a
Name: Intel(R) ICH10 Family SMBus Controller - 3A30
Device ID: PCI\VEN_8086&DEV_3A30&SUBSYS_82D41043&REV_00\3&11583659&0&FB
Driver: n/a
Name: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2
Device ID: PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&210273A0&0&00E3
Driver: n/a
Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Device ID: PCI\VEN_8086&DEV_3A3A&SUBSYS_82D41043&REV_00\3&11583659&0&EF
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD
Driver: n/a
Name: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
Device ID: PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&1C95CDEB&0&00E2
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
Device ID: PCI\VEN_8086&DEV_3A4A&SUBSYS_82D41043&REV_00\3&11583659&0&E5
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A39
Device ID: PCI\VEN_8086&DEV_3A39&SUBSYS_82D41043&REV_00\3&11583659&0&D2
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA
Driver: n/a
Name: VIA USB eXtensible Host Controller
Device ID: PCI\VEN_1106&DEV_3432&SUBSYS_34321106&REV_03\4&8372D40&0&00E5
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 5 - 3A48
Device ID: PCI\VEN_8086&DEV_3A48&SUBSYS_82D41043&REV_00\3&11583659&0&E4
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A38
Device ID: PCI\VEN_8086&DEV_3A38&SUBSYS_82D41043&REV_00\3&11583659&0&D1
Driver: n/a
Name: Intel(R) ICH10R LPC Interface Controller - 3A16
Device ID: PCI\VEN_8086&DEV_3A16&SUBSYS_82D41043&REV_00\3&11583659&0&F8
Driver: n/a
Name: VIA 1394 OHCI Compliant Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_81FE1043&REV_C0\4&1B359D48&0&18F0
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 4 - 3A46
Device ID: PCI\VEN_8086&DEV_3A46&SUBSYS_82D41043&REV_00\3&11583659&0&E3
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A37
Device ID: PCI\VEN_8086&DEV_3A37&SUBSYS_82D41043&REV_00\3&11583659&0&D0
Driver: n/a
Name: Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Device ID: PCI\VEN_8086&DEV_2E21&SUBSYS_82D31043&REV_02\3&11583659&0&08
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
ffdshow Video Decoder,0xff800001,2,1,ffdshow.ax,1.01.4369.0000
ffdshow raw video filter,0x00200000,2,1,ffdshow.ax,1.01.4369.0000
ffdshow Audio Decoder,0xff800001,1,1,ffdshow.ax,1.01.4369.0000
ATI Ticker,0x00200000,0,1,Ticker.ax,
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
ATI MPEG File Writer,0x00200000,1,0,atimpenc.dll,12.05.0000.20704
ATI MPEG Video Decoder,0x005fffff,1,2,atimpenc.dll,12.05.0000.20704
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
MMACE ProcAmp,0x00200000,0,2,MMACEFilters.dll,
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
ATI MPEG Audio Encoder,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
AMD MJPEG Decoder,0x00800001,1,1,atimpenc.dll,12.05.0000.20704
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
ATI MPEG Video Encoder,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
ATI MPEG Multiplexer,0x00200000,2,1,atimpenc.dll,12.05.0000.20704
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
MMACE SoftEmu,0x00200000,0,2,MMACEFilters.dll,
File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
ATI Video Scaler Filter,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835
MMACE DeInterlace,0x00200000,0,2,MMACEFilters.dll,
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
ffdshow Audio Processor,0x00200000,1,1,ffdshow.ax,1.01.4369.0000
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
ffdshow subtitles filter,0x00200000,2,1,ffdshow.ax,1.01.4369.0000
ATI Video Rotation Filter,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
ffdshow video encoder,0x00100000,1,1,ffdshow.ax,1.01.4369.0000
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
ffdshow Video Codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
VMnc v2,0x00200000,1,1,qcap.dll,6.06.7601.17514
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
ATI MPEG Audio Encoder,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
Audio Capture Sources:
Microphone (Microsoft LifeCam V,0x00200000,0,0,qcap.dll,6.06.7601.17514
Line In (High Definition Audio ,0x00200000,0,0,qcap.dll,6.06.7601.17514
Microphone (High Definition Aud,0x00200000,0,0,qcap.dll,6.06.7601.17514
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
WDM Streaming Capture Devices:
HD Audio Muxed capture,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Microsoft LifeCam VX-1000,0x00200000,0,1,LcProxy.ax,3.20.0240.0000
Microsoft LifeCam VX-1000.,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
WDM Streaming Rendering Devices:
HD Audio HDMI out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
HD Audio Speaker,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
Video Capture Sources:
Microsoft LifeCam VX-1000,0x00200000,0,1,LcProxy.ax,3.20.0240.0000
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Audio Renderers:
Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
Digital Audio (HDMI) (High Defi,0x00200000,1,0,quartz.dll,6.06.7601.17713
Digital Audio (S/PDIF) (High De,0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Digital Audio (HDMI) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0
Please advise
Thanks Jeromie
Fernando
Maybe you are looking for
-
Hello everybody out there, we're an IT business. We've bought several Adobe products in an auction. As the products are sold "as is", we don't know if they've been activated or not. We've bought those products in order to resell them. Does someone kn
-
How to convert Oracle function in UDB
Hi , i am writing this function in oracle.Could you please convert this function in UDB because i am new in this and dont know how to use decode function in UDB Please following is the code for oracle. CREATE OR REPLACE function fun ( localex varchar
-
IPhoto won't open after a reinstall.....
You'll have to excuse my lack of specific Mac details, as I'm relatively new on the system. I've got a Mac mini, had it for about 8 months, and the system froze up and would not restart. I talked to an associate in an Apple store, told me to reinstal
-
Unrepairable permission problems in some applications after hard crash.
Hi to all, this is yet another topic for a problem I have concerning permissions repair on the root HDD. After a hard crash where Finder couldn't be relaunched, I was forced down to a hard reboot (Still looking for OS X reliability :-$). Symptoms: I
-
Does online backup work well for OSX?
My external drive recently died, and my local backup failed (a string of bad bad luck). Good thing I have offsite backup, done with one of those cloud backup companies (backblaze). Right now I'm requesting for a hard drive mailed to me with my files